1
0
Fork 0

Keymaps for several of my boards (#1641)

* copied mjt keymaps from archive

* All mjt boards now compile

* fixed jd45-mjt breathing

* Updates to fix SpaceFN but not tested yet.

* Still missing either spacebar or an adjacent keypress.

* Debugging rigged up for use with hid_listen.

* Reverted the default keymap to use tap_layer_key rather than custom.  Moved custom approach to keymap_debug.c

* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.

* Cleaned up JD45 keymap that uses tapkey.

* Redid minivan keymap with numsym rather than raise/lower.
Untested.

* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.

* Minor keymap fixes to make them compile without errors.

* Added home/end to right arrow cluster on DYN layer.

* Added more keys to fn and dyn layers.

* It wasn't using my custom layer last time somehow...?  Now it will.

* Compiled and installed at end of day on 8/23

* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.

* Fixed volume controls... were reversed and disabled.

* Added F13-F15 back to fkeys layer in Minivan

* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.

* Removed DYN layer.

* Fixed diagram in planck numsym.

* Cleanup for pull request.

* Roadkit flip phone warning.

* Replaced PLAY_NOTES_ARRAY to PLAY_SONG

* reset the submodules

* checked out specific commits for submodules

* Removed debugging from JD45 shared config.h

* Moved custom rules.mk to apropriate keymap

Reset the shared rules.mk file.

* Trailing return issue in rules.mk

Gotta make for a smooth pull request :-)
This commit is contained in:
Michael Terhar 2017-08-26 23:33:33 -04:00 committed by Jack Humbert
parent de315c54eb
commit 7960302242
40 changed files with 3417 additions and 0 deletions

View file

@ -0,0 +1,29 @@
## not sure where this stuff goes ##
MCU = atmega32u4
F_CPU = 16000000
ARCH = AVR8
F_USB = $(F_CPU)
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
TAP_DANCE_ENABLE=yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,171 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Some Guy
#define PRODUCT Gherkin
#define DESCRIPTION 30 percent disaster
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
// These are with USB on the left.
// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
// original from TMK: #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 }
// these are with USB on the right.
#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
#define CATERINA_BOOTLOADER
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_PIN B5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define AUDIO_VOICES
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,280 @@
#include "gherkin.h"
#include "action_layer.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
#include "eeconfig.h"
extern keymap_config_t keymap_config;
//Tap Dance Declarations
enum {
TD_Z_LCTL = 0,
TD_X_LGUI = 1,
TD_C_LALT = 2,
TD_A_TAB = 3,
TD_Q_ESC = 4,
// M(0)
};
//Friendly Layer Names
enum gherkin_layers {
_QWERTY,
_SONGS,
_NUMBERS,
_SYMBOLS,
_PLOVER,
_ADJUST
};
// custom keycodes
enum gherkin_keycodes {
QWERTY = SAFE_RANGE,
NUMBERS,
SYMBOLS,
SONGS,
PLOVER,
BACKLIT,
MACSLEEP,
EXT_PLV
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KEYMAP(
TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
TD(TD_A_TAB), LT(_SYMBOLS,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_ADJUST,KC_SPC),
TD(TD_Z_LCTL), TD(TD_X_LGUI), TD(TD_C_LALT), KC_V, KC_B, LT(_NUMBERS, KC_N), KC_M, KC_COMM, KC_DOT, SFT_T(KC_ENT))
,
[_NUMBERS] = KEYMAP(
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END ,
KC_F7, KC_F8, KC_F9, KC_F10, LT(_ADJUST,KC_F11), _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT)
,
[_SYMBOLS] = KEYMAP(
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
KC_GRV, _______, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, KC_MINS, KC_EQL , KC_SCLN, KC_QUOT,
KC_TILD, MO(_ADJUST), XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, KC_UNDS, KC_PLUS, S(KC_SCLN), S(KC_QUOT))
,
[_PLOVER] = KEYMAP(
KC_Q, KC_W, KC_E, KC_R, KC_1, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
EXT_PLV, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX)
,
[_ADJUST] = KEYMAP(
RESET, _______, _______, _______, _______, QWERTY, NUMBERS, SYMBOLS, PLOVER, SONGS,
MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, _______, _______, MACSLEEP, _______,
BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______)
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistant_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case NUMBERS:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_dvorak);
#endif
persistant_default_layer_set(1UL<<_NUMBERS);
}
return false;
break;
case SYMBOLS:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_colemak);
#endif
persistant_default_layer_set(1UL<<_SYMBOLS);
}
return false;
break;
case PLOVER:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
stop_all_notes();
PLAY_SONG(tone_plover);
#endif
layer_off(_NUMBERS);
layer_off(_SYMBOLS);
layer_off(_ADJUST);
layer_on(_PLOVER);
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
keymap_config.raw = eeconfig_read_keymap();
keymap_config.nkro = 1;
eeconfig_update_keymap(keymap_config.raw);
}
return false;
break;
case EXT_PLV:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_plover_gb);
#endif
layer_off(_PLOVER);
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
// ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}
/*
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
keyevent_t event = record->event;
switch (id) {
case 0: {
if (record->event.pressed) {
key_timer = timer_read(); // if the key is being pressed, we start the timer.
}
else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
return MACRO( D(LSFT), END );
}
else {
return MACRO( T(N), END );
}
}
break;
}
}
return MACRO_NONE;
}*/
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_SONG(tone_startup);
}
void shutdown_user()
{
PLAY_SONG(tone_goodbye);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_SONG(music_scale);
}
#endif
void matrix_scan_user(void) {
}
//Tap Dance Definitions
qk_tap_dance_action_t tap_dance_actions[] = {
//Tap once for Esc, twice for Caps Lock
[TD_Z_LCTL] = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL),
[TD_X_LGUI] = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI),
[TD_C_LALT] = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT),
[TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB),
[TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
};
// don't know what this is doing...
/*
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRD |= (1 << 5); PORTD &= ~(1 << 5);
} else {
DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRB |= (1 << 0); PORTB &= ~(1 << 0);
} else {
DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}
*/

