[Keyboard] Add stickey4 keyboard (#15396)

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/dailycraft/stickey4/config.h

@@ -0,0 +1,156 @@
+/*
+Copyright 2021 yfuku
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5946 // YF
+#define PRODUCT_ID 0x0010
+#define DEVICE_VER 0x0001
+#define MANUFACTURER yfuku
+#define PRODUCT      stickey4
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define DIRECT_PINS { \
+    { D4, C6, D7, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \
+}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
+
+#define ENCODERS_PAD_A { D4, D7 }
+#define ENCODERS_PAD_B { C6, E6 }

keyboards/dailycraft/stickey4/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2021 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B,    KC_C,   KC_D,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO // for encoders
+    ),
+    [_FN1] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    ),
+    [_FN2] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    ),
+    [_FN3] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    )
+};

keyboards/dailycraft/stickey4/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for stickey4

keyboards/dailycraft/stickey4/keymaps/via/keymap.c

@@ -0,0 +1,115 @@
+/* Copyright 2021 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B,    KC_C,   KC_D,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO // for encoders
+    ),
+    [_FN1] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    ),
+    [_FN2] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    ),
+    [_FN3] = LAYOUT(
+        KC_NO,   KC_NO,   KC_NO,  KC_NO,
+        KC_NO,   KC_NO,   KC_NO,  KC_NO
+    )
+};
+
+keyevent_t encoder1_ccw = {
+    .key = (keypos_t){.row = 0, .col = 4},
+    .pressed = false
+};
+
+keyevent_t encoder1_cw = {
+    .key = (keypos_t){.row = 0, .col = 5},
+    .pressed = false
+};
+
+keyevent_t encoder2_ccw = {
+    .key = (keypos_t){.row = 0, .col = 6},
+    .pressed = false
+};
+
+keyevent_t encoder2_cw = {
+    .key = (keypos_t){.row = 0, .col = 7},
+    .pressed = false
+};
+
+void matrix_scan_user(void) {
+    if (IS_PRESSED(encoder1_ccw)) {
+        encoder1_ccw.pressed = false;
+        encoder1_ccw.time = (timer_read() | 1);
+        action_exec(encoder1_ccw);
+    }
+
+    if (IS_PRESSED(encoder1_cw)) {
+        encoder1_cw.pressed = false;
+        encoder1_cw.time = (timer_read() | 1);
+        action_exec(encoder1_cw);
+    }
+
+    if (IS_PRESSED(encoder2_ccw)) {
+        encoder2_ccw.pressed = false;
+        encoder2_ccw.time = (timer_read() | 1);
+        action_exec(encoder2_ccw);
+    }
+
+    if (IS_PRESSED(encoder2_cw)) {
+        encoder2_cw.pressed = false;
+        encoder2_cw.time = (timer_read() | 1);
+        action_exec(encoder2_cw);
+    }
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            encoder1_cw.pressed = true;
+            encoder1_cw.time = (timer_read() | 1);
+            action_exec(encoder1_cw);
+        } else {
+            encoder1_ccw.pressed = true;
+            encoder1_ccw.time = (timer_read() | 1);
+            action_exec(encoder1_ccw);
+        }
+    } else if (index == 1) {
+        if (clockwise) {
+            encoder2_cw.pressed = true;
+            encoder2_cw.time = (timer_read() | 1);
+            action_exec(encoder2_cw);
+        } else {
+            encoder2_ccw.pressed = true;
+            encoder2_ccw.time = (timer_read() | 1);
+            action_exec(encoder2_ccw);
+        }
+    }
+
+    return true;
+}

keyboards/dailycraft/stickey4/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The via keymap for stickey4

keyboards/dailycraft/stickey4/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/dailycraft/stickey4/readme.md

@@ -0,0 +1,26 @@
+# stickey4
+
+![stickey4](https://raw.githubusercontent.com/yfuku/stickey4/main/images/stickey4.jpeg)
+
+macropad
+
+* Keyboard Maintainer: [yfuku](https://github.com/yfuku)
+* Hardware Supported: stickey4 PCB, Pro Micro
+* Hardware Availability: https://shop.dailycraft.jp/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dailycraft/stickey4:default
+
+Flashing example for this keyboard:
+
+    make dailycraft/stickey4:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/dailycraft/stickey4/rules.mk

@@ -0,0 +1,20 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+ENCODER_ENABLE = yes

keyboards/dailycraft/stickey4/stickey4.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "stickey4.h"

keyboards/dailycraft/stickey4/stickey4.h

@@ -0,0 +1,36 @@
+/* Copyright 2021 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k04, k05, k06, k07 \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07 } \
+}