Add mechlovin9 rev2 PCB (#12767)

* Add mechlovin9 rev2 PCB

Move mechlovin9 PCB from mechlovin/hannah65/mechlovin9 to mechlovin/mechlovin9
And add mechlovin9 rev.2

* update

* change bootloader and  bootmagic button

* Add mechlovin9 rev2 PCB

Move mechlovin9 PCB from mechlovin/hannah65/mechlovin9 to mechlovin/mechlovin9
And add mechlovin9 rev.2

keyboards/mechlovin/hannah65/hannah65.h

@@ -20,6 +20,4 @@
 
 #if defined(KEYBOARD_mechlovin_hannah65_rev1)
 #    include "rev1.h"
-#elif defined(KEYBOARD_mechlovin_hannah65_mechlovin9)
-#    include "mechlovin9.h"
 #endif

keyboards/mechlovin/hannah65/mechlovin9/config.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#define PRODUCT_ID   0x6509
-#define DEVICE_VER   0x0001
-#define PRODUCTION   Mechlovin9

keyboards/mechlovin/hannah65/rev1/config.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#define PRODUCT_ID   0x6500
-#define DEVICE_VER   0x0001
-#define PRODUCTION   Hannah65

keyboards/mechlovin/hannah65/rev1/haus/config.h

@@ -0,0 +1,22 @@
+/*
+Copyright 2021 Mechlovin' Studio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT_ID   0x6500
+#define DEVICE_VER   0x0001
+#define PRODUCTION   Haus Rev. 1

keyboards/mechlovin/hannah65/rev1/haus/readme.md

@@ -0,0 +1,23 @@
+# Haus
+
+![Haus](https://i.imgur.com/sQ2QWAZh.jpg)
+
+A Haus PCB, Rev.1
+
+* Keyboard Maintainer: [Hand Engineering](https://www.reddit.com/r/MechanicalKeyboards/comments/hzcavx/haus_by_hand_engineering/)
+* Hardware Supported: Haus PCB rev.1, STM32F303.
+* Hardware Availability: Haus Keyboard.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechlovin/hannah65/rev1/haus:default
+
+Flashing example for this keyboard:
+
+    make mechlovin/hannah65/rev1/haus:flash
+    
+
+
+**Reset Key:** To put the Haus PCB into bootloader, push reset swith on the bottom of the PCB.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mechlovin/hannah65/rev1/readme.md

@@ -0,0 +1,19 @@
+# hannah65 rev1
+
+![hannah65](https://i.imgur.com/qf0BYI2l.png)
+
+A 65% PCB, compatible with E6.5, Kyuu,...
+
+* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin)
+* Hardware Supported: Hannah65, STM32F303
+* Hardware Availability: [Mechlovin Store](https://mechlovin.studio)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechlovin/hannah65/rev1:default
+
+Flashing example for this keyboard:
+
+    make mechlovin/hannah65/rev1:flash
+    
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mechlovin/hannah65/rev1/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = mechlovin/hannah65/rev1/haus

keyboards/mechlovin/hannah65/rules.mk

@@ -22,4 +22,4 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
-DEFAULT_FOLDER = mechlovin/hannah65/rev1
+DEFAULT_FOLDER = mechlovin/hannah65/rev1/haus

keyboards/mechlovin/mechlovin9/config.h

@@ -0,0 +1,30 @@
+
+/*
+Copyright 2021 Mechlovin' Studio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4D4C
+#define MANUFACTURER Mechlovin Studio
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+#define BACKLIGHT_LEVELS 3

keyboards/mechlovin/mechlovin9/mechlovin9.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Mechlovin' Studio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "mechlovin9.h"

keyboards/mechlovin/mechlovin9/mechlovin9.h

@@ -1,4 +1,4 @@
-/* Copyright 2020 Team Mechlovin
+/* Copyright 2021 Mechlovin' Studio
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/mechlovin/mechlovin9/readme.md

@@ -10,6 +10,8 @@ A 65% PCB, compatible with Kyuu.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make mechlovin/hannah65/mechlovin9:default
+    make mechlovin/mechlovin9/rev1:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.

keyboards/mechlovin/mechlovin9/rev1/config.h

@@ -0,0 +1,42 @@
+/*
+Copyright 2021 Mechlovin' Studio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT_ID   0x6509
+#define DEVICE_VER   0x0001
+#define PRODUCT   Mechlovin9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { A4, A5, A3, A2, A1 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A0, C15, B4, B5, B3, C13, C14, A13 }
+
+#define LED_CAPS_LOCK_PIN B9
+
+#define BACKLIGHT_PIN B8
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 3

keyboards/mechlovin/mechlovin9/rev1/readme.md

@@ -0,0 +1,17 @@
+# mechlovin9
+
+![mechlovin9](https://i.imgur.com/T5Lm6OYl.png)
+
+A 65% PCB, compatible with Kyuu.
+
+* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin)
+* Hardware Supported: Kyuu Keyboard.
+* Hardware Availability: [Reddit GB](https://www.reddit.com/r/mechmarket/comments/i61par/gb_mechlovin_9_a_kyuu_65_keyboard_compatible_pcb/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechlovin/mechlovin9/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.

keyboards/mechlovin/mechlovin9/rev1/rules.mk

@@ -0,0 +1,10 @@
+# MCU name
+MCU = STM32F303
+BOARD = QMK_PROTON_C
+
+# Build Options
+#   change yes to no to disable
+#
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # USB Nkey Rollover

keyboards/mechlovin/mechlovin9/rev2/config.h

@@ -0,0 +1,44 @@
+/*
+Copyright 2020 Team Mechlovin'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT_ID    0x6509
+#define DEVICE_VER    0x0002
+#define PRODUCT       Mechlovin9 Rev2
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4 }
+#define MATRIX_COL_PINS { B2, B1, B0, B3, B4, B5, D0, D1, D5, D6, D7, C0, C3, C2, C1 }
+
+#define LED_CAPS_LOCK_PIN A7
+
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_BREATHING
+
+/* Bootmagic Lite key configuration */
+ #define BOOTMAGIC_LITE_ROW 0
+ #define BOOTMAGIC_LITE_COLUMN 13

keyboards/mechlovin/mechlovin9/rev2/readme.md

@@ -0,0 +1,17 @@
+# mechlovin9
+
+![mechlovin9](https://i.imgur.com/T5Lm6OYl.png)
+
+A 65% PCB, compatible with Kyuu.
+
+* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin)
+* Hardware Supported: Kyuu Keyboard.
+* Hardware Availability: [Reddit GB](https://www.reddit.com/r/mechmarket/comments/i61par/gb_mechlovin_9_a_kyuu_65_keyboard_compatible_pcb/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechlovin/mechlovin9/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.

keyboards/mechlovin/mechlovin9/rev2/rules.mk

@@ -0,0 +1,9 @@
+# MCU name
+MCU = atmega32a
+
+# Processor frequency
+F_CPU = 16000000
+
+# Bootloader selection
+BOOTLOADER = bootloadHID
+

keyboards/mechlovin/mechlovin9/rules.mk

@@ -0,0 +1,18 @@
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+DEFAULT_FOLDER = mechlovin/mechlovin9/rev1