Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branch 'origin/master' into develop

Browse source
This commit is contained in:
QMK Bot 2021-10-16 16:03:50 +00:00
commit 776e6b8d37
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
keyboards/ploopyco/trackball_nano/readme.md
View file

@ -2,7 +2,7 @@
# Ploopy Trackball Nano # Ploopy Trackball Nano
![Ploopyco Trackball Nano](https://www.ploopy.co/uploads/b/113cb4122f867acc306a72a2741c5237a9b1d0db13abfe4e8e394cd466c4a311/_MG_7710_1614037372.jpg) ![Ploopyco Trackball Nano](https://ploopy.co/wp-content/uploads/2021/06/2.jpg)
It's a DIY, QMK Powered Trackball...Nano! It's a DIY, QMK Powered Trackball...Nano!
@ -28,7 +28,7 @@ Occasionally, new revisions of the PCB will be released. Every board comes with
Match the firmware that you flash onto the board with the designator on the board. Match the firmware that you flash onto the board with the designator on the board.
# Customzing your Ploopy Nano Trackball # Customizing your Ploopy Nano Trackball
You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default. You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default.
@ -51,4 +51,4 @@ When flashing the bootloader, use the following fuse settings:
|----------|-------------| |----------|-------------|
| Low | `0x5E` | | Low | `0x5E` |
| High | `0x99` | | High | `0x99` |
| Extended | `0xC3` | | Extended | `0xC3` |