View file

@ -0,0 +1,77 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCAFE
#define DEVICE_VER 0x0104
#define MANUFACTURER q.m.k
#define PRODUCT HHKB mod
#define DESCRIPTION q.m.k keyboard firmware for HHKB
/* key matrix size */
#ifdef HHKB_JP
# define MATRIX_ROWS 16
#else
# define MATRIX_ROWS 8
#endif
#define MATRIX_COLS 8
#define TAPPING_TERM 200
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
#define USB_MAX_POWER_CONSUMPTION 50
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,114 @@
/* -*- eval: (turn-on-orgtbl); -*-
* default HHKB Layout
*/
#include "hhkb.h"
#define BASE 0
#define HHKB 1
#define FUNK 2
#define DYN 3
#define CTL_ESC CTL_T(KC_ESC)
#define MACSLEEP LCTL(LSFT(KC_POWER))
enum hhkb_keycodes {
QWERTY = SAFE_RANGE,
DYNKEY,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* BASE Level: Default Layer
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
| Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | |
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
| Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | |
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | |
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|------+------+-----------------------+------+------|
| LAlt | LGUI | ******* Space ******* | RGUI | RAlt |
|------+------+-----------------------+------+------|
*/
[BASE] = KEYMAP( // default layer
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT), TT(FUNK), \
KC_LALT, KC_LGUI, /* */ KC_SPC, MO(DYN), KC_RALT),
/* Layer HHKB: HHKB mode (HHKB Fn)
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
| Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
| Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | |
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
| | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | |
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
| | | | | | | + | - | End | PgD | Dow | | | | |
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|------+------+----------------------+------+------+
| **** | **** | ******************** | **** | **** |
|------+------+----------------------+------+------+
[HHKB] = KEYMAP(
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
*/
[FUNK] = KEYMAP(
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
[DYN] = KEYMAP(
KC_TRNS, DYN_REC_START1, DYN_REC_START2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MACSLEEP, KC_HOME, KC_END , KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, DYN_REC_STOP, KC_TRNS, KC_TRNS)
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = (keycode == MO(DYN) ? DYN_REC_STOP : keycode);
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
return true;
}

View file

@ -0,0 +1,16 @@
# Mike's HHKB
- Surprisingly stock for the most part
- Dynamic macros
- ctrl key has tapkey for escape
- right shift has tapkey for enter
- Works with iPhone Camera Adapter
## Layers
Base for letters and mods.
Funk layer is my tweaked function layer
Dyn layer has dynamic macros. Record with 1 and 2, playback with \ and
upper-right-most key. Also turns the arrow clusters into nav keys.

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,85 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT JD45
#define DESCRIPTION q.m.k. keyboard firmware for JD45
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 13
/* Planck PCB default pin-out */
#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
#define UNUSED_PINS
#define BACKLIGHT_PIN B7
#define USB_MAX_POWER_CONSUMPTION 50
#define BACKLIGHT_BREATHING
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,80 @@
#include "jd45.h"
/* Mike's Layout for JD45 with backlight LEDs acting as layer indicator
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP(
TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, BSLS,
FN1, A, S, D, F, G, H, J, K, L, QUOT, ENT,
FN0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
NO, LCTL, LALT, LGUI, SPC, BSPC, APP, FN2, ESC, NO ),
[1] = KEYMAP(
GRV, TRNS, UP, TRNS, 7, 8, 9, 0, MINS, EQL, PSCR, LBRC, RBRC,
TRNS, LEFT, DOWN, RGHT, 4, 5, 6, INS, HOME, PGUP, SCLN, TRNS,
TRNS, TRNS, TRNS, TRNS, 1, 2, 3, DEL, END, PGDN, TRNS, TRNS,
TRNS, TRNS, TRNS, SPC, TRNS, DEL, TRNS, FN3, TRNS, TRNS ),
[2] = KEYMAP(
TRNS, TRNS, VOLU, TRNS, F7, F8, F9, F10, F11, F12, PSCR, FN3, FN4,
TRNS, MPRV, VOLD, MNXT, F4, F5, F6, J, K, L, SCLN, TRNS,
TRNS, TRNS, TRNS, TRNS, F1, F2, F3, MUTE, MPRV, MNXT, MSTP, TRNS,
TRNS, TRNS, TRNS, LGUI, TRNS, TRNS, TRNS, TRNS, PAUS, TRNS )
/* ,
[3] = KEYMAP(
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, BTLD, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS )*/
};
enum macro_id {
M_LAYER1,
M_LAYER2
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_MODS_TAP_TOGGLE(MOD_LSFT),
// [1] = ACTION_LAYER_TAP_TOGGLE(1),
[1] = ACTION_MACRO(M_LAYER1),
[2] = ACTION_LAYER_TAP_TOGGLE(2),
[3] = ACTION_BACKLIGHT_STEP(),
[4] = ACTION_BACKLIGHT_TOGGLE()
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case M_LAYER1:
// need to add a timer for doubletap: https://github.com/jackhumbert/qmk_firmware/wiki#timer-functionality
// action_function_tap may also handle this...
if (record->event.pressed)
{
breathing_speed_set(3);
breathing_enable();
layer_on(1);
}
else
{
breathing_speed_set(1);
breathing_self_disable();
layer_off(1);
}
break;
case M_LAYER2:
if (record->event.pressed)
{
breathing_speed_set(2);
breathing_pulse();
layer_on(2);
}
else
{
breathing_speed_set(1);
breathing_self_disable();
layer_off(2);
}
break;
}
return MACRO_NONE;
};

View file

@ -0,0 +1,12 @@
# Mike's JD45 standard layout
- Backlight that matches active layer
- Works with iPhone Camera Adapter
## Layers
Base for letters and mods.
Function 1 layer adds a centered numpad to the board
Function 2 layer replaces the numpad numbers with Fkeys.

