Merge remote-tracking branch 'origin/master' into develop

keyboards/mechstudio/ud_40_ortho/config.h

@@ -0,0 +1,60 @@
+/* Copyright 2020 David Dejaeghere
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4D53
+#define PRODUCT_ID      0x0002
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Mech Studio
+#define PRODUCT         UD_40 Ortholinear
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {C2,B4,B5,B6}
+#define MATRIX_COL_PINS {C5,D0,B3,B2,B1,B0,D6,D5,D4,D3,D2,D1}
+#define UNUSED_PINS {C4,C6,C7}
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN B7
+ #ifdef RGB_DI_PIN
+   #define RGBLED_NUM 10
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+ #endif
+
+/* set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+#define QMK_ESC_OUTPUT F0 // usually COL
+#define QMK_ESC_INPUT B7 // usually ROW

keyboards/mechstudio/ud_40_ortho/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "UD_40 ortho", 
+  "url": "https://mech.studio/projects/ud_40/", 
+  "maintainer": "dejaeghered", 
+  "width": 12, 
+  "height": 4, 
+  "layouts": {
+    "LAYOUT_ortho_4x12": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+    }
+  }
+}

keyboards/mechstudio/ud_40_ortho/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2020 David Dejaeghere
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _MA,
+    _LO,
+    _HI
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT_ortho_4x12(
+  KC_ESC,   KC_Q,        KC_W,        KC_E,        KC_R,        KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC,
+  KC_TAB,   KC_A,        KC_S,        KC_D,        KC_F,        KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,
+  KC_LSFT,  KC_Z,        KC_X,        KC_C,        KC_V,        KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_ENT,
+  _______,  KC_LCTRL,    KC_LALT,     KC_LGUI,     MO(_LO),     KC_SPC,   KC_SPC,   MO(_HI),  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT),
+
+[_LO] = LAYOUT_ortho_4x12(
+  KC_GRV,   KC_1,        KC_2,        KC_3,        KC_4,        KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL,
+  KC_TILD,  KC_F1,       KC_F2,       KC_F3,       KC_F4,       KC_F5,    KC_F6,    KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_BSLS,
+  _______,  KC_F7,       KC_F8,       KC_F9,       KC_F10,      KC_F11,   KC_F12,   _______,  _______,  KC_PGUP,  KC_PGDN,  _______,
+  KC_INS,   KC_HOME,     KC_END,      KC_DEL,      _______,     _______,  _______,  _______,  _______,  KC_VOLD,  KC_VOLU,  _______),
+
+[_HI] = LAYOUT_ortho_4x12(
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,  RGB_VAI,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  RGB_RMOD, RGB_HUD,  RGB_SAD,  RGB_VAD,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______),
+};

keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2020 David Dejaeghere
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ortho_4x12(
+  KC_ESC,   KC_Q,        KC_W,        KC_E,        KC_R,        KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC,
+  KC_TAB,   KC_A,        KC_S,        KC_D,        KC_F,        KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,
+  KC_LSFT,  KC_Z,        KC_X,        KC_C,        KC_V,        KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_ENT,
+  _______,  KC_LCTRL,    KC_LALT,     KC_LGUI,     KC_FN13,     KC_SPC,   KC_SPC,   KC_FN23,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT),
+
+[1] = LAYOUT_ortho_4x12(
+  KC_GRV,   KC_1,        KC_2,        KC_3,        KC_4,        KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL,
+  KC_TILD,  KC_F1,       KC_F2,       KC_F3,       KC_F4,       KC_F5,    KC_F6,    KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_BSLS,
+  _______,  KC_F7,       KC_F8,       KC_F9,       KC_F10,      KC_F11,   KC_F12,   _______,  _______,  KC_PGUP,  KC_PGDN,  _______,
+  KC_INS,   KC_HOME,     KC_END,      KC_DEL,      _______,     _______,  _______,  _______,  _______,  KC_VOLD,  KC_VOLU,  _______),
+
+[2] = LAYOUT_ortho_4x12(
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,  RGB_VAI,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  RGB_RMOD, RGB_HUD,  RGB_SAD,  RGB_VAD,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______),
+  
+[3] = LAYOUT_ortho_4x12(
+  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______)
+
+};

keyboards/mechstudio/ud_40_ortho/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/mechstudio/ud_40_ortho/readme.md

@@ -0,0 +1,22 @@
+# ud_40_ortho
+
+![UD_40 ortho](https://storage.googleapis.com/mechstudio-media/images/Cafe_1_1.2e16d0ba.fill-1500x800.png)
+
+## Support
+* Keyboard Maintainer: [NecromanX](https://github.com/dejaeghered)
+* Hardware Supported: UD_40 Ortho
+* Hardware Availability: [mech.studio](https://mech.studio/projects/ud_40/)
+
+## Features
+- QMK Firmware
+- USB-C Connector
+- RGB underglow
+- Ortholinear layout
+- no in switch LEDs
+
+## Build
+Make example for this keyboard (after setting up your build environment):
+
+    make mechstudio/ud_40_ortho:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mechstudio/ud_40_ortho/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = ortho_4x12

keyboards/mechstudio/ud_40_ortho/ud_40_ortho.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 David Dejaeghere
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ud_40_ortho.h"

keyboards/mechstudio/ud_40_ortho/ud_40_ortho.h

@@ -0,0 +1,39 @@
+/* Copyright 2020 David Dejaeghere
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_ortho_4x12( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) { \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+}