1
0
Fork 0

[Keyboard] Adding LED support to the plaid default keycap (#6109)

* Adding led support for Plaid

* Adding led support for Plaid
This commit is contained in:
brickbots 2019-06-11 09:01:59 -07:00 committed by Drashna Jaelre
parent d0c29f25c9
commit 8c22d641ee
3 changed files with 226 additions and 4 deletions

View file

@ -33,12 +33,44 @@ enum plaid_keycodes {
COLEMAK,
DVORAK,
PLOVER,
EXT_PLV
EXT_PLV,
LED_1,
LED_2,
LED_3,
LED_4,
LED_5,
LED_6,
LED_7,
LED_8,
LED_9,
LED_0
};
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
// array of keys considered modifiers for led purposes
const uint16_t modifiers[] = {
KC_LCTL,
KC_RCTL,
KC_LALT,
KC_RALT,
KC_LSFT,
KC_RSFT,
KC_LGUI,
KC_RGUI,
LOWER,
RAISE
};
//Setup consts for LED modes
#define LEDMODE_ON 1 //always on
#define LEDMODE_OFF 0 //always off
#define LEDMODE_MODS 2 //On with modifiers
#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress
#define LEDMODE_KEY 4 //On with any keypress, off with key release
#define LEDMODE_ENTER 5 // On with enter key
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
@ -152,7 +184,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |Reset | | | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
* |------+------+------+------+------+------|------+------+------+------+------+------|
@ -162,7 +194,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT_plaid_grid(
_______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL ,
RESET,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL ,
_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______,
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
@ -171,11 +203,100 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
};
//Setup config struct for LED
typedef union {
uint32_t raw;
struct {
uint8_t red_mode :8;
uint8_t green_mode :8;
};
} led_config_t;
led_config_t led_config;
//Set leds to saved state during powerup
void keyboard_post_init_user(void) {
// Call the post init code.
led_config.raw = eeconfig_read_user();
if(led_config.red_mode == LEDMODE_ON) {
writePinHigh(LED_RED);
}
if(led_config.green_mode == LEDMODE_ON) {
writePinHigh(LED_GREEN);
}
}
void eeconfig_init_user(void) { // EEPROM is getting reset!
led_config.raw = 0;
led_config.red_mode = LEDMODE_ON;
led_config.green_mode = LEDMODE_MODS;
eeconfig_update_user(led_config.raw);
eeconfig_update_user(led_config.raw);
}
uint32_t layer_state_set_user(uint32_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) {
switch (led_mode) {
case LEDMODE_MODS:
for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) {
if(keycode==modifiers[i]) {
if (record->event.pressed) {
writePinHigh(led);
}
else {
writePinLow(led);
}
}
}
break;
case LEDMODE_BLINKIN:
if (record->event.pressed) {
if(rand() % 2 == 1) {
if(rand() % 2 == 0) {
writePinLow(led);
}
else {
writePinHigh(led);
}
}
}
break;
case LEDMODE_KEY:
if (record->event.pressed) {
writePinHigh(led);
return;
}
else {
writePinLow(led);
return;
}
break;
case LEDMODE_ENTER:
if (keycode==KC_ENT) {
writePinHigh(led);
}
else {
writePinLow(led);
}
break;
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
/* If the either led mode is keypressed based, call the led updater
then let it fall through the keypress handlers. Just to keep
the logic out of this procedure */
if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) {
led_keypress_update(LED_RED, led_config.red_mode, keycode, record);
}
if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) {
led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record);
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
@ -217,6 +338,74 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return false;
break;
case LED_1:
if (record->event.pressed) {
if (led_config.red_mode==LEDMODE_ON) {
led_config.red_mode=LEDMODE_OFF;
writePinLow(LED_RED);
}
else {
led_config.red_mode=LEDMODE_ON;
writePinHigh(LED_RED);
}
}
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_2:
if (record->event.pressed) {
if (led_config.green_mode==LEDMODE_ON) {
led_config.green_mode=LEDMODE_OFF;
writePinLow(LED_GREEN);
}
else {
led_config.green_mode=LEDMODE_ON;
writePinHigh(LED_GREEN);
}
}
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_3:
led_config.red_mode=LEDMODE_MODS;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_4:
led_config.green_mode=LEDMODE_MODS;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_5:
led_config.red_mode=LEDMODE_BLINKIN;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_6:
led_config.green_mode=LEDMODE_BLINKIN;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_7:
led_config.red_mode=LEDMODE_KEY;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_8:
led_config.green_mode=LEDMODE_KEY;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_9:
led_config.red_mode=LEDMODE_ENTER;
eeconfig_update_user(led_config.raw);
return false;
break;
case LED_0:
led_config.green_mode=LEDMODE_ENTER;
eeconfig_update_user(led_config.raw);
return false;
break;
}
return true;
}

View file

@ -1,2 +1,32 @@
# The default keymap for plaid
folk from planck
Original copyright 2019 Takuya Urakawa (dm9records.com)
LED Support added by Richard Sutherland (rich@brickbots.com)
This layout is based on the Planck layout, and includes an adjust layer (6)
accessible by holding the lower and raise modifiers (MO3 and MO4) together.
The adjustment layer is used to set the behavior of the two LEDs:
Modifier Mode:
Activates when any modifier (shift, alt, os, MO) key is held
down. LED turns off when key is release
Blinkinlights Mode:
Random chance of state change on each keystroke.
Keypress Mode:
On for any keypress as long as the key is pressed
Carriage Mode:
Turns on when enter is pressed, turns off when any next key is pressed
q = Toggle Red LED state, deactivates any other modes
w = Toggle Green LED state, deactivates any other modes
e = Set RED LED to modifier mode
r = Set GREEN LED to modifier mode
t = Set RED LED to Blinkinlights mode
y = set GREEN LED to Blinkinlights mode
u = set RED LED to Keypress mode
i = set GREEN LED to Keypress mode
o = set RED LED to Carriage mode
p = set GREEN LED to Carriage mode

View file

@ -63,3 +63,6 @@
#define LAYOUT_planck_mit LAYOUT_plaid_mit
#define LAYOUT_kc_ortho_4x12 KC_KEYMAP
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
#define LED_RED C5
#define LED_GREEN C4