diff --git a/quantum/backlight/backlight.c b/quantum/backlight/backlight.c
index 4aa74667d9..4a0eac64c6 100644
--- a/quantum/backlight/backlight.c
+++ b/quantum/backlight/backlight.c
@@ -15,14 +15,62 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
+#include "quantum.h"
#include "backlight.h"
#include "eeconfig.h"
#include "debug.h"
backlight_config_t backlight_config;
+#ifdef BACKLIGHT_BREATHING
// TODO: migrate to backlight_config_t
static uint8_t breathing_period = BREATHING_PERIOD;
+#endif
+
+#ifndef BACKLIGHT_CUSTOM_DRIVER
+# if defined(BACKLIGHT_PINS)
+static const pin_t backlight_pins[] = BACKLIGHT_PINS;
+# ifndef BACKLIGHT_LED_COUNT
+# define BACKLIGHT_LED_COUNT (sizeof(backlight_pins) / sizeof(pin_t))
+# endif
+
+# define FOR_EACH_LED(x) \
+ for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \
+ pin_t backlight_pin = backlight_pins[i]; \
+ { x } \
+ }
+# else
+// we support only one backlight pin
+static const pin_t backlight_pin = BACKLIGHT_PIN;
+# define FOR_EACH_LED(x) x
+# endif
+
+static inline void backlight_on(pin_t backlight_pin) {
+# if BACKLIGHT_ON_STATE == 0
+ writePinLow(backlight_pin);
+# else
+ writePinHigh(backlight_pin);
+# endif
+}
+
+static inline void backlight_off(pin_t backlight_pin) {
+# if BACKLIGHT_ON_STATE == 0
+ writePinHigh(backlight_pin);
+# else
+ writePinLow(backlight_pin);
+# endif
+}
+
+void backlight_pins_init(void) {
+ // Setup backlight pin as output and output to off state.
+ FOR_EACH_LED(setPinOutput(backlight_pin); backlight_off(backlight_pin);)
+}
+
+void backlight_pins_on(void) { FOR_EACH_LED(backlight_on(backlight_pin);) }
+
+void backlight_pins_off(void) { FOR_EACH_LED(backlight_off(backlight_pin);) }
+
+#endif
/** \brief Backlight initialization
*
@@ -205,7 +253,6 @@ void backlight_disable_breathing(void) {
* FIXME: needs doc
*/
bool is_backlight_breathing(void) { return backlight_config.breathing; }
-#endif
// following are marked as weak purely for backwards compatibility
__attribute__((weak)) void breathing_period_set(uint8_t value) { breathing_period = value ? value : 1; }
@@ -218,6 +265,15 @@ __attribute__((weak)) void breathing_period_inc(void) { breathing_period_set(bre
__attribute__((weak)) void breathing_period_dec(void) { breathing_period_set(breathing_period - 1); }
+__attribute__((weak)) void breathing_toggle(void) {
+ if (is_breathing())
+ breathing_disable();
+ else
+ breathing_enable();
+}
+
+#endif
+
// defaults for backlight api
__attribute__((weak)) void backlight_init_ports(void) {}
diff --git a/quantum/backlight/backlight.h b/quantum/backlight/backlight.h
index 08acf942ff..07a4880e9f 100644
--- a/quantum/backlight/backlight.h
+++ b/quantum/backlight/backlight.h
@@ -26,6 +26,10 @@ along with this program. If not, see .
# error "Maximum value of BACKLIGHT_LEVELS is 31"
#endif
+#ifndef BACKLIGHT_ON_STATE
+# define BACKLIGHT_ON_STATE 1
+#endif
+
#ifndef BREATHING_PERIOD
# define BREATHING_PERIOD 6
#endif
@@ -40,6 +44,10 @@ typedef union {
};
} backlight_config_t;
+void backlight_pins_init(void);
+void backlight_pins_on(void);
+void backlight_pins_off(void);
+
void backlight_init(void);
void backlight_toggle(void);
void backlight_enable(void);
diff --git a/quantum/backlight/backlight_arm.c b/quantum/backlight/backlight_arm.c
index 397a1ac1a8..a6d38a1a02 100644
--- a/quantum/backlight/backlight_arm.c
+++ b/quantum/backlight/backlight_arm.c
@@ -158,13 +158,6 @@ void breathing_self_disable(void) {
breathing_halt = BREATHING_HALT_ON;
}
-void breathing_toggle(void) {
- if (is_breathing())
- breathing_disable();
- else
- breathing_enable();
-}
-
/* To generate breathing curve in python:
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
*/
diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c
index ce6611fb5a..40291d3821 100644
--- a/quantum/backlight/backlight_avr.c
+++ b/quantum/backlight/backlight_avr.c
@@ -164,49 +164,7 @@ error("Please set 'BACKLIGHT_DRIVER = custom' within rules.mk")
error("Please set 'BACKLIGHT_DRIVER = software' within rules.mk")
#endif
-#ifndef BACKLIGHT_ON_STATE
-# define BACKLIGHT_ON_STATE 1
-#endif
-
-void backlight_on(pin_t backlight_pin) {
-#if BACKLIGHT_ON_STATE == 1
- writePinHigh(backlight_pin);
-#else
- writePinLow(backlight_pin);
-#endif
-}
-
-void backlight_off(pin_t backlight_pin) {
-#if BACKLIGHT_ON_STATE == 1
- writePinLow(backlight_pin);
-#else
- writePinHigh(backlight_pin);
-#endif
-}
-
-#ifdef BACKLIGHT_PWM_TIMER // pwm through software
-
-// we support multiple backlight pins
-# ifndef BACKLIGHT_LED_COUNT
-# define BACKLIGHT_LED_COUNT 1
-# endif
-
-# if BACKLIGHT_LED_COUNT == 1
-# define BACKLIGHT_PIN_INIT \
- { BACKLIGHT_PIN }
-# else
-# define BACKLIGHT_PIN_INIT BACKLIGHT_PINS
-# endif
-
-# define FOR_EACH_LED(x) \
- for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \
- pin_t backlight_pin = backlight_pins[i]; \
- { x } \
- }
-
-static const pin_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT;
-
-#else // full hardware PWM
+#ifndef BACKLIGHT_PWM_TIMER // pwm through software
static inline void enable_pwm(void) {
# if BACKLIGHT_ON_STATE == 1
@@ -224,10 +182,6 @@ static inline void disable_pwm(void) {
# endif
}
-// we support only one backlight pin
-static const pin_t backlight_pin = BACKLIGHT_PIN;
-# define FOR_EACH_LED(x) x
-
#endif
#ifdef BACKLIGHT_PWM_TIMER
@@ -246,7 +200,7 @@ static const pin_t backlight_pin = BACKLIGHT_PIN;
// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz.
// Triggered when the counter reaches the OCRx value
-ISR(TIMERx_COMPA_vect) { FOR_EACH_LED(backlight_off(backlight_pin);) }
+ISR(TIMERx_COMPA_vect) { backlight_pins_off(); }
// Triggered when the counter reaches the TOP value
// this one triggers at F_CPU/65536 =~ 244 Hz
@@ -265,7 +219,7 @@ ISR(TIMERx_OVF_vect) {
// takes many computation cycles).
// so better not turn them on while the counter TOP is very low.
if (OCRxx > 256) {
- FOR_EACH_LED(backlight_on(backlight_pin);)
+ backlight_pins_on();
}
}
@@ -305,7 +259,7 @@ void backlight_set(uint8_t level) {
// Turn off PWM control on backlight pin
disable_pwm();
#endif
- FOR_EACH_LED(backlight_off(backlight_pin);)
+ backlight_pins_off();
} else {
#ifdef BACKLIGHT_PWM_TIMER
if (!OCRxx) {
@@ -397,13 +351,6 @@ void breathing_self_disable(void) {
breathing_halt = BREATHING_HALT_ON;
}
-void breathing_toggle(void) {
- if (is_breathing())
- breathing_disable();
- else
- breathing_enable();
-}
-
/* To generate breathing curve in python:
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
*/
@@ -438,7 +385,7 @@ ISR(TIMERx_OVF_vect)
void backlight_init_ports(void) {
// Setup backlight pin as output and output to on state.