View file

@ -0,0 +1,67 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
# UNICODE_ENABLE = YES # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

View file

@ -0,0 +1,23 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
DEBUG_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,84 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT JD45
#define DESCRIPTION q.m.k. keyboard firmware for JD45
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 13
/* Planck PCB default pin-out */
#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
#define UNUSED_PINS
#define BACKLIGHT_PIN B7
#define USB_MAX_POWER_CONSUMPTION 50
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,149 @@
#include "jd45.h"
enum jd45_layers
{
_QWERTY,
_QWERTYNUMMODS,
_NUMSYM,
_FUNCTION,
_NUMPAD,
_FKEYNUMPAD,
_ADJUST
};
enum jd45_keycodes
{
NUMSYM = SAFE_RANGE,
MACSLEEP,
USEFNMODS,
USENUMMODS,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
#define LONGPRESS_DELAY 150
#define LAYER_TOGGLE_DELAY 900
#define _______ KC_TRNS
#define __MOD__ KC_TRNS
#define XXXXXXX KC_NO
#define F_FNSPC F(0)
#define F_NUMSPC F(1)
#define F_FNTAB F(2)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = {
{F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC},
{CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
{ XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_FNSPC, XXXXXXX, XXXXXXX, MO(_FUNCTION), MO(_ADJUST) }
},
[_QWERTYNUMMODS] = {
{F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC},
{CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
{XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_NUMSPC, XXXXXXX, XXXXXXX, MO(_FKEYNUMPAD), MO(_ADJUST) }
},
[_NUMSYM] = {
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_DEL},
{__MOD__, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______},
{_______, _______, _______, _______, _______, KC_SPC, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______},
{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
},
[_FUNCTION] = {
{__MOD__, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
{__MOD__, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__ , __MOD__}
},
[_NUMPAD] = {
{KC_GRV, _______, KC_UP, _______, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PSCR, KC_LBRC, KC_RBRC},
{_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_4, KC_5, KC_6, KC_INS, KC_HOME, KC_PGUP, _______, _______},
{_______, _______, _______, _______, KC_1, KC_2, KC_3, KC_DEL, KC_END, KC_PGDN, _______, _______},
{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
},
[_FKEYNUMPAD] = {
{_______, _______, KC_VOLU, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, _______, _______},
{_______, KC_MPRV, KC_VOLD, KC_MNXT, KC_F4, KC_F5, KC_F6, KC_J, KC_K, KC_L, KC_SCLN, _______},
{_______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_MUTE, KC_MPRV, KC_MNXT, KC_MSTP, _______},
{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__ }
},
[_ADJUST] = {
{_______, RESET, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, KC_PSCR, _______, _______},
{ _______, _______, _______, _______, USEFNMODS, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, MACSLEEP, _______, _______},
{ _______, _______, _______, _______, _______, _______, USENUMMODS, _______, _______, _______, _______, _______},
{XXXXXXX, _______, _______,XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
}
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(_NUMSYM, KC_SPC),
[1] = ACTION_LAYER_TAP_KEY(_NUMPAD, KC_SPC),
[2] = ACTION_LAYER_TAP_KEY(_FUNCTION, KC_TAB),
};
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
static bool singular_key = false;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode);
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
println(" ");
print("process record");
switch (keycode) {
case MACSLEEP:
if (record->event.pressed) {
// ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
case USEFNMODS:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_fnpc, false, 0);
#endif
print("Space-FN");
}
return false;
break;
case USENUMMODS:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTYNUMMODS);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_fnmac, false, 0);
#endif
print("Space-Numpad");
}
return false;
break;
default:
singular_key = false;
break;
}
return true;
};
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
// debug_enable = true;
}

View file

@ -0,0 +1,23 @@
# Mike's JD45 with 6u Spacebar
- Early draft of numsym that misses a lot of symbols
- Numpad layer available for evaluation
- Works with iPhone Camera Adapter
- Dynamic macros
## Layers
Qwerty for letters and mods.
Qwertymods layer switches some Modifiers around
Numsym puts the number keys across the top row like a Planck. Arrows are on hjkl
which makes the other NumSym dynamic from my other boards fall apart
Function layer replaces the top row numbers with Fkeys.
Numpad layer makes a number pad in the center.
Fkeynumpad replaces the numpad numbers with Fkeys.
Adjust layer has macros and configuration.

View file

@ -0,0 +1,25 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,38 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define USE_SERIAL
#define MASTER_LEFT
// #define _MASTER_RIGHT
// #define EE_HANDS
#ifdef SUBPROJECT_rev1
#include "../../rev1/config.h"
#endif
#ifdef SUBPROJECT_rev2
#include "../../rev2/config.h"
#endif
#ifdef SUBPROJECT_rev2fliphalf
#include "../../rev2fliphalf/config.h"
#endif
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 10

View file

@ -0,0 +1,217 @@
#include "lets_split.h"
#include "action_layer.h"
#include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = KEYMAP( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = KEYMAP( \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_DVORAK] = KEYMAP( \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = KEYMAP( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = KEYMAP( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = KEYMAP( \
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_colemak, false, 0);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,74 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEEB
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER MJT
#define PRODUCT Mitosis
#define DESCRIPTION q.m.k. keyboard firmware for Mitosis
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 10
// fix iPhone power adapter issue
#define USB_MAX_POWER_CONSUMPTION 50
// #define CATERINA_BOOTLOADER
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
#define PREVENT_STUCK_MODIFIERS
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
#define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX and RX */ \
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
} while(0)
#endif

View file

@ -0,0 +1,329 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include "mitosis.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
#include "eeconfig.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum mitosis_layers
{
_QWERTY,
_SHIFTED,
_FUNCTIONPC,
_FUNCTIONMAC,
_FUNCSHIFT,
_ADJUST
};
enum mitosis_keycodes
{
FNKEY = SAFE_RANGE,
SHIFT,
MACSLEEP,
FNMAC,
FNPC,
DYNAMIC_MACRO_RANGE,
};
// Macro definitions for readability
enum mitosis_macros
{
VOLU,
VOLD,
ESCM
};
#include "dynamic_macro.h"
#define LONGPRESS_DELAY 150
#define LAYER_TOGGLE_DELAY 900
// Fillers to make layering more clear
#define _______ KC_TRNS
#define __MOD__ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* QWERTY adapted to this crazy thing */
{KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P },
{KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN },
{SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) },
{XXXXXXX, KC_LCTL, M(ESCM), KC_TAB, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, XXXXXXX },
{XXXXXXX, KC_LALT, KC_LGUI, KC_SPC, SHIFT, FNKEY, KC_BSPC, KC_ENT, MO(_ADJUST), XXXXXXX }
},
[_SHIFTED] = { /* Shifted Layer, layered so that tri_layer can be used, or selectively
able to modify individual key's shifted behaviour */
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
{XXXXXXX, __MOD__, KC_DEL, _______, _______, _______, _______, _______, _______, XXXXXXX },
{XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, KC_NO, XXXXXXX }
},
[_FUNCTIONPC] = { /* Function Layer mimicks planck's raise layer somewhat */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 },
{LCTL(KC_A), LCTL(KC_S), _______, LCTL(KC_F),_______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC },
{LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V),_______, _______, KC_BSLS, _______, _______, KC_QUOT },
{XXXXXXX, __MOD__, KC_DEL, _______, KC_GRV, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX },
{XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, KC_PSCR, KC_NO, XXXXXXX }
},
[_FUNCTIONMAC] = { /* Function Layer mimicks planck's raise layer somewhat */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 },
{LGUI(KC_A), LGUI(KC_S), _______, LGUI(KC_F),_______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC },
{LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V),_______, _______, KC_BSLS, _______, _______, KC_QUOT },
{XXXXXXX, __MOD__, KC_DEL, _______, KC_GRV, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX },
{XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, KC_PSCR, KC_NO, XXXXXXX }
},
[_FUNCSHIFT] = { /* Function Shifted Layer mimicks planck's lower layer somewhat */
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_LCBR, KC_RCBR },
{KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______ },
{XXXXXXX, __MOD__, KC_DEL, _______, KC_TILD, _______, _______, _______, _______, XXXXXXX },
{XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, _______, XXXXXXX }
},
[_ADJUST] = { /* Adjust layer for fancy stuff and macros */
{RESET, FNPC, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, _______ },
{FNMAC, _______, AU_ON, AU_OFF, _______, _______, _______, _______, MACSLEEP, _______ },
{MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY },
{XXXXXXX, __MOD__, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, XXXXXXX },
{XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, __MOD__, XXXXXXX }
}
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND);
float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND);
float tone_fnpc[][2] = SONG(PLOVER_SOUND);
float tone_fnmac[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
const uint16_t PROGMEM fn_actions[] = {
};
static uint16_t function_layer = _FUNCTIONMAC;
static uint16_t key_timer;
void persistent_function_layer_set(uint16_t new_function_layer) {
// eeconfig_update_function_layer(new_function_layer);
function_layer = new_function_layer;
// should clear layers to avoid getting stuck.
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
//switch multiplexing for media, short tap for volume up, long press for play/pause
case VOLU:
if (record->event.pressed) {
key_timer = timer_read(); // if the key is being pressed, we start the timer.
} else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
if (timer_elapsed(key_timer) > LONGPRESS_DELAY) { // LONGPRESS_DELAY being 150ms, the threshhold we pick for counting something as a tap.
return MACRO(T(MPLY), END);
} else {
return MACRO(T(VOLU), END);
}
}
break;
//switch multiplexing for media, short tap for volume down, long press for next track
case VOLD:
if (record->event.pressed) {
key_timer = timer_read();
} else {
if (timer_elapsed(key_timer) > LONGPRESS_DELAY) {
return MACRO(T(MNXT), END);
} else {
return MACRO(T(VOLD), END);
}
}
break;
//switch multiplexing for escape, short tap for escape, long press for context menu
case ESCM:
if (record->event.pressed) {
key_timer = timer_read();
} else {
if (timer_elapsed(key_timer) > LONGPRESS_DELAY) {
return MACRO(T(APP), END);
} else {
return MACRO(T(ESC), END);
}
}
break;
}
return MACRO_NONE;
};
static bool singular_key = false;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode);
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
uint8_t layer;
layer = biton32(layer_state); // get the current layer
//custom layer handling for tri_layer,
switch (keycode) {
case MACSLEEP:
if (record->event.pressed) {
// ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
case FNKEY:
if (record->event.pressed) {
key_timer = timer_read();
singular_key = true;
// layer_on(_FUNCTION);
layer_on(function_layer);
} else {
if (timer_elapsed(key_timer) < LAYER_TOGGLE_DELAY || !singular_key) {
layer_off(function_layer);
}
}
update_tri_layer(function_layer, _SHIFTED, _FUNCSHIFT);
return false;
break;
//SHIFT is handled as LSHIFT in the general case
case SHIFT:
if (record->event.pressed) {
key_timer = timer_read();
singular_key = true;
layer_on(_SHIFTED);
register_code(KC_LSFT);
} else {
if (timer_elapsed(key_timer) < LAYER_TOGGLE_DELAY || !singular_key) {
layer_off(_SHIFTED);
unregister_code(KC_LSFT);
}
}
update_tri_layer(function_layer, _SHIFTED, _FUNCSHIFT);
return false;
break;
case FNPC:
if (record->event.pressed) {
persistent_function_layer_set(_FUNCTIONPC);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_fnpc, false, 0);
#endif
}
return false;
break;
case FNMAC:
if (record->event.pressed) {
persistent_function_layer_set(_FUNCTIONMAC);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_fnmac, false, 0);
#endif
}
return false;
break;
//If any other key was pressed during the layer mod hold period,
//then the layer mod was used momentarily, and should block latching
default:
singular_key = false;
break;
}
//FUNCSHIFT has been shifted by the SHIFT handling, some keys need to be excluded
if (layer == _FUNCSHIFT) {
//F1-F12 should be sent as unshifted keycodes,
//and ] needs to be unshifted or it is sent as }
if ( (keycode >= KC_F1 && keycode <= KC_F12)
|| keycode == KC_RBRC ) {
if (record->event.pressed) {
unregister_mods(MOD_LSFT);
} else {
register_mods(MOD_LSFT);
}
}
}
return true;
};
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
void shutdown_user()
{
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_NOTE_ARRAY(music_scale, false, 0);
}
#endif
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_off;
break;
case _FUNCTIONMAC:
set_led_blue;
break;
case _FUNCTIONPC:
set_led_cyan;
break;
case _SHIFTED:
set_led_red;
break;
case _FUNCSHIFT:
set_led_green;
break;
case _ADJUST:
set_led_white;
break;
default:
break;
}
};

