1
0
Fork 0

Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-08-10 05:24:08 +00:00
commit 85090b77af
17 changed files with 1370 additions and 0 deletions

View file

@ -0,0 +1,108 @@
/*
Copyright 2021 rate
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x5255
#define PRODUCT_ID 0xF40C
#define DEVICE_VER 0x0001
#define MANUFACTURER rate
#define PRODUCT PistachioPro
#define ENCODERS_PAD_A {D2}
#define ENCODERS_PAD_B {D3}
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 18
#define MATRIX_ROW_PINS { D4, C6, D7, B3, B4, B5 }
#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B6, D6, D5,}
#define UNUSED_PINS
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0
/* OLED */
#define OLED_DISPLAY_128X64
#define OLED_FONT_H "keyboards/pistachio_pro/lib/glcdfont.c"
#define OLED_FONT_WIDTH 6
#define OLED_FONT_HEIGHT 6
#define OLED_UPDATE_INTERVAL 1000
#define OLED_TIMEOUT 0
#define OLED_BRIGHTNESS 255

View file

@ -0,0 +1,101 @@
{
"keyboard_name": "PistachioPro",
"url": "https://rates.booth.pm/items/2925303",
"maintainer": "rate",
"width": 18.25,
"height": 6.5,
"layouts": {
"LAYOUT": {
"layout": [{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":2, "y":0},
{"label":"F2", "x":3, "y":0},
{"label":"F3", "x":4, "y":0},
{"label":"F4", "x":5, "y":0},
{"label":"F5", "x":6.5, "y":0},
{"label":"F6", "x":7.5, "y":0},
{"label":"F7", "x":8.5, "y":0},
{"label":"F8", "x":9.5, "y":0},
{"label":"F9", "x":11, "y":0},
{"label":"F10", "x":12, "y":0},
{"label":"F11", "x":13, "y":0},
{"label":"F12", "x":14, "y":0},
{"label":"Pause", "x":17.25, "y":0},
{"label":"E/J", "x":0, "y":1.5},
{"label":"!", "x":1, "y":1.5},
{"label":"\"", "x":2, "y":1.5},
{"label":"#", "x":3, "y":1.5},
{"label":"$", "x":4, "y":1.5},
{"label":"%", "x":5, "y":1.5},
{"label":"&", "x":6, "y":1.5},
{"label":"'", "x":7, "y":1.5},
{"label":"(", "x":8, "y":1.5},
{"label":")", "x":9, "y":1.5},
{"label":"", "x":10, "y":1.5},
{"label":"=", "x":11, "y":1.5},
{"label":"~", "x":12, "y":1.5},
{"label":"|", "x":13, "y":1.5},
{"label":"BS", "x":14, "y":1.5},
{"label":"Insert", "x":15.25, "y":1.5},
{"label":"Home", "x":16.25, "y":1.5},
{"label":"PgUp", "x":17.25, "y":1.5},
{"label":"Tab", "x":0, "y":2.5, "w":1.5},
{"label":"Q", "x":1.5, "y":2.5},
{"label":"W", "x":2.5, "y":2.5},
{"label":"E", "x":3.5, "y":2.5},
{"label":"R", "x":4.5, "y":2.5},
{"label":"T", "x":5.5, "y":2.5},
{"label":"Y", "x":6.5, "y":2.5},
{"label":"U", "x":7.5, "y":2.5},
{"label":"I", "x":8.5, "y":2.5},
{"label":"O", "x":9.5, "y":2.5},
{"label":"P", "x":10.5, "y":2.5},
{"label":"`", "x":11.5, "y":2.5},
{"label":"{", "x":12.5, "y":2.5},
{"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
{"label":"Delete", "x":15.25, "y":2.5},
{"label":"End", "x":16.25, "y":2.5},
{"label":"PgDn", "x":17.25, "y":2.5},
{"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
{"label":"A", "x":1.75, "y":3.5},
{"label":"S", "x":2.75, "y":3.5},
{"label":"D", "x":3.75, "y":3.5},
{"label":"F", "x":4.75, "y":3.5},
{"label":"G", "x":5.75, "y":3.5},
{"label":"H", "x":6.75, "y":3.5},
{"label":"J", "x":7.75, "y":3.5},
{"label":"K", "x":8.75, "y":3.5},
{"label":"L", "x":9.75, "y":3.5},
{"label":"+", "x":10.75, "y":3.5},
{"label":"*", "x":11.75, "y":3.5},
{"label":"}", "x":12.75, "y":3.5},
{"label":"Shift", "x":0, "y":4.5, "w":2.25},
{"label":"Z", "x":2.25, "y":4.5},
{"label":"X", "x":3.25, "y":4.5},
{"label":"C", "x":4.25, "y":4.5},
{"label":"V", "x":5.25, "y":4.5},
{"label":"B", "x":6.25, "y":4.5},
{"label":"N", "x":7.25, "y":4.5},
{"label":"M", "x":8.25, "y":4.5},
{"label":"<", "x":9.25, "y":4.5},
{"label":">", "x":10.25, "y":4.5},
{"label":"?", "x":11.25, "y":4.5},
{"label":"_", "x":12.25, "y":4.5},
{"label":"Shift", "x":13.25, "y":4.5, "w":1.75},
{"label":"\u2191", "x":16.25, "y":4.5},
{"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
{"label":"Win", "x":1.25, "y":5.5},
{"label":"Alt", "x":2.25, "y":5.5, "w":1.25},
{"x":3.5, "y":5.5},
{"x":4.5, "y":5.5, "w":2.25},
{"x":6.75, "y":5.5, "w":2.25},
{"label":"kana", "x":9, "y":5.5, "w":1.25},
{"x":10.25, "y":5.5, "w":1.25},
{"label":"Alt", "x":11.5, "y":5.5, "w":1.25},
{"label":"Menu", "x":12.75, "y":5.5},
{"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
{"label":"\u2190", "x":15.25, "y":5.5},
{"label":"\u2193", "x":16.25, "y":5.5},
{"label":"\u2192", "x":17.25, "y":5.5}]
}
}
}