- FOR_EACH_LED(setPinOutput(backlight_pin); backlight_on(backlight_pin);)
+ backlight_pins_init();
// I could write a wall of text here to explain... but TL;DW
// Go read the ATmega32u4 datasheet.
diff --git a/quantum/backlight/backlight_soft.c b/quantum/backlight/backlight_soft.c
index 096b41d910..8552384a42 100644
--- a/quantum/backlight/backlight_soft.c
+++ b/quantum/backlight/backlight_soft.c
@@ -9,47 +9,7 @@
# error "Backlight breathing is not available for software PWM. Please disable."
#endif
-#ifndef BACKLIGHT_ON_STATE
-# define BACKLIGHT_ON_STATE 1
-#endif
-
-#ifdef BACKLIGHT_PINS
-# define BACKLIGHT_PIN_INIT BACKLIGHT_PINS
-#else
-# define BACKLIGHT_PIN_INIT \
- { BACKLIGHT_PIN }
-#endif
-
-static uint16_t s_duty_pattern = 0;
-static const pin_t backlight_pins[] = BACKLIGHT_PIN_INIT;
-#define BACKLIGHT_LED_COUNT (sizeof(backlight_pins) / sizeof(pin_t))
-
-#define FOR_EACH_LED(x) \
- for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \
- pin_t backlight_pin = backlight_pins[i]; \
- { x } \
- }
-
-void backlight_on(pin_t backlight_pin) {
-#if BACKLIGHT_ON_STATE == 0
- writePinLow(backlight_pin);
-#else
- writePinHigh(backlight_pin);
-#endif
-}
-
-void backlight_off(pin_t backlight_pin) {
-#if BACKLIGHT_ON_STATE == 0
- writePinHigh(backlight_pin);
-#else
- writePinLow(backlight_pin);
-#endif
-}
-
-void backlight_init_ports(void) {
- // Setup backlight pin as output and output to off state.
- FOR_EACH_LED(setPinOutput(backlight_pin); backlight_off(backlight_pin);)
-}
+static uint16_t s_duty_pattern = 0;
// clang-format off
@@ -58,7 +18,7 @@ void backlight_init_ports(void) {
* We scale the current backlight level to an index within this array. This allows
* backlight_task to focus on just switching LEDs on/off, and we can predict the duty pattern
*/
-static uint16_t backlight_duty_table[] = {
+static const uint16_t backlight_duty_table[] = {
0b0000000000000000,
0b1000000000000000,
0b1000000010000000,
@@ -75,15 +35,17 @@ static uint16_t backlight_duty_table[] = {
static uint8_t scale_backlight(uint8_t v) { return v * (backlight_duty_table_size - 1) / BACKLIGHT_LEVELS; }
+void backlight_init_ports(void) { backlight_pins_init(); }
+
+void backlight_set(uint8_t level) { s_duty_pattern = backlight_duty_table[scale_backlight(level)]; }
+
void backlight_task(void) {
static uint8_t backlight_tick = 0;
if (s_duty_pattern & ((uint16_t)1 << backlight_tick)) {
- FOR_EACH_LED(backlight_on(backlight_pin);)
+ backlight_pins_on();
} else {
- FOR_EACH_LED(backlight_off(backlight_pin);)
+ backlight_pins_off();
}
backlight_tick = (backlight_tick + 1) % 16;
}
-
-void backlight_set(uint8_t level) { s_duty_pattern = backlight_duty_table[scale_backlight(level)]; }