diff --git a/keyboards/annepro2/annepro2.c b/keyboards/annepro2/annepro2.c new file mode 100644 index 0000000000..37489defff --- /dev/null +++ b/keyboards/annepro2/annepro2.c @@ -0,0 +1,202 @@ +/* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "hal.h" +#include "annepro2.h" +#include "annepro2_ble.h" +#include "spi_master.h" +#include "ap2_led.h" +#include "protocol.h" + +#define RAM_MAGIC_LOCATION 0x20001ffc +#define IAP_MAGIC_VALUE 0x0000fab2 + +static const SerialConfig ledUartInitConfig = { + .speed = 115200, +}; + +#ifndef LED_UART_BAUD_RATE +# define LED_UART_BAUD_RATE 115200 +#endif // LED_UART_BAUD_RATE + +static const SerialConfig ledUartRuntimeConfig = { + .speed = LED_UART_BAUD_RATE, +}; + +static const SerialConfig bleUartConfig = { + .speed = 115200, +}; + +static uint8_t ledMcuWakeup[11] = {0x7b, 0x10, 0x43, 0x10, 0x03, 0x00, 0x00, 0x7d, 0x02, 0x01, 0x02}; + +ble_capslock_t BLECapsLock = {._dummy = {0}, .caps_lock = false}; + +void bootloader_jump(void) { + // Send msg to shine to boot into IAP + annepro2SetIAP(); + + // wait for shine to boot into IAP + wait_ms(15); + + // Load ble into IAP + annepro2_ble_bootload(); + wait_ms(15); + + // Magic key to set keyboard to IAP + // It’s from reversing original boot loader + // If value is that it stays in boot loader aka IAP + *((uint32_t *)RAM_MAGIC_LOCATION) = IAP_MAGIC_VALUE; + + // Load the main MCU into IAP + __disable_irq(); + NVIC_SystemReset(); +} + +void keyboard_pre_init_kb(void) { + // Start LED UART + sdStart(&SD0, &ledUartInitConfig); + /* Let the LED chip settle a bit before switching the mode. + * That helped at least one person. */ + wait_ms(15); + sdWrite(&SD0, ledMcuWakeup, sizeof(ledMcuWakeup)); + + // wait to receive response from wakeup + wait_ms(15); + + protoInit(&proto, ledCommandCallback); + + // loop to clear out receive buffer from shine wakeup + while (!sdGetWouldBlock(&SD0)) sdGet(&SD0); + + sdStart(&SD0, &ledUartRuntimeConfig); + keyboard_pre_init_user(); +} + +void keyboard_post_init_kb(void) { + // Start BLE UART + sdStart(&SD1, &bleUartConfig); + annepro2_ble_startup(); + + // Give the send uart thread some time to + // send out the queue before we read back + wait_ms(100); + + // loop to clear out receive buffer from ble wakeup + while (!sdGetWouldBlock(&SD1)) sdGet(&SD1); + + annepro2LedGetStatus(); + + keyboard_post_init_user(); +} + +void matrix_scan_kb() { + // if there's stuff on the ble serial buffer + // read it into the capslock struct + while (!sdGetWouldBlock(&SD1)) { + sdReadTimeout(&SD1, (uint8_t *)&BLECapsLock, sizeof(ble_capslock_t), 10); + } + + /* While there's data from LED keyboard sent - read it. */ + while (!sdGetWouldBlock(&SD0)) { + uint8_t byte = sdGet(&SD0); + protoConsume(&proto, byte); + } + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + if (annepro2LedStatus.matrixEnabled && annepro2LedStatus.isReactive) { + annepro2LedForwardKeypress(record->event.key.row, record->event.key.col); + } + + const annepro2Led_t blue = { + .p.blue = 0xff, + .p.red = 0x00, + .p.green = 0x00, + .p.alpha = 0xff, + }; + + switch (keycode) { + case KC_AP2_BT1: + annepro2_ble_broadcast(0); + /* FIXME: This hardcodes col/row position */ + annepro2LedBlink(0, 1, blue, 8, 50); + return false; + + case KC_AP2_BT2: + annepro2_ble_broadcast(1); + annepro2LedBlink(0, 2, blue, 8, 50); + return false; + + case KC_AP2_BT3: + annepro2_ble_broadcast(2); + annepro2LedBlink(0, 3, blue, 8, 50); + return false; + + case KC_AP2_BT4: + annepro2_ble_broadcast(3); + annepro2LedBlink(0, 4, blue, 8, 50); + return false; + + case KC_AP2_USB: + annepro2_ble_disconnect(); + return false; + + case KC_AP2_BT_UNPAIR: + annepro2_ble_unpair(); + return false; + + case KC_AP_LED_OFF: + annepro2LedDisable(); + break; + + case KC_AP_LED_ON: + if (annepro2LedStatus.matrixEnabled) { + annepro2LedNextProfile(); + } else { + annepro2LedEnable(); + } + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_NEXT_PROFILE: + annepro2LedNextProfile(); + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_PREV_PROFILE: + annepro2LedPrevProfile(); + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_NEXT_INTENSITY: + annepro2LedNextIntensity(); + annepro2LedResetForegroundColor(); + return false; + + case KC_AP_LED_SPEED: + annepro2LedNextAnimationSpeed(); + annepro2LedResetForegroundColor(); + return false; + + default: + break; + } + } + return process_record_user(keycode, record); +} diff --git a/keyboards/annepro2/annepro2.h b/keyboards/annepro2/annepro2.h new file mode 100644 index 0000000000..b08f8c5352 --- /dev/null +++ b/keyboards/annepro2/annepro2.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2018 Yaotian Feng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "quantum.h" +#include +#include "ap2_led.h" + +typedef struct __attribute__((__packed__)) { + uint8_t _dummy[10]; + bool caps_lock; +} ble_capslock_t; +extern ble_capslock_t BLECapsLock; + +// Matrix keymap +// clang-format off +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K42, K43, K46, K49, K4A, K4B, K4C \ +) { \ + /* COL1 COL2 COL3 COL4 COL5 COL6 COL7 COL8 COL9 COL10 COL11 COL12 COL13 COL14*/ \ + /* ROW1 */ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + /* ROW2 */ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + /* ROW3 */ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO}, \ + /* ROW4 */ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO}, \ + /* ROW5 */ { K40, KC_NO, K42, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, K4C, KC_NO}, \ +} +// clang-format on + +enum AP2KeyCodes { + KC_AP2_BT1 = SAFE_RANGE, + KC_AP2_BT2, + KC_AP2_BT3, + KC_AP2_BT4, + KC_AP2_BT_UNPAIR, + KC_AP2_USB, + KC_AP_LED_ON, + KC_AP_LED_OFF, + KC_AP_LED_NEXT_PROFILE, + KC_AP_LED_PREV_PROFILE, + KC_AP_LED_NEXT_INTENSITY, + KC_AP_LED_SPEED, + AP2_SAFE_RANGE, +}; + +#undef SAFE_RANGE +#define SAFE_RANGE AP2_SAFE_RANGE + diff --git a/keyboards/annepro2/annepro2_ble.c b/keyboards/annepro2/annepro2_ble.c new file mode 100644 index 0000000000..72cbb68016 --- /dev/null +++ b/keyboards/annepro2/annepro2_ble.c @@ -0,0 +1,170 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "annepro2_ble.h" +#include "ch.h" +#include "hal.h" +#include "host.h" +#include "host_driver.h" +#include "report.h" + +/* -------------------- Static Function Prototypes -------------------------- */ +static uint8_t ap2_ble_leds(void); +static void ap2_ble_mouse(report_mouse_t *report); +static void ap2_ble_system(uint16_t data); +static void ap2_ble_consumer(uint16_t data); +static void ap2_ble_keyboard(report_keyboard_t *report); + +static void ap2_ble_swtich_ble_driver(void); + +/* -------------------- Static Local Variables ------------------------------ */ +static host_driver_t ap2_ble_driver = { + ap2_ble_leds, ap2_ble_keyboard, ap2_ble_mouse, ap2_ble_system, ap2_ble_consumer, +}; + +static uint8_t bleMcuWakeup[11] = {0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x01, 0x7d, 0x02, 0x01, 0x02}; + +static uint8_t bleMcuStartBroadcast[11] = { + 0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x00, 0x7d, 0x40, 0x01, 0x00 // Broadcast ID[0-3] +}; + +static uint8_t bleMcuConnect[11] = { + 