1
0
Fork 0

Merge pull request #1419 from Wraul/phantom-improvements

Phantom improvements
This commit is contained in:
Jack Humbert 2017-06-23 14:43:32 -04:00 committed by GitHub
commit 91f3a73a28
14 changed files with 632 additions and 198 deletions

View file

@ -24,9 +24,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0003
#define MANUFACTURER PHANTOM
#define PRODUCT PHANTOM RGB MOD
#define DESCRIPTION QMK keyboard firmware for PHANTOM TKL
#define MANUFACTURER bpiphany
#define PRODUCT PHANTOM
#define DESCRIPTION QMK keyboard firmware for PHANTOM
/* key matrix size */
#define MATRIX_ROWS 6
@ -44,6 +44,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Underlight configuration
*/
#define RGB_DI_PIN E2
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
@ -55,19 +68,79 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Underlight configuration
*/
#define RGB_DI_PIN E2
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
@ -87,4 +160,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View file

@ -0,0 +1,37 @@
# Copyright 2013 Jun Wako <wakojun@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# QMK Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,24 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -1,7 +1,22 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "phantom.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Helpful defines
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
@ -11,92 +26,52 @@
#define _FL 1
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer
* ,-----------------------------------------------------------------------------.
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus|
* |-----------------------------------------------------------| |--------------|
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp|
* |-----------------------------------------------------------| |--------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn|
* |-----------------------------------------------------------| `--------------'
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
* |-----------------------------------------------------------| ,----.
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
* |-----------------------------------------------------------| ,-------------.
* |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig |
* `-----------------------------------------------------------' `-------------'
*/
[_BL] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
* ,-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------| |--------------|
* | | | | | | | | | | | | | | Reset | | | | |
* |-----------------------------------------------------------| |--------------|
* | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------| `--------------'
* | | | | | | | | | | | | | |
* |-----------------------------------------------------------| ,----.
* | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | |
* |-----------------------------------------------------------| ,-------------.
* | | | | | | | | | | | | |
* `-----------------------------------------------------------' `-------------'
*/
[_FL] = KEYMAP(
#ifdef RGBLIGHT_ENABLE
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
#else
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
#endif
[_BL] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_BRK, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
),
[_FL] = KEYMAP(
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSEL, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
),
};
enum function_id {
SHIFT_ESC,
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask;
switch (id) {
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1,45 @@
# Keymap for a standard winkey ANSI configuration of the Phantom
A basic keymap intended for a Phantom using the standard ANSI layout.
See [keymap.c](keymap.c) for details.
## Layers
The keymap have two layers. To access the functions on the second layer, hold down `Fn` and press the corresponding key.
### Layer 1: Default Layer
,---. ,---------------. ,---------------. ,---------------. ,-----------.
|Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
`---' `---------------' `---------------' `---------------' `-----------'
,-----------------------------------------------------------. ,-----------.
|~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
|-----------------------------------------------------------| |-----------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
|-----------------------------------------------------------| '-----------'
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
|-----------------------------------------------------------| ,---.
|Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
|-----------------------------------------------------------| ,-----------.
|Ctl|Gui|Alt| Space |Alt|Gui|Fn |Ctl| |Lef|Dow|Rig|
`-----------------------------------------------------------' `-----------'
### Layer 2: Function Layer
,---. ,---------------. ,---------------. ,---------------. ,-----------.
| | | | | | | | | | | | |Stp|Ply|Prv|Nxt| |Mut|Vo-|Vo+|
`---' `---------------' `---------------' `---------------' `-----------'
,-----------------------------------------------------------. ,-----------.
| | | | | | | | | | | | | | | | | | |
|-----------------------------------------------------------| |-----------|
| | | | | | | | | | | | | | | | | | |
|-----------------------------------------------------------| '-----------'
| | | | | | | | | | | | | Media |
|-----------------------------------------------------------| ,---.
| | | |Cal| | | | | | | | | | |
|-----------------------------------------------------------| ,-----------.
| | | | | | | | | | | | |
`-----------------------------------------------------------' `-----------'
## Building
To build the firmware with the default keymap, run `make default`.

View file

@ -0,0 +1,37 @@
# Copyright 2013 Jun Wako <wakojun@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# QMK Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,24 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,77 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "phantom.h"
// Helpful defines
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BL] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
),
[_FL] = KEYMAP(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, \
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -1,43 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_init_ports(void) {
// * Set our LED pins as output
DDRB |= (1<<6);
DDRB |= (1<<7);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB |= (1<<6);
} else {
// Turn capslock off
PORTB &= ~(1<<6);
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// Turn scrolllock on
PORTB |= (1<<7);
} else {
// Turn scrolllock off
PORTB &= ~(1<<7);
}
}

View file

@ -1,9 +1,63 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "phantom.h"
#include "led.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
};
// put your keyboard start-up code here
// runs once when the firmware starts up
led_init_ports();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_init_ports(void) {
DDRB |= (1<<6) | (1<<7); // OUT
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK))
{
PORTB |= (1<<6); // HI
}
else
{
PORTB &= ~(1<<6); // LO
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
{
PORTB |= (1<<7); // HI
}
else
{
PORTB &= ~(1<<7); // LO
}
led_set_user(usb_led);
}

View file

@ -1,40 +1,105 @@
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef PHANTOM_H
#define PHANTOM_H
#include "quantum.h"
/* Phantom matrix layout
* ,-----------------------------------------------------------------------------.
* |00 |02| 03| 04| 05| | 06| 07| 08| 09| | 0a|0b |0c |0d | |0e |0f |0g |
* |-----------------------------------------------------------| |--------------|
* | 01| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1d | |1e |1f |1g |
* |-----------------------------------------------------------| |--------------|
* |20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| | 2e | 2f | 2g |
* |-----------------------------------------------------------| `--------------'
* |30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
* |-----------------------------------------------------------| ,----.
* | 40 | 42| 43| 44| 45| 46| 47| 48| 49| 4a| 4b| 4d | | 4f |
* |-----------------------------------------------------------| ,-------------.
* | 50 | 51 | 52 | 57 |5a | 5b | 5c | 5d | | 5e| 5f | 5g |
* `-----------------------------------------------------------' `-------------'
*/
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
k01, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1e, k1f, k1g, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4f, \
k50, k51, k52, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1d, k1e, k1f, k1g}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3d, k3d, k3d, k3d}, \
{k40, k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4d, k4f, k4f, k4f}, \
{k50, k51, k52, k57, k57, k57, k57, k57, k57, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g} \
// Keymap utilizing all the possible keys on the PCB.
#define KEYMAP_7BIT( \
K00, K53, K02, K03, K04, K05, K56, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K4G, \
K50, K51, K52, K54, K55, K57, K58, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
) { \
/* 0 1 2 3 4 5 6 7 8 9 A B C D E F G */ \
/* 0 */ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \
/* 1 */ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
/* 2 */ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
/* 3 */ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G }, \
/* 4 */ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K4G }, \
/* 5 */ { K50, K51, K52, K53, K54, K55, K56, K57, K58, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G } \
}
// Keymap for a standard ANSI layout.
#define KEYMAP( \
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
K50, K51, K52, K57, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
) KEYMAP_7BIT( \
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, \
K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
)
#define KEYMAP_WINKEYLESS( \
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
K50, K51, K52, K57, K5B, K5C, K5D, K5E, K5F, K5G \
) KEYMAP_7BIT( \
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, \
K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, KC_NO, K5B, K5C, K5D, K5E, K5F, K5G \
)
#define KEYMAP_ISO( \
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
K50, K51, K52, K57, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
) KEYMAP_7BIT( \
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO, KC_NO, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
)
#define KEYMAP_ISO_WINKEYLESS( \
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
K50, K51, K52, K57, K5B, K5C, K5D, K5E, K5F, K5G \
) KEYMAP_7BIT( \
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, K2F, K2G, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO, KC_NO, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, KC_NO, K5B, K5C, K5D, K5E, K5F, K5G \
)
#endif

View file

@ -1 +0,0 @@
For WS2812B LED strip support, connect DIN from strip to PE2 on Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg)

View file

@ -1,4 +1,48 @@
Phantom keyboard firmware
======================
=========================
TODO: to be updated.
A community-developed keyboard PCB designed to fit inside the case of a Filco Majestouch.
See the [Deskthority wiki](https://deskthority.net/wiki/Phantom) for more information.
## Bootloader
The Phantom uses a [Teensy 2.0](https://www.pjrc.com/store/teensy.html) as a controller.
The Teensy has a special bootloader that can be accessed by pressing the button on the Teensy PCB. It is also possible to use Boot Magic and Command to access the bootloader.
To write the firmware to the Teensy use [Teensy loader](https://www.pjrc.com/teensy/loader.html).
## Quantum MK Firmware
For the full Quantum feature list, see the [documentation](https://docs.qmk.fm).
## RGB underlight
It is possible to connect a WS2812B LED strip to the Teensy for RGB underlight support.
For this to work the DIN connection on the WS2812B strip should be soldered to PE2 on the Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg).
See [rgbmod](keymaps/rgbmod) for a keymap that utilizes the RGB underlight feature.
## Building
The Phantom allows for a huge amount of different layouts.
Depending on which layout and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/phantom](/keyboards/phantom) folder.
### Custom keymaps
To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/Keymap.html) for details on how to modify the keymap.
To make it easy to define keymaps for the most common layouts a few macros are provided.
| Layout | Macro |
| --------------- | ------------------------- |
| Winkey ANSI | `KEYMAP()` |
| Winkeyless ANSI | `KEYMAP_WINKEYLESS()` |
| Winkey ISO | `KEYMAP_ISO()` |
| Winkeyless ISO | `KEYMAP_ISO_WINKEYLESS()` |
| 7BIT | `KEYMAP_7BIT()` |
To build the firmware with a custom keymap, run `make <keymap name>`

View file

@ -1,7 +1,3 @@
SRC = led.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
@ -53,17 +49,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870)
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150)
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= no
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= yes # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches