Rgb matrix fixes, I2C library can now retry if it has failed (#2943)
* Added Modular keyboards L,R and NUM Created code modules for the 3 modules of the modular keyboard. Original idea by MechboardsUK. Uses i2c implementation similar to lets split * Remove modular from master This is to fix incorrect branching * General fixes for RGB_matrix - Complited speed support for all effects - Fixed raindrop effects to initialized after toggle - Fixed raindrop effects to use all available LEDs - Fixed effect step reverse function - Moved RGB_MATRIX_SOLID_REACTIVE under correct flag * Documentation update for RGBmatrix * More doc updates * I2C library can now retry if it has failed - Replaced the original TWIlib by LFKeyboard's modified version - Allows for an extra argument on TWITransmitData, if blocking is set to 1 function will retry to transmit on failure. Good for noisy boards. * RGB Matrix, use alternative I2C library TWIlib seems to be hanging for me sometimes probably due to ISR routine. I have used i2c_master as a good alternative. Note: this commit is for Wilba6582 to verify before merge * Update rgb_matrix.c * RGB matrix cleanup - Remove TWIlib
This commit is contained in:
yiancar
Jack Humbert
parent
f42ec8aa86
commit
a98a91cf1b
7 changed files with 184 additions and 343 deletions
|
|
@ -117,7 +117,7 @@ endif
|
|||
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
|
||||
OPT_DEFS += -DRGB_MATRIX_ENABLE
|
||||
SRC += is31fl3731.c
|
||||
SRC += TWIlib.c
|
||||
SRC += i2c_master.c
|
||||
SRC += $(QUANTUM_DIR)/color.c
|
||||
SRC += $(QUANTUM_DIR)/rgb_matrix.c
|
||||
CIE1931_CURVE = yes
|
||||
|
|
|
|||
|
|
@ -1,232 +0,0 @@
|
|||
/*
|
||||
* TWIlib.c
|
||||
*
|
||||
* Created: 6/01/2014 10:41:33 PM
|
||||
* Author: Chris Herring
|
||||
* http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "TWIlib.h"
|
||||
#include "util/delay.h"
|
||||
|
||||
void TWIInit()
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWIInfo.repStart = 0;
|
||||
// Set pre-scalers (no pre-scaling)
|
||||
TWSR = 0;
|
||||
// Set bit rate
|
||||
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
|
||||
// Enable TWI and interrupt
|
||||
TWCR = (1 << TWIE) | (1 << TWEN);
|
||||
}
|
||||
|
||||
uint8_t isTWIReady()
|
||||
{
|
||||
if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
|
||||
{
|
||||
if (dataLen <= TXMAXBUFLEN)
|
||||
{
|
||||
// Wait until ready
|
||||
while (!isTWIReady()) {_delay_us(1);}
|
||||
// Set repeated start mode
|
||||
TWIInfo.repStart = repStart;
|
||||
// Copy data into the transmit buffer
|
||||
uint8_t *data = (uint8_t *)TXdata;
|
||||
for (int i = 0; i < dataLen; i++)
|
||||
{
|
||||
TWITransmitBuffer[i] = data[i];
|
||||
}
|
||||
// Copy transmit info to global variables
|
||||
TXBuffLen = dataLen;
|
||||
TXBuffIndex = 0;
|
||||
|
||||
// If a repeated start has been sent, then devices are already listening for an address
|
||||
// and another start does not need to be sent.
|
||||
if (TWIInfo.mode == RepeatedStartSent)
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
else // Otherwise, just send the normal start signal to begin transmission.
