diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 23fbfd0b9a..fd45c2bfe3 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -43,38 +43,107 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 } #define UNUSED_PINS -/* COL2ROW or ROW2COL */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE +// #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE +// #define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO /* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \ ) +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ -//#define NO_DEBUG +// #define NO_DEBUG /* disable print */ -//#define NO_PRINT +// #define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 6eb4e903f7..992a03a417 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -987,8 +987,8 @@ void matrix_scan_user(void) { led_set_layer_indicator(); } -void battery_poll(float percentage) { - rgbsps_sethsv(LED_IND_BATTERY, percentage*120/100, 255, 15); +void battery_poll(uint8_t level) { + rgbsps_sethsv(LED_IND_BATTERY, level * 120/255, 255, 15); rgbsps_send(); } diff --git a/keyboards/handwired/promethium/promethium.c b/keyboards/handwired/promethium/promethium.c index adfc11e2ac..3e369a6246 100644 --- a/keyboards/handwired/promethium/promethium.c +++ b/keyboards/handwired/promethium/promethium.c @@ -3,20 +3,17 @@ #include "timer.h" #include "matrix.h" -float battery_percentage(void) { +// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36}, {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100} + +uint8_t battery_level(void) { float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024; - float percentage = (voltage - 3.5) * 143; - if (percentage > 100) { - return 100; - } else if (percentage < 0) { - return 0; - } else { - return percentage; - } + if (voltage < MIN_VOLTAGE) return 0; + if (voltage > MAX_VOLTAGE) return 255; + return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255; } __attribute__ ((weak)) -void battery_poll(float percentage) { +void battery_poll(uint8_t level) { } void matrix_init_kb(void) { @@ -29,7 +26,7 @@ void matrix_scan_kb(void) { if (counter > BATTERY_POLL) { counter = 0; - battery_poll(battery_percentage()); + battery_poll(battery_level()); } matrix_scan_user(); diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index 6d51f81ca6..da37e5c560 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -7,6 +7,8 @@ #define UNICODE_TYPE_DELAY 0 #define BATTERY_PIN 9 #define BATTERY_POLL 30000 +#define MAX_VOLTAGE 4.2 +#define MIN_VOLTAGE 3.2 #define KEYMAP( \ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ @@ -103,4 +105,4 @@ enum led_sequence { #endif -void battery_poll(float percentage); \ No newline at end of file +void battery_poll(uint8_t level); \ No newline at end of file