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,33 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
// #define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 2
// fix iPhone power adapter issue
#define USB_MAX_POWER_CONSUMPTION 50
#endif

View file

@ -0,0 +1,283 @@
// This is MJT's bastardization of the planck and minivan defaults
#include "planck.h"
#include "action_layer.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum planck_layers {
_QWERTY,
_LOWER,
_RAISE,
_PLOVER,
_ADJUST,
_DYN
};
enum planck_keycodes {
QWERTY = SAFE_RANGE,
PLOVER,
LOWER,
RAISE,
BACKLIT,
EXT_PLV,
MACSLEEP,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) },
{MO(_DYN), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = {
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______},
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Dn |Pg Up | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Home |Pg Dn |Pg Up | End |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = {
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______},
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGDN, KC_PGUP, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
},
/* Plover layer (http://opensteno.org)
* ,-----------------------------------------------------------------------------------.
* | # | # | # | # | # | # | # | # | # | # | # | # |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | S | T | P | H | * | * | F | P | L | T | D |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | S | K | W | R | * | * | R | B | G | S | Z |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Exit | | | A | O | | E | U | | | |
* `-----------------------------------------------------------------------------------'
*/
[_PLOVER] = {
{KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 },
{XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC},
{XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX}
},
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | |Pause |PR SC | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| |Sleep |Plover| |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |TogLED| | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = {
{_______ , RESET, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PSCR, KC_DEL },
{_______ , _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______},
{_______ , MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
{BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
[_DYN] = {
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______ },
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______}
}
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND);
float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistant_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
case PLOVER:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
stop_all_notes();
PLAY_SONG(tone_plover);
#endif
layer_off(_RAISE);
layer_off(_LOWER);
layer_off(_ADJUST);
layer_on(_PLOVER);
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
keymap_config.raw = eeconfig_read_keymap();
keymap_config.nkro = 1;
eeconfig_update_keymap(keymap_config.raw);
}
return false;
break;
case EXT_PLV:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_plover_gb);
#endif
layer_off(_PLOVER);
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
// ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_SONG(tone_startup);
}
void shutdown_user()
{
PLAY_SONG(tone_goodbye);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_SONG(music_scale);
}
#endif

View file

@ -0,0 +1,22 @@
# Mike's Plancklike Planck
- Music/Audio
- Dynamic Macros
- Media Keys
- Works with iPhone Camera Adapter
## Layers
Qwerty for letters and mods.
Raise and Lower are mostly default with a few tweaks.
Adjust layer is tough to get to so it is only for keyboard configuration stuff.
## Dynamic Macros
Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2.
When you are done recording, press TAB again.
For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2.

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,33 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
// #define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 2
// fix iPhone power adapter issue
#define USB_MAX_POWER_CONSUMPTION 50
#endif

