diff --git a/keyboards/pos78/config.h b/keyboards/pos78/config.h new file mode 100644 index 0000000000..c307c6f5c6 --- /dev/null +++ b/keyboards/pos78/config.h @@ -0,0 +1,110 @@ +/* +Copyright 2020 smssmssms + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x7878 +#define DEVICE_VER 0x0001 +#define MANUFACTURER smssmssms +#define PRODUCT POS78 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 } +#define MATRIX_COL_PINS { C7, D6, B7 ,B6, B5, E6, C6, D0, D1, D3, D2, B1, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/pos78/info.json b/keyboards/pos78/info.json new file mode 100644 index 0000000000..cbe894fd9e --- /dev/null +++ b/keyboards/pos78/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "pos78", + "url": "https://github.com/smssmssms/pos78.git", + "maintainer": "smssmssms", + "width": 13, + "height": 6, + "layouts": { + "LAYOUT_ortho_6x13": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, + {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, + {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":8, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5} + ] + } + } +} diff --git a/keyboards/pos78/keymaps/default/keymap.c b/keyboards/pos78/keymaps/default/keymap.c new file mode 100644 index 0000000000..9d4b43001a --- /dev/null +++ b/keyboards/pos78/keymaps/default/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2020 smssmssms + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_uk.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_ortho_6x13( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_BSPC, KC_DEL, + UK_GRV, UK_1, UK_2, UK_3, UK_4, UK_5, UK_6, UK_7, UK_8, UK_9, UK_0, UK_MINS, UK_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, UK_LBRC, UK_RBRC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, UK_SCLN, UK_QUOT, UK_HASH, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, UK_COMM, UK_DOT, UK_SLSH, UK_BSLS, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC, TG(_FN), KC_MUTE, KC_ENT, KC_ALGR, KC_RGUI, KC_MENU, KC_HOME, KC_END + ), + + [_FN] = LAYOUT_ortho_6x13( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F11, KC_F12, + _______, XXXXXXX, KC_WAKE, KC_MYCM, XXXXXXX, XXXXXXX, KC_AGAIN, KC_VOLU, KC_INS, KC_PWR, KC_PSCR, XXXXXXX, KC_PGUP, + _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_FIND, XXXXXXX, KC_HELP, KC_VOLD, KC_CALC, KC_BRIU, XXXXXXX, KC_UP, KC_PGDN, + _______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, RESET, XXXXXXX, KC_MAIL, UK_COMM, KC_BRID, KC_LEFT, KC_DOWN, KC_RIGHT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/pos78/keymaps/default/readme.md b/keyboards/pos78/keymaps/default/readme.md new file mode 100644 index 0000000000..c313876fc9 --- /dev/null +++ b/keyboards/pos78/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default (UK) keymap for pos78 diff --git a/keyboards/pos78/pos78.c b/keyboards/pos78/pos78.c new file mode 100644 index 0000000000..f2e98aba0f --- /dev/null +++ b/keyboards/pos78/pos78.c @@ -0,0 +1,17 @@ +/* Copyright 2020 smssmssms + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "pos78.h" diff --git a/keyboards/pos78/pos78.h b/keyboards/pos78/pos78.h new file mode 100644 index 0000000000..2d5681addd --- /dev/null +++ b/keyboards/pos78/pos78.h @@ -0,0 +1,43 @@ +/* Copyright 2020 smssmssms + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_ortho_6x13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, \ + k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, \ + k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, k37, k38, \ + k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k50, k51, \ + k52, k53, k54, k55, k56, k57, k58, k59, k60, k61, k62, k63, k64, \ + k65, k66, k67, k68, k69, k70, k71, k72, k73, k74, k75, k76, k77 \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12}, \ + {k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25}, \ + {k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, k37, k38}, \ + {k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k50, k51}, \ + {k52, k53, k54, k55, k56, k57, k58, k59, k60, k61, k62, k63, k64}, \ + {k65, k66, k67, k68, k69, k70, k71, k72, k73, k74, k75, k76, k77} \ +} diff --git a/keyboards/pos78/readme.md b/keyboards/pos78/readme.md new file mode 100644 index 0000000000..3a85518a0c --- /dev/null +++ b/keyboards/pos78/readme.md @@ -0,0 +1,17 @@ +# pos78 + +![](https://i.imgur.com/ml5cPDS.png) + +* Keyboard Maintainer: [smssmssms](https://github.com/smssmssms) +* Hardware Supported: ATMEGA 32U4 (Adafruit Itsy Bitsy 5v) +* Hardware Availability: 1980-90's version of the [Partner Tech Corp KB-78](https://www.partner.com.tw/wp-content/uploads/2019/09/KB-78-G-78-1-190911.pdf); a 78 key Point-Of-Sale ortholinear keyboard conversion + +Make example for this keyboard (after setting up your build environment): + + make pos78:default + +Flashing example for this keyboard: + + make pos78:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pos78/rules.mk b/keyboards/pos78/rules.mk new file mode 100644 index 0000000000..5c0d8f307c --- /dev/null +++ b/keyboards/pos78/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output