1
0
Fork 0

[Docs] Remove some outdated FAQ items (#7607)

This commit is contained in:
fauxpark 2019-12-12 06:33:10 +11:00 committed by Drashna Jaelre
parent ccda62616d
commit 770a4ee729
9 changed files with 3 additions and 410 deletions

View file

@ -87,10 +87,6 @@ Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_fi
If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information. If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information.
## WINAVR is Obsolete
It is no longer recommended and may cause some problem.
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
## USB VID and PID ## USB VID and PID
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product. You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.

View file

@ -112,56 +112,6 @@ In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't s
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
## Bootloader Jump Doesn't Work
Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**.
```
# Size of Bootloaders in bytes:
# Atmel DFU loader(ATmega32U4) 4096
# Atmel DFU loader(AT90USB128) 8192
# LUFA bootloader(ATmega32U4) 4096
# Arduino Caterina(ATmega32U4) 4096
# USBaspLoader(ATmega***) 2048
# Teensy halfKay(ATmega32U4) 512
# Teensy++ halfKay(AT90USB128) 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
```
AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**.
AVR Boot section is located at end of Flash memory like the followings.
```
byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-4KB | | 128KB-8KB
0x6000 +---------------+ 0x1E000 +---------------+
| Bootloader | 4KB | Bootloader | 8KB
0x7FFF +---------------+ 0x1FFFF +---------------+
byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-512B | | 128KB-2KB
0x7E00 +---------------+ 0x1FC00 +---------------+
| Bootloader | 512B | Bootloader | 2KB
0x7FFF +---------------+ 0x1FFFF +---------------+
```
And see this discussion for further reference.
https://github.com/tmk/tmk_keyboard/issues/179
If you are using a TeensyUSB, there is a [known bug](https://github.com/qmk/qmk_firmware/issues/164) in which the hardware reset button prevents the RESET key from working. Unplugging the keyboard and plugging it back in should resolve the problem.
## Special Extra Key Doesn't Work (System, Audio Control Keys) ## Special Extra Key Doesn't Work (System, Audio Control Keys)
You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK. You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
@ -194,24 +144,6 @@ If you would like to keep JTAG enabled, just add the following to your `config.h
#define NO_JTAG_DISABLE #define NO_JTAG_DISABLE
``` ```
## Adding LED Indicators of Lock Keys
You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
## Program Arduino Micro/Leonardo
Push reset button and then run command like this within 8 seconds.
```
avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
```
Device name will vary depending on your system.
http://arduino.cc/en/Main/ArduinoBoardMicro
https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
## USB 3 Compatibility ## USB 3 Compatibility
I heard some people have a problem with USB 3 port, try USB 2 port. I heard some people have a problem with USB 3 port, try USB 2 port.

View file

@ -67,24 +67,8 @@ After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in y
Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.*** Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.***
## Input Special Characters Other Than ASCII like Cédille 'Ç' ## Input Special Characters Other Than ASCII like Cédille 'Ç'
NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define **MACRO** in way specific to your OS or layout.
See this post for example **MACRO** code. See the [Unicode](feature_unicode.md) feature.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
On **Windows** you can use `AltGr` key or **Alt code**.
* http://en.wikipedia.org/wiki/AltGr_key
* http://en.wikipedia.org/wiki/Alt_code
On **Mac** OS defines `Option` key combinations.
* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
On **Xorg** you can use `compose` key, instead.
* http://en.wikipedia.org/wiki/Compose_key
And see this for **Unicode** input.
* http://en.wikipedia.org/wiki/Unicode_input
## `Fn` Key on macOS ## `Fn` Key on macOS
@ -130,51 +114,6 @@ https://github.com/tekezo/Karabiner/issues/403
See the [Grave Escape](feature_grave_esc.md) feature. See the [Grave Escape](feature_grave_esc.md) feature.
## Arrow on Right Modifier Keys with Dual-Role
This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.
```
#include "keymap_common.h"
/* Arrow keys on right modifier keys with TMK dual role feature
*
* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
* https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
*/
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: qwerty */
[0] = LAYOUT( \
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
[1] = LAYOUT( \