View file

@ -0,0 +1,282 @@
// This is MJT's bastardization of the planck and minivan defaults
#include "planck.h"
#include "action_layer.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum planck_layers {
_QWERTY,
_FKEYS,
_NUMSYM,
_PLOVER,
_ADJUST
};
enum planck_keycodes {
QWERTY = SAFE_RANGE,
PLOVER,
FKEYS,
NUMSYM,
BACKLIT,
EXT_PLV,
MACSLEEP,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Brite| Ctrl | Alt | GUI |FKEYS | Space |NUMSYM | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) },
{KC_LCTL, KC_LCTL, KC_LALT, KC_LGUI, FKEYS, KC_SPC, KC_SPC, NUMSYM, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
/* FKEYS
* ,-----------------------------------------------------------------------------------.
* | ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F11 | F12 | F13 | F14 | F15 | | |Sleep | | Rec1 | Rec2 |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | Mac1 | Mac2 | | Stop |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_FKEYS] = {
{KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______},
{KC_DEL, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F6, _______, _______, MACSLEEP, DYN_REC_START1, DYN_REC_START2},
{_______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, DYN_REC_STOP},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
/* NUMSYM
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | ' |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | _ | + | { | } | | | - | = | [ | ] | \ | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Home |Pg Dn |Pg Up | End |
* `-----------------------------------------------------------------------------------'
*/
[_NUMSYM] = {
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______},
{KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______},
{_______,KC_UNDS, KC_PLUS,KC_LCBR, KC_RCBR, KC_PIPE, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
},
/* Plover layer (http://opensteno.org)
* ,-----------------------------------------------------------------------------------.
* | # | # | # | # | # | # | # | # | # | # | # | # |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | S | T | P | H | * | * | F | P | L | T | D |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | S | K | W | R | * | * | R | B | G | S | Z |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Exit | | | A | O | | E | U | | | |
* `-----------------------------------------------------------------------------------'
*/
[_PLOVER] = {
{KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 },
{XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC},
{XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX}
},
/* Adjust (FKEYS + NUMSYM)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | |Pause |PR SC | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| |Sleep |Plover| |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |TogLED| | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = {
{_______ , RESET, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PSCR, KC_DEL },
{_______ , _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______},
{_______ , MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
{BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
} /*,
[_DYN] = {
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______ },
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______}
}*/
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND);
float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = (keycode == FKEYS ? DYN_REC_STOP : keycode);
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistant_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case FKEYS:
if (record->event.pressed) {
layer_on(_FKEYS);
update_tri_layer(_FKEYS, _NUMSYM, _ADJUST);
} else {
layer_off(_FKEYS);
update_tri_layer(_FKEYS, _NUMSYM, _ADJUST);
}
return false;
break;
case NUMSYM:
if (record->event.pressed) {
layer_on(_NUMSYM);
update_tri_layer(_FKEYS, _NUMSYM, _ADJUST);
} else {
layer_off(_NUMSYM);
update_tri_layer(_FKEYS, _NUMSYM, _ADJUST);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
case PLOVER:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
stop_all_notes();
PLAY_SONG(tone_plover);
#endif
layer_off(_NUMSYM);
layer_off(_FKEYS);
layer_off(_ADJUST);
layer_on(_PLOVER);
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
keymap_config.raw = eeconfig_read_keymap();
keymap_config.nkro = 1;
eeconfig_update_keymap(keymap_config.raw);
}
return false;
break;
case EXT_PLV:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_plover_gb);
#endif
layer_off(_PLOVER);
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
// ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_SONG(tone_startup);
}
void shutdown_user()
{
PLAY_SONG(tone_goodbye);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_SONG(music_scale);
}
#endif

View file

@ -0,0 +1,26 @@
# Mike's Rethought Planck
- Music/Audio
- Dynamic Macros
- Media Keys
- Works with iPhone Camera Adapter
## Layers
Qwerty for letters and mods.
Numsym for all numbers and symbols used in typing. Follows a similar approach to
planck but puts both on the same layer eschewing the F-keys.
Fkeys layer is for the seldom used stuff like F-keys and some additional features
such as dynamic macros, media keys, and a sleep shortcut for OS X.
Adjust layer is mainly for keyboard configuration stuff.
## Dynamic Macros
Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2.
When you are done recording, press TAB again.
For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2.

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,216 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
void backlight_toggle(void){
};
enum roadkit_layers {
_NUMPAD,
_FPH,
_FPHNOISY,
_ADJUST,
_DYN
};
enum roadkit_keycodes {
NUMPAD = SAFE_RANGE,
FPH_1,
FPH_2,
FPH_3,
FPH_4,
FPH_5,
FPH_6,
FPH_7,
FPH_8,
FPH_9,
FN_0,
BACKLIT,
MACSLEEP,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
// Fillers to make keymaps cleaner looking
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NUMPAD] = /* Numpad */
KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
LT(_ADJUST, KC_KP_0), KC_KP_DOT),
[_FPH] = /* Quiet T9 */
KEYMAP(FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \
FPH_4, FPH_5, FPH_6, \
FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \
LT(_ADJUST, KC_SPACE), KC_KP_DOT),
[_FPHNOISY] = /* Noisy T9 */
KEYMAP(FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \
FPH_4, FPH_5, FPH_6, \
FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \
LT(_ADJUST, KC_SPACE), KC_KP_DOT),
[_ADJUST] = /* Adjustments */
KEYMAP(KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \
KC_BSPC, BACKLIT, KC_DEL, \
MACSLEEP, _______, _______, _______, \
_______, MO(_DYN)),
[_DYN] = /* DYNAMIC MACRO */
KEYMAP(DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \
_______, _______, _______, \
DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \
_______, _______),
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
uint16_t fph_tap_qty = false;
uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower...
uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods"
tap_qty--; // reduce by one to match array indexes.
switch(keycode){
case FPH_2:
{uint16_t kc[] = {KC_A, KC_B, KC_C};
if(tap_qty % 6 > 2)
return LSFT(kc[tap_qty % 3]);
return kc[tap_qty % 3];}
break;
case FPH_3:
{uint16_t kc[] = {KC_D, KC_E, KC_F};
if(tap_qty % 6 > 2)
return LSFT(kc[tap_qty % 3]);
return kc[tap_qty % 3];}
break;
case FPH_4:
{uint16_t kc[] = {KC_G, KC_H, KC_I};
if(tap_qty % 6 > 2)
return LSFT(kc[tap_qty % 3]);
return kc[tap_qty % 3];}
break;
case FPH_5:
{uint16_t kc[] = {KC_J, KC_K, KC_L};
if(tap_qty % 6 > 2)
return LSFT(kc[tap_qty % 3]);
return kc[tap_qty % 3];}
break;
case FPH_6:
{uint16_t kc[] = {KC_M, KC_N, KC_O};
if(tap_qty % 6 > 2)
return LSFT(kc[tap_qty % 3]);
return kc[tap_qty % 3];}
break;
case FPH_7:
{uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S};
if(tap_qty % 8 > 2)
return LSFT(kc[tap_qty % 4]);
return kc[tap_qty % 4];}
break;
case FPH_8:
{uint16_t kc[] = {KC_T, KC_U, KC_V};
if(tap_qty % 8 > 2)
return LSFT(kc[tap_qty % 4]);
return kc[tap_qty % 4];}
break;
case FPH_9:
{uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z};
if(tap_qty % 8 > 2)
return LSFT(kc[tap_qty % 4]);
return kc[tap_qty % 4];}
break;
case FPH_1:
{uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \
KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \
KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \
KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)};
return kc[tap_qty % 26];}
}
return KC_NO;
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (!process_record_dynamic_macro(keycode, record)) {
return false;
}
uint8_t layer;
layer = biton32(layer_state);
switch (keycode) {
case FPH_1 ... FPH_9:
if(layer == _FPHNOISY){
if (record->event.pressed) {
if(fph_keycode != keycode) { // key change
fph_tap_qty = 0;
fph_keycode = keycode;
} else { // same key tapped again so erase and increment.
register_code(KC_BSPC);
unregister_code(KC_BSPC);
fph_tap_qty++;
}
uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty);
// find mods? Apply mods..
register_code(render_keycode);
unregister_code(render_keycode);
} else {
// do we need to do anything on key-release?
}
} else { // not noisy, be demure .
if (record->event.pressed) {
if(fph_keycode != keycode) { // key change, kill everything.
uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty);
// find mods? Apply mods..
register_code(render_keycode);
unregister_code(render_keycode);
fph_keycode = keycode;
fph_tap_qty = 0;
} else { // same key tapped again so increment counter silently
fph_tap_qty++;
}
} else {
// do we need to do anything on key-release?
// maybe start a timer on this one?
}
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,26 @@
# Flip Phone layout for Roadkit
BEWARE, THIS DOES NOT WORK YET.
Uses the numpad with classic cellular phone style letters assigned to the numbers.
# LAYERS
* Numpad - The layer that matches the caps mostly
* FPH - Base layer for text
* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced
* DYN - dynamic macro layer for recording and playing macros
## FPH
Poke the "2" key twice and it makes "B".
## FPHNOISY
Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through.
## MACROS
May be able to record macros with the T9 layer because the "KC_*"s are only sent
at the end. Trying to do a macro with T9NOISY would probably fill up the buffer
in just a few characters.

