1
0
Fork 0

Add the ability to disable the USB startup check for Chibios

- Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection.
- Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active.
- Added documentation for both configuration flags as they were missing.
This commit is contained in:
yiancar 2018-08-24 15:38:31 +03:00 committed by Jack Humbert
parent 1a907a1627
commit 73a3399d0e
2 changed files with 11 additions and 0 deletions

View file

@ -248,3 +248,7 @@ Use these to enable or disable building certain features. The more you have enab
* Enable Bluetooth with the Adafruit EZ-Key HID
* `SPLIT_KEYBOARD`
* Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
* `WAIT_FOR_USB`
* Forces the keyboard to wait for a USB connection to be established before it starts up
* `NO_USB_STARTUP_CHECK`
* Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

View file

@ -142,10 +142,15 @@ int main(void) {
/* Wait until the USB or serial link is active */
while (true) {
#if defined(WAIT_FOR_USB) || defined(SERIAL_LINK_ENABLE)
if(USB_DRIVER.state == USB_ACTIVE) {
driver = &chibios_driver;
break;
}
#else
driver = &chibios_driver;
break;
#endif
#ifdef SERIAL_LINK_ENABLE
if(is_serial_link_connected()) {
driver = get_serial_link_driver();
@ -178,6 +183,7 @@ int main(void) {
/* Main loop */
while(true) {
#if !defined(NO_USB_STARTUP_CHECK)
if(USB_DRIVER.state == USB_SUSPENDED) {
print("[s]");
#ifdef VISUALIZER_ENABLE
@ -205,6 +211,7 @@ int main(void) {
visualizer_resume();
#endif
}
#endif
keyboard_task();
#ifdef CONSOLE_ENABLE