View file

@ -0,0 +1,123 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include <stdio.h>
#include "keymap_jp.h"
#include "lib/bme280.h"
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_FN
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base */
[_BASE] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY,
KC_ZKHK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_DEL, KC_END, KC_PGDN,
JP_EISU, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_RSFT, KC_UP,
KC_LCTRL, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, KC_SPC, LT(_FN, JP_HENK), JP_KANA, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, JP_DOT, JP_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
/* OLED */
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '
};
static void print_airstate(void) {
char airstate_str[32];
double temp;
double press;
double hum;
temp = bme280_getTemp();
press = bme280_getPress();
hum = bme280_getHum();
oled_write_ln_P(PSTR("\nTemp Press Hum"), false);
snprintf(airstate_str, sizeof(airstate_str), "%ddeg %dhPa %d%% \n", (int)temp, (int)press, (int)hum );
oled_write(airstate_str, false);
return;
}
static keyrecord_t keylog_record;
static void print_keylog(void) {
char keylog_str[32];
oled_write_ln_P(PSTR("\nKeylog"), false);
snprintf(keylog_str, sizeof(keylog_str), "row:%d col:%d", keylog_record.event.key.row, keylog_record.event.key.col );
oled_write(keylog_str, false);
return;
}
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
return OLED_ROTATION_180;
}
void oled_task_user(void) {
oled_write_ln_P(PSTR(" - PistachioPro -"), false);
print_airstate();
print_keylog();
return;
}
/* Encoder */
bool encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) {
// Volume control
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
return true;
}
/* Keyboard */
void keyboard_post_init_user(void) {
bme280_init();
}
void housekeeping_task_user(void) {
bme280_exec();
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
keylog_record = *record;
}
return true;
}