0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x00, 0x7d, 0x40, 0x04, 0x00 // Connect ID [0-3] +}; + +static uint8_t bleMcuSendReport[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x0A, 0x00, 0x00, 0x7d, 0x10, 0x04, +}; + +static uint8_t bleMcuSendConsumerReport[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x06, 0x00, 0x00, 0x7d, 0x10, 0x08, +}; + +static uint8_t bleMcuUnpair[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x02, 0x00, 0x00, 0x7d, 0x40, 0x05, +}; + +static uint8_t bleMcuBootload[11] = {0x7b, 0x10, 0x51, 0x10, 0x03, 0x00, 0x00, 0x7d, 0x02, 0x01, 0x01}; + +static host_driver_t *lastHostDriver = NULL; +#ifdef NKRO_ENABLE +static bool lastNkroStatus = false; +#endif // NKRO_ENABLE + +/* -------------------- Public Function Implementation ---------------------- */ + +void annepro2_ble_bootload(void) { sdWrite(&SD1, bleMcuBootload, sizeof(bleMcuBootload)); } + +void annepro2_ble_startup(void) { sdWrite(&SD1, bleMcuWakeup, sizeof(bleMcuWakeup)); } + +void annepro2_ble_broadcast(uint8_t port) { + if (port > 3) { + port = 3; + } + // sdPut(&SD1, 0x00); + sdWrite(&SD1, bleMcuStartBroadcast, sizeof(bleMcuStartBroadcast)); + sdPut(&SD1, port); + static int lastBroadcast = -1; + if (lastBroadcast == port) { + annepro2_ble_connect(port); + } + lastBroadcast = port; +} + +void annepro2_ble_connect(uint8_t port) { + if (port > 3) { + port = 3; + } + sdWrite(&SD1, bleMcuConnect, sizeof(bleMcuConnect)); + sdPut(&SD1, port); + ap2_ble_swtich_ble_driver(); +} + +void annepro2_ble_disconnect(void) { + /* Skip if the driver is already enabled */ + if (host_get_driver() != &ap2_ble_driver) { + return; + } + + clear_keyboard(); +#ifdef NKRO_ENABLE + keymap_config.nkro = lastNkroStatus; +#endif + host_set_driver(lastHostDriver); +} + +void annepro2_ble_unpair(void) { + // sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuUnpair, sizeof(bleMcuUnpair)); +} + +/* ------------------- Static Function Implementation ----------------------- */ +static void ap2_ble_swtich_ble_driver(void) { + if (host_get_driver() == &ap2_ble_driver) { + return; + } + clear_keyboard(); + lastHostDriver = host_get_driver(); +#ifdef NKRO_ENABLE + lastNkroStatus = keymap_config.nkro; +#endif + keymap_config.nkro = false; + host_set_driver(&ap2_ble_driver); +} + +static uint8_t ap2_ble_leds(void) { + return 0; // TODO: Figure out how to obtain LED status +} + +static void ap2_ble_mouse(report_mouse_t *report) {} + +static void ap2_ble_system(uint16_t data) {} + +static inline uint16_t CONSUMER2AP2(uint16_t usage) { + switch (usage) { + case AUDIO_VOL_DOWN: + return 0x04; + case AUDIO_VOL_UP: + return 0x02; + case AUDIO_MUTE: + return 0x01; + case TRANSPORT_PLAY_PAUSE: + return 0x08; + case TRANSPORT_NEXT_TRACK: + return 0x10; + case TRANSPORT_PREV_TRACK: + return 0x20; + default: + return 0x00; + } +} + +static void ap2_ble_consumer(uint16_t data) { + sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuSendConsumerReport, sizeof(bleMcuSendConsumerReport)); + sdPut(&SD1, CONSUMER2AP2(data)); + static const uint8_t dummy[3] = {0}; + sdWrite(&SD1, dummy, sizeof(dummy)); +} + +/*! + * @brief Send keyboard HID report for Bluetooth driver + */ +static void ap2_ble_keyboard(report_keyboard_t *report) { + sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuSendReport, sizeof(bleMcuSendReport)); + sdWrite(&SD1, &report->raw[0], KEYBOARD_REPORT_SIZE); +} diff --git a/keyboards/annepro2/annepro2_ble.h b/keyboards/annepro2/annepro2_ble.h new file mode 100644 index 0000000000..0cfb68e071 --- /dev/null +++ b/keyboards/annepro2/annepro2_ble.h @@ -0,0 +1,27 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once + +#include "annepro2.h" +#include "quantum.h" + +void annepro2_ble_bootload(void); +void annepro2_ble_startup(void); +void annepro2_ble_broadcast(uint8_t port); +void annepro2_ble_connect(uint8_t port); +void annepro2_ble_disconnect(void); +void annepro2_ble_unpair(void); diff --git a/keyboards/annepro2/ap2_led.c b/keyboards/annepro2/ap2_led.c new file mode 100644 index 0000000000..9969fcd02a --- /dev/null +++ b/keyboards/annepro2/ap2_led.c @@ -0,0 +1,134 @@ +/* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include "hal.h" +#include "annepro2.h" +#include "ap2_led.h" +#include "protocol.h" + +annepro2Led_t ledMask[KEY_COUNT]; +annepro2LedStatus_t annepro2LedStatus; + +void ledCommandCallback(const message_t *msg) { + switch (msg->command) { + case CMD_LED_STATUS: + annepro2LedStatus.amountOfProfiles = msg->payload[0]; + annepro2LedStatus.currentProfile = msg->payload[1]; + annepro2LedStatus.matrixEnabled = msg->payload[2]; + annepro2LedStatus.isReactive = msg->payload[3]; + annepro2LedStatus.ledIntensity = msg->payload[4]; + annepro2LedStatus.errors = msg->payload[5]; + break; + +#ifdef CONSOLE_ENABLE + case CMD_LED_DEBUG: + /* TODO: Don't use printf. */ + printf("LED:"); + for (int i = 0; i < msg->payloadSize; i++) { + printf("%02x ", msg->payload[i]); + } + for (int i = 0; i < msg->payloadSize; i++) { + printf("%c", msg->payload[i]); + } + printf("\n"); + break; +#endif + } +} + +void annepro2SetIAP(void) { protoTx(CMD_LED_IAP, NULL, 0, 3); } + +void annepro2LedDisable(void) { protoTx(CMD_LED_OFF, NULL, 0, 3); } + +void annepro2LedEnable(void) { protoTx(CMD_LED_ON, NULL, 0, 3); } + +void annepro2LedSetProfile(uint8_t prof) { protoTx(CMD_LED_SET_PROFILE, &prof, sizeof(prof), 3); } + +void annepro2LedGetStatus() { protoTx(CMD_LED_GET_STATUS, NULL, 0, 3); } + +void annepro2LedNextProfile() { protoTx(CMD_LED_NEXT_PROFILE, NULL, 0, 3); } + +void annepro2LedNextIntensity() { protoTx(CMD_LED_NEXT_INTENSITY, NULL, 0, 3); } + +void annepro2LedNextAnimationSpeed() { protoTx(CMD_LED_NEXT_ANIMATION_SPEED, NULL, 0, 3); } + +void annepro2LedPrevProfile() { protoTx(CMD_LED_PREV_PROFILE, NULL, 0, 3); } + +void annepro2LedMaskSetKey(uint8_t row, uint8_t col, annepro2Led_t color) { + uint8_t payload[] = {row, col, color.p.blue, color.p.green, color.p.red, color.p.alpha}; + protoTx(CMD_LED_MASK_SET_KEY, payload, sizeof(payload), 1); +} + +/* Push a whole local row to the shine */ +void annepro2LedMaskSetRow(uint8_t row) { + uint8_t payload[NUM_COLUMN * sizeof(annepro2Led_t) + 1]; + payload[0] = row; + memcpy(payload + 1, &ledMask[ROWCOL2IDX(row, 0)], sizeof(*ledMask) * NUM_COLUMN); + protoTx(CMD_LED_MASK_SET_ROW, payload, sizeof(payload), 1); +} + +/* Synchronize all rows */ +void annepro2LedMaskSetAll(void) { + for (int row = 0; row < 5; row++) annepro2LedMaskSetRow(row); +} + +/* Set all keys to a given color */ +void annepro2LedMaskSetMono(const annepro2Led_t color) { protoTx(CMD_LED_MASK_SET_MONO, (uint8_t *)&color, sizeof(color), 1); } + +void annepro2LedBlink(uint8_t row, uint8_t col, annepro2Led_t color, uint8_t count, uint8_t hundredths) { + uint8_t payload[] = {row, col, color.p.blue, color.p.green, color.p.red, color.p.alpha, count, hundredths}; + protoTx(CMD_LED_KEY_BLINK, payload, sizeof(payload), 1); +} + +void annepro2LedSetForegroundColor(uint8_t red, uint8_t green, uint8_t blue) { + annepro2Led_t color = {.p.red = red, .p.green = green, .p.blue = blue, .p.alpha = 0xff}; + annepro2LedMaskSetMono(color); +} + +void annepro2LedResetForegroundColor() { + annepro2Led_t color = { + .p.red = 0, + .p.green = 0, + .p.blue = 0, + .p.alpha = 0, + }; + annepro2LedMaskSetMono(color); +} + +/* + * Currently keypresses are unified with other messages, still with single 1 + * byte payload. Transfer is normally fast enough for that to not be a problem - + * especially with asynchronous message reading. + * + * + * Previous description: + * If enabled, this data is sent to LED MCU on every keypress. + * In order to improve performance, both row and column values + * are packed into a single byte. + * Row range is [0, 4] and requires only 3 bits. + * Column range is [0, 13] and requires 4 bits. + * + * In order to differentiate this command from regular commands, + * the leftmost bit is set to 1 (0b10000000). + * Following it are 3 bits of row and 4 bits of col. + * 1 + 3 + 4 = 8 bits - only a single byte is sent for every keypress. + */ +void annepro2LedForwardKeypress(uint8_t row, uint8_t col) { + const uint8_t payload = row << 4 | col; + protoTx(CMD_LED_KEY_DOWN, &payload, 1, 1); +} diff --git a/keyboards/annepro2/ap2_led.h b/keyboards/annepro2/ap2_led.h new file mode 100644 index 0000000000..23712a2555 --- /dev/null +++ b/keyboards/annepro2/ap2_led.h @@ -0,0 +1,84 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "protocol.h" + +// Struct defining an LED and its RGB color components +// Compatible with Shine firmware. +typedef union { + struct { + /* Little endian ordering to match uint32_t */ + uint8_t blue, green, red; + /* Used in mask; nonzero means - use color from mask. */ + uint8_t alpha; + } p; /* parts */ + /* Parts vector access: 0 - blue, 1 - green, 2 - red */ + uint8_t pv[4]; + /* 0xrgb in mem is b g r a */ + uint32_t rgb; +} annepro2Led_t; + +#define ROWCOL2IDX(row, col) (NUM_COLUMN * (row) + (col)) +#define NUM_COLUMN 14 +#define NUM_ROW 5 +#define KEY_COUNT 70 + +/* Local copy of ledMask, used to override colors on the board */ +extern annepro2Led_t ledMask[KEY_COUNT]; + +/* Handle incoming messages */ +extern void ledCommandCallback(const message_t *msg); + +void annepro2SetIAP(void); +void annepro2LedDisable(void); +void annepro2LedEnable(void); +void annepro2LedSetProfile(uint8_t prof); +void annepro2LedGetStatus(void); +void annepro2LedNextProfile(void); +void annepro2LedPrevProfile(void); +void annepro2LedNextIntensity(void); +void annepro2LedNextAnimationSpeed(void); +void annepro2LedForwardKeypress(uint8_t row, uint8_t col); + +/* Set single key to a given color; alpha controls which is displayed */ +void annepro2LedMaskSetKey(uint8_t row, uint8_t col, annepro2Led_t color); +/* Push a whole local row to the shine */ +void annepro2LedMaskSetRow(uint8_t row); +/* Synchronize all rows */ +void annepro2LedMaskSetAll(void); + +/* Set all keys to a given color */ +void annepro2LedMaskSetMono(annepro2Led_t color); + +/* Blink given key `count` times by masking it with a `color`. Blink takes `hundredths` of a second */ +void annepro2LedBlink(uint8_t row, uint8_t col, annepro2Led_t color, uint8_t count, uint8_t hundredths); + +/* Kept for compatibility, but implemented using masks */ +void annepro2LedSetForegroundColor(uint8_t red, uint8_t green, uint8_t blue); +void annepro2LedResetForegroundColor(void); + +typedef struct { + uint8_t amountOfProfiles; + uint8_t currentProfile; + uint8_t matrixEnabled; + uint8_t isReactive; + uint8_t ledIntensity; + uint8_t errors; +} annepro2LedStatus_t; + +extern annepro2LedStatus_t annepro2LedStatus; diff --git a/keyboards/annepro2/boards/ANNEPRO2_C15/board.c b/keyboards/annepro2/boards/ANNEPRO2_C15/board.c new file mode 100644 index 0000000000..60c1826155 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C15/board.c @@ -0,0 +1,103 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* ============ Private Defines ===================== */ + +/* ============ Function Prototypes ================== */ + +#define PBIT(PORT, LINE) ((PAL_PORT(LINE) == PORT) ? (1 << PAL_PAD(LINE)) : 0) +#define PAFIO_L(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) < 8)) ? (AF << (PAL_PAD(LINE) << 2)) : 0) +#define PAFIO_H(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) >= 8)) ? (AF << ((PAL_PAD(LINE) - 8) << 2)) : 0) +#define PAFIO(PORT, N, LINE, AF) ((N) ? PAFIO_H(PORT, LINE, AF) : PAFIO_L(PORT, LINE, AF)) + +#define OUT_BITS(PORT) (PBIT(PORT, C2) | PBIT(PORT, C1) | PBIT(PORT, B5) | PBIT(PORT, B4) | PBIT(PORT, C3) | 0) + +#define IN_BITS(PORT) (PBIT(PORT, C4) | PBIT(PORT, C5) | PBIT(PORT, B10) | PBIT(PORT, B11) | PBIT(PORT, C0) | PBIT(PORT, A15) | PBIT(PORT, A8) | PBIT(PORT, A10) | PBIT(PORT, A11) | PBIT(PORT, A12) | PBIT(PORT, A13) | PBIT(PORT, A14) | PBIT(PORT, B2) | PBIT(PORT, B3) | 0) + +// Alternate Functions +#define AF_BITS(PORT, N) (PAFIO(PORT, N, LINE_UART_RX, AFIO_USART) | PAFIO(PORT, N, LINE_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_RX, AFIO_USART) | PAFIO(PORT, N, C2, AFIO_GPIO) | PAFIO(PORT, N, C1, AFIO_GPIO) | PAFIO(PORT, N, B5, AFIO_GPIO) | PAFIO(PORT, N, B4, AFIO_GPIO) | PAFIO(PORT, N, C3, AFIO_GPIO) | PAFIO(PORT, N, C4, AFIO_GPIO) | PAFIO(PORT, N, C5, AFIO_GPIO) | PAFIO(PORT, N, B10, AFIO_GPIO) | PAFIO(PORT, N, B11, AFIO_GPIO) | PAFIO(PORT, N, C0, AFIO_GPIO) | PAFIO(PORT, N, A15, AFIO_GPIO) | PAFIO(PORT, N, A8, AFIO_GPIO) | PAFIO(PORT, N, A10, AFIO_GPIO) | PAFIO(PORT, N, A11, AFIO_GPIO) | PAFIO(PORT, N, A12, AFIO_GPIO) | PAFIO(PORT, N, A13, AFIO_GPIO) | PAFIO(PORT, N, A14, AFIO_GPIO) | PAFIO(PORT, N, B2, AFIO_GPIO) | PAFIO(PORT, N, B3, AFIO_GPIO) | 0) + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { + // GPIO A + .setup[0] = + { + .DIR = OUT_BITS(IOPORTA), + .INE = IN_BITS(IOPORTA), + .PU = IN_BITS(IOPORTA), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTA, 0), + .CFG[1] = AF_BITS(IOPORTA, 1), + }, + // GPIO B + .setup[1] = + { + .DIR = OUT_BITS(IOPORTB), + .INE = IN_BITS(IOPORTB), + .PU = IN_BITS(IOPORTB), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTB, 0), + .CFG[1] = AF_BITS(IOPORTB, 1), + }, + // GPIO C + .setup[2] = + { + .DIR = OUT_BITS(IOPORTC), + .INE = IN_BITS(IOPORTC), + .PU = IN_BITS(IOPORTC), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTC, 0), + .CFG[1] = AF_BITS(IOPORTC, 1), + }, + // GPIO D + .setup[3] = + { + .DIR = OUT_BITS(IOPORTD), + .INE = IN_BITS(IOPORTD), + .PU = IN_BITS(IOPORTD), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTD, 0), + .CFG[1] = AF_BITS(IOPORTD, 1), + }, + .ESSR[0] = 0x00000000, + .ESSR[1] = 0x00000000, +}; + +void __early_init(void) { ht32_clock_init(); } + +void boardInit(void) {} diff --git a/keyboards/annepro2/boards/ANNEPRO2_C15/board.h b/keyboards/annepro2/boards/ANNEPRO2_C15/board.h new file mode 100644 index 0000000000..0a044ea181 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C15/board.h @@ -0,0 +1,39 @@ +/* + ChibiOS - Copyright (C) 2020 Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once +/* + * Setup for Anne Pro 2 board. + */ + +/* + * Board identifier. + */ +#define BOARD_NAME "Anne Pro 2" + +#define HT32F52342 + +#define FLASH_SIZE (0x10000 - 0x4000) // 64kB - 16kB + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif +void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ \ No newline at end of file diff --git a/keyboards/annepro2/boards/ANNEPRO2_C15/board.mk b/keyboards/annepro2/boards/ANNEPRO2_C15/board.mk new file mode 100644 index 0000000000..f308892e7c --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C15/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/ANNEPRO2_C15/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/ANNEPRO2_C15 diff --git a/keyboards/annepro2/boards/ANNEPRO2_C18/board.c b/keyboards/annepro2/boards/ANNEPRO2_C18/board.c new file mode 100644 index 0000000000..42c03d3d00 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C18/board.c @@ -0,0 +1,103 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* ============ Private Defines ===================== */ + +/* ============ Function Prototypes ================== */ + +#define PBIT(PORT, LINE) ((PAL_PORT(LINE) == PORT) ? (1 << PAL_PAD(LINE)) : 0) +#define PAFIO_L(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) < 8)) ? (AF << (PAL_PAD(LINE) << 2)) : 0) +#define PAFIO_H(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) >= 8)) ? (AF << ((PAL_PAD(LINE) - 8) << 2)) : 0) +#define PAFIO(PORT, N, LINE, AF) ((N) ? PAFIO_H(PORT, LINE, AF) : PAFIO_L(PORT, LINE, AF)) + +#define OUT_BITS(PORT) (PBIT(PORT, B5) | PBIT(PORT, B4) | PBIT(PORT, B3) | PBIT(PORT, B2) | PBIT(PORT, D1) | 0) + +#define IN_BITS(PORT) (PBIT(PORT, C4) | PBIT(PORT, C5) | PBIT(PORT, D0) | PBIT(PORT, B15) | PBIT(PORT, C11) | PBIT(PORT, A15) | PBIT(PORT, C12) | PBIT(PORT, C13) | PBIT(PORT, A8) | PBIT(PORT, A10) | PBIT(PORT, A11) | PBIT(PORT, A14) | PBIT(PORT, D2) | PBIT(PORT, D3) | 0) + +// Alternate Functions +#define AF_BITS(PORT, N) (PAFIO(PORT, N, LINE_UART_RX, AFIO_USART) | PAFIO(PORT, N, LINE_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_RX, AFIO_USART) | PAFIO(PORT, N, B5, AFIO_GPIO) | PAFIO(PORT, N, B4, AFIO_GPIO) | PAFIO(PORT, N, B3, AFIO_GPIO) | PAFIO(PORT, N, B2, AFIO_GPIO) | PAFIO(PORT, N, D1, AFIO_GPIO) | PAFIO(PORT, N, C4, AFIO_GPIO) | PAFIO(PORT, N, C5, AFIO_GPIO) | PAFIO(PORT, N, D0, AFIO_GPIO) | PAFIO(PORT, N, B15, AFIO_GPIO) | PAFIO(PORT, N, C11, AFIO_GPIO) | PAFIO(PORT, N, A15, AFIO_GPIO) | PAFIO(PORT, N, C12, AFIO_GPIO) | PAFIO(PORT, N, C13, AFIO_GPIO) | PAFIO(PORT, N, A8, AFIO_GPIO) | PAFIO(PORT, N, A10, AFIO_GPIO) | PAFIO(PORT, N, A11, AFIO_GPIO) | PAFIO(PORT, N, A14, AFIO_GPIO) | PAFIO(PORT, N, D2, AFIO_GPIO) | PAFIO(PORT, N, D3, AFIO_GPIO) | 0) + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { + // GPIO A + .setup[0] = + { + .DIR = OUT_BITS(IOPORTA), + .INE = IN_BITS(IOPORTA), + .PU = IN_BITS(IOPORTA), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTA, 0), + .CFG[1] = AF_BITS(IOPORTA, 1), + }, + // GPIO B + .setup[1] = + { + .DIR = OUT_BITS(IOPORTB), + .INE = IN_BITS(IOPORTB), + .PU = IN_BITS(IOPORTB), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTB, 0), + .CFG[1] = AF_BITS(IOPORTB, 1), + }, + // GPIO C + .setup[2] = + { + .DIR = OUT_BITS(IOPORTC), + .INE = IN_BITS(IOPORTC), + .PU = IN_BITS(IOPORTC), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTC, 0), + .CFG[1] = AF_BITS(IOPORTC, 1), + }, + // GPIO D + .setup[3] = + { + .DIR = OUT_BITS(IOPORTD), + .INE = IN_BITS(IOPORTD), + .PU = IN_BITS(IOPORTD), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTD, 0), + .CFG[1] = AF_BITS(IOPORTD, 1), + }, + .ESSR[0] = 0x00000000, + .ESSR[1] = 0x00000000, +}; + +void __early_init(void) { ht32_clock_init(); } + +void boardInit(void) {} diff --git a/keyboards/annepro2/boards/ANNEPRO2_C18/board.h b/keyboards/annepro2/boards/ANNEPRO2_C18/board.h new file mode 100644 index 0000000000..7345b24231 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C18/board.h @@ -0,0 +1,39 @@ +/* + ChibiOS - Copyright (C) 2020 Codetector + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once +/* + * Setup for Anne Pro 2 board. + */ + +/* + * Board identifier. + */ +#define BOARD_NAME "Anne Pro 2" + +#define HT32F52342 + +#define FLASH_SIZE (0x10000 - 0x4000) // 64kB - 16kB + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif +void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ diff --git a/keyboards/annepro2/boards/ANNEPRO2_C18/board.mk b/keyboards/annepro2/boards/ANNEPRO2_C18/board.mk new file mode 100644 index 0000000000..1b41dede85 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C18/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/ANNEPRO2_C18/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/ANNEPRO2_C18 diff --git a/keyboards/annepro2/c15/config.h b/keyboards/annepro2/c15/config.h new file mode 100644 index 0000000000..f28a6a1b53 --- /dev/null +++ b/keyboards/annepro2/c15/config.h @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2018 Charlie Waters + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "pin_defs.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xfeed +#define PRODUCT_ID 0xac15 +#define DEVICE_VER 0x1337 +#define MANUFACTURER Obins +#define PRODUCT Anne Pro 2 QMK +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 +// layer size: MATRIX_ROWS * MATRIX_COLS * sizeof(uint16_t) = 140 bytes + +#define LINE_UART_TX B0 // Master TX, LED RX +#define LINE_UART_RX B1 // Master RX, LED TX + +#define LINE_BT_UART_TX A4 // Master TX, BLE RX +#define LINE_BT_UART_RX A5 // Master RX, BLE TX + +// outputs (rows are pulled low) +#define MATRIX_ROW_PINS \ + { C2, C1, B5, B4, C3 } + +// inputs (columns are sampled) +// PORTA 12,13 conflict with SWD + +#define MATRIX_COL_PINS \ + { C4, C5, B10, B11, C0, A15, A8, A10, A11, A12, A13, A14, B2, B3 } diff --git a/keyboards/annepro2/c15/readme.md b/keyboards/annepro2/c15/readme.md new file mode 100644 index 0000000000..5fadb73909 --- /dev/null +++ b/keyboards/annepro2/c15/readme.md @@ -0,0 +1 @@ +AnnePro2, ANSI C15 version. diff --git a/keyboards/annepro2/c15/rules.mk b/keyboards/annepro2/c15/rules.mk new file mode 100644 index 0000000000..554ddc28ce --- /dev/null +++ b/keyboards/annepro2/c15/rules.mk @@ -0,0 +1,37 @@ +# Anne Pro 2 +SRC = \ + matrix.c \ + annepro2_ble.c \ + ap2_led.c \ + protocol.c + +# MCU +MCU = cortex-m0plus +ARMV = 6 +USE_FPU = no +MCU_FAMILY = HT32 +MCU_SERIES = HT32F523xx +MCU_LDSCRIPT = HT32F52342_ANNEPRO2 +MCU_STARTUP = ht32f523xx + +BOARD = ANNEPRO2_C15 + +# Options + +# Keys +CUSTOM_MATRIX = lite +NKRO_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +KEY_LOCK_ENABLE = no + +# Other featues +BOOTMAGIC_ENABLE = no +CONSOLE_ENABLE = no +COMMAND_ENABLE = no +RAW_ENABLE = no +MIDI_ENABLE = no +VIRTSER_ENABLE = no +COMBO_ENABLE = no +BOOTLOADER = custom +PROGRAM_CMD = annepro2_tools --boot $(BUILD_DIR)/$(TARGET).bin diff --git a/keyboards/annepro2/c18/config.h b/keyboards/annepro2/c18/config.h new file mode 100644 index 0000000000..f610ef76e4 --- /dev/null +++ b/keyboards/annepro2/c18/config.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2018 Charlie Waters + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "pin_defs.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xfeed +#define PRODUCT_ID 0xac18 +#define DEVICE_VER 0x1337 +#define MANUFACTURER Obins +#define PRODUCT Anne Pro 2(c18)QMK +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 +// layer size: MATRIX_ROWS * MATRIX_COLS * sizeof(uint16_t) = 140 bytes + +#define LINE_UART_TX B0 +#define LINE_UART_RX B1 + +#define LINE_BT_UART_TX A4 // Master TX, BLE RX +#define LINE_BT_UART_RX A5 // Master RX, BLE TX + +// outputs (rows are pulled low) +#define MATRIX_ROW_PINS \ + { B5, B4, B3, B2, D1 } + +// inputs (columns are sampled) +#define MATRIX_COL_PINS \ + { C4, C5, D0, B15, C11, A15, C12, C13, A8, A10, A11, A14, D2, D3 } diff --git a/keyboards/annepro2/c18/readme.md b/keyboards/annepro2/c18/readme.md new file mode 100644 index 0000000000..f2e2fc45b8 --- /dev/null +++ b/keyboards/annepro2/c18/readme.md @@ -0,0 +1 @@ +AnnePro2, ANSI C18 version. diff --git a/keyboards/annepro2/c18/rules.mk b/keyboards/annepro2/c18/rules.mk new file mode 100644 index 0000000000..b2e16cc35f --- /dev/null +++ b/keyboards/annepro2/c18/rules.mk @@ -0,0 +1,37 @@ +# Anne Pro 2 +SRC = \ + matrix.c \ + annepro2_ble.c \ + ap2_led.c \ + protocol.c + +# MCU +MCU = cortex-m0plus +ARMV = 6 +USE_FPU = no +MCU_FAMILY = HT32 +MCU_SERIES = HT32F523xx +MCU_LDSCRIPT = HT32F52342_ANNEPRO2 +MCU_STARTUP = ht32f523xx + +BOARD = ANNEPRO2_C18 + +# Options + +# Keys +CUSTOM_MATRIX = lite +NKRO_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +KEY_LOCK_ENABLE = no + +# Other featues +BOOTMAGIC_ENABLE = yes +CONSOLE_ENABLE = no +COMMAND_ENABLE = no +RAW_ENABLE = no +MIDI_ENABLE = no +VIRTSER_ENABLE = no +COMBO_ENABLE = no +BOOTLOADER = custom +PROGRAM_CMD = annepro2_tools --boot $(BUILD_DIR)/$(TARGET).bin diff --git a/keyboards/annepro2/chconf.h b/keyboards/annepro2/chconf.h new file mode 100644 index 0000000000..51fe38cf27 --- /dev/null +++ b/keyboards/annepro2/chconf.h @@ -0,0 +1,31 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/annepro2/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 1000 + +#define CH_CFG_ST_TIMEDELTA 0 + +#define CH_CFG_TIME_QUANTUM 20 + + +#include_next \ No newline at end of file diff --git a/keyboards/annepro2/halconf.h b/keyboards/annepro2/halconf.h new file mode 100644 index 0000000000..686b91a7fb --- /dev/null +++ b/keyboards/annepro2/halconf.h @@ -0,0 +1,28 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/annepro2/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_SERIAL TRUE + +#define SERIAL_USB_BUFFERS_SIZE 256 + +#include_next diff --git a/keyboards/annepro2/info.json b/keyboards/annepro2/info.json new file mode 100644 index 0000000000..8fd515bd10 --- /dev/null +++ b/keyboards/annepro2/info.json @@ -0,0 +1,330 @@ +{ + "keyboard_name": "Anne Pro 2", + "url": "https://openannepro.github.io/", + "maintainer": "community", + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "~", + "x": 0, + "y": 0 + }, + { + "label": "!", + "x": 1, + "y": 0 + }, + { + "label": "@", + "x": 2, + "y": 0 + }, + { + "label": "#", + "x": 3, + "y": 0 + }, + { + "label": "$", + "x": 4, + "y": 0 + }, + { + "label": "%", + "x": 5, + "y": 0 + }, + { + "label": "^", + "x": 6, + "y": 0 + }, + { + "label": "&", + "x": 7, + "y": 0 + }, + { + "label": "*", + "x": 8, + "y": 0 + }, + { + "label": "(", + "x": 9, + "y": 0 + }, + { + "label": ")", + "x": 10, + "y": 0 + }, + { + "label": "_", + "x": 11, + "y": 0 + }, + { + "label": "+", + "x": 12, + "y": 0 + }, + { + "label": "Backspace", + "x": 13, + "y": 0, + "w": 2 + }, + { + "label": "Tab", + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "label": "Q", + "x": 1.5, + "y": 1 + }, + { + "label": "W", + "x": 2.5, + "y": 1 + }, + { + "label": "E", + "x": 3.5, + "y": 1 + }, + { + "label": "R", + "x": 4.5, + "y": 1 + }, + { + "label": "T", + "x": 5.5, + "y": 1 + }, + { + "label": "Y", + "x": 6.5, + "y": 1 + }, + { + "label": "U", + "x": 7.5, + "y": 1 + }, + { + "label": "I", + "x": 8.5, + "y": 1 + }, + { + "label": "O", + "x": 9.5, + "y": 1 + }, + { + "label": "P", + "x": 10.5, + "y": 1 + }, + { + "label": "{", + "x": 11.5, + "y": 1 + }, + { + "label": "}", + "x": 12.5, + "y": 1 + }, + { + "label": "|", + "x": 13.5, + "y": 1, + "w": 1.5 + }, + { + "label": "Caps Lock", + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "label": "A", + "x": 1.75, + "y": 2 + }, + { + "label": "S", + "x": 2.75, + "y": 2 + }, + { + "label": "D", + "x": 3.75, + "y": 2 + }, + { + "label": "F", + "x": 4.75, + "y": 2 + }, + { + "label": "G", + "x": 5.75, + "y": 2 + }, + { + "label": "H", + "x": 6.75, + "y": 2 + }, + { + "label": "J", + "x": 7.75, + "y": 2 + }, + { + "label": "K", + "x": 8.75, + "y": 2 + }, + { + "label": "L", + "x": 9.75, + "y": 2 + }, + { + "label": ":", + "x": 10.75, + "y": 2 + }, + { + "label": "\"", + "x": 11.75, + "y": 2 + }, + { + "label": "Enter", + "x": 12.75, + "y": 2, + "w": 2.25 + }, + { + "label": "Shift", + "x": 0, + "y": 3, + "w": 2.25 + }, + { + "label": "Z", + "x": 2.25, + "y": 3 + }, + { + "label": "X", + "x": 3.25, + "y": 3 + }, + { + "label": "C", + "x": 4.25, + "y": 3 + }, + { + "label": "V", + "x": 5.25, + "y": 3 + }, + { + "label": "B", + "x": 6.25, + "y": 3 + }, + { + "label": "N", + "x": 7.25, + "y": 3 + }, + { + "label": "M", + "x": 8.25, + "y": 3 + }, + { + "label": "<", + "x": 9.25, + "y": 3 + }, + { + "label": ">", + "x": 10.25, + "y": 3 + }, + { + "label": "?", + "x": 11.25, + "y": 3 + }, + { + "label": "Shift", + "x": 12.25, + "y": 3, + "w": 2.75 + }, + { + "label": "Ctrl", + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 1.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Alt", + "x": 2.5, + "y": 4, + "w": 1.25 + }, + { + "x": 3.75, + "y": 4, + "w": 6.25 + }, + { + "label": "Alt", + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Menu", + "x": 12.5, + "y": 4, + "w": 1.25 + }, + { + "label": "Ctrl", + "x": 13.75, + "y": 4, + "w": 1.25 + } + ] + } + } +} diff --git a/keyboards/annepro2/keymaps/default-full-caps/config.h b/keyboards/annepro2/keymaps/default-full-caps/config.h new file mode 100644 index 0000000000..413c5d8dc5 --- /dev/null +++ b/keyboards/annepro2/keymaps/default-full-caps/config.h @@ -0,0 +1,20 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// Obins stock firmware has something similar to this already enabled, but disabled by default in QMK +#define PERMISSIVE_HOLD diff --git a/keyboards/annepro2/keymaps/default-full-caps/keymap.c b/keyboards/annepro2/keymaps/default-full-caps/keymap.c new file mode 100644 index 0000000000..8ac9211ac4 --- /dev/null +++ b/keyboards/annepro2/keymaps/default-full-caps/keymap.c @@ -0,0 +1,120 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum anne_pro_layers { + _BASE_LAYER, + _FN1_LAYER, + _FN2_LAYER, +}; + +// clang-format off + +// Key symbols are based on QMK. Use them to remap your keyboard +/* +* Layer _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | +* |-----------------------------------------------------------------------------------------+ +* | Tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | +* |-----------------------------------------------------------------------------------------+ +* | Caps | a | s | d | f | g | h | j | k | l | ; | ' | Enter | +* |-----------------------------------------------------------------------------------------+ +* | Shift | z | x | c | v | b | n | m | , | . | / | Shift | +* |-----------------------------------------------------------------------------------------+ +* | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | +* \-----------------------------------------------------------------------------------------/ +* Layer TAP in _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | UP | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | LEFT | DOWN | RIGHT | +* \-----------------------------------------------------------------------------------------/ +*/ + const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE_LAYER] = LAYOUT( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + LT(_FN1_LAYER,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_UP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, LT(_FN1_LAYER,KC_LEFT), LT(_FN2_LAYER,KC_DOWN), RCTL_T(KC_RGHT) +), + /* + * Layer _FN1_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DELETE | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift |V-UP |V-DWN|MUTE | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN1_LAYER] = LAYOUT( /* Base */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN2_LAYER), KC_TRNS +), + /* + * Layer _FN2_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ~ | BT1 | BT2 | BT3 | BT4 | F5 | F6 | F7 |LEDOF|LEDON| F10 | F11 | F12 | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | z | x | c | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN2_LAYER] = LAYOUT( /* Base */ + KC_TRNS, KC_AP2_BT1, KC_AP2_BT2, KC_AP2_BT3, KC_AP2_BT4, KC_TRNS, KC_TRNS, KC_TRNS, KC_AP_LED_OFF, KC_AP_LED_ON, KC_AP_LED_NEXT_INTENSITY, KC_AP_LED_SPEED, KC_TRNS, KC_TRNS, + MO(_FN2_LAYER), KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN1_LAYER), MO(_FN2_LAYER), KC_TRNS + ), +}; + +// clang-format on + +// The function to handle the caps lock logic +bool led_update_user(led_t leds) { + if (leds.caps_lock) { + // Set the leds to red + annepro2LedSetForegroundColor(0xFF, 0x00, 0x00); + } else { + annepro2LedResetForegroundColor(); + } + + return true; +} diff --git a/keyboards/annepro2/keymaps/default-layer-indicators/config.h b/keyboards/annepro2/keymaps/default-layer-indicators/config.h new file mode 100644 index 0000000000..413c5d8dc5 --- /dev/null +++ b/keyboards/annepro2/keymaps/default-layer-indicators/config.h @@ -0,0 +1,20 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// Obins stock firmware has something similar to this already enabled, but disabled by default in QMK +#define PERMISSIVE_HOLD diff --git a/keyboards/annepro2/keymaps/default-layer-indicators/keymap.c b/keyboards/annepro2/keymaps/default-layer-indicators/keymap.c new file mode 100644 index 0000000000..ac2b421d06 --- /dev/null +++ b/keyboards/annepro2/keymaps/default-layer-indicators/keymap.c @@ -0,0 +1,147 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum anne_pro_layers { + _BASE_LAYER, + _FN1_LAYER, + _FN2_LAYER, +}; + +// clang-format off + +// Key symbols are based on QMK. Use them to remap your keyboard +/* +* Layer _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | +* |-----------------------------------------------------------------------------------------+ +* | Tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | +* |-----------------------------------------------------------------------------------------+ +* | Caps | a | s | d | f | g | h | j | k | l | ; | ' | Enter | +* |-----------------------------------------------------------------------------------------+ +* | Shift | z | x | c | v | b | n | m | , | . | / | Shift | +* |-----------------------------------------------------------------------------------------+ +* | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | +* \-----------------------------------------------------------------------------------------/ +* Layer TAP in _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | UP | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | LEFT | DOWN | RIGHT | +* \-----------------------------------------------------------------------------------------/ +*/ + const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE_LAYER] = LAYOUT( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + LT(_FN1_LAYER,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_UP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, LT(_FN1_LAYER,KC_LEFT), LT(_FN2_LAYER,KC_DOWN), RCTL_T(KC_RGHT) +), + /* + * Layer _FN1_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DELETE | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift |V-UP |V-DWN|MUTE | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN1_LAYER] = LAYOUT( /* Base */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN2_LAYER), KC_TRNS +), + /* + * Layer _FN2_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ~ | BT1 | BT2 | BT3 | BT4 | F5 | F6 | F7 |LEDOF|LEDON| F10 | F11 | F12 | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | z | x | c | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN2_LAYER] = LAYOUT( /* Base */ + KC_TRNS, KC_AP2_BT1, KC_AP2_BT2, KC_AP2_BT3, KC_AP2_BT4, KC_TRNS, KC_TRNS, KC_TRNS, KC_AP_LED_OFF, KC_AP_LED_ON, KC_AP_LED_NEXT_INTENSITY, KC_AP_LED_SPEED, KC_TRNS, KC_TRNS, + MO(_FN2_LAYER), KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN1_LAYER), MO(_FN2_LAYER), KC_TRNS + ), +}; + +// clang-format on + +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _FN1_LAYER: + // Set the leds to green + annepro2LedSetForegroundColor(0x00, 0xFF, 0x00); + break; + case _FN2_LAYER: + // Set the leds to blue + annepro2LedSetForegroundColor(0x00, 0x00, 0xFF); + break; + default: + // Reset back to the current profile + annepro2LedResetForegroundColor(); + break; + } + return state; +} + +// The function to handle the caps lock logic +// It's called after the capslock changes state or after entering layers 1 and 2. +bool led_update_user(led_t leds) { + if (leds.caps_lock) { + // Set the caps-lock to red + const annepro2Led_t color = {.p.red = 0xff, .p.green = 0x00, .p.blue = 0x00, .p.alpha = 0xff}; + + annepro2LedMaskSetKey(2, 0, color); + /* NOTE: Instead of colouring the capslock only, you can change the whole + keyboard with annepro2LedSetForegroundColor */ + } else { + // Reset the capslock if there is no layer active + if (!layer_state_is(_FN1_LAYER) && !layer_state_is(_FN2_LAYER)) { + const annepro2Led_t color = {.p.red = 0xff, .p.green = 0x00, .p.blue = 0x00, .p.alpha = 0x00}; + annepro2LedMaskSetKey(2, 0, color); + } + } + + return true; +} diff --git a/keyboards/annepro2/keymaps/default/config.h b/keyboards/annepro2/keymaps/default/config.h new file mode 100644 index 0000000000..413c5d8dc5 --- /dev/null +++ b/keyboards/annepro2/keymaps/default/config.h @@ -0,0 +1,20 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// Obins stock firmware has something similar to this already enabled, but disabled by default in QMK +#define PERMISSIVE_HOLD diff --git a/keyboards/annepro2/keymaps/default/keymap.c b/keyboards/annepro2/keymaps/default/keymap.c new file mode 100644 index 0000000000..a984b05830 --- /dev/null +++ b/keyboards/annepro2/keymaps/default/keymap.c @@ -0,0 +1,106 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum anne_pro_layers { + _BASE_LAYER, + _FN1_LAYER, + _FN2_LAYER, +}; + +// clang-format off +// Key symbols are based on QMK. Use them to remap your keyboard +/* +* Layer _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | +* |-----------------------------------------------------------------------------------------+ +* | Tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | +* |-----------------------------------------------------------------------------------------+ +* | Caps | a | s | d | f | g | h | j | k | l | ; | ' | Enter | +* |-----------------------------------------------------------------------------------------+ +* | Shift | z | x | c | v | b | n | m | , | . | / | Shift | +* |-----------------------------------------------------------------------------------------+ +* | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | +* \-----------------------------------------------------------------------------------------/ +* Layer TAP in _BASE_LAYER +* ,-----------------------------------------------------------------------------------------. +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | | | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | | | | | | | UP | +* |-----------------------------------------------------------------------------------------+ +* | | | | | | LEFT | DOWN | RIGHT | +* \-----------------------------------------------------------------------------------------/ +*/ + const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE_LAYER] = LAYOUT( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + LT(_FN1_LAYER,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_UP), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, LT(_FN1_LAYER,KC_LEFT), LT(_FN2_LAYER,KC_DOWN), RCTL_T(KC_RGHT) +), + /* + * Layer _FN1_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DELETE | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift |V-UP |V-DWN|MUTE | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN1_LAYER] = LAYOUT( /* Base */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN2_LAYER), KC_TRNS +), + /* + * Layer _FN2_LAYER + * ,-----------------------------------------------------------------------------------------. + * | ~ | BT1 | BT2 | BT3 | BT4 | F5 | F6 | F7 |LEDOF|LEDON| F10 | F11 | F12 | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Tab | q | UP | e | r | t | y | u | i | o | PS | HOME | END | \ | + * |-----------------------------------------------------------------------------------------+ + * | Esc |LEFT |DOWN |RIGHT| f | g | h | j | k | l | PGUP|PGDN | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | z | x | c | v | b | n | m | , |INSRT| DEL | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | L1 | Alt | space | Alt | FN1 | FN2 | Ctrl | + * \-----------------------------------------------------------------------------------------/ + * + */ + [_FN2_LAYER] = LAYOUT( /* Base */ + KC_TRNS, KC_AP2_BT1, KC_AP2_BT2, KC_AP2_BT3, KC_AP2_BT4, KC_TRNS, KC_TRNS, KC_TRNS, KC_AP_LED_OFF, KC_AP_LED_ON, KC_AP_LED_NEXT_INTENSITY, KC_AP_LED_SPEED, KC_TRNS, KC_TRNS, + MO(_FN2_LAYER), KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FN1_LAYER), MO(_FN2_LAYER), KC_TRNS + ), +}; +// clang-format on diff --git a/keyboards/annepro2/ld/HT32F52342_ANNEPRO2.ld b/keyboards/annepro2/ld/HT32F52342_ANNEPRO2.ld new file mode 100644 index 0000000000..544400b948 --- /dev/null +++ b/keyboards/annepro2/ld/HT32F52342_ANNEPRO2.ld @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2013-2016 Fabio UJonathan A. Kollaschtzig, http://fabioutzig.com + * (c) 2020 Yaotian Feng (Codetector) + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * HT32F52342 w/ Anne Pro 2 bootloader memory setup. + */ +MEMORY { + flash0 : org = 0x00004000, len = 64k - 16k /* firmware */ + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 8k - 4 /* RAM */ + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/annepro2/matrix.c b/keyboards/annepro2/matrix.c new file mode 100644 index 0000000000..a1585e4ddf --- /dev/null +++ b/keyboards/annepro2/matrix.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2018 Charlie Waters + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include "timer.h" +#include "wait.h" +#include "print.h" +#include "matrix.h" +#include "annepro2.h" + +pin_t row_list[MATRIX_ROWS] = MATRIX_ROW_PINS; +pin_t col_list[MATRIX_COLS] = MATRIX_COL_PINS; + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool matrix_has_changed = false; + // cache of input ports for columns + static uint16_t port_cache[4]; + // scan each row + for (int row = 0; row < MATRIX_ROWS; row++) { + palClearLine(row_list[row]); + __NOP(); + __NOP(); + __NOP(); + __NOP(); + // read i/o ports + port_cache[0] = palReadPort(IOPORTA); + port_cache[1] = palReadPort(IOPORTB); + port_cache[2] = palReadPort(IOPORTC); + port_cache[3] = palReadPort(IOPORTD); + palSetLine(row_list[row]); + + // get columns from ports + matrix_row_t data = 0; + for (int col = 0; col < MATRIX_COLS; ++col) { + pin_t line = col_list[col]; + uint16_t port = port_cache[HT32_PAL_IDX(PAL_PORT(line))]; + data |= (((port & (1 << PAL_PAD(line))) ? 0 : 1) << col); + } + + if (current_matrix[row] != data) { + current_matrix[row] = data; + matrix_has_changed = true; + } + } + return matrix_has_changed; +} \ No newline at end of file diff --git a/keyboards/annepro2/mcuconf.h b/keyboards/annepro2/mcuconf.h new file mode 100644 index 0000000000..8265fe6eb9 --- /dev/null +++ b/keyboards/annepro2/mcuconf.h @@ -0,0 +1,62 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#pragma once + +#include "nvic.h" + +#define HT32F52342_MCUCONF + +/* + * HAL driver system settings. + */ + +/* + * Clock configuration. + */ + +// This configuration: +// 8 MHz HSE crystal +// PLL multiplies HSE to 48 MHz core and peripheral clock +// 48 MHz to UART +// 48 MHz to USB + +#define HT32_CK_HSE_FREQUENCY 8000000UL // 8 MHz +#define HT32_CKCU_SW CKCU_GCCR_SW_PLL +#define HT32_PLL_USE_HSE TRUE +#define HT32_PLL_FBDIV 6 // 8 MHz -> 48 MHz +#define HT32_PLL_OTDIV 0 +#define HT32_AHB_PRESCALER 1 // 48 MHz -> 48 MHz +#define HT32_USART_PRESCALER 1 // 48 MHz +#define HT32_USB_PRESCALER 1 // 48 MHz -> 48 MHz +// SysTick uses processor clock at 48MHz +#define HT32_ST_USE_HCLK TRUE + +/* + * Peripheral driver settings + */ + +#define HT32_SERIAL_USE_USART0 TRUE +#define HT32_USART0_IRQ_PRIORITY 6 + +#define HT32_SERIAL_USE_USART1 TRUE +#define HT32_USART1_IRQ_PRIORITY 7 + +/* + * USB driver settings + */ + +#define HT32_USB_USE_USB0 TRUE +#define HT32_USB_USB0_IRQ_PRIORITY 5 diff --git a/keyboards/annepro2/protocol.c b/keyboards/annepro2/protocol.c new file mode 100644 index 0000000000..171ac5c239 --- /dev/null +++ b/keyboards/annepro2/protocol.c @@ -0,0 +1,116 @@ +/* + * (c) 2021 by Tomasz bla Fortuna + * License: GPLv2 + * + * This file is shared with the Shine firmware. Keep it in sync (and in the + * shine's clang formatting). + * + * Implementation of a robust serial protocol which can handle single dropped + * characters during transit without locking. + * + * At 115200, transmitting the shortest message takes 0.043ms, at 9600 - 0.52ms. + * + */ + +#include "protocol.h" +#include "board.h" +#include "ch.h" +#include "hal.h" + +/* UART communication protocol state */ +protocol_t proto; + +void protoInit(protocol_t *proto, void (*callback)(const message_t *)) { + proto->previousId = 0; + proto->callback = callback; + proto->state = STATE_SYNC_1; + proto->errors = 0; +} + +static uint8_t msgId = 0; +void protoTx(uint8_t cmd, const unsigned char *buf, int payloadSize, int retries) { + chDbgCheck(payloadSize <= MAX_PAYLOAD_SIZE); + + const uint8_t header[5] = { + 0x7A, 0x1D, cmd, ++msgId, payloadSize, + }; + + /* We don't implement ACKs, yet some messages should not be lost. */ + for (int i = 0; i < retries; i++) { + sdWrite(&PROTOCOL_SD, header, sizeof(header)); + if (payloadSize) sdWrite(&PROTOCOL_SD, buf, payloadSize); + } +} + +static inline void messageReceived(protocol_t *proto) { + if (proto->buffer.msgId != proto->previousId) { + /* It's not a resend / duplicate */ + proto->callback(&proto->buffer); + proto->previousId = proto->buffer.msgId; + } + proto->state = STATE_SYNC_1; +} + +void protoConsume(protocol_t *proto, uint8_t byte) { + switch (proto->state) { + case STATE_SYNC_1: + if (byte == 0x7A) { + proto->state = STATE_SYNC_2; + } else { + proto->errors++; + } + return; + + case STATE_SYNC_2: + if (byte == 0x1D) { + proto->state = STATE_CMD; + } else { + proto->state = STATE_SYNC_1; + proto->errors++; + } + return; + + case STATE_CMD: + proto->buffer.command = byte; + proto->state = STATE_ID; + return; + + case STATE_ID: + proto->buffer.msgId = byte; + proto->state = STATE_PAYLOAD_SIZE; + return; + + case STATE_PAYLOAD_SIZE: + proto->buffer.payloadSize = byte; + if (proto->buffer.payloadSize > MAX_PAYLOAD_SIZE) { + proto->buffer.payloadSize = MAX_PAYLOAD_SIZE; + proto->errors++; + } + proto->payloadPosition = 0; + if (proto->buffer.payloadSize == 0) { + /* No payload - whole message received */ + messageReceived(proto); + } else { + proto->state = STATE_PAYLOAD; + } + return; + + case STATE_PAYLOAD: + /* NOTE: This could be read with sdReadTimeout probably, but that breaks + * abstraction */ + proto->buffer.payload[proto->payloadPosition] = byte; + proto->payloadPosition++; + if (proto->payloadPosition == proto->buffer.payloadSize) { + /* Payload read - message received */ + messageReceived(proto); + } + return; + } +} + +void protoSilence(protocol_t *proto) { + if (proto->state != STATE_SYNC_1) { + proto->state = STATE_SYNC_1; + proto->errors++; + } +} diff --git a/keyboards/annepro2/protocol.h b/keyboards/annepro2/protocol.h new file mode 100644 index 0000000000..d1a05683c8 --- /dev/null +++ b/keyboards/annepro2/protocol.h @@ -0,0 +1,111 @@ +/* + * (c) 2021 by Tomasz bla Fortuna + * License: GPLv2 + * + * This file is shared with the Shine firmware. Keep it in sync (and in the + * shine's clang formatting). + */ + +#pragma once +#include + +#define PROTOCOL_SD SD0 + +enum { + /* + * Main -> LED + */ + /* Basic config */ + CMD_LED_ON = 0x01, + CMD_LED_OFF = 0x02, + + CMD_LED_SET_PROFILE = 0x03, + CMD_LED_NEXT_PROFILE = 0x04, + CMD_LED_PREV_PROFILE = 0x05, + + CMD_LED_NEXT_INTENSITY = 0x06, + CMD_LED_NEXT_ANIMATION_SPEED = 0x07, + + /* Masks */ + /* Override a key color, eg. capslock */ + CMD_LED_MASK_SET_KEY = 0x10, + /* Override all keys in a row with configurable colors */ + CMD_LED_MASK_SET_ROW = 0x11, + + /* Override all keys with single color (eg. foreground color) */ + CMD_LED_MASK_SET_MONO = 0x12, + + /* Reactive / status */ + CMD_LED_GET_STATUS = 0x20, + CMD_LED_KEY_BLINK = 0x21, + CMD_LED_KEY_DOWN = 0x22, + CMD_LED_KEY_UP = 0x23, /* TODO */ + CMD_LED_IAP = 0x24, + + /* LED -> Main */ + /* Payload with data to send over HID */ + CMD_LED_DEBUG = 0x40, + + /* Number of profiles, current profile, on/off state, + reactive flag, brightness, errors */ + CMD_LED_STATUS = 0x41, +}; + +/* 1 ROW * 14 COLS * 4B (RGBX) = 56 + header prefix. */ +#define MAX_PAYLOAD_SIZE 64 + +/** Enum of the states used for the serial protocol finite-state automaton */ +enum protoState { + /* 2-byte initial start-of-message sync */ + STATE_SYNC_1, + STATE_SYNC_2, + /* Waiting for command byte */ + STATE_CMD, + /* Waiting for ID byte */ + STATE_ID, + /* Waiting for payload size */ + STATE_PAYLOAD_SIZE, + /* Reading payload until payloadPosition == payloadSize */ + STATE_PAYLOAD, +}; + +/* Buffer holding a single message */ +typedef struct { + uint8_t command; + uint8_t msgId; + uint8_t payloadSize; + uint8_t payload[MAX_PAYLOAD_SIZE]; +} message_t; + +/* Internal protocol state */ +typedef struct { + /* Callback to call upon receiving a valid message */ + void (*callback)(const message_t *); + + /* Number of read payload bytes */ + uint8_t payloadPosition; + + /* Current finite-state-automata state */ + enum protoState state; + + uint8_t previousId; + uint8_t errors; + + /* Currently received message */ + message_t buffer; +} protocol_t; + +/* NOTE: This didn't work when defined on stack */ +extern protocol_t proto; + +/* Init state */ +extern void protoInit(protocol_t *proto, void (*callback)(const message_t *)); + +/* Consume one byte and push state forward - might call the callback */ +extern void protoConsume(protocol_t *proto, uint8_t byte); + +/* Prolonged silence - reset state */ +extern void protoSilence(protocol_t *proto); + +/* Transmit message */ +extern void protoTx(uint8_t cmd, const unsigned char *buf, int payloadSize, int retries); diff --git a/keyboards/annepro2/readme.md b/keyboards/annepro2/readme.md new file mode 100644 index 0000000000..e3e0b95be4 --- /dev/null +++ b/keyboards/annepro2/readme.md @@ -0,0 +1,50 @@ +# Anne Pro 2 rev. C15 and C18 QMK firmware + +## Introduction + +This is the QMK firmware repository for the Anne Pro 2 rev. C15 and C18 keyboard. + +## Layouts + +Keyboard has 60% ANSI standard layout. + +## How to compile + +After setting up your build environment, you can compile the Anne Pro 2 C18 default keymap by using: + + make annepro2/c18:default + +If you want to compile the Anne Pro 2 C15 default keymap use: + + make annepro2/c15:default + +## Installing + +### Get AnnePro2 Tools + +If you want the executable instead of compiling it yourself, [download it here](https://ci.codetector.org/job/OpenAnnePro/job/AnnePro2-Tools/job/master/). +Windows and Linux versions are available. Otherwise, follow the steps below: + +0. Install the latest stable `rust` toolchain using [rustup](https://rustup.rs/) +0. Also install [Visual Studio Community edition](https://visualstudio.microsoft.com/downloads/) +including the C/C++ module to prevent errors while compiling +0. Download or Clone the [AnnePro2-Tools](https://github.com/OpenAnnePro/AnnePro2-Tools) project. +0. Compile the tool using +```bash +cargo build --release +``` +0. The compiled tool should be in `./target/release/annepro2_tools` (In later I will refer to this as `annepro2_tools`) + +### Flashing the firmware +0. Put the keyboard into DFU/IAP mode by unplugging the keyboard, then holding ESC while plugging it back in. +0. Run annepro2_tools with the firmware you just built. + +**Please substitute with the correct paths and correct bin file if you chose another keymap profile** +```bash +annepro2_tools annepro2_c15_default.bin +``` + +If the tool can't find the keyboard please double check you have the keyboard in IAP mode. + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file