Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge pull request #676 from ickerwx/kitten_paw

Browse source 
Added support for the Kitten Paw controller
This commit is contained in:
Jack Humbert 2016-08-23 00:26:59 -04:00 committed by GitHub
commit 9ca4c9f57f
9 changed files with 611 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

77
keyboards/kitten_paw/Makefile Normal file
View file

@ -0,0 +1,77 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u2
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
CUSTOM_MATRIX = yes
SRC += matrix.c led.c
ifndef QUANTUM_DIR
include ../../Makefile
endif

162
keyboards/kitten_paw/config.h Normal file
View file

@ -0,0 +1,162 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6050
#define DEVICE_VER 0x0104
#define MANUFACTURER Costar
#define PRODUCT Majestouch
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 18
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
//#define MATRIX_ROW_PINS { D0, D5 }
//#define MATRIX_COL_PINS { F1, F0, B0 }
//#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

51
keyboards/kitten_paw/keymaps/default/keymap.c Normal file
View file

@ -0,0 +1,51 @@
#include "kitten_paw.h"
enum layers {
DEFAULT,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[DEFAULT] = KEYMAP(\
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

30
keyboards/kitten_paw/kitten_paw.c Normal file
View file

@ -0,0 +1,30 @@
#include "kitten_paw.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_quantum();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_quantum();
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

47
keyboards/kitten_paw/kitten_paw.h Normal file
View file

@ -0,0 +1,47 @@
#ifndef KITTEN_PAW_H
#define KITTEN_PAW_H
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
/*
Matrix col/row mapping
,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
| J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
`----' `-------------------' `-------------------' `-------------------' `--------------'
,-------------------------------------------------------------------------. ,--------------. ,-------------------.
| J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
|-------------------------------------------------------------------------| |--------------| |-------------------|
| J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
|-------------------------------------------------------------------------| '--------------' |-------------- |
| O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
|-------------------------------------------------------------------------| ,----. |-------------------|
| N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
|-------------------------------------------------------------------------| ,--------------. |-------------- |
| A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
`-------------------------------------------------------------------------' `--------------' `-------------------'
*/
#define KEYMAP( \
KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
) \
{ \
{KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \
{ KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \
{KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \
{KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \
{ KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \
{ KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \
{KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \
{ KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \
}
#endif

47
keyboards/kitten_paw/led.c Normal file
View file

@ -0,0 +1,47 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
/* LED pin configuration
*
* Scroll Lock PC5
* Caps Lock PC6
* Num Lock PB7
*
*/
void led_set(uint8_t usb_led) {
DDRB |= (1<<7);
DDRC |= (1<<5) | (1<<6);
if (usb_led & (1<<USB_LED_CAPS_LOCK))
PORTC &= ~(1<<6);
else
PORTC |= (1<<6);
if (usb_led & (1<<USB_LED_NUM_LOCK))
PORTB &= ~(1<<7);
else
PORTB |= (1<<7);
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
PORTC &= ~(1<<5);
else
PORTC |= (1<<5);
}

164
keyboards/kitten_paw/matrix.c Normal file
View file

@ -0,0 +1,164 @@
/*
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
static uint8_t debouncing = DEBOUNCING_DELAY;
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static uint8_t read_rows(void);
static void select_col(uint8_t col);
inline uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
/* Column pin configuration
*
* col: 0 1 2 3 4 5 6 7
* pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2
*
* Rrr pin configuration
*
* These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low
* active), together with 2 rrrs driven directly from the micro
* controller, to control the 18 rrrs. The rrrs are driven from
* pins B6,5,4,3,2,1,0.
*/
void matrix_init(void) {
DDRC &= ~0b10000100; // Row input pins
DDRD &= ~0b01111110;
PORTC |= 0b10000100;
PORTD |= 0b01111110;
DDRB |= 0b01111111; // Column output pins
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
select_col(col);
_delay_us(3);
uint8_t rows = read_rows();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
debouncing = DEBOUNCING_DELAY;
}
}
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
}
else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void) {
if (debouncing)
return false;
else
return true;
}
inline bool matrix_is_on(uint8_t row, uint8_t col) {
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}
void matrix_print(void) {
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
}
}
uint8_t matrix_key_count(void) {
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop32(matrix[i]);
}
return count;
}
static uint8_t read_rows(void) {
return
(PINC&(1<<7) ? 0 : (1<<0)) |
(PIND&(1<<5) ? 0 : (1<<1)) |
(PIND&(1<<3) ? 0 : (1<<2)) |
(PIND&(1<<1) ? 0 : (1<<3)) |
(PINC&(1<<2) ? 0 : (1<<4)) |
(PIND&(1<<2) ? 0 : (1<<5)) |
(PIND&(1<<4) ? 0 : (1<<6)) |
(PIND&(1<<6) ? 0 : (1<<7));
}
static void select_col(uint8_t col) {
switch (col) {
case 0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break;
case 1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break;
case 2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break;
case 3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break;
case 4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break;
case 5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break;
case 6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break;
case 7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break;
case 8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break;
case 9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break;
case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break;
case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break;
case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break;
case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break;
case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break;
case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break;
case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break;
case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break;
}
}

32
keyboards/kitten_paw/readme.md Normal file
View file

@ -0,0 +1,32 @@
kitten_paw keyboard firmware
======================
This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies.
Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies).
NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me.
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/kitten_paw folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
```
$ make keymap=[default|jack|<name>]
```
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

1
keyboards/readme.md
View file

@ -39,6 +39,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
* [hhkb](/keyboards/hhkb) &mdash; The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
* [jd45](/keyboards/jd45) &mdash; Another Geekhack community project, designed by jdcarpe.
* [kc60](/keyboards/kc60) &mdash; A programmable Chinese-made keyboard, lost in the mists of time.
* [kitten_paw](/keyboards/kitten_paw) &mdash; A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies)
* [phantom](/keyboards/phantom) &mdash; A tenkeyless kit by Teel, also from Geekhack.
* [retro_refit](/keyboards/retro_refit) &mdash; Another creation by IBNobody.
* [satan](/keyboards/satan) &mdash; A GH60 variant.