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,236 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
void backlight_toggle(void){
};
enum roadkit_layers {
_NUMPAD,
_NAVIGATION,
_EXCEL,
_ADJUST,
_DYN
};
enum minivan_keycodes {
NUMPAD = SAFE_RANGE,
NAVIGATION,
EXCEL,
NUMPAD_LOCK,
NAVIGATION_LOCK,
EXCEL_LOCK,
PARENS,
BRACKETS,
BRACES,
BACKLIT,
MACSLEEP,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
// Fillers to make keymaps cleaner looking
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NUMPAD] = /* Numpad */
KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, \
KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \
EXCEL, KC_KP_DOT),
[_EXCEL] = /* Excel related */
KEYMAP(KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \
KC_QUOT, KC_KP_EQUAL, PARENS , \
KC_DQT, BRACKETS, BRACES, _______, \
_______, MO(_DYN)),
[_NAVIGATION] = /* Navigation */
KEYMAP(KC_HOME, _______, KC_PGUP, KC_TAB, \
KC_END, KC_UP, KC_PGDN, \
KC_LEFT, KC_DOWN, KC_RIGHT, _______, \
_______, MO(_DYN)),
[_ADJUST] = /* Adjustments */
KEYMAP(KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \
KC_BSPC, _______, KC_DEL, \
EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \
_______, _______),
[_DYN] = /* DYNAMIC MACRO */
KEYMAP(DYN_REC_START1, DYN_REC_START2, _______, _______, \
_______, _______, _______, \
DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \
_______, _______),
};
const uint16_t PROGMEM fn_actions[] = {
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_numpad[][2] = SONG(QWERTY_SOUND);
float tone_excel[][2] = SONG(DVORAK_SOUND);
float tone_navigation[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool fn_tap_used = false; // sets to false when space is pressed,
// sets to true when any other key is pressed,
//when space is lifted, if another key was prssed, don't send space.
uint16_t fn_keycode = 0; // stores which spacebar was used, either raise or lower...
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (!process_record_dynamic_macro(keycode, record)) {
return false;
}
switch (keycode) {
case NAVIGATION: // This key is enter if tapped, navigation if held
if (record->event.pressed) {
fn_keycode = NAVIGATION; // these two lines figure out if the next action is
fn_tap_used = false;
layer_on(_NAVIGATION);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
} else {
layer_off(_NAVIGATION);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
if(!fn_tap_used && fn_keycode == NAVIGATION ){
register_code(KC_KP_ENTER);
unregister_code(KC_KP_ENTER);
fn_keycode = 0;
fn_tap_used = false;
}
}
return false;
break;
case EXCEL:
if (record->event.pressed) {
fn_keycode = EXCEL;
fn_tap_used = false;
layer_on(_EXCEL);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
} else {
layer_off(_EXCEL);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
if(!fn_tap_used && fn_keycode == EXCEL ){
register_code(KC_KP_0);
unregister_code(KC_KP_0);
fn_keycode = 0;
fn_tap_used = false;
}
}
return false;
break;
default:
fn_tap_used = true;
break; // don't return because this just handles the spacebars.
}
// this is the normal keycode processing switch from Planck default layout.
switch (keycode) {
case NUMPAD_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_numpad, false, 0);
#endif
persistant_default_layer_set(1UL<<_NUMPAD);
}
return false;
break;
case NAVIGATION_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_navigation, false, 0);
#endif
persistant_default_layer_set(1UL<<_NAVIGATION);
}
return false;
break;
case EXCEL_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_excel, false, 0);
#endif
persistant_default_layer_set(1UL<<_EXCEL);
}
return false;
break;
case PARENS:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_9);
unregister_code(KC_9);
register_code(KC_0);
unregister_code(KC_0);
register_code(KC_RSFT);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BRACKETS:
if (record->event.pressed) {
register_code(KC_LBRC);
unregister_code(KC_LBRC);
register_code(KC_RBRC);
unregister_code(KC_RBRC);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BRACES:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_LBRC);
unregister_code(KC_LBRC);
register_code(KC_RBRC);
unregister_code(KC_RBRC);
unregister_code(KC_RSFT);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,22 @@
# Mike's custom keymap for roadkit
Based on the 13 key layout.
## LAYERS
* Numpad - The layer that matches the caps
* Excel - / * - = and () [] {} macros
* Navigation - arrow keys and home/end
* ADJUST - just like planck adjust, lets you set default layer.
* DYN - dynamic macro layer for recording and playing macros
## MACROS
Sadly, the dynamic macros are probably going worthless because they keys that
they record have to be pressed on this keyboard. This keyboard doesn't have
most letters...
## LEADER KEYS
This board would probably be better with the user of leader keys instead of
complex layers with a raise/lower setup... Something to look into for later.

