1
0
Fork 0

Melody96 QMK Support (#3108)

* Initial melody96 keyboard definition.

* Fixes for Melody96 keyboard definition.
This commit is contained in:
kaylanm 2018-06-02 12:14:06 -04:00 committed by Drashna Jaelre
parent 5ce0d64027
commit a055a45b13
6 changed files with 229 additions and 0 deletions

View file

@ -0,0 +1,58 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER YMDK
#define PRODUCT Melody96
#define DESCRIPTION Melody96
/* key matrix size */
#define MATRIX_ROWS 12
#define MATRIX_COLS 9
/* key matrix pins */
#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* number of backlight levels */
#define BACKLIGHT_PIN B6
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 5
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 18
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
#endif

View file

@ -0,0 +1,70 @@
#include QMK_KEYBOARD_H
#define _______ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),
LAYOUT(
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
return MACRO_NONE;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRC |= (1 << 6); PORTC &= ~(1 << 6);
} else {
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRC |= (1 << 7); PORTC &= ~(1 << 7);
} else {
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
} else {
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

View file

@ -0,0 +1 @@
#include "melody96.h"

View file

@ -0,0 +1,28 @@
#ifndef MELODY96_H
#define MELODY96_H
#include "quantum.h"
#define LAYOUT( \
K050, K051, K052, K053, K054, K055, K056, K057, K058, K118, K117, K115, K114, K113, K116, K112, K111, K110, K063, \
K040, K041, K042, K043, K044, K045, K046, K047, K048, K108, K107, K105, K104, K103, K106, K102, K101, K100, K064, \
K030, K031, K032, K033, K034, K035, K036, K037, K038, K098, K097, K095, K094, K084, K096, K092, K091, K090, \
K020, K021, K022, K023, K024, K025, K026, K027, K028, K088, K087, K085, K093, K086, K082, K081, K080, \
K010, K011, K012, K013, K014, K015, K016, K017, K018, K078, K077, K075, K074, K073, K076, K072, K071, K070, \
K000, K001, K002, K006, K008, K007, K005, K004, K003, K066, K062, K061, K060 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \
{ K060, K061, K062, K063, K064, KC_NO, K066, KC_NO, KC_NO }, \
{ K070, K071, K072, K073, K074, K075, K076, K077, K078 }, \
{ K080, K081, K082, KC_NO, K084, K085, K086, K087, K088 }, \
{ K090, K091, K092, K093, K094, K095, K096, K097, K098 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108 }, \
{ K110, K111, K112, K113, K114, K115, K116, K117, K118 } \
}
#endif

View file

@ -0,0 +1,15 @@
# YMDK Melody96
![melody96](https://i.imgur.com/9o0a6XF.png)
96-key Keyboard from YMDK
Keyboard Maintainer: [superuser41](https://github.com/kaylanm)
Hardware Supported: melody96
Hardware Availability: [YMDK, group buy closed](https://geekhack.org/index.php?topic=93614.0)
Make example for this keyboard (after setting up your build environment):
make melody96:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View file

@ -0,0 +1,57 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes