From a972b262748efe977d9a0f8f47fdc36dc9c787e3 Mon Sep 17 00:00:00 2001 From: Jason Barnachea Date: Sat, 10 Feb 2018 14:24:54 -0800 Subject: [PATCH] Add JC65 ps2avrGB keyboard (#2351) * Adds JC65 ps2avrGB keyboard * Adds default keymap * Adds personal keymap * Backlight On/off support Migrated code from the BFake. Functionality only on BL_ON, BL_OFF, BL_TOGG. * Backlighting config adjustment Only 1 level supported. * Personal keymap update BL toggle added and RGB layer updates. * Renamed jc65 ps2avrgb directory Renamed directory for more clarity. * Default keymap and default rules * Personal keymap and personal rules * Group JC65 QMK and PS2 versions Group JC65 QMK and PS2 versions, Split directories, Readme for parent folder. * Default keycaps and personal keymaps re-added Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and config.h * v32a default keymap rules Default to no. * RGB and Backlight default settings Set to yes. * Rules.mk defaults for personal keymap Rules.mk defaults for personal keymap * Revised keyboard readme make paths Revised. * Path correction * jc65 default folder set set default pcb to qmk version * default rules for v32a set to enable backlight and rgb by default. --- keyboards/jc65/jc65.c | 35 -- keyboards/jc65/jc65.h | 21 +- keyboards/jc65/readme.md | 18 +- keyboards/jc65/rules.mk | 69 +-- keyboards/jc65/v32a/config.h | 46 ++ keyboards/jc65/v32a/i2c.c | 106 +++++ keyboards/jc65/v32a/i2c.h | 27 ++ keyboards/jc65/v32a/keymaps/default/keymap.c | 11 + keyboards/jc65/v32a/keymaps/default/readme.md | 10 + keyboards/jc65/v32a/keymaps/default/rules.mk | 2 + keyboards/jc65/v32a/keymaps/naut/keymap.c | 81 ++++ keyboards/jc65/v32a/keymaps/naut/readme.md | 16 + keyboards/jc65/v32a/keymaps/naut/rules.mk | 2 + keyboards/jc65/v32a/matrix.c | 106 +++++ keyboards/jc65/v32a/readme.md | 24 ++ keyboards/jc65/v32a/rules.mk | 50 +++ keyboards/jc65/v32a/usbconfig.h | 396 ++++++++++++++++++ keyboards/jc65/v32a/v32a.c | 65 +++ keyboards/jc65/v32a/v32a.h | 58 +++ keyboards/jc65/{ => v32u4}/config.h | 0 .../jc65/{ => v32u4}/keymaps/coth/config.h | 0 .../jc65/{ => v32u4}/keymaps/coth/keymap.c | 2 +- .../jc65/{ => v32u4}/keymaps/coth/readme.md | 0 .../jc65/{ => v32u4}/keymaps/coth/rules.mk | 0 .../jc65/{ => v32u4}/keymaps/default/config.h | 0 .../jc65/{ => v32u4}/keymaps/default/keymap.c | 2 +- .../{ => v32u4}/keymaps/default/readme.md | 0 .../jc65/{ => v32u4}/keymaps/default/rules.mk | 0 .../keymaps/jetpacktuxedo/config.h | 0 .../keymaps/jetpacktuxedo/keymap.c | 2 +- .../keymaps/jetpacktuxedo/readme.md | 0 .../keymaps/jetpacktuxedo/rules.mk | 0 .../{ => v32u4}/keymaps/na7thana/config.h | 0 .../{ => v32u4}/keymaps/na7thana/keymap.c | 2 +- .../{ => v32u4}/keymaps/na7thana/readme.md | 0 .../{ => v32u4}/keymaps/na7thana/rules.mk | 0 keyboards/jc65/v32u4/readme.md | 22 + keyboards/jc65/v32u4/rules.mk | 68 +++ keyboards/jc65/v32u4/v32u4.c | 36 ++ keyboards/jc65/v32u4/v32u4.h | 21 + 40 files changed, 1164 insertions(+), 134 deletions(-) create mode 100644 keyboards/jc65/v32a/config.h create mode 100644 keyboards/jc65/v32a/i2c.c create mode 100644 keyboards/jc65/v32a/i2c.h create mode 100644 keyboards/jc65/v32a/keymaps/default/keymap.c create mode 100644 keyboards/jc65/v32a/keymaps/default/readme.md create mode 100644 keyboards/jc65/v32a/keymaps/default/rules.mk create mode 100644 keyboards/jc65/v32a/keymaps/naut/keymap.c create mode 100644 keyboards/jc65/v32a/keymaps/naut/readme.md create mode 100644 keyboards/jc65/v32a/keymaps/naut/rules.mk create mode 100644 keyboards/jc65/v32a/matrix.c create mode 100644 keyboards/jc65/v32a/readme.md create mode 100644 keyboards/jc65/v32a/rules.mk create mode 100644 keyboards/jc65/v32a/usbconfig.h create mode 100644 keyboards/jc65/v32a/v32a.c create mode 100644 keyboards/jc65/v32a/v32a.h rename keyboards/jc65/{ => v32u4}/config.h (100%) rename keyboards/jc65/{ => v32u4}/keymaps/coth/config.h (100%) rename keyboards/jc65/{ => v32u4}/keymaps/coth/keymap.c (99%) rename keyboards/jc65/{ => v32u4}/keymaps/coth/readme.md (100%) rename keyboards/jc65/{ => v32u4}/keymaps/coth/rules.mk (100%) rename keyboards/jc65/{ => v32u4}/keymaps/default/config.h (100%) rename keyboards/jc65/{ => v32u4}/keymaps/default/keymap.c (97%) rename keyboards/jc65/{ => v32u4}/keymaps/default/readme.md (100%) rename keyboards/jc65/{ => v32u4}/keymaps/default/rules.mk (100%) rename keyboards/jc65/{ => v32u4}/keymaps/jetpacktuxedo/config.h (100%) rename keyboards/jc65/{ => v32u4}/keymaps/jetpacktuxedo/keymap.c (99%) rename keyboards/jc65/{ => v32u4}/keymaps/jetpacktuxedo/readme.md (100%) rename keyboards/jc65/{ => v32u4}/keymaps/jetpacktuxedo/rules.mk (100%) rename keyboards/jc65/{ => v32u4}/keymaps/na7thana/config.h (100%) rename keyboards/jc65/{ => v32u4}/keymaps/na7thana/keymap.c (98%) rename keyboards/jc65/{ => v32u4}/keymaps/na7thana/readme.md (100%) rename keyboards/jc65/{ => v32u4}/keymaps/na7thana/rules.mk (100%) create mode 100644 keyboards/jc65/v32u4/readme.md create mode 100644 keyboards/jc65/v32u4/rules.mk create mode 100644 keyboards/jc65/v32u4/v32u4.c create mode 100644 keyboards/jc65/v32u4/v32u4.h diff --git a/keyboards/jc65/jc65.c b/keyboards/jc65/jc65.c index 6f51c0d6e6..a4bd868747 100644 --- a/keyboards/jc65/jc65.c +++ b/keyboards/jc65/jc65.c @@ -1,36 +1 @@ #include "jc65.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0x1234 +#define PRODUCT_ID 0x5679 +#define MANUFACTURER winkeyless.kr +#define PRODUCT JC65 PS2AVRGB + +/* matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +#define NO_BACKLIGHT_CLOCK +#define BACKLIGHT_LEVELS 1 +#define RGBLED_NUM 16 +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 + +#define NO_UART 1 + +/* key combination for command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +#endif diff --git a/keyboards/jc65/v32a/i2c.c b/keyboards/jc65/v32a/i2c.c new file mode 100644 index 0000000000..a4f9521352 --- /dev/null +++ b/keyboards/jc65/v32a/i2c.c @@ -0,0 +1,106 @@ +/* +Copyright 2016 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Please do not modify this file + +#include +#include + +#include "i2c.h" + +void i2c_set_bitrate(uint16_t bitrate_khz) { + uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); + if (bitrate_div >= 16) { + bitrate_div = (bitrate_div - 16) / 2; + } + TWBR = bitrate_div; +} + +void i2c_init(void) { + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + i2c_set_bitrate(400); + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +} + +uint8_t i2c_start(uint8_t address) { + // reset TWI control register + TWCR = 0; + + // begin transmission and wait for it to end + TWCR = (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Please do not modify this file + +#ifndef __I2C_H__ +#define __I2C_H__ + +void i2c_init(void); +void i2c_set_bitrate(uint16_t bitrate_khz); +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); + +#endif diff --git a/keyboards/jc65/v32a/keymaps/default/keymap.c b/keyboards/jc65/v32a/keymaps/default/keymap.c new file mode 100644 index 0000000000..de7a7135af --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include "v32a.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSLS,KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT,KC_PGUP, + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,KC_PGDN, + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT,KC_RGUI,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT + ), +}; diff --git a/keyboards/jc65/v32a/keymaps/default/readme.md b/keyboards/jc65/v32a/keymaps/default/readme.md new file mode 100644 index 0000000000..61e55f3ce8 --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/default/readme.md @@ -0,0 +1,10 @@ +Default Keymap +======= + +Default plain keymap with only a base layer. + +Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx) + +Difference from base layout: None. + +Intended usage: Reference layout. diff --git a/keyboards/jc65/v32a/keymaps/default/rules.mk b/keyboards/jc65/v32a/keymaps/default/rules.mk new file mode 100644 index 0000000000..d7463419b4 --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes diff --git a/keyboards/jc65/v32a/keymaps/naut/keymap.c b/keyboards/jc65/v32a/keymaps/naut/keymap.c new file mode 100644 index 0000000000..90c5a221be --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/naut/keymap.c @@ -0,0 +1,81 @@ +#include "v32a.h" + +// Define Layers +#define _BASE 0 +#define _FNX 1 +#define _MAC 2 +#define _RGB 3 + +// Define Macros +#define M_PRTS M(0) +#define M_PRTA M(1) +#define M_MSSN M(2) +#define M_APPS M(3) +#define M_SPOT M(4) +#define M_LEFT M(5) +#define M_RGHT M(6) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Base Layer + [_BASE] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_BSPC, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_NO, KC_ENT,KC_PGUP, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,KC_PGDN, + MO(1),KC_LALT,KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_NO,KC_RALT,KC_LEFT,KC_DOWN,KC_RGHT + ), + // Fn Layer + [_FNX] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,KC_TRNS, TG(3), + KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TG(2),KC_VOLU,KC_MPLY, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_VOLD,KC_MFFD + ), + // Mac Layer + [_MAC] = KEYMAP( + TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT, KC_NO, KC_NO, + KC_TRNS, M_PRTS, M_PRTA,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TO(0), M_MSSN,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, M_SPOT, M_SPOT, M_SPOT, KC_TRNS,KC_TRNS,KC_TRNS, M_LEFT, M_APPS, M_RGHT + ), + // RGB and BL Layer + [_RGB] = KEYMAP( + TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0), + KC_NO,RGB_HUD,RGB_HUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG, + KC_NO,RGB_SAD,RGB_SAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_TOG, + KC_NO, KC_NO,RGB_VAD,RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_MOD,RGB_RMOD, KC_NO,RGB_M_P,RGB_M_R, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_M_G,RGB_M_SW + ), +}; + +// The Macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch(id) { + case 0: + return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); //Mac print screen + break; + case 1: + return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); //Mac print area + break; + case 2: + return MACRO(D(LCTL), T(UP), U(LCTL), END); //Mac mission control + break; + case 3: + return MACRO(D(LCTL), T(DOWN), U(LCTL), END); //Mac applications + break; + case 4: + return MACRO(D(LGUI), T(SPC), U(LGUI), END); //Mac spotlight search + break; + case 5: + return MACRO(D(LCTL), T(LEFT), U(LCTL), END); //Mac mission left + break; + case 6: + return MACRO(D(LGUI), T(RGHT), U(LGUI), END); //Mac mission right + break; + } + } + return MACRO_NONE; +}; \ No newline at end of file diff --git a/keyboards/jc65/v32a/keymaps/naut/readme.md b/keyboards/jc65/v32a/keymaps/naut/readme.md new file mode 100644 index 0000000000..e7d1096666 --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/naut/readme.md @@ -0,0 +1,16 @@ +Naut's Keymap +======= + +Layer 1: HHKB Split backspace, 6.25u space, control on caps, Fn on L-Ctl. + +Layer 2: F Row on numrow, caps on tab, media shortcuts on arrows + +Layer 3: Mac Media buttons on numrow + +Layer 4: RGB control + +Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx) + +Difference from base layout: HHKBish layout. HHKB Fn layer. Mac media layer. RGB control layer. + +Intended usage: Daily driver for keyboard peacocking. diff --git a/keyboards/jc65/v32a/keymaps/naut/rules.mk b/keyboards/jc65/v32a/keymaps/naut/rules.mk new file mode 100644 index 0000000000..d7463419b4 --- /dev/null +++ b/keyboards/jc65/v32a/keymaps/naut/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes diff --git a/keyboards/jc65/v32a/matrix.c b/keyboards/jc65/v32a/matrix.c new file mode 100644 index 0000000000..57aa36b5ff --- /dev/null +++ b/keyboards/jc65/v32a/matrix.c @@ -0,0 +1,106 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include + +#include "matrix.h" + +#ifndef DEBOUNCE +#define DEBOUNCE 5 +#endif + +static uint8_t debouncing = DEBOUNCE; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +void matrix_init(void) { + // all outputs for rows high + DDRB = 0xFF; + PORTB = 0xFF; + // all inputs for columns + DDRA = 0x00; + DDRC &= ~(0x111111<<2); + DDRD &= ~(1<> 1) & 0x55) | ((x << 1) & 0xaa); + x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); + x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); + return x; +} + +uint8_t matrix_scan(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_set_row_status(row); + _delay_us(5); + + matrix_row_t cols = ( + // cols 0..7, PORTA 0 -> 7 + (~PINA) & 0xFF + ) | ( + // cols 8..13, PORTC 7 -> 0 + bit_reverse((~PINC) & 0xFF) << 8 + ) | ( + // col 14, PORTD 7 + ((~PIND) & (1 << PIND7)) << 7 + ); + + if (matrix_debouncing[row] != cols) { + matrix_debouncing[row] = cols; + debouncing = DEBOUNCE; + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_user(); + + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { +} diff --git a/keyboards/jc65/v32a/readme.md b/keyboards/jc65/v32a/readme.md new file mode 100644 index 0000000000..976217f108 --- /dev/null +++ b/keyboards/jc65/v32a/readme.md @@ -0,0 +1,24 @@ +JC65 ps2avrGB +======= + +A 65% keyboard with RGB + +Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx) + +Hardware Supported: JC65 rev.ps2avrgb + +Hardware Availability: [keyclack.com](https://keyclack.com/) + +The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens. + +These docs are for the PS2AVRGB version of the PCB. More info on qmk.fm + +Make example for this keyboard (after setting up your build environment): + + make jc65/v32a:default + +Flash example for this keyboard: + + bootloadHID -r jc65_v32a_default.hex + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file diff --git a/keyboards/jc65/v32a/rules.mk b/keyboards/jc65/v32a/rules.mk new file mode 100644 index 0000000000..1ea19fe00e --- /dev/null +++ b/keyboards/jc65/v32a/rules.mk @@ -0,0 +1,50 @@ +# Copyright 2017 Luiz Ribeiro +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# MCU name +MCU = atmega32a +PROTOCOL = VUSB + +# unsupported features for now +NO_UART = yes +NO_SUSPEND_POWER_DOWN = yes + +# processor frequency +F_CPU = 12000000 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + +# build options +BOOTMAGIC_ENABLE = yes +MOUSEKEY_ENABLE = yes +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = yes +BACKLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes + +OPT_DEFS = -DDEBUG_LEVEL=0 + +# custom matrix setup +CUSTOM_MATRIX = yes +SRC = matrix.c i2c.c + +# programming options +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/jc65/v32a/usbconfig.h b/keyboards/jc65/v32a/usbconfig.h new file mode 100644 index 0000000000..d2d848fcdc --- /dev/null +++ b/keyboards/jc65/v32a/usbconfig.h @@ -0,0 +1,396 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ + */ + +#ifndef __usbconfig_h_included__ +#define __usbconfig_h_included__ + +#include "config.h" + +/* +General Description: +This file is an example configuration (with inline documentation) for the USB +driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is +also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may +wire the lines to any other port, as long as D+ is also wired to INT0 (or any +other hardware interrupt, as long as it is the highest level interrupt, see +section at the end of this file). +*/ + +/* ---------------------------- Hardware Config ---------------------------- */ + +#define USB_CFG_IOPORTNAME D +/* This is the port where the USB bus is connected. When you configure it to + * "B", the registers PORTB, PINB and DDRB will be used. + */ +#define USB_CFG_DMINUS_BIT 3 +/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. + * This may be any bit in the port. + */ +#define USB_CFG_DPLUS_BIT 2 +/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. + * This may be any bit in the port. Please note that D+ must also be connected + * to interrupt pin INT0! [You can also use other interrupts, see section + * "Optional MCU Description" below, or you can connect D- to the interrupt, as + * it is required if you use the USB_COUNT_SOF feature. If you use D- for the + * interrupt, the USB interrupt will also be triggered at Start-Of-Frame + * markers every millisecond.] + */ +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, + * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code + * require no crystal, they tolerate +/- 1% deviation from the nominal + * frequency. All other rates require a precision of 2000 ppm and thus a + * crystal! + * Since F_CPU should be defined to your actual clock rate anyway, you should + * not need to modify this setting. + */ +#define USB_CFG_CHECK_CRC 0 +/* Define this to 1 if you want that the driver checks integrity of incoming + * data packets (CRC checks). CRC checks cost quite a bit of code size and are + * currently only available for 18 MHz crystal clock. You must choose + * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. + */ + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME D */ +/* If you connect the 1.5k pullup resistor from D- to a port pin instead of + * V+, you can connect and disconnect the device from firmware by calling + * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). + * This constant defines the port on which the pullup resistor is connected. + */ +/* #define USB_CFG_PULLUP_BIT 4 */ +/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined + * above) where the 1.5k pullup resistor is connected. See description + * above for details. + */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 +/* Define this to 1 if you want to compile a version with two endpoints: The + * default control endpoint 0 and an interrupt-in endpoint (any other endpoint + * number). + */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 3 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP3_NUMBER 3 +/* If the so-called endpoint 3 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 3. + */ +/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ +/* The above macro defines the startup condition for data toggling on the + * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. + * Since the token is toggled BEFORE sending any data, the first packet is + * sent with the oposite value of this configuration! + */ +#define USB_CFG_IMPLEMENT_HALT 0 +/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature + * for endpoint 1 (interrupt endpoint). Although you may not need this feature, + * it is required by the standard. We have made it a config option because it + * bloats the code considerably. + */ +#define USB_CFG_SUPPRESS_INTR_CODE 0 +/* Define this to 1 if you want to declare interrupt-in endpoints, but don't + * want to send any data over them. If this macro is defined to 1, functions + * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if + * you need the interrupt-in endpoints in order to comply to an interface + * (e.g. HID), but never want to send any data. This option saves a couple + * of bytes in flash memory and the transmit buffers in RAM. + */ +#define USB_CFG_INTR_POLL_INTERVAL 1 +/* If you compile a version with endpoint 1 (interrupt-in), this is the poll + * interval. The value is in milliseconds and must not be less than 10 ms for + * low speed devices. + */ +#define USB_CFG_IS_SELF_POWERED 0 +/* Define this to 1 if the device has its own power supply. Set it to 0 if the + * device is powered from the USB bus. + */ +#define USB_CFG_MAX_BUS_POWER 500 +/* Set this variable to the maximum USB bus power consumption of your device. + * The value is in milliamperes. [It will be divided by two since USB + * communicates power requirements in units of 2 mA.] + */ +#define USB_CFG_IMPLEMENT_FN_WRITE 1 +/* Set this to 1 if you want usbFunctionWrite() to be called for control-out + * transfers. Set it to 0 if you don't need it and want to save a couple of + * bytes. + */ +#define USB_CFG_IMPLEMENT_FN_READ 0 +/* Set this to 1 if you need to send control replies which are generated + * "on the fly" when usbFunctionRead() is called. If you only want to send + * data from a static buffer, set it to 0 and return the data from + * usbFunctionSetup(). This saves a couple of bytes. + */ +#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 +/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. + * You must implement the function usbFunctionWriteOut() which receives all + * interrupt/bulk data sent to any endpoint other than 0. The endpoint number + * can be found in 'usbRxToken'. + */ +#define USB_CFG_HAVE_FLOWCONTROL 0 +/* Define this to 1 if you want flowcontrol over USB data. See the definition + * of the macros usbDisableAllRequests() and usbEnableAllRequests() in + * usbdrv.h. + */ +#define USB_CFG_DRIVER_FLASH_PAGE 0 +/* If the device has more than 64 kBytes of flash, define this to the 64 k page + * where the driver's constants (descriptors) are located. Or in other words: + * Define this to 1 for boot loaders on the ATMega128. + */ +#define USB_CFG_LONG_TRANSFERS 0 +/* Define this to 1 if you want to send/receive blocks of more than 254 bytes + * in a single control-in or control-out transfer. Note that the capability + * for long transfers increases the driver size. + */ +/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ +/* This macro is a hook if you want to do unconventional things. If it is + * defined, it's inserted at the beginning of received message processing. + * If you eat the received message and don't want default processing to + * proceed, do a return after doing your things. One possible application + * (besides debugging) is to flash a status LED on each packet. + */ +/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ +/* This macro is a hook if you need to know when an USB RESET occurs. It has + * one parameter which distinguishes between the start of RESET state and its + * end. + */ +/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ +/* This macro (if defined) is executed when a USB SET_ADDRESS request was + * received. + */ +#define USB_COUNT_SOF 1 +/* define this macro to 1 if you need the global variable "usbSofCount" which + * counts SOF packets. This feature requires that the hardware interrupt is + * connected to D- instead of D+. + */ +/* #ifdef __ASSEMBLER__ + * macro myAssemblerMacro + * in YL, TCNT0 + * sts timer0Snapshot, YL + * endm + * #endif + * #define USB_SOF_HOOK myAssemblerMacro + * This macro (if defined) is executed in the assembler module when a + * Start Of Frame condition is detected. It is recommended to define it to + * the name of an assembler macro which is defined here as well so that more + * than one assembler instruction can be used. The macro may use the register + * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages + * immediately after an SOF pulse may be lost and must be retried by the host. + * What can you do with this hook? Since the SOF signal occurs exactly every + * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in + * designs running on the internal RC oscillator. + * Please note that Start Of Frame detection works only if D- is wired to the + * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! + */ +#define USB_CFG_CHECK_DATA_TOGGLING 0 +/* define this macro to 1 if you want to filter out duplicate data packets + * sent by the host. Duplicates occur only as a consequence of communication + * errors, when the host does not receive an ACK. Please note that you need to + * implement the filtering yourself in usbFunctionWriteOut() and + * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable + * for each control- and out-endpoint to check for duplicate packets. + */ +#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 +/* define this macro to 1 if you want the function usbMeasureFrameLength() + * compiled in. This function can be used to calibrate the AVR's RC oscillator. + */ +#define USB_USE_FAST_CRC 0 +/* The assembler module has two implementations for the CRC algorithm. One is + * faster, the other is smaller. This CRC routine is only used for transmitted + * messages where timing is not critical. The faster routine needs 31 cycles + * per byte while the smaller one needs 61 to 69 cycles. The faster routine + * may be worth the 32 bytes bigger code size if you transmit lots of data and + * run the AVR close to its limit. + */ + +/* -------------------------- Device Description --------------------------- */ + +#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) +/* USB vendor ID for the device, low byte first. If you have registered your + * own Vendor ID, define it here. Otherwise you may use one of obdev's free + * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) +/* This is the ID of the product, low byte first. It is interpreted in the + * scope of the vendor ID. If you have registered your own VID with usb.org + * or if you have licensed a PID from somebody else, define it here. Otherwise + * you may use one of obdev's free shared VID/PID pairs. See the file + * USB-IDs-for-free.txt for details! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +/* Version number of the device: Minor number first, then major number. + */ +#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' +#define USB_CFG_VENDOR_NAME_LEN 13 +/* These two values define the vendor name returned by the USB device. The name + * must be given as a list of characters under single quotes. The characters + * are interpreted as Unicode (UTF-16) entities. + * If you don't want a vendor name string, undefine these macros. + * ALWAYS define a vendor name containing your Internet domain name if you use + * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for + * details. + */ +#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' +#define USB_CFG_DEVICE_NAME_LEN 8 +/* Same as above for the device name. If you don't want a device name, undefine + * the macros. See the file USB-IDs-for-free.txt before you assign a name if + * you use a shared VID/PID. + */ +/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ +/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ +/* Same as above for the serial number. If you don't want a serial number, + * undefine the macros. + * It may be useful to provide the serial number through other means than at + * compile time. See the section about descriptor properties below for how + * to fine tune control over USB descriptors such as the string descriptor + * for the serial number. + */ +#define USB_CFG_DEVICE_CLASS 0 +#define USB_CFG_DEVICE_SUBCLASS 0 +/* See USB specification if you want to conform to an existing device class. + * Class 0xff is "vendor specific". + */ +#define USB_CFG_INTERFACE_CLASS 3 /* HID */ +#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ +#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ +/* See USB specification if you want to conform to an existing device class or + * protocol. The following classes must be set at interface level: + * HID class is 3, no subclass and protocol required (but may be useful!) + * CDC class is 2, use subclass 2 and protocol 1 for ACM + */ +#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 +/* Define this to the length of the HID report descriptor, if you implement + * an HID device. Otherwise don't define it or define it to 0. + * If you use this define, you must add a PROGMEM character array named + * "usbHidReportDescriptor" to your code which contains the report descriptor. + * Don't forget to keep the array and this define in sync! + */ + +/* #define USB_PUBLIC static */ +/* Use the define above if you #include usbdrv.c instead of linking against it. + * This technique saves a couple of bytes in flash memory. + */ + +/* ------------------- Fine Control over USB Descriptors ------------------- */ +/* If you don't want to use the driver's default USB descriptors, you can + * provide our own. These can be provided as (1) fixed length static data in + * flash memory, (2) fixed length static data in RAM or (3) dynamically at + * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more + * information about this function. + * Descriptor handling is configured through the descriptor's properties. If + * no properties are defined or if they are 0, the default descriptor is used. + * Possible properties are: + * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched + * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is + * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if + * you want RAM pointers. + * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found + * in static memory is in RAM, not in flash memory. + * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), + * the driver must know the descriptor's length. The descriptor itself is + * found at the address of a well known identifier (see below). + * List of static descriptor names (must be declared PROGMEM if in flash): + * char usbDescriptorDevice[]; + * char usbDescriptorConfiguration[]; + * char usbDescriptorHidReport[]; + * char usbDescriptorString0[]; + * int usbDescriptorStringVendor[]; + * int usbDescriptorStringDevice[]; + * int usbDescriptorStringSerialNumber[]; + * Other descriptors can't be provided statically, they must be provided + * dynamically at runtime. + * + * Descriptor properties are or-ed or added together, e.g.: + * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) + * + * The following descriptors are defined: + * USB_CFG_DESCR_PROPS_DEVICE + * USB_CFG_DESCR_PROPS_CONFIGURATION + * USB_CFG_DESCR_PROPS_STRINGS + * USB_CFG_DESCR_PROPS_STRING_0 + * USB_CFG_DESCR_PROPS_STRING_VENDOR + * USB_CFG_DESCR_PROPS_STRING_PRODUCT + * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER + * USB_CFG_DESCR_PROPS_HID + * USB_CFG_DESCR_PROPS_HID_REPORT + * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) + * + * Note about string descriptors: String descriptors are not just strings, they + * are Unicode strings prefixed with a 2 byte header. Example: + * int serialNumberDescriptor[] = { + * USB_STRING_DESCRIPTOR_HEADER(6), + * 'S', 'e', 'r', 'i', 'a', 'l' + * }; + */ + +#define USB_CFG_DESCR_PROPS_DEVICE 0 +#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 +#define USB_CFG_DESCR_PROPS_STRINGS 0 +#define USB_CFG_DESCR_PROPS_STRING_0 0 +#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID 0 +#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 +#define USB_CFG_DESCR_PROPS_UNKNOWN 0 + +#define usbMsgPtr_t unsigned short +/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to + * a scalar type here because gcc generates slightly shorter code for scalar + * arithmetics than for pointer arithmetics. Remove this define for backward + * type compatibility or define it to an 8 bit type if you use data in RAM only + * and all RAM is below 256 bytes (tiny memory model in IAR CC). + */ + +/* ----------------------- Optional MCU Description ------------------------ */ + +/* The following configurations have working defaults in usbdrv.h. You + * usually don't need to set them explicitly. Only if you want to run + * the driver on a device which is not yet supported or with a compiler + * which is not fully supported (such as IAR C) or if you use a differnt + * interrupt than INT0, you may have to define some of these. + */ +/* #define USB_INTR_CFG MCUCR */ +/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE GIMSK */ +/* #define USB_INTR_ENABLE_BIT INT0 */ +/* #define USB_INTR_PENDING GIFR */ +/* #define USB_INTR_PENDING_BIT INTF0 */ +/* #define USB_INTR_VECTOR INT0_vect */ + +/* Set INT1 for D- falling edge to count SOF */ +/* #define USB_INTR_CFG EICRA */ +#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE EIMSK */ +#define USB_INTR_ENABLE_BIT INT1 +/* #define USB_INTR_PENDING EIFR */ +#define USB_INTR_PENDING_BIT INTF1 +#define USB_INTR_VECTOR INT1_vect + +#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/jc65/v32a/v32a.c b/keyboards/jc65/v32a/v32a.c new file mode 100644 index 0000000000..621789423f --- /dev/null +++ b/keyboards/jc65/v32a/v32a.c @@ -0,0 +1,65 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "v32a.h" +#ifdef BACKLIGHT_ENABLE +#include "backlight.h" +#endif +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +#include + +#include "action_layer.h" +#include "i2c.h" +#include "quantum.h" + +extern rgblight_config_t rgblight_config; + +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + i2c_init(); + i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { + rgblight_task(); +} + +void backlight_init_ports(void) { + DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); + PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // Turn out the lights + PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + } else { + // Turn on the lights + PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); + } +} \ No newline at end of file diff --git a/keyboards/jc65/v32a/v32a.h b/keyboards/jc65/v32a/v32a.h new file mode 100644 index 0000000000..00464141b4 --- /dev/null +++ b/keyboards/jc65/v32a/v32a.h @@ -0,0 +1,58 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef V32A_H +#define V32A_H + +#include "quantum.h" + +#define KEYMAP( \ + K04,K14,K24,K34,K44,K54,K16,KB6,KB7,K17,KA4,KB4,KC4,KD4,KE4,KD0, \ + K03,K13,K23,K33,K43,K53,K26,KC6,KC7,K27,KA3,KB3,KC3, KD3,K67, \ + K02,K12,K22,K32,K42,K52,K36,KD6,KD7,K37,KA2,KB2,KC2, KD2,K87, \ + K01,K30,K11,K21,K31,K41,K51,K46,KE6,KE7,K47,KA1, KB1,K86,K77, \ + K00,K10,K20, K40,K56,K50, K57,KB0,KC0,K96,K76,K66 \ +){ \ + { K00, K10, K20, K30, K40, K50,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KB0, KC0, KD0,KC_NO,KC_NO }, \ + { K01, K11, K21, K31, K41, K51,KC_NO,KC_NO,KC_NO,KC_NO, KA1, KB1,KC_NO,KC_NO,KC_NO,KC_NO }, \ + { K02, K12, K22, K32, K42, K52,KC_NO,KC_NO,KC_NO,KC_NO, KA2, KB2, KC2, KD2,KC_NO,KC_NO }, \ + { K03, K13, K23, K33, K43, K53,KC_NO,KC_NO,KC_NO,KC_NO, KA3, KB3, KC3, KD3,KC_NO,KC_NO }, \ + { K04, K14, K24, K34, K44, K54,KC_NO,KC_NO,KC_NO,KC_NO, KA4, KB4, KC4, KD4, KE4,KC_NO }, \ + { KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO }, \ + { KC_NO, K16, K26, K36, K46, K56, K66, K76, K86, K96,KC_NO, KB6, KC6, KD6, KE6,KC_NO }, \ + { KC_NO, K17, K27, K37, K47, K57, K67, K77, K87,KC_NO,KC_NO, KB7, KC7, KD7, KE7,KC_NO } \ +} + +#define KC_KEYMAP( \ + K04,K14,K24,K34,K44,K54,K16,KB6,KB7,K17,KA4,KB4,KC4,KD4,KE4,KD0, \ + K03,K13,K23,K33,K43,K53,K26,KC6,KC7,K27,KA3,KB3,KC3, KD3,K67, \ + K02,K12,K22,K32,K42,K52,K36,KD6,KD7,K37,KA2,KB2,KC2, KD2,K87, \ + K01,K30,K11,K21,K31,K41,K51,K46,KE6,KE7,K47,KA1, KB1,K86,K77, \ + K00,K10,K20, K40,K56,K50, K57,KB0,KC0,K96,K76,K66 \ +) \ +{ \ + { KC_##K00,KC_##K10,KC_##K20,KC_##K30,KC_##K40,KC_##K50, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_##KB0,KC_##KC0,KC_##KD0, KC_NO,KC_NO }, \ + { KC_##K01,KC_##K11,KC_##K21,KC_##K31,KC_##K41,KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO,KC_##KA1,KC_##KB1, KC_NO, KC_NO, KC_NO,KC_NO }, \ + { KC_##K02,KC_##K12,KC_##K22,KC_##K32,KC_##K42,KC_##K52, KC_NO, KC_NO, KC_NO, KC_NO,KC_##KA2,KC_##KB2,KC_##KC2,KC_##KD2, KC_NO,KC_NO }, \ + { KC_##K03,KC_##K13,KC_##K23,KC_##K33,KC_##K43,KC_##K53, KC_NO, KC_NO, KC_NO, KC_NO,KC_##KA3,KC_##KB3,KC_##KC3,KC_##KD3, KC_NO,KC_NO }, \ + { KC_##K04,KC_##K14,KC_##K24,KC_##K34,KC_##K44,KC_##K54, KC_NO, KC_NO, KC_NO, KC_NO,KC_##KA4,KC_##KB4,KC_##KC4,KC_##KD4,KC_##KE4,KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO }, \ + { KC_NO,KC_##K16,KC_##K26,KC_##K36,KC_##K46,KC_##K56,KC_##K66,KC_##K76,KC_##K86,KC_##K96, KC_NO,KC_##KB6,KC_##KC6,KC_##KD6,KC_##KE6,KC_NO }, \ + { KC_NO,KC_##K17,KC_##K27,KC_##K37,KC_##K47,KC_##K57,KC_##K67,KC_##K77,KC_##K87, KC_NO, KC_NO,KC_##KB7,KC_##KC7,KC_##KD7,KC_##KE7,KC_NO } \ +} + +#endif diff --git a/keyboards/jc65/config.h b/keyboards/jc65/v32u4/config.h similarity index 100% rename from keyboards/jc65/config.h rename to keyboards/jc65/v32u4/config.h diff --git a/keyboards/jc65/keymaps/coth/config.h b/keyboards/jc65/v32u4/keymaps/coth/config.h similarity index 100% rename from keyboards/jc65/keymaps/coth/config.h rename to keyboards/jc65/v32u4/keymaps/coth/config.h diff --git a/keyboards/jc65/keymaps/coth/keymap.c b/keyboards/jc65/v32u4/keymaps/coth/keymap.c similarity index 99% rename from keyboards/jc65/keymaps/coth/keymap.c rename to keyboards/jc65/v32u4/keymaps/coth/keymap.c index be7a98b85e..d6c1dacf5b 100644 --- a/keyboards/jc65/keymaps/coth/keymap.c +++ b/keyboards/jc65/v32u4/keymaps/coth/keymap.c @@ -1,4 +1,4 @@ -#include "jc65.h" +#include "v32u4.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( diff --git a/keyboards/jc65/keymaps/coth/readme.md b/keyboards/jc65/v32u4/keymaps/coth/readme.md similarity index 100% rename from keyboards/jc65/keymaps/coth/readme.md rename to keyboards/jc65/v32u4/keymaps/coth/readme.md diff --git a/keyboards/jc65/keymaps/coth/rules.mk b/keyboards/jc65/v32u4/keymaps/coth/rules.mk similarity index 100% rename from keyboards/jc65/keymaps/coth/rules.mk rename to keyboards/jc65/v32u4/keymaps/coth/rules.mk diff --git a/keyboards/jc65/keymaps/default/config.h b/keyboards/jc65/v32u4/keymaps/default/config.h similarity index 100% rename from keyboards/jc65/keymaps/default/config.h rename to keyboards/jc65/v32u4/keymaps/default/config.h diff --git a/keyboards/jc65/keymaps/default/keymap.c b/keyboards/jc65/v32u4/keymaps/default/keymap.c similarity index 97% rename from keyboards/jc65/keymaps/default/keymap.c rename to keyboards/jc65/v32u4/keymaps/default/keymap.c index de787f3892..9c9e0f1f8d 100644 --- a/keyboards/jc65/keymaps/default/keymap.c +++ b/keyboards/jc65/v32u4/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -#include "jc65.h" +#include "v32u4.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( diff --git a/keyboards/jc65/keymaps/default/readme.md b/keyboards/jc65/v32u4/keymaps/default/readme.md similarity index 100% rename from keyboards/jc65/keymaps/default/readme.md rename to keyboards/jc65/v32u4/keymaps/default/readme.md diff --git a/keyboards/jc65/keymaps/default/rules.mk b/keyboards/jc65/v32u4/keymaps/default/rules.mk similarity index 100% rename from keyboards/jc65/keymaps/default/rules.mk rename to keyboards/jc65/v32u4/keymaps/default/rules.mk diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/config.h b/keyboards/jc65/v32u4/keymaps/jetpacktuxedo/config.h similarity index 100% rename from keyboards/jc65/keymaps/jetpacktuxedo/config.h rename to keyboards/jc65/v32u4/keymaps/jetpacktuxedo/config.h diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c b/keyboards/jc65/v32u4/keymaps/jetpacktuxedo/keymap.c similarity index 99% rename from keyboards/jc65/keymaps/jetpacktuxedo/keymap.c rename to keyboards/jc65/v32u4/keymaps/jetpacktuxedo/keymap.c index af02b6f104..451b43124e 100644 --- a/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c +++ b/keyboards/jc65/v32u4/keymaps/jetpacktuxedo/keymap.c @@ -1,4 +1,4 @@ -#include "jc65.h" +#include "v32u4.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/readme.md b/keyboards/jc65/v32u4/keymaps/jetpacktuxedo/readme.md similarity index 100% rename from keyboards/jc65/keymaps/jetpacktuxedo/readme.md rename to keyboards/jc65/v32u4/keymaps/jetpacktuxedo/readme.md diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/rules.mk b/keyboards/jc65/v32u4/keymaps/jetpacktuxedo/rules.mk similarity index 100% rename from keyboards/jc65/keymaps/jetpacktuxedo/rules.mk rename to keyboards/jc65/v32u4/keymaps/jetpacktuxedo/rules.mk diff --git a/keyboards/jc65/keymaps/na7thana/config.h b/keyboards/jc65/v32u4/keymaps/na7thana/config.h similarity index 100% rename from keyboards/jc65/keymaps/na7thana/config.h rename to keyboards/jc65/v32u4/keymaps/na7thana/config.h diff --git a/keyboards/jc65/keymaps/na7thana/keymap.c b/keyboards/jc65/v32u4/keymaps/na7thana/keymap.c similarity index 98% rename from keyboards/jc65/keymaps/na7thana/keymap.c rename to keyboards/jc65/v32u4/keymaps/na7thana/keymap.c index 2f262efa90..2e61e95d36 100644 --- a/keyboards/jc65/keymaps/na7thana/keymap.c +++ b/keyboards/jc65/v32u4/keymaps/na7thana/keymap.c @@ -1,4 +1,4 @@ -#include "jc65.h" +#include "v32u4.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( diff --git a/keyboards/jc65/keymaps/na7thana/readme.md b/keyboards/jc65/v32u4/keymaps/na7thana/readme.md similarity index 100% rename from keyboards/jc65/keymaps/na7thana/readme.md rename to keyboards/jc65/v32u4/keymaps/na7thana/readme.md diff --git a/keyboards/jc65/keymaps/na7thana/rules.mk b/keyboards/jc65/v32u4/keymaps/na7thana/rules.mk similarity index 100% rename from keyboards/jc65/keymaps/na7thana/rules.mk rename to keyboards/jc65/v32u4/keymaps/na7thana/rules.mk diff --git a/keyboards/jc65/v32u4/readme.md b/keyboards/jc65/v32u4/readme.md new file mode 100644 index 0000000000..c6a2b2b8fd --- /dev/null +++ b/keyboards/jc65/v32u4/readme.md @@ -0,0 +1,22 @@ +JC65 +=== + +![JC65](https://imgur.com/a/C2oa5) + +The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens. + +These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/planck/) + +Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +Hardware Supported: JC65 rev.qmk +Hardware Availability: [keyclack.com](https://keyclack.com/) + +Make example for this keyboard (after setting up your build environment): + + make jc65/v32u4:default + +Or to make and flash: + + make jc65/v32u4:default:dfu + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/jc65/v32u4/rules.mk b/keyboards/jc65/v32u4/rules.mk new file mode 100644 index 0000000000..c2c02b6147 --- /dev/null +++ b/keyboards/jc65/v32u4/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/jc65/v32u4/v32u4.c b/keyboards/jc65/v32u4/v32u4.c new file mode 100644 index 0000000000..c69c5d5316 --- /dev/null +++ b/keyboards/jc65/v32u4/v32u4.c @@ -0,0 +1,36 @@ +#include "v32u4.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + if (usb_led & (1<