1
0
Fork 0

ARM split - detect USB to select master/slave (#6424)

* Initial split refactor to allow usb master detection

* Add split USB detect docs

* Add SPLIT_USB_DETECT demo mode limitation

* fix rebase issues

* clang-format
This commit is contained in:
Joel Challis 2019-10-12 04:25:43 +01:00 committed by Danny
parent 64c075ed2c
commit 76378d74f5
5 changed files with 49 additions and 9 deletions

View file

@ -267,6 +267,14 @@ There are a few different ways to set handedness for split keyboards (listed in
* 4: about 26kbps
* 5: about 20kbps
* `#define SPLIT_USB_DETECT`
* Detect (with timeout) USB connection when delegating master/slave
* Default behavior for ARM
* Required for AVR Teensy
* `#define SPLIT_USB_TIMEOUT 2500`
* Maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`
# The `rules.mk` File
This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

View file

@ -190,6 +190,18 @@ This sets how many LEDs are directly connected to each controller. The first nu
?> This setting implies that `RGBLIGHT_SPLIT` is enabled, and will forcibly enable it, if it's not.
```c
#define SPLIT_USB_DETECT
```
This option changes the startup behavior to detect an active USB connection when delegating master/slave. If this operation times out, then the half is assume to be a slave. This is the default behavior for ARM, and required for AVR Teensy boards (due to hardware limitations).
?> This setting will stop the ability to demo using battery packs.
```c
#define SPLIT_USB_TIMEOUT 2500
```
This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`.
## Additional Resources
Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information.

View file

@ -246,9 +246,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
#endif
void matrix_init(void) {
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
keyboard_split_setup();
// Set pinout for right half if pinout for that half is defined
if (!isLeftHand) {

View file

@ -14,8 +14,27 @@
# include "rgblight.h"
#endif
#ifndef SPLIT_USB_TIMEOUT
# define SPLIT_USB_TIMEOUT 2500
#endif
volatile bool isLeftHand = true;
bool waitForUsb(void) {
for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / 100); i++) {
// This will return true of a USB connection has been established
#if defined(__AVR__)
if (UDADDR & _BV(ADDEN)) {
#else
if (usbGetDriverStateI(&USBD1) == USB_ACTIVE) {
#endif
return true;
}
wait_ms(100);
}
return false;
}
__attribute__((weak)) bool is_keyboard_left(void) {
#if defined(SPLIT_HAND_PIN)
// Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
@ -31,21 +50,23 @@ __attribute__((weak)) bool is_keyboard_left(void) {
}
__attribute__((weak)) bool is_keyboard_master(void) {
#ifdef __AVR__
static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
// only check once, as this is called often
if (usbstate == UNKNOWN) {
#if defined(SPLIT_USB_DETECT) || defined(PROTOCOL_CHIBIOS)
usbstate = waitForUsb() ? MASTER : SLAVE;
#elif defined(__AVR__)
USBCON |= (1 << OTGPADE); // enables VBUS pad
wait_us(5);
usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
#else
usbstate = MASTER;
#endif
}
return (usbstate == MASTER);
#else
return true;
#endif
}
static void keyboard_master_setup(void) {
@ -59,8 +80,8 @@ static void keyboard_master_setup(void) {
static void keyboard_slave_setup(void) { transport_slave_init(); }
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
// this code runs before the keyboard is fully initialized
void keyboard_split_setup(void) {
isLeftHand = is_keyboard_left();
#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)

View file

@ -8,3 +8,4 @@
extern volatile bool isLeftHand;
void matrix_master_OLED_init(void);
void keyboard_split_setup(void);