View file

@ -0,0 +1 @@
# The default keymap for pistachio_mp

View file

@ -0,0 +1,125 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include <stdio.h>
#include "keymap_jp.h"
#include "lib/bme280.h"
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_FN
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base */
[_BASE] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY,
KC_ZKHK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_DEL, KC_END, KC_PGDN,
KC_ENT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_RSFT, KC_UP,
KC_LCTRL, KC_LGUI, KC_LALT, KC_DEL, KC_SPC, KC_SPC, LT(_FN, KC_ESC), JP_KANA, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, JP_DOT, JP_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
/* OLED */
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '
};
static void print_airstate(void) {
char airstate_str[32];
double temp;
double press;
double hum;
temp = bme280_getTemp();
press = bme280_getPress();
hum = bme280_getHum();
oled_write_ln_P(PSTR("\nTemp Press Hum"), false);
snprintf(airstate_str, sizeof(airstate_str), "%ddeg %dhPa %d%% \n", (int)temp, (int)press, (int)hum );
oled_write(airstate_str, false);
return;
}
static keyrecord_t keylog_record;
static void print_keylog(void) {
char keylog_str[32];
oled_write_ln_P(PSTR("\nKeylog"), false);
snprintf(keylog_str, sizeof(keylog_str), "row:%d col:%d", keylog_record.event.key.row, keylog_record.event.key.col );
oled_write(keylog_str, false);
return;
}
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
return OLED_ROTATION_180;
}
void oled_task_user(void) {
oled_write_ln_P(PSTR(" - PistachioPro -"), false);
print_airstate();
print_keylog();
return;
}
/* Encoder */
bool encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) {
// Volume control
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
return true;
}
/* Keyboard */
void keyboard_post_init_user(void) {
bme280_init();
}
void housekeeping_task_user(void) {
bme280_exec();
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
keylog_record = *record;
}
return true;
}

View file

@ -0,0 +1 @@
# The rate's keymap for pistachio_mp

View file

@ -0,0 +1,141 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include <stdio.h>
#include "keymap_jp.h"
#include "lib/bme280.h"
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_FN,
_RESERVE_0,
_RESERVE_1
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base */
[_BASE] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY,
KC_ZKHK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_DEL, KC_END, KC_PGDN,
JP_EISU, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_RSFT, KC_UP,
KC_LCTRL, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, KC_SPC, LT(_FN, JP_HENK), JP_KANA, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, JP_DOT, JP_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_RESERVE_0] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_RESERVE_1] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
/* OLED */
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '
};
static void print_airstate(void) {
char airstate_str[32];
double temp;
double press;
double hum;
temp = bme280_getTemp();
press = bme280_getPress();
hum = bme280_getHum();
oled_write_ln_P(PSTR("\nTemp Press Hum"), false);
snprintf(airstate_str, sizeof(airstate_str), "%ddeg %dhPa %d%% \n", (int)temp, (int)press, (int)hum );
oled_write(airstate_str, false);
return;
}
static keyrecord_t keylog_record;
static void print_keylog(void) {
char keylog_str[32];
oled_write_ln_P(PSTR("\nKeylog"), false);
snprintf(keylog_str, sizeof(keylog_str), "row:%d col:%d", keylog_record.event.key.row, keylog_record.event.key.col );
oled_write(keylog_str, false);
return;
}
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
return OLED_ROTATION_180;
}
void oled_task_user(void) {
oled_write_ln_P(PSTR(" - PistachioPro -"), false);
print_airstate();
print_keylog();
return;
}
/* Encoder */
bool encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) {
// Volume control
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
return true;
}
/* Keyboard */
void keyboard_post_init_user(void) {
bme280_init();
}
void housekeeping_task_user(void) {
bme280_exec();
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
keylog_record = *record;
}
return true;
}

View file

@ -0,0 +1 @@
# The via keymap for pistachio_mp

View file

@ -0,0 +1 @@
VIA_ENABLE = yes

View file

@ -0,0 +1,255 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "bme280.h"
#include "i2c_master.h"
#define BME280_ADDRESS (0x76<<1)
#define BME280_REG_CALIB00 (0x88)
#define BME280_REG_CALIB25 (0xA1)
#define BME280_REG_CALIB26 (0xE1)
#define BME280_REG_CTRL_HUM (0xF2)
#define BME280_REG_CTRL_MEAS (0xF4)
#define BME280_REG_CONFIG (0xF5)
#define BME280_REG_PRESS_MSB (0xf7)
#define I2C_BME280_TIMEOUT (20)
/* BME280 configurator values */
/* [2:0] Humidity oversampling
* 000 Skipped
* 001 oversampling x1
* 010 oversampling x2
* 011 oversampling x4
* 100 oversampling x8
* 101,others oversampling x16
*/
#define BME280_CTRL_HUM_VAL (0x01)
/* [7:5] Pressure oversampling
* 000 Skipped
* 001 oversampling x1
* 010 oversampling x2
* 011 oversampling x4
* 100 oversampling x8
* 101,others oversampling x16
* [4:2] Temperature oversampling
* 000 Skipped
* 001 oversampling x1
* 010 oversampling x2
* 011 oversampling x4
* 100 oversampling x8
* 101,others oversampling x16
* [1:0] Mode
* 00 Sleep mode
* 11 Normal mode
*/
#define BME280_CTRL_MEAS_VAL (0x27)
/* [7:5] t_standby[ms]
* 000 0.5
* 001 62.5
* 010 125
* 011 250
* 100 500
* 101 1000
* 110 10
* 111 20
* [4:2] Filter corefficient
* 000 Filter off
* 001 2
* 010 4
* 011 8
* 100,others 16
* [0] SPI interface
* 0 4-wire
* 1 3-wire
*/
#define BME280_CONFIG_VAL (0xA0)
static void readTrim(void);
static void readData(void);
static int32_t calibration_T(int32_t adc_T);
static uint32_t calibration_P(int32_t adc_P);
static uint32_t calibration_H(int32_t adc_H);
static uint32_t hum_raw,temp_raw,pres_raw;
static uint16_t dig_T1;
static int16_t dig_T2, dig_T3;
static uint16_t dig_P1;
static int16_t dig_P2, dig_P3, dig_P4, dig_P5, dig_P6, dig_P7, dig_P8, dig_P9;
static uint8_t dig_H1, dig_H3;
static int16_t dig_H2, dig_H4, dig_H5;
static int8_t dig_H6;
static int32_t t_fine;
/* Private */
static void readTrim(void) {
uint8_t data[32];
i2c_readReg(BME280_ADDRESS, BME280_REG_CALIB00, &data[0], 24, I2C_BME280_TIMEOUT);
i2c_readReg(BME280_ADDRESS, BME280_REG_CALIB25, &data[25], 1, I2C_BME280_TIMEOUT);
i2c_readReg(BME280_ADDRESS, BME280_REG_CALIB26, &data[25], 7, I2C_BME280_TIMEOUT);
dig_T1 = (data[1] << 8) | data[0];
dig_T2 = (data[3] << 8) | data[2];
dig_T3 = (data[5] << 8) | data[4];
dig_P1 = (data[7] << 8) | data[6];
dig_P2 = (data[9] << 8) | data[8];
dig_P3 = (data[11]<< 8) | data[10];
dig_P4 = (data[13]<< 8) | data[12];
dig_P5 = (data[15]<< 8) | data[14];
dig_P6 = (data[17]<< 8) | data[16];
dig_P7 = (data[19]<< 8) | data[18];
dig_P8 = (data[21]<< 8) | data[20];
dig_P9 = (data[23]<< 8) | data[22];
dig_H1 = data[24];
dig_H2 = (data[26]<< 8) | data[25];
dig_H3 = data[27];
dig_H4 = (data[28]<< 4) | (0x0F & data[29]);
dig_H5 = (data[30] << 4) | ((data[29] >> 4) & 0x0F);
dig_H6 = data[31];
return;
}
static void readData(void) {
uint8_t data[8];
i2c_readReg(BME280_ADDRESS, 0xF7, &data[0], 8, I2C_BME280_TIMEOUT);
pres_raw = data[0];
pres_raw = (pres_raw<<8) | data[1];
pres_raw = (pres_raw<<4) | (data[2] >> 4);
temp_raw = data[3];
temp_raw = (temp_raw<<8) | data[4];
temp_raw = (temp_raw<<4) | (data[5] >> 4);
hum_raw = data[6];
hum_raw = (hum_raw << 8) | data[7];
return;
}
static int32_t calibration_T(int32_t adc_T) {
int32_t var1, var2, T;
var1 = ((((adc_T >> 3) - ((int32_t)dig_T1<<1))) * ((int32_t)dig_T2)) >> 11;
var2 = (((((adc_T >> 4) - ((int32_t)dig_T1)) * ((adc_T>>4) - ((int32_t)dig_T1))) >> 12) * ((int32_t)dig_T3)) >> 14;
t_fine = var1 + var2;
T = (t_fine * 5 + 128) >> 8;
return T;
}
static uint32_t calibration_P(int32_t adc_P) {
int32_t var1, var2;
uint32_t P;
var1 = (((int32_t)t_fine)>>1) - (int32_t)64000;
var2 = (((var1>>2) * (var1>>2)) >> 11) * ((int32_t)dig_P6);
var2 = var2 + ((var1*((int32_t)dig_P5))<<1);
var2 = (var2>>2)+(((int32_t)dig_P4)<<16);
var1 = (((dig_P3 * (((var1>>2)*(var1>>2)) >> 13)) >>3) + ((((int32_t)dig_P2) * var1)>>1))>>18;
var1 = ((((32768+var1))*((int32_t)dig_P1))>>15);
if (var1 == 0) {
return 0;
}
P = (((uint32_t)(((int32_t)1048576)-adc_P)-(var2>>12)))*3125;
if( P < 0x80000000 ) {
P = (P << 1) / ((uint32_t) var1);
} else {
P = (P / (uint32_t)var1) * 2;
}
var1 = (((int32_t)dig_P9) * ((int32_t)(((P>>3) * (P>>3))>>13)))>>12;
var2 = (((int32_t)(P>>2)) * ((int32_t)dig_P8))>>13;
P = (uint32_t)((int32_t)P + ((var1 + var2 + dig_P7) >> 4));
return P;
}
static uint32_t calibration_H(int32_t adc_H) {
int32_t v_x1;
v_x1 = (t_fine - ((int32_t)76800));
v_x1 = (((((adc_H << 14) -(((int32_t)dig_H4) << 20) - (((int32_t)dig_H5) * v_x1)) +
((int32_t)16384)) >> 15) * (((((((v_x1 * ((int32_t)dig_H6)) >> 10) *
(((v_x1 * ((int32_t)dig_H3)) >> 11) + ((int32_t) 32768))) >> 10) + (( int32_t)2097152)) *
((int32_t) dig_H2) + 8192) >> 14));
v_x1 = (v_x1 - (((((v_x1 >> 15) * (v_x1 >> 15)) >> 7) * ((int32_t)dig_H1)) >> 4));
v_x1 = (v_x1 < 0 ? 0 : v_x1);
v_x1 = (v_x1 > 419430400 ? 419430400 : v_x1);
return (uint32_t)(v_x1 >> 12);
}
/* Public */
void bme280_init(void) {
uint8_t ctrl_hum_reg;
uint8_t ctrl_meas_reg;
uint8_t config_reg;
ctrl_hum_reg = BME280_CTRL_HUM_VAL;
ctrl_meas_reg = BME280_CTRL_MEAS_VAL;
config_reg = BME280_CONFIG_VAL;
i2c_init();
i2c_writeReg(BME280_ADDRESS, BME280_REG_CTRL_HUM, &ctrl_hum_reg, 1, I2C_BME280_TIMEOUT);
i2c_writeReg(BME280_ADDRESS, BME280_REG_CTRL_MEAS, &ctrl_meas_reg, 1, I2C_BME280_TIMEOUT);
i2c_writeReg(BME280_ADDRESS, BME280_REG_CONFIG, &config_reg, 1, I2C_BME280_TIMEOUT);
readTrim();
return;
}
void bme280_exec(void) {
readData();
return;
}
double bme280_getTemp(void) {
double temp_act;
int32_t temp_cal;
temp_cal = calibration_T(temp_raw);
temp_act = (double)temp_cal / 100.0;
return temp_act;
}
double bme280_getPress(void) {
double press_act;
uint32_t press_cal;
press_cal = calibration_P(pres_raw);
press_act = (double)press_cal / 100.0;
return press_act;
}
double bme280_getHum(void) {
double hum_act;
uint32_t hum_cal;
hum_cal = calibration_H(hum_raw);
hum_act = (double)hum_cal / 1024.0;
return hum_act;
}