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,14 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#ifdef BACKLIGHT_ENABLE
#define BACKLIGHT_PIN B2
#define BACKLIGHT_LEVELS 7
#endif
#define USB_MAX_POWER_CONSUMPTION 50
#endif

View file

@ -0,0 +1,199 @@
//Author: mike terhar
#include "tv44.h"
#include "action_layer.h"
#include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
enum minivan_layers {
_QWERTY,
_NUMSYM,
_FKEYS,
_FKEYGRV,
_PLOVER,
_ADJUST
};
enum planck_keycodes {
QWERTY = SAFE_RANGE,
DYNKEY,
DYNAMIC_MACRO_RANGE,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define FKEYS F(_FKEYS)
#define NUMSYM F(_NUMSYM)
#define FKEYGRV F(_FKEYGRV)
#define MACSLEEP M(5)
#define PLOVER M(6)
#define LAYERRESET M(7)
#define BACKLIT M(8)
#define ADJUST M(9)
#define XXXXXXX KC_NO
#include "dynamic_macro.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = {
{FKEYS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT},
{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,SFT_T(KC_ENT) },
{KC_LCTL,KC_LALT,KC_LGUI, KC_SPC,XXXXXXX,XXXXXXX,XXXXXXX,NUMSYM,KC_LEFT,KC_DOWN,KC_UP ,KC_RIGHT}
},
[_NUMSYM] = {
{FKEYGRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______},
{KC_DEL,KC_EXLM, KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN, ADJUST },
{ _______, KC_UNDS,KC_PLUS, KC_LCBR,KC_RCBR,KC_PIPE , KC_MINS,KC_EQL,KC_LBRC, KC_RBRC, KC_BSLS, _______},
{_______,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,_______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
},
[_FKEYS] ={
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______},
{KC_DEL, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, _______, _______, _______, MACSLEEP, DYN_REC_START1, DYN_REC_START2 },
{KC_CAPS, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2,_______,DYN_REC_STOP},
{_______,_______,_______,LAYERRESET,XXXXXXX,XXXXXXX,XXXXXXX,LAYERRESET, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_PLOVER] = {
{KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 },
{XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC},
{XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{LAYERRESET, XXXXXXX, KC_C, KC_V, XXXXXXX , XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX}
},
[_ADJUST] = {
{_______ , RESET, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PAUS, KC_PSCR, KC_DEL },
{_______ , _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______},
{_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
{BACKLIT, _______, _______, LAYERRESET, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______}
}
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND);
float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_adjust[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const uint16_t PROGMEM fn_actions[] = {
[_FKEYS] = ACTION_LAYER_TAP_KEY(_FKEYS, KC_TAB),
[_FKEYGRV] = ACTION_LAYER_TAP_KEY(_FKEYS, KC_GRV),
[_NUMSYM] = ACTION_LAYER_TAP_TOGGLE(_NUMSYM),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case 5: // MACSLEEP
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
break;
case 6: // PLOVER
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
stop_all_notes();
PLAY_NOTE_ARRAY(tone_plover, false, 0);
#endif
layer_off(_NUMSYM);
layer_off(_FKEYS);
layer_off(_ADJUST);
layer_on(_PLOVER);
}
break;
case 7: // LAYERRESET
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
layer_off(_NUMSYM);
layer_off(_FKEYS);
layer_off(_PLOVER);
layer_off(_ADJUST);
}
break;
case 8: // BACKLIT
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
case 9: // ADJUST
if(record->event.pressed) {
#ifdef AUDIO_ENABLE
stop_all_notes();
PLAY_NOTE_ARRAY(tone_adjust, false, 0);
#endif
layer_off(_NUMSYM);
layer_off(_FKEYS);
layer_off(_PLOVER);
layer_on(_ADJUST);
}
}
return MACRO_NONE;
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
uint16_t macro_kc = keycode;
if (keycode == FKEYS || keycode == ADJUST || keycode == FKEYGRV ){
macro_kc = DYN_REC_STOP;
}
if (!process_record_dynamic_macro(macro_kc, record)) {
return false;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
void shutdown_user()
{
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_NOTE_ARRAY(music_scale, false, 0);
}
#endif

View file

@ -0,0 +1,26 @@
# Mike's Minivan
- Arrow Layout (45key)
- Dynamic Macros
- Media Keys
- Works with iPhone Camera Adapter
## Layers
Qwerty for letters and mods.
Numsym for all numbers and symbols used in typing. Follows a similar approach to
planck but puts both on the same layer eschewing the F-keys.
Fkeys layer is for the seldom used stuff like F-keys and some additional features
such as dynamic macros, media keys, and a sleep shortcut for OS X.
Adjust layer is tough to get to so it is only for keyboard configuration stuff.
## Dynamic Macros
Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2.
When you are done recording, press TAB again.
For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2.