1
0
Fork 0

Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2022-01-09 01:30:24 +00:00
commit a120a166b9
11 changed files with 775 additions and 0 deletions

View file

@ -0,0 +1,4 @@
// Copyright 2021 Michael McCoyd (@mmccoyd)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "0_1.h"

View file

@ -0,0 +1,34 @@
// Copyright 2021 Michael McCoyd (@mmccoyd)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts those identifiers into a two-dimensional array which
* represents the switch matrix.
*/
// clang-format off
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, LT4, RT4, R20, R21, R22, R23, R24, R25, \
L30, LT0, LT1, LT2, LT3, RT3, RT2, RT1, RT0, R30 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, LT0, LT1, LT2, LT3, LT4 }, \
{ R05, R04, R03, R02, R01, R00 }, \
{ R15, R14, R13, R12, R11, R10 }, \
{ R25, R24, R23, R22, R21, R20 }, \
{ R30, RT0, RT1, RT2, RT3, RT4 } \
}
// clang-format on

View file

@ -0,0 +1,35 @@
// Copyright 2021 Michael McCoyd (@mmccoyd)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "config_common.h"
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
/* Encoder */
#define ENCODERS_PAD_A { F5 }
#define ENCODERS_PAD_B { F4 }
#define ENCODERS_PAD_A_RIGHT { F4 }
#define ENCODERS_PAD_B_RIGHT { F5 }
#define RGBLIGHT_SLEEP
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
#define FB_ERM_LRA 1
#define FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* Please refer to your datasheet for optimal setting for your specific motor.*/
#define RATED_VOLTAGE 2
#define V_PEAK 2.8
#define V_RMS 2.0
#define F_LRA 205 /* resonance freq */
/* Haptic waveforms */
// Two mild waveforms
#define DRV_GREETING alert_750ms
#define DRV_MODE_DEFAULT sharp_tick3_60

View file

@ -0,0 +1,13 @@
{
"matrix_pins": {
"rows": ["D7", "E6", "B4", "B5"],
"cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
},
"diode_direction": "COL2ROW",
"usb": {
"vid": "0xFEED",
"pid": "0x67C0",
"device_ver": "0x0001"
},
}

View file

@ -0,0 +1,8 @@
SPLIT_KEYBOARD = yes # Use shared split_common code
LTO_ENABLE = yes # Use link time optimization for smaller firmware
# If you add a haptic board,
# enable it and set its driver here or in your keymap folder
# The Pimoroni board's driver is DRV2605L
# HAPTIC_ENABLE = yes # Enable haptic driver
# HAPTIC_DRIVER = DRV2605L