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWISendStart();
|
||||
}
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
return 1; // return an error if data length is longer than buffer
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
|
||||
{
|
||||
// Check if number of bytes to read can fit in the RXbuffer
|
||||
if (bytesToRead < RXMAXBUFLEN)
|
||||
{
|
||||
// Reset buffer index and set RXBuffLen to the number of bytes to read
|
||||
RXBuffIndex = 0;
|
||||
RXBuffLen = bytesToRead;
|
||||
// Create the one value array for the address to be transmitted
|
||||
uint8_t TXdata[1];
|
||||
// Shift the address and AND a 1 into the read write bit (set to write mode)
|
||||
TXdata[0] = (TWIaddr << 1) | 0x01;
|
||||
// Use the TWITransmitData function to initialize the transfer and address the slave
|
||||
TWITransmitData(TXdata, 1, repStart);
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
ISR (TWI_vect)
|
||||
{
|
||||
switch (TWI_STATUS)
|
||||
{
|
||||
// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
|
||||
case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
|
||||
// Set mode to Master Transmitter
|
||||
TWIInfo.mode = MasterTransmitter;
|
||||
case TWI_START_SENT: // Start condition has been transmitted
|
||||
case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
|
||||
if (TXBuffIndex < TXBuffLen) // If there is more data to send
|
||||
{
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
// This transmission is complete however do not release bus yet
|
||||
else if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MASTER RECEIVER ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
|
||||
// Switch to Master Receiver mode
|
||||
TWIInfo.mode = MasterReceiver;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// This transmission is complete however do not release bus yet
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MT and MR common ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
|
||||
case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
|
||||
case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
|
||||
case TWI_LOST_ARBIT: // Arbitration has been lost
|
||||
// Return error and send stop and set mode to ready
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
case TWI_REP_START_SENT: // Repeated start has been transmitted
|
||||
// Set the mode but DO NOT clear TWINT as the next data is not yet ready
|
||||
TWIInfo.mode = RepeatedStartSent;
|
||||
break;
|
||||
|
||||
// ----\/ ---- SLAVE RECEIVER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
|
||||
case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
|
||||
// Rather, it is there to be manually set between operations
|
||||
break;
|
||||
case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
|
||||
TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
|
||||
TWIInfo.mode = Ready;
|
||||
TWISendStop();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
|
@ -1,82 +0,0 @@
|
|||
/*
|
||||
* TWIlib.h
|
||||
*
|
||||
* Created: 6/01/2014 10:38:42 PM
|
||||
* Author: Chris Herring
|
||||
* http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/
|
||||
*/
|
||||
|
||||
|
||||
#ifndef TWILIB_H_
|
||||
#define TWILIB_H_
|
||||
// TWI bit rate (was 100000)
|
||||
#define TWI_FREQ 400000
|
||||
// Get TWI status
|
||||
#define TWI_STATUS (TWSR & 0xF8)
|
||||
// Transmit buffer length
|
||||
#define TXMAXBUFLEN 20
|
||||
// Receive buffer length
|
||||
#define RXMAXBUFLEN 20
|
||||
// Global transmit buffer
|
||||
uint8_t TWITransmitBuffer[TXMAXBUFLEN];
|
||||
// Global receive buffer
|
||||
volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
|
||||
// Buffer indexes
|
||||
volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
|
||||
int RXBuffIndex; // Current index in the receive buffer
|
||||
// Buffer lengths
|
||||
int TXBuffLen; // The total length of the transmit buffer
|
||||
int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
|
||||
|
||||
typedef enum {
|
||||
Ready,
|
||||
Initializing,
|
||||
RepeatedStartSent,
|
||||
MasterTransmitter,
|
||||
MasterReceiver,
|
||||
SlaceTransmitter,
|
||||
SlaveReciever
|
||||
} TWIMode;
|
||||
|
||||
typedef struct TWIInfoStruct{
|
||||
TWIMode mode;
|
||||
uint8_t errorCode;
|
||||
uint8_t repStart;
|
||||
}TWIInfoStruct;
|
||||
TWIInfoStruct TWIInfo;
|
||||
|
||||
|
||||
// TWI Status Codes
|
||||
#define TWI_START_SENT 0x08 // Start sent
|
||||
#define TWI_REP_START_SENT 0x10 // Repeated Start sent
|
||||
// Master Transmitter Mode
|
||||
#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received
|
||||
#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received
|
||||
#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received
|
||||
#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received
|
||||
// Master Receiver Mode
|
||||
#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received
|
||||
#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received
|
||||
#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned
|
||||
#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned
|
||||
|
||||
// Miscellaneous States
|
||||
#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost
|
||||
#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available
|
||||
#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected
|
||||
#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
|
||||
|
||||
|
||||
#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
|
||||
#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
|
||||
#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
|
||||
#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
|
||||
// Function declarations
|
||||
uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart);
|
||||
void TWIInit(void);
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
|
||||
uint8_t isTWIReady(void);
|
||||
|
||||
#endif // TWICOMMS_H_
|
||||
149
drivers/avr/i2c_master.c
Executable file
149
drivers/avr/i2c_master.c
Executable file
|
|
@ -0,0 +1,149 @@
|
|||
/* Library made by: g4lvanix
|
||||
* Github repository: https://github.com/g4lvanix/I2C-master-lib
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/twi.h>
|
||||
|
||||
#include "i2c_master.h"
|
||||
|
||||
#define F_SCL 400000UL // SCL frequency
|
||||
#define Prescaler 1
|
||||
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
|
||||
|
||||
void i2c_init(void)
|
||||
{
|
||||
TWBR = (uint8_t)TWBR_val;
|
||||
}
|
||||
|
||||
uint8_t i2c_start(uint8_t address)
|
||||
{
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
// transmit START condition
|
||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if((TWSR & 0xF8) != TW_START){ return 1; }
|
||||
|
||||
// load slave address into data register
|
||||
TWDR = address;
|
||||
// start transmission of address
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_write(uint8_t data)
|
||||
{
|
||||
// load data into data register
|
||||
TWDR = data;
|
||||
// start transmission of data
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
if( (TWSR & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_read_ack(void)
|
||||
{
|
||||
|
||||
// start TWI module and acknowledge data after reception
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
// return received data from TWDR
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
uint8_t i2c_read_nack(void)
|
||||
{
|
||||
|
||||
// start receiving without acknowledging reception
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
// return received data from TWDR
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(address | I2C_WRITE)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(address | I2C_READ)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(devaddr | 0x00)) return 1;
|
||||
|
||||
i2c_write(regaddr);
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(devaddr)) return 1;
|
||||
|
||||
i2c_write(regaddr);
|
||||
|
||||
if (i2c_start(devaddr | 0x01)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void i2c_stop(void)
|
||||
{
|
||||
// transmit STOP condition
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
}
|
||||
22
drivers/avr/i2c_master.h
Executable file
22
drivers/avr/i2c_master.h
Executable file
|
|
@ -0,0 +1,22 @@
|
|||
/* Library made by: g4lvanix
|
||||
* Github repository: https://github.com/g4lvanix/I2C-master-lib
|
||||
*/
|
||||
|
||||
#ifndef I2C_MASTER_H
|
||||
#define I2C_MASTER_H
|
||||
|
||||
#define I2C_READ 0x01
|
||||
#define I2C_WRITE 0x00
|
||||
|
||||
void i2c_init(void);
|
||||
uint8_t i2c_start(uint8_t address);
|
||||
uint8_t i2c_write(uint8_t data);
|
||||
uint8_t i2c_read_ack(void);
|
||||
uint8_t i2c_read_nack(void);
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
void i2c_stop(void);
|
||||
|
||||
#endif // I2C_MASTER_H
|
||||
|
|
@ -20,7 +20,7 @@
|
|||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include <string.h>
|
||||
#include "TWIlib.h"
|
||||
#include "i2c_master.h"
|
||||
#include "progmem.h"
|
||||
|
||||
// This is a 7-bit address, that gets left-shifted and bit 0
|
||||
|
|
@ -50,7 +50,7 @@
|
|||
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||
|
||||
// Transfer buffer for TWITransmitData()
|
||||
uint8_t g_twi_transfer_buffer[TXMAXBUFLEN];
|
||||
uint8_t g_twi_transfer_buffer[20];
|
||||
|
||||
// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
|
||||
// Storing them like this is optimal for I2C transfers to the registers.
|
||||
|
|
@ -80,17 +80,11 @@ bool g_led_control_registers_update_required = false;
|
|||
|
||||
void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||
{
|
||||
g_twi_transfer_buffer[0] = (addr << 1) | 0x00;
|
||||
g_twi_transfer_buffer[1] = reg;
|
||||
g_twi_transfer_buffer[2] = data;
|
||||
g_twi_transfer_buffer[0] = reg;
|
||||
g_twi_transfer_buffer[1] = data;
|
||||
|
||||
// Set the error code to have no relevant information
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
// Continuously attempt to transmit data until a successful transmission occurs
|
||||
//while ( TWIInfo.errorCode != 0xFF )
|
||||
//{
|
||||
TWITransmitData( g_twi_transfer_buffer, 3, 0 );
|
||||
//}
|
||||
//Transmit data until succesful
|
||||
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
|
||||
}
|
||||
|
||||
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||
|
|
@ -100,29 +94,21 @@ void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
|||
// transmit PWM registers in 9 transfers of 16 bytes
|
||||
// g_twi_transfer_buffer[] is 20 bytes
|
||||
|
||||
// set the I2C address
|
||||
g_twi_transfer_buffer[0] = (addr << 1) | 0x00;
|
||||
|
||||
// iterate over the pwm_buffer contents at 16 byte intervals
|
||||
for ( int i = 0; i < 144; i += 16 )
|
||||
{
|
||||
// set the first register, e.g. 0x24, 0x34, 0x44, etc.
|
||||
g_twi_transfer_buffer[1] = 0x24 + i;
|
||||
g_twi_transfer_buffer[0] = 0x24 + i;
|
||||
// copy the data from i to i+15
|
||||
// device will auto-increment register for data after the first byte
|
||||
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
|
||||
for ( int j = 0; j < 16; j++ )
|
||||
{
|
||||
g_twi_transfer_buffer[2 + j] = pwm_buffer[i + j];
|
||||
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
|
||||
}
|
||||
|
||||
// Set the error code to have no relevant information
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
// Continuously attempt to transmit data until a successful transmission occurs
|
||||
while ( TWIInfo.errorCode != 0xFF )
|
||||
{
|
||||
TWITransmitData( g_twi_transfer_buffer, 16 + 2, 0 );
|
||||
}
|
||||
//Transmit buffer until succesful
|
||||
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
|
||||
#include "rgb_matrix.h"
|
||||
#include <avr/io.h>
|
||||
#include "TWIlib.h"
|
||||
#include "i2c_master.h"
|
||||
#include <util/delay.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "progmem.h"
|
||||
|
|
@ -722,10 +722,8 @@ void rgb_matrix_indicators_user(void) {}
|
|||
// }
|
||||
|
||||
void rgb_matrix_init_drivers(void) {
|
||||
//sei();
|
||||
|
||||
// Initialize TWI
|
||||
TWIInit();
|
||||
i2c_init();
|
||||
IS31FL3731_init( DRIVER_ADDR_1 );
|
||||
IS31FL3731_init( DRIVER_ADDR_2 );
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue