From 8d604e707b8083fdf1a511aefd134529fdcc4839 Mon Sep 17 00:00:00 2001 From: Hassan Williamson Date: Tue, 14 Dec 2021 04:55:53 +0000 Subject: [PATCH] [Docs] Updated typo on feature_bluetooth.md (#15466) --- docs/feature_bluetooth.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/feature_bluetooth.md b/docs/feature_bluetooth.md index fdf19c1077..f6fb02d948 100644 --- a/docs/feature_bluetooth.md +++ b/docs/feature_bluetooth.md @@ -16,7 +16,7 @@ Not Supported Yet but possible: * HM-13 based boards ### Adafruit BLE SPI Friend -Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines: +Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF51822 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines: * `#define ADAFRUIT_BLE_RST_PIN D4` * `#define ADAFRUIT_BLE_CS_PIN B4` * `#define ADAFRUIT_BLE_IRQ_PIN E6`