1
0
Fork 0

Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-11-05 16:01:06 +00:00
commit 8fa8406c68
2 changed files with 26 additions and 15 deletions

View file

@ -8,7 +8,7 @@ AKA A. dux, A.D., "Giant squid"
Thank you [Perce](https://madebyperce.com/) for the logo.
## Cases can be found here:
## Case Options
* [Flat Case](https://github.com/madebyperce/aduxcase)
* [Tented Case](https://github.com/jdart/adux-tent)
@ -16,23 +16,30 @@ Thank you [Perce](https://madebyperce.com/) for the logo.
## Keyboard Info
* Keyboard Maintainer: [tapioki](https://github.com/tapioki)
* Keyboard Maintainer: [@tapioki](https://github.com/tapioki)
* Hardware Supported: Architeuthis Dux
* Hardware Availability: [GitHub](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux)
* Hardware Availability: Order PCBs with gerber files from the [repository](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux)
Make examples for this keyboard (after setting up your build environment):
Make example for this keyboard (after setting up your build environment):
make a_dux:default
make a_dux:default:avrdude-split-left
make a_dux:default:avrdude-split-right
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Setting Handedness
Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
make a_dux:default:dfu-split-left
make a_dux:default:dfu-split-right
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. (With `EE_HANDS` configured, hold down the top right key on the right half to place the right controller in bootloader mode)
* **Physical reset**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -8,21 +8,25 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt
* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
* Hardware Supported:
* [Sweep](https://github.com/davidphilipbarr/Sweep)
* [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions)
* [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
* Variants of the same 34-key direct pin PCB
* Hardware Availability: PCBs can be printed with gerber files from the repository
* Hardware Availability: order PCBs with gerber files from the repository
Make examples for this keyboard (after setting up your build environment):
Make example for this keyboard (after setting up your build environment):
make cradio:default
Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following:
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Setting Handedness
Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
make cradio:default:dfu-split-left
make cradio:default:dfu-split-right
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
## Bootloader