View file

@ -0,0 +1,97 @@
{
"manufacturer": "mmccoyd",
"maintainer": "mmccoyd",
"keyboard_name": "Hillside",
"url": "http://github.com/mmccoyd/hillside/",
"tags": ["split", "column stagger", "choc v1", "choc spaced" ],
"processor": "atmega32u4",
"features": {
"encoder": true,
"extrakey": true,
"rgblight": true
},
"split": {
"soft_serial_pin": "D2",
"main": "left"
},
"rgblight": {
"led_count": 5,
"pin": "D3",
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
"brightness_steps": 8
},
"layouts": {
"LAYOUT": {
"layout": [
{"label": "Tab", "x": 0, "y": 0.93},
{"label": "Q", "x": 1, "y": 0.93},
{"label": "W", "x": 2, "y": 0.31},
{"label": "E", "x": 3, "y": 0},
{"label": "R", "x": 4, "y": 0.28},
{"label": "T", "x": 5, "y": 0.42},
{"label": "Y", "x": 9.5, "y": 0.42},
{"label": "U", "x": 10.5, "y": 0.28},
{"label": "I", "x": 11.5, "y": 0},
{"label": "O", "x": 12.5, "y": 0.31},
{"label": "P", "x": 13.5, "y": 0.93},
{"label": "Backspace", "x": 14.5, "y": 0.93},
{"label": "Ctrl", "x": 0, "y": 1.93},
{"label": "A", "x": 1, "y": 1.93},
{"label": "S", "x": 2, "y": 1.31},
{"label": "D", "x": 3, "y": 1},
{"label": "F", "x": 4, "y": 1.28},
{"label": "G", "x": 5, "y": 1.42},
{"label": "H", "x": 9.5, "y": 1.42},
{"label": "J", "x": 10.5, "y": 1.28},
{"label": "K", "x": 11.5, "y": 1},
{"label": "L", "x": 12.5, "y": 1.31},
{"label": ";", "x": 13.5, "y": 1.93},
{"label": "'", "x": 14.5, "y": 1.93},
{"label": "Shift", "x": 0, "y": 2.93},
{"label": "Z", "x": 1, "y": 2.93},
{"label": "X", "x": 2, "y": 2.31},
{"label": "C", "x": 3, "y": 2},
{"label": "V", "x": 4, "y": 2.28},
{"label": "B", "x": 5, "y": 2.42},
{"label": "`", "x": 6, "y": 2.78},
{"label": "Esc", "x": 8.5, "y": 2.78},
{"label": "N", "x": 9.5, "y": 2.42},
{"label": "M", "x": 10.5, "y": 2.28},
{"label": ",", "x": 11.5, "y": 2},
{"label": ".", "x": 12.5, "y": 2.31},
{"label": "/", "x": 13.5, "y": 2.93},
{"label": "Shift", "x": 14.5, "y": 2.93},
{"label": "Enter", "x": 2, "y": 3.31},
{"label": "Gui", "x": 3.5, "y": 3.28},
{"label": "Alt", "x": 4.5, "y": 3.42},
{"label": "Num", "x": 5.5, "y": 3.78},
{"label": "Nav", "x": 6.5, "y": 4.14},
{"label": "Sym", "x": 8, "y": 4.14},
{"label": "Space", "x": 9, "y": 3.78},
{"label": "Alt", "x": 10, "y": 3.42},
{"label": "Gui", "x": 11, "y": 3.28},
{"label": "App", "x": 12.5, "y": 3.31}
]
}
}
}

View file

@ -0,0 +1,102 @@
{
"version": 1,
"notes": "",
"documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
"keyboard": "handwired/hillside/0_1",
"author": "@mmccoyd",
"keymap": "default",
"layout": "LAYOUT",
"layers": [
["KC_TAB" , "KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T",
"KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_S" , "KC_D" , "KC_F" , "KC_G",
"KC_H" , "KC_J" , "KC_K" , "KC_L" , "KC_SCLN" , "KC_QUOT",
"KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_V" , "KC_B" , "KC_GRV",