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
[1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
[2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
[3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
[4] = ACTION_LAYER_MOMENTARY(1),
[5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
[6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
[7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
[8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
};
```
Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
## Eject on Mac OSX ## Eject on Mac OSX
`KC_EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250 `KC_EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250
It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default. It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default.

View file

@ -86,10 +86,6 @@ Relancer le script d'installation de QMK (`./util/qmk_install.sh` situé dans r
Si vous rencontrez toujours des problèmes, essayez de télécharger et lancer Zadig. Voir [Installation du driver du bootloader avec Zadig](driver_installation_zadig.md) pour plus d'informations. Si vous rencontrez toujours des problèmes, essayez de télécharger et lancer Zadig. Voir [Installation du driver du bootloader avec Zadig](driver_installation_zadig.md) pour plus d'informations.
## WINAVR est obsolète
Il n'est plus recommandé et peut causer des problèmes. Voir [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
## USB VID et PID ## USB VID et PID
Vous pouvez utiliser l'ID de votre choix en modifier `config.h`. Il y a peu de chance de conflit avec d'autres produits. Vous pouvez utiliser l'ID de votre choix en modifier `config.h`. Il y a peu de chance de conflit avec d'autres produits.

View file

@ -104,58 +104,6 @@ En C, `1` implique un type [int] qui est [16 bits] pour les AVR, ce qui implique
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
## Bootloader Jump ne fonctionne pas
Configurez correctement la taille du bootloader dans le **Makefile**. Une mauvaise taille de section du bootloader empêchera probablement le démarrage avec **Magic command** et **Boot Magic**.
```
# Size of Bootloaders in bytes:
# Atmel DFU loader(ATmega32U4) 4096
# Atmel DFU loader(AT90USB128) 8192
# LUFA bootloader(ATmega32U4) 4096
# Arduino Caterina(ATmega32U4) 4096
# USBaspLoader(ATmega***) 2048
# Teensy halfKay(ATmega32U4) 512
# Teensy++ halfKay(AT90USB128) 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
```
La taille de la section de démarrage de AVR est définie par l'option **BOOTSZ** fuse. Vérifiez la fiche technique du MCU. Veuilez noter que les tailles et adresses sont définies en **Word** (2 octets) dans la fiche technique alors que TMK utilise des **Byte**.
La section de boot AVR se trouve à la fin de la mémoire flash, comme suit.
```
byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-4KB | | 128KB-8KB
0x6000 +---------------+ 0x1E000 +---------------+
| Bootloader | 4KB | Bootloader | 8KB
0x7FFF +---------------+ 0x1FFFF +---------------+
byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-512B | | 128KB-2KB
0x7E00 +---------------+ 0x1FC00 +---------------+
| Bootloader | 512B | Bootloader | 2KB
0x7FFF +---------------+ 0x1FFFF +---------------+
```
Référez-vous à cette discussion pour plus de référence.
https://github.com/tmk/tmk_keyboard/issues/179
Si vous utilisez un TeensyUSB, il y a un [bug connu](https://github.com/qmk/qmk_firmware/issues/164) qui fait que le bouton reset matériel empêche la touche RESET de fonctionner. Débrancher et rebrancher le clavier devrait résoudre le problème.
## Les touches spéciales ne fonctionnent pas (Touche Système, Touches de contrôle du son) ## Les touches spéciales ne fonctionnent pas (Touche Système, Touches de contrôle du son)
Vous devez définir `EXTRAKEY_ENABLE` dans le fichier `rules.mk` pour les utiliser dans QMK. Vous devez définir `EXTRAKEY_ENABLE` dans le fichier `rules.mk` pour les utiliser dans QMK.
@ -189,25 +137,6 @@ Si vous voulez garder JTAG activé, ajoutez la ligne suivante à votre fichier `
#define NO_JTAG_DISABLE #define NO_JTAG_DISABLE
``` ```
## Adding LED Indicators of Lock Keys
Si vous souhaitez votre propre indicateur LED pour CapsLock, ScrollLock et NumLock alors lisez ce post.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
## Programmer Arduino Micro/Leonardo
Appuyez sur le bouton reset puis lancez la commande suivante dans les 8 secondes.
```
avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
```
Le nom du périphérique peut varier en fonction de votre système.
http://arduino.cc/en/Main/ArduinoBoardMicro
https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
## Compatibilité USB 3 ## Compatibilité USB 3
Il semble que certaines personnes ont eu des problèmes avec les ports USB 3, essayez un port USB 2. Il semble que certaines personnes ont eu des problèmes avec les ports USB 3, essayez un port USB 2.

View file

@ -72,24 +72,7 @@ Des vieux claviers mécaniques ont parfois des touches à verrouillage, mais les
## Ajouter des caractères spéciaux autres que ASCII comme la cédille 'Ç' ## Ajouter des caractères spéciaux autres que ASCII comme la cédille 'Ç'
IL N'EXISTE AUCUNE METHODE UNIVERSELLE POUR LES AJOUTER QUI FONCTIONNE SUR TOUS LES SYSTEMES. Vous devez définir une **MACRO** d'une manière spécifique à votre OS ou layout. Voir la fonctionnalité [Unicode](feature_unicode.md).
Voir ce post pour un exemple de code **MACRO**.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
Sous **Windows** vous pouvez utiliser la touche `AltGr` ou **Alt code**.
* http://en.wikipedia.org/wiki/AltGr_key
* http://en.wikipedia.org/wiki/Alt_code
Sous **Mac OS** définissez une combinaison de touche `Option`.
* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
Sous **Xorg** vous pouvez utiliser une touche `compose` à la place.
* http://en.wikipedia.org/wiki/Compose_key
Et voir ceci pour une entrée **Unicode**.
* http://en.wikipedia.org/wiki/Unicode_input
## Touche `Fn` sur macOS ## Touche `Fn` sur macOS
@ -144,54 +127,6 @@ Cette fonctionnalité permet d'utiliser une touche à la fois comme touche Écha
Voir la fonctionnalité [Grave Escape](feature_grave_esc.md). Voir la fonctionnalité [Grave Escape](feature_grave_esc.md).
## Avoir les touches modificatrices qui ont double usage en flèches directionnelles.
Ceci transforme les touches "modificateur droit" en touches fléchées lorsque les touches sont seulement "tapées" tout en restant des modificateurs lorsqu'elles sont maintenues.
Dans TMK la fonction double rôle s'appelle **TAP**.
```C
#include "keymap_common.h"
/* Arrow keys on right modifier keys with TMK dual role feature
*
* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
* https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
*/
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: qwerty */
[0] = LAYOUT( \
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
[1] = LAYOUT( \
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
[1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
[2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
[3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
[4] = ACTION_LAYER_MOMENTARY(1),
[5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
[6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
[7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
[8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
};
```
Touches double rôle : https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
## Eject sur Mac OSX ## Eject sur Mac OSX
Le keycode`KC_EJCT` fonctionne sous OSX. https://github.com/tmk/tmk_keyboard/issues/250 Le keycode`KC_EJCT` fonctionne sous OSX. https://github.com/tmk/tmk_keyboard/issues/250

View file

@ -56,11 +56,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
?> 事实上没有一个驱动的最佳选择有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。 ?> 事实上没有一个驱动的最佳选择有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。
如果bootloader在设备列表中没有显示你可能要使能 "List all devices"选项在选项菜单中`Options`然后找到有问题的bootloader设备。(译者注在win10中可能为 查看-显示隐藏的设备) 如果bootloader在设备列表中没有显示你可能要使能 "List all devices"选项在选项菜单中`Options`然后找到有问题的bootloader设备。(译者注在win10中可能为 查看-显示隐藏的设备)
## WINAVR已淘汰
不再推荐使用WINAVR使用可能会导致问题
详情请见[TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
## USB VID 和 PID ## USB VID 和 PID
你可以在编辑`config.h`时使用任何你想用的ID值。实际上使用任何可能未使用的ID都没有问题除了有极低的与其他产品发生冲突的可能性。 你可以在编辑`config.h`时使用任何你想用的ID值。实际上使用任何可能未使用的ID都没有问题除了有极低的与其他产品发生冲突的可能性。

View file

@ -101,56 +101,6 @@ https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switc
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
## Bootloader跳转不好用
在**Makefile**中正确配置**Makefile**大小。如果分区大小不正确,引导加载程序可能无法从**Magic command**和**Boot Magic**加载。
```
# bootloader字节数
# Atmel DFU loader(ATmega32U4) 4096
# Atmel DFU loader(AT90USB128) 8192
# LUFA bootloader(ATmega32U4) 4096
# Arduino Caterina(ATmega32U4) 4096
# USBaspLoader(ATmega***) 2048
# Teensy halfKay(ATmega32U4) 512
# Teensy++ halfKay(AT90USB128) 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
```
AVR引导大小是通过**BOOTSZ**熔丝位来设置的。查阅你单片机的datasheet。
记住datasheet用的是**Word**(2字节)表示大小和地址TMK用的是**Byte**。
AVR引导部分位于闪存的末尾如下所示Application是应用区Bootloader是引导区
```
byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-4KB | | 128KB-8KB
0x6000 +---------------+ 0x1E000 +---------------+
| Bootloader | 4KB | Bootloader | 8KB
0x7FFF +---------------+ 0x1FFFF +---------------+
byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+
| | | |
| | | |
| Application | | Application |
| | | |
= = = =
| | 32KB-512B | | 128KB-2KB
0x7E00 +---------------+ 0x1FC00 +---------------+
| Bootloader | 512B | Bootloader | 2KB
0x7FFF +---------------+ 0x1FFFF +---------------+
```
详情请见下方issue。
https://github.com/tmk/tmk_keyboard/issues/179
如果你使用TeensyUSB, 有一个[已知bug](https://github.com/qmk/qmk_firmware/issues/164)硬件重置按钮阻止软件定义重置键工作。重新插拔键盘就好了。
## 特殊额外键不起作用(系统,音频控制键) ## 特殊额外键不起作用(系统,音频控制键)
你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。 你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。
@ -173,24 +123,6 @@ EXTRAKEY_ENABLE = yes # 音频控制和系统控制
Arduino Leonardo和micro使用**ATMega32U4**该芯片TMK可用但Arduino的bootloader会导致问题。 Arduino Leonardo和micro使用**ATMega32U4**该芯片TMK可用但Arduino的bootloader会导致问题。
## 为锁定键添加指示灯
你要自制CapsLock, ScrollLock 和 NumLock指示灯见下文。
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
## 为Arduino Micro/Leonardo编程
按下重置键然后在8秒内运行下方这样的命令。
```
avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
```
设备名称因系统而异。
http://arduino.cc/en/Main/ArduinoBoardMicro
https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
## USB 3 兼容性 ## USB 3 兼容性
据传说有些人用USB3接口会有问题用USB2的试试。 据传说有些人用USB3接口会有问题用USB2的试试。

View file

@ -66,24 +66,8 @@ https://github.com/tmk/tmk_keyboard/issues/67
远古机械键盘偶尔会有自锁机械开关,现在几乎没有了。***大多数情况下你不需要使用该功能,且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。*** 远古机械键盘偶尔会有自锁机械开关,现在几乎没有了。***大多数情况下你不需要使用该功能,且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。***
## 输入ASCII之外的特殊字符比如Cédille 'Ç' ## 输入ASCII之外的特殊字符比如Cédille 'Ç'
没有在所有系统中输入这个的通用方法。你要定义针对你的特定操作系统或布局的**宏**。
比如看这个**宏**代码的文章。 请见[Unicode](feature_unicode.md)功能。
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
<!--翻译问题:下方维基百科链接应全部替换为中文链接,暂未找到全部-->
在**Windows**上,可以用`AltGr`键或**Alt码**。
* http://en.wikipedia.org/wiki/AltGr_key
* https://zh.wikipedia.org/wiki/Alt%E7%A0%81
在**Mac OS**定义`Option`键组合。
* https://zh.wikipedia.org/wiki/Option%E9%94%AE#%E6%9B%BF%E4%BB%A3%E9%94%AE%E7%9B%98%E8%BE%93%E5%85%A5
在**Xorg**可以改用`compose`键。
* http://en.wikipedia.org/wiki/Compose_key
下方链接查看**Unicode**输入。
* http://en.wikipedia.org/wiki/Unicode_input
## macOS上的`Fn` ## macOS上的`Fn`
@ -136,51 +120,6 @@ https://github.com/tekezo/Karabiner/issues/403
请见[Grave Escape](feature_grave_esc.md)功能。 请见[Grave Escape](feature_grave_esc.md)功能。
## 右侧双角色修改键(诸如Shift、Alt等有修改其他键作用的键)变箭头键
右侧修改键单击时会变为箭头键长按就还是修改键。在TMK中双角色键称之为**TAP**.
```
#include "keymap_common.h"
/* 用TMK双角色键功能实现右侧修改键改箭头键
*
* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
* https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
*/
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: qwerty */
[0] = LAYOUT( \
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
[1] = LAYOUT( \
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
[1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
[2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
[3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
[4] = ACTION_LAYER_MOMENTARY(1),
[5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
[6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
[7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
[8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
};
```
双角色键说明: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
## Mac OSX的弹出键 ## Mac OSX的弹出键
`KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250 `KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250
似乎Windows10会忽略该键码Linux/Xorg可以识别该键码但默认不映射。 似乎Windows10会忽略该键码Linux/Xorg可以识别该键码但默认不映射。