View file

@ -0,0 +1,22 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
void bme280_init(void);
void bme280_exec(void);
double bme280_getTemp(void);
double bme280_getPress(void);
double bme280_getHum(void);

View file

@ -0,0 +1,232 @@
// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
// See gfxfont.h for newer custom bitmap font info.
#include "progmem.h"
// Standard ASCII 5x7 font
const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0,
0xF0, 0xF8, 0xF8, 0x18, 0x00, 0xC0,
0xF0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x7E, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0,
0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0,
0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80,
0x00, 0x00, 0x00, 0xE0, 0xE0, 0xC0,
0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00,
0x00, 0xE0, 0xE0, 0xC0, 0xC0, 0xE0,
0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x80, 0xC0,
0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE,
0xFF, 0xE0, 0x00, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0x80, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0x1F, 0x07, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0xFF, 0xFF, 0xFF, 0x81, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x81,
0xC3, 0xC3, 0xC3, 0x00, 0x00, 0xFF,
0xFF, 0xFF, 0x81, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x81, 0xFF, 0xFF,
0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0xFF, 0xFF, 0xFF, 0x01, 0x00,
0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
0x9D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F,
0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F,
0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F,
0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C,
0x0F, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x01, 0x03, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
0x03, 0x01, 0x00, 0x00, 0x00, 0x00,
0x01, 0x03, 0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07, 0x03, 0x01,
0x00, 0x00, 0x00, 0x07, 0x07, 0x07,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x07, 0x07, 0x07, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x07, 0x07,
0x07, 0x00, 0x00, 0x00, 0x01, 0x03,
0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x03, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};

View file

@ -0,0 +1,151 @@
/*
Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "matrix.h"
#include "quantum.h"
static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
static inline void setPinOutput_writeLow(pin_t pin) {
ATOMIC_BLOCK_FORCEON {
setPinOutput(pin);
writePinLow(pin);
}
}
static inline void setPinInputHigh_atomic(pin_t pin) {
ATOMIC_BLOCK_FORCEON { setPinInputHigh(pin); }
}
static void select_row(uint8_t row) {
setPinOutput_writeLow(row_pins[row]);
}
static void unselect_row(uint8_t row) {
setPinInputHigh_atomic(row_pins[row]);
}
static void unselect_rows(void) {
for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
setPinInputHigh_atomic(row_pins[x]);
}
}
static void select_col(uint8_t col) {
setPinOutput_writeLow(col_pins[col]);
}
static void unselect_col(uint8_t col) {
setPinInputHigh_atomic(col_pins[col]);
}
static void unselect_cols(void) {
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputHigh_atomic(col_pins[x]);
}
}
static void init_pins(void) {
unselect_rows();
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputHigh_atomic(col_pins[x]);
}
unselect_cols();
for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
setPinInputHigh_atomic(row_pins[x]);
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Select row
select_row(current_row);
matrix_io_delay();
// For each col...
for (uint8_t col_index = 0; col_index < MATRIX_COLS / 2; col_index++) {
// Check row pin state
if (readPin(col_pins[col_index])) {
// Pin HI, clear col bit
current_matrix[current_row] &= ~(MATRIX_ROW_SHIFTER << col_index);
} else {
// Pin LO, set col bit
current_matrix[current_row] |= (MATRIX_ROW_SHIFTER << col_index);
}
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
bool matrix_changed = false;
// Select col
select_col(current_col);
matrix_io_delay();
// For each row...
for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if (readPin(row_pins[row_index])) {
// Pin HI, clear col bit
current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << ( current_col + MATRIX_COLS/2));
} else {
// Pin LO, set col bit
current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << ( current_col + MATRIX_COLS/2));
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
void matrix_init_custom(void) {
init_pins();
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
// Set row, read cols
for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
changed |= read_cols_on_row(current_matrix, current_row);
}
// Set col, read rows
for (uint8_t current_col = 0; current_col < (MATRIX_COLS/2); current_col++) {
changed |= read_rows_on_col(current_matrix, current_col);
}
return (uint8_t)changed;
}

View file

@ -0,0 +1,17 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "pistachio_pro.h"

View file

@ -0,0 +1,42 @@
/* Copyright 2021 rate
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, \
k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, \
k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, \
k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, \
k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, \
k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k510, k511, k512, k513 ) { \
{ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117 }, \
{ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, KC_NO, KC_NO }, \
{ k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k510, k511, k512, k513, KC_NO, KC_NO, KC_NO, KC_NO } \
}

View file

@ -0,0 +1,21 @@
# PistachioPro
![PistachioPro](https://ratelog.net/wp-content/uploads/2021/07/PistachioPro-scaled.jpg)
This is a JIS layout TKL keyboard with 89 keys, encoder and OLED.
* Keyboard Maintainer: [rate](https://github.com/7-rate)
* Hardware Supported: PistachioPro PCB,
* Hardware Availability: [Booth Shop](https://rates.booth.pm/items/2925303)
Make example for this keyboard (after setting up your build environment):
make pistachio_pro:default
Flashing example for this keyboard:
make pistachio_pro:default:flash
To reset the keyboard into bootloader mode, press the reset switch on the underside.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,28 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
OLED_DRIVER_ENABLE = yes
ENCODER_ENABLE = yes
CUSTOM_MATRIX = lite
SRC += matrix.c
SRC += ./lib/bme280.c