"KC_ESC" , "KC_N" , "KC_M" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_TAB" , "KC_QUOT" , "KC_COMM" , "KC_DOT" , "KC_P" , "KC_Y",
"KC_F" , "KC_G" , "KC_C" , "KC_R" , "KC_L" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_O" , "KC_E" , "KC_U" , "KC_I",
"KC_D" , "KC_H" , "KC_T" , "KC_N" , "KC_S" , "KC_SLSH",
"KC_LSFT", "KC_SCLN" , "KC_Q" , "KC_J" , "KC_K" , "KC_X" , "KC_GRV",
"KC_ESC" , "KC_B" , "KC_M" , "KC_W" , "KC_V" , "KC_Z" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_TAB" , "KC_Q" , "KC_W" , "KC_F" , "KC_P" , "KC_B",
"KC_J" , "KC_L" , "KC_U" , "KC_Y" , "KC_SCLN" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_R" , "KC_S" , "KC_T" , "KC_G",
"KC_M" , "KC_N" , "KC_E" , "KC_I" , "KC_O" , "KC_QUOT",
"KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_D" , "KC_V" , "KC_GRV",
"KC_ESC" , "KC_K" , "KC_H" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_CAPS", "KC_INS" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_VOLU",
"KC_PGUP", "KC_HOME" , "KC_NO" , "KC_END" , "KC_NO" , "KC_DEL",
"KC_LCTL", "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_VOLD",
"KC_PGDN", "KC_LEFT" , "KC_UP" , "KC_RGHT" , "KC_NO" , "KC_RCTL",
"KC_LSFT", "LCTL(KC_Z)", "LCTL(KC_X)" , "LCTL(KC_C)", "LCTL(KC_V)" , "LCTL(KC_Y)", "KC_MUTE",
"KC_ESC" , "KC_NO" , "LCTL(KC_LEFT)", "KC_DOWN" , "LCTL(KC_RGHT)", "KC_RALT" , "KC_RSFT",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"MO(6)" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_F12" , "KC_EXLM" , "KC_AT" , "KC_HASH" , "KC_DLR" , "KC_PERC",
"KC_CIRC", "KC_AMPR" , "KC_ASTR" , "KC_LPRN" , "KC_RPRN" , "KC_BSPC",
"KC_LCTL", "KC_F1" , "KC_F2" , "KC_F3" , "KC_F4" , "KC_F5",
"KC_PIPE", "KC_LSFT" , "KC_LCTL" , "KC_LALT" , "KC_LGUI" , "KC_RCTL",
"KC_LSFT", "KC_F6" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10" , "KC_F11",
"KC_ESC" , "KC_BSLS" , "KC_LBRC" , "KC_RBRC" , "KC_LCBR" , "KC_RCBR" , "KC_RSFT",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "MO(6)",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_NO" , "KC_MINS" , "KC_PLUS" , "KC_EQL" , "KC_SLSH" , "KC_ASTR",
"KC_COMM", "KC_7" , "KC_8" , "KC_9" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_NO",
"KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_UNDS" , "KC_RCTL",
"KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_DOT" , "KC_4" , "KC_5" , "KC_6" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO",
"KC_NO" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_NO" , "DF(0)" , "DF(1)" , "DF(2)" , "AG_SWAP" , "AG_NORM",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"RGB_MOD", "RGB_VAI" , "RGB_HUI" , "RGB_SAI" , "KC_NO" , "KC_NO",
"RESET" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"RGB_TOG", "RGB_RMOD" , "RGB_VAD" , "RGB_HUD" , "RGB_SAD" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO"
]
]
}

View file

@ -0,0 +1,216 @@
# Default Keymap
This default keymap follows many of the norms seen in non-programmable keyboards
to ease initial use of the Hillside keyboard.
It is a starting point for you to tweak over time to better suit _your_ preferences.
You can easily customize it with the
[QMK configurator](https://config.qmk.fm/#/hillside/0_1/LAYOUT)
or with the [via firmware](https://caniusevia.com).
Some of its key features are:
- A mostly standard base layer with letters, some symbols, shift, modifier and delete keys
in the expected places for non-programmable keyboards.
- QWERTY, Colemak-DH and Dvorak options for the letter and symbol layout.
- Comfortable modifier and function or symbol combinations on the non-base layers
using modifiers on the home row of the navigation/edit, symbol/function and number-pad layers.
- Word navigation and cut/copy/paste keys on the navigation layer.
- A slightly optimized number pad with the more frequently used numbers on the home row.
We've deliberately omitted some features:
- Combos: because the online configuration tools do not handle them
and because they would add to the initial learning curve,
as helpful to a keymap as a light sprinkling of combos can be.
- Multi-function mod-tap keys, auto shift capitalization and auto-exit modes such as CAPWORD or NUMWORD:
as they may be too large a step for someone new to programmable keyboards.
## Base Layer
```
| TAB | Q | W | E | R | T |---------------------------| Y | U | I | O | P | BKSPC |
| CTRL | A | S | D | F | G |---------------------------| H | J | K | L | ; | ' |
| SHIFT | Z | X | C | V | B | ~ |---------------| ESC | N | M | , | . | / | SHIFT |
--------------|ENTER|-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| APP |--------------
```
The base layer can be either of QWERTY, Colemak-DH or Dvorak,
with identical non-alpha and non-symbol keys.
QWERTY is the default.
A standard keyboard layout is used for:
- Tab, backspace and shift keys in the outer columns.
- Alt/option and GUI/command keys on both thumbs, with the location swappable for windows or mac.
- A space key on the right thumb.
The differences from a standard layout are:
- There are three additional "shift" keys
to access the navigation/editing, symbol/function, and number layers.
- Enter is on the left thumb or ring finger.
This location allowed preserving the more common right-hand keys.
Feel free to swap it with the quote key or have it share the right shift key
as a mod-tap key.
- Control is in the caps lock spot.
- Esc and `~ are above the thumbs.
- The rarer AltGr key is in a layer.
<details>
<summary>Details of Dvorak and Colemak-DH</summary>
In the Dvorak layout, the outer home row key is the "/?" symbols
so that the same 12 symbols are taken care of on the base layer.
```
Dvorak
| TAB | ' | , | . | P | Y |---------------------------| F | G | C | R | L | BKSPC |
| CTRL | A | O | E | U | I |---------------------------| D | H | T | N | S | / |
| SHIFT | ; | Q | J | K | X | ~ |---------------| ESC | B | M | W | V | Z | SHIFT |
--------------|ENTER|-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| APP |--------------
Colemak-DH
| TAB | Q | W | F | P | B |---------------------------| J | L | U | Y | ; | BKSPC |
| CTRL | A | R | S | T | G |---------------------------| M | N | E | I | O | ' |
| SHIFT | Z | X | C | D | V | ~ |---------------| ESC | K | H | , | . | / | SHIFT |
--------------|ENTER|-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| APP |--------------
```
</details>
## Navigation, Editing and Media Layer
```
| CAPS | INS | | | |VOL+ |---------------------------|PG_UP|HOME | | END| | DEL |
| CTRL | GUI | ALT |CTRL |SHIFT|VOL- |---------------------------|PG_DN|LEFT | UP |RIGHT| | CTRL |
| SHIFT |UNDO | CUT |COPY |PASTE|REDO |MUTE |---------------| ESC | |WORDL|DOWN |WORDR|RALT | SHIFT |
--------------|ENTER|-----| GUI | ALT | Num | *** |---| Adj |BSPC | ALT | GUI |-----| APP |--------------
```
Holding down the Nav key accesses a navigation and editing layer:
- Navigation arrows are on and below the right home row in a cross pattern.
This feels more natural for a column stagger keyboard than an inverted T.
The keys below that move left or right by a word.
Home, end, and page up/down are beside them.
- Modifiers in the left home row make it easier to use the arrows
to select text with the shift key or move between desktops or tabs.
- Editing keys appear on the lower left.
The edit keys, modifiers and arrows make it easy to move text around without leaving the layer.
- Delete is in the upper right, and a backspace key is on the thumb.
- The base layer modifiers and escape are in the same spots as on the base layer,
and a right-hand control key is added.
- Media volume and play keys are on the left, accessible with one hand.
- AltGr and caps lock fill out the layer.
- A few keys do nothing and are available for more user-specific needs.
## Symbol and Function Layer
```
| F12 | ! | @ | # | $ | % |---------------------------| ^ | & | * | ( | ) | BSPC |
| CTRL | F1 | F2 | F3 | F4 | F5 |---------------------------| | |SHIFT|CTRL | ALT | GUI | CTRL |
| SHIFT | F6 | F7 | F8 | F9 | F10 | F11 |---------------| ESC | \ | [ | ] | { | } | SHIFT |
--------------|ENTER|-----| GUI | ALT | Num | Adj |---| *** |SPACE| ALT | GUI |-----| APP |--------------
```
Holding down the Sym key accesses a layer of symbol and function keys:
- The symbols usually found on the number keys are in the top row.
If desired, you can use these positions for other things,
as the symbols are also accessible from the number pad layer with the shift key.
- The remaining symbols appear on the right.
- The function keys are on the left, beginning with two rows of five.
- A row of modifiers in the home row allows the comfortable creation of any modifier and function key combination.
- The base layer modifier and escape keys are still available, as is a right-hand control key.
## Number Pad and Algebraic Layer
```
| | - | + | = | / | * |---------------------------| . | 7 | 8 | 9 | | BSPC |
| CTRL | GUI | ALT |CTRL |SHIFT| |---------------------------| 0 | 1 | 2 | 3 | _ | CTRL |
| SHIFT | | | | | | |---------------| ESC | , | 4 | 5 | 6 | | SHIFT |
--------------|ENTER|-----| GUI | ALT | *** | |---| |BSPC | ALT | GUI |-----| APP |--------------
```
Holding down the Num key accesses a number pad and arithmetic symbols:
- The number pad has the lowest numbers swapped into the home row as these are the most commonly used.
- A row of modifiers in the home row allows the comfortable creation of any modifier and number combination.
- Symbols commonly used with numbers fill out the layer
and can be combined with the home row mods or the existing base layer modifiers on the right hand.
- Several keys remain unused and await more user-specific needs.
## Adjust Layer
```
| |QWERT|DVORK|COLMK|AG_SWAP|AG_NORM|-----------------------| | | | | | |
| | | | | | |---------------------------|MOD+ |BRI+ |HUE+ |SAT+ | | |
| RESET | | | | | | |--------------|RGBTOG|MOD- |BRI- |HUE- |SAT- | | |
--------------| |-----| | | | *** |---| *** | | | |-----| |--------------
```
Simultaneously holding down the Nav and Sym keys enables keys to adjust various keyboard settings:
- The base layer can be set to QWERTY, Colemak-DH or Dvorak,
but the keyboard reverts to QWERTY each time it is plugged in.
- Alt/option and GUI/command can be swapped for mac users or restored to the windows norm.
This setting persists over power loss.
- The backlight LEDs can be enabled, disabled, and controlled.
These settings also persist over power loss.
## Make it Yours
If you are coming from a traditional keyboard,
with a row-staggered layout and a large set of physical keys,
learning to use a column staggered (ergo) and layer-based keyboard,
which uses layers instead of finger reaches to access numbers, symbols and functions,
will be an adjustment for your muscle memory and your mental keyboard map.
This default layout tries to simplify that adjustment by keeping things in the expected spots when possible.
Yet this layout is only a decent compromise and is not optimal for each user.
The online configurator makes it easy to tweak this layout to your needs.
You can add additional layers or completely switch around what these do.
Some changes you might consider making:
- Put some of your most-used key combinations on the unused keys on the navigation layer.
- If you are on a mac, switch the editing and word navigation keys from ctrl-x to cmd-x.
- Change the shift keys to one-shot shift keys,
where pressing and releasing them shifts the next key pressed.
That is much easier on your hands than holding them down.
Yet, they can still be held as usual if desired.
- Instead of holding down the thumb key to keep the symbol layer active,
you could use a one-shot layer key.
One-shot modifiers are likely less stress on your hands and may even be faster.
You would still be able to hold it down instead.
- Instead of holding down the key for the number pad layer,
you could make it a layer toggle, like caps lock is a capitalization toggle key.
Here are some other keymaps for inspiration and ideas:
- The [Ferris default](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ferris/keymaps/default) uses more advanced features as it has far fewer keys to work with.
- The [Miryoku](https://github.com/manna-harbour/miryoku/tree/master/docs/reference) keymap ensures that all modifiers are comfortably available with each character key.
- The [Kyria default](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/kyria/keymaps/default) has different keymap choices and a couple more keys.
A good metaphor is to think of your keymap as a bonsai tree that you tweak slightly over time
in response to ideas of how it might serve you better.
## Why no keymap.c
Via and the online configurator provide straightforward visual ways to work with a simple layout,
and both use a .json keymap format.
So this default ```keymap.json``` was created with the online configurator
and formatted for easier reading and editing.
If you wish, you can edit the ```keymap.json``` directly in a text editor, optionally use the below ```json2hill.py``` to restore the spacing, and then compile and flash it.
Or, you can use the graphical configurator to edit the keymap. To do that:
- Open the [QMK configurator](https://config.qmk.fm/#/handwired/hillside/LAYOUT)
- Using the green up arrow button, load the keymap from ```qmk_firmware/keyboards/handwired/hillside/keymaps/default/keymap.json```
- Make the changes you wish to the layout
- Save the keymap using the green down arrow button.
- Copy those changes back into your QMK repository and reformat for easy reading using the format script:
```
./keyboards/handwired/hillside/keymaps/json2hill.py --input <Your download directory>/default.json > ./keyboards/handwired/hillside/keymaps/default/keymap.json
```
You may need to make that script executable with ```chmod +x```. After your keymap is safely copied and formated, you may want to remove the keymap from your download directory so later downloads will automatically receive the same file name.
After either method of editing, compile and flash the keymap as usual.
You can combine a .json based keymap with more advanced features specified in .c files
with a bit more complexity.
For example, see
[pierrec83's Kyria map](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/kyria/keymaps/pierrec83).

View file

@ -0,0 +1,136 @@
#!/usr/bin/env python3
# Copyright 2020-2021 Pierre Viseu Chevalier, Michael McCoyd (@pierrechevalier83, @mmccoyd)
# SPDX-License-Identifier: GPL-2.0-or-later
"""Pretty print keymap json in more readable row/side organized format."""
import argparse
import json
import sys
from typing import NamedTuple
"""Print keymap json in row and side format, though as still re-readable json.
For example, for one layer:
["KC_TAB" , "KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T",
"KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_S" , "KC_D" , "KC_F" , "KC_G",
"KC_H" , "KC_J" , "KC_K" , "KC_L" , "KC_SCLN", "KC_QUOT",
"KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_V" , "KC_B" , "KC_GRV",
"KC_ESC" , "KC_N" , "KC_M" , "KC_COMM", "KC_DOT" , "KC_SLSH", "KC_RSFT",
"KC_ENT" , "KC_LGUI", "KC_LALT", "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT", "KC_RGUI", "KC_APP"
],
"""
indent_level=4 # number of spaces of initial indent per output line
# The structure of the keymap
# [[Endpoint of sides with identical widths, side width, mapping to column],...]
KEYS_TO_COL = [[24, 6, lambda n: n % 6],
[38, 7, lambda n: (n - 24) % 7],
[48, 5, lambda n: (n - 38) % 5]]
LAST_KEY = KEYS_TO_COL[-1][0] - 1
def parse_cli():
parser = argparse.ArgumentParser(description='Hillside keymap formatter')
parser.add_argument("--input", type=argparse.FileType('r'),
default=sys.stdin, help="Input keymap "
"(json file produced by qmk configurator)")
return parser.parse_args()
class Column(NamedTuple):
"""Column number within keymap side, if it ends side, and ends row.
Position within a keyboard row runs from 0 to n and again 0 to n"""
num: int
ends_side: bool
ends_row: bool
def get_col(key_index):
"""Return Column for key_index."""
for keys, num_cols, col_fn in KEYS_TO_COL:
if key_index < keys:
col_num = col_fn(key_index)
return Column(col_num,
ends_side=col_num == num_cols - 1,
ends_row=(keys - 1 - key_index) % (2 * num_cols) == 0)
def format_layers(layers):
formatted = indent_level * " " + "\"layers\": [\n"
# Find max key length per column
max_key_length = {}
for layer in layers:
for (index, keycode) in enumerate(layer):
col = get_col(index)
max_length = max_key_length.get(col.num)
if (not max_length) or len(keycode) > max_length:
max_key_length.update({col.num: len(keycode)})
# Format each layer
for (layer_index, layer) in enumerate(layers):
# Opening [
formatted += 2 * indent_level * " "
formatted += "["
# Split keys into pairs of left and right rows by key row length
for (index, keycode) in enumerate(layer):
col = get_col(index)
# Indent for rows past first
if col.num == 0 and index != 0:
formatted += (1 + 2 * indent_level) * " "
# Print key
formatted += json.dumps(keycode)
# End layer, or end side, or space to next key
if index == LAST_KEY:
formatted += "\n"
elif col.ends_side:
formatted += ",\n"
else:
n_spaces = max_key_length[get_col(index).num] - len(keycode)
formatted += n_spaces * " "
formatted += ", "
# Split groups of row sides
if col.ends_row:
formatted += "\n"
# Closing ] with , or without
formatted += 2 * indent_level * " "
if layer_index < len(layers) - 1:
formatted += "],\n"
else:
formatted += "]\n"
formatted += indent_level * " "
formatted += "]"
return formatted
def format_keymap(keymap_json):
formatted = "{"
for (index, k) in enumerate(keymap_json):
if k == "layers":
formatted += format_layers(keymap_json[k])
else:
formatted += f"{indent_level * ' '}{json.dumps(k)}: {json.dumps(keymap_json[k])}"
if index < len(keymap_json) - 1:
formatted += ","
formatted += "\n"
formatted += "}"
return formatted
def main():
args=parse_cli()
keymap_json = json.loads(args.input.read())
print(format_keymap(keymap_json))
main()

View file

@ -0,0 +1,101 @@
{
"version": 1,
"notes": "",
"keyboard": "handwired/hillside/0_1",
"author": "@mmccoyd",
"keymap": "via",
"layout": "LAYOUT",
"layers": [
["KC_TAB" , "KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T",
"KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_S" , "KC_D" , "KC_F" , "KC_G",
"KC_H" , "KC_J" , "KC_K" , "KC_L" , "KC_SCLN" , "KC_QUOT",
"KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_V" , "KC_B" , "KC_GRV",
"KC_ESC" , "KC_N" , "KC_M" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_TAB" , "KC_QUOT" , "KC_COMM" , "KC_DOT" , "KC_P" , "KC_Y",
"KC_F" , "KC_G" , "KC_C" , "KC_R" , "KC_L" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_O" , "KC_E" , "KC_U" , "KC_I",
"KC_D" , "KC_H" , "KC_T" , "KC_N" , "KC_S" , "KC_SLSH",
"KC_LSFT", "KC_SCLN" , "KC_Q" , "KC_J" , "KC_K" , "KC_X" , "KC_GRV",
"KC_ESC" , "KC_B" , "KC_M" , "KC_W" , "KC_V" , "KC_Z" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_TAB" , "KC_Q" , "KC_W" , "KC_F" , "KC_P" , "KC_B",
"KC_J" , "KC_L" , "KC_U" , "KC_Y" , "KC_SCLN" , "KC_BSPC",
"KC_LCTL", "KC_A" , "KC_R" , "KC_S" , "KC_T" , "KC_G",
"KC_M" , "KC_N" , "KC_E" , "KC_I" , "KC_O" , "KC_QUOT",
"KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_D" , "KC_V" , "KC_GRV",
"KC_ESC" , "KC_K" , "KC_H" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT",
"KC_ENT" , "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)",
"MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_APP"
],
["KC_CAPS", "KC_INS" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_VOLU",
"KC_PGUP", "KC_HOME" , "KC_NO" , "KC_END" , "KC_NO" , "KC_DEL",
"KC_LCTL", "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_VOLD",
"KC_PGDN", "KC_LEFT" , "KC_UP" , "KC_RGHT" , "KC_NO" , "KC_RCTL",
"KC_LSFT", "LCTL(KC_Z)", "LCTL(KC_X)" , "LCTL(KC_C)", "LCTL(KC_V)" , "LCTL(KC_Y)", "KC_MUTE",
"KC_ESC" , "KC_NO" , "LCTL(KC_LEFT)", "KC_DOWN" , "LCTL(KC_RGHT)", "KC_RALT" , "KC_RSFT",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"MO(6)" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_F12" , "KC_EXLM" , "KC_AT" , "KC_HASH" , "KC_DLR" , "KC_PERC",
"KC_CIRC", "KC_AMPR" , "KC_ASTR" , "KC_LPRN" , "KC_RPRN" , "KC_BSPC",
"KC_LCTL", "KC_F1" , "KC_F2" , "KC_F3" , "KC_F4" , "KC_F5",
"KC_PIPE", "KC_LSFT" , "KC_LCTL" , "KC_LALT" , "KC_LGUI" , "KC_RCTL",
"KC_LSFT", "KC_F6" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10" , "KC_F11",
"KC_ESC" , "KC_BSLS" , "KC_LBRC" , "KC_RBRC" , "KC_LCBR" , "KC_RCBR" , "KC_RSFT",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "MO(6)",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_NO" , "KC_MINS" , "KC_PLUS" , "KC_EQL" , "KC_SLSH" , "KC_ASTR",
"KC_COMM", "KC_7" , "KC_8" , "KC_9" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_NO",
"KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_UNDS" , "KC_RCTL",
"KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_DOT" , "KC_4" , "KC_5" , "KC_6" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO",
"KC_NO" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS"
],
["KC_NO" , "DF(0)" , "DF(1)" , "DF(2)" , "AG_SWAP" , "AG_NORM",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"RGB_MOD", "RGB_VAI" , "RGB_HUI" , "RGB_SAI" , "KC_NO" , "KC_NO",
"RESET" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO",
"RGB_TOG", "RGB_RMOD" , "RGB_VAD" , "RGB_HUD" , "RGB_SAD" , "KC_NO" , "KC_NO",
"KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_TRNS",
"KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO"
]
]
}

View file

@ -0,0 +1,29 @@
# Hillside
![hillside](https://imgur.com/XW0rX13.png)
[Hillside](https://github.com/mmccoyd/hillside)
is a split ergonomic keyboard
with 3x6+4+2 choc-spaced keys with aggressive column stagger,
a longer thumb arc and a breakoff outer-pinky column.
* Keyboard Maintainer: [Michael McCoyd](https://github.com/mmccoyd)
* Hardware Supported: ProMicro/Elite-C and compatible
* Hardware Availability: https://github.com/mmccoyd/hillside
Make example for this keyboard (after setting up your build environment):
make handwired/hillside/0_1:default
Flashing example for this keyboard:
make handwired/hillside/0_1:default:flash
## Bootloader
Enter the bootloader by either:
* **Physical reset button**: Briefly press the button on the front of the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).