1
0
Fork 0

added HHKB/README and clean some codes.

This commit is contained in:
tmk 2011-05-25 10:37:58 +09:00
parent 74f7e19863
commit af85b6bba6
23 changed files with 111 additions and 103 deletions

0
adb.c Executable file → Normal file
View file

2
adb_usb/Makefile Executable file → Normal file
View file

@ -38,7 +38,7 @@ F_CPU = 16000000
# #
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover #USB_NKRO_ENABLE = yes # USB Nkey Rollover

0
adb_usb/matrix.c Executable file → Normal file
View file

0
command.c Executable file → Normal file
View file

11
hhkb/Makefile Executable file → Normal file
View file

@ -1,5 +1,10 @@
#
# Makefile for PJRC Teensy
#
# Target file name (without extension). # Target file name (without extension).
TARGET = hhkb TARGET = hhkb_pjrc
# Directory common source filess exist # Directory common source filess exist
COMMON_DIR = .. COMMON_DIR = ..
@ -13,7 +18,7 @@ TARGET_SRC = main_pjrc.c \
matrix.c \ matrix.c \
led.c led.c
CONFIG_H = config.h CONFIG_H = config_pjrc.h
# MCU name, you MUST set this to match the board you are using # MCU name, you MUST set this to match the board you are using
@ -36,7 +41,7 @@ F_CPU = 16000000
# comment out to disable the options. # comment out to disable the options.
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
USB_NKRO_ENABLE = yes # USB Nkey Rollover USB_NKRO_ENABLE = yes # USB Nkey Rollover

View file

@ -1,3 +1,8 @@
#
# Makefile for V-USB
#
# Target file name (without extension). # Target file name (without extension).
TARGET = hhkb_vusb TARGET = hhkb_vusb
@ -23,10 +28,6 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# MCU name, you MUST set this to match the board you are using # MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt # type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
#MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
MCU = atmega168 MCU = atmega168
@ -42,7 +43,7 @@ F_CPU = 20000000
# comment out to disable the options. # comment out to disable the options.
# #
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover #USB_NKRO_ENABLE = yes # USB Nkey Rollover

80
hhkb/README Normal file
View file

@ -0,0 +1,80 @@
Alternative Controller for HHKB
===============================
Feature
-------
- Mouse Keys
- NKRO on USB
- Keymap Layers
Customize Keymap
----------------
see keymap.c.
Build for Teensy
----------------
0. Edit matrix.c.
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
1. Define macros in config_pjrc.h.(Optional)
VENDOR_ID, PRODUCT_ID and string descriptor.
IS_COMMAND
2. Edit Makefile for MCU setting and build options.
MCU, F_CPU
MOUSEKEY_ENABLE, USB_EXTRA_ENABLE, USB_NKRO_ENABLE
3. Build hex file.
$ make
4. Program MCU.
$ make program
Build for V-USB
---------------
0. Edit matrix.c and usbconfig.h.
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
define macros for V-USB in usbconfig.h.
1. Define macros in config_vusb.h.(Optional)
IS_COMMAND
2. Edit Makefile.vusb for MCU setting and build options.
MCU, F_CPU
MOUSEKEY_ENABLE, USB_EXTRA_ENABLE, USB_NKRO_ENABLE
3. Build hex file.
$ make -f Makefile.vusb
4. Program MCU.
$ make -f Makefile.vusb program
Using a bootloader to program for convenience is recommended.
Once program this V-USB bootloader at first, you can program MCU without
extra programmer. You should have reset switch to start up as bootloader
mode in this case.
USBaspLoader:
http://www.obdev.at/products/vusb/usbasploader.html
V-USB Circuit
-------------
+---+ +---------------+
USB GND | | ATmega168 |
=== C3 | |
5V <-------+--------+---|Vcc,AVCC | HHKB
R1 | | ====
D- <----+--+-----R2-----|INT1 PB0-2|------->ROW
D+ <----|---+----R3-----|INT0 PB3-5|------->COL
Z1 Z2 | PB6|------->ENABLE
GND<----+---+--+--+-----|GND PE6|------->KEY
| | | PE7|------->PREV
| C2-+--|XTAL1 | (see doc/HHKB.txt for pinouts)
| X1 | |
+--C3-+--|XTAL2 RST|---SW--+GND
+---------------+
R1: 1.5K Ohm
R2,R3: 68 Ohm
Z1,Z2: Zener 3.6V
C1,C2: 22pF
C3: 0.1uF
X1: Crystal 20MHz(16MHz/12MHz)
SW: Push Switch(Optional for bootloader)
EOF

View file

@ -29,92 +29,4 @@
#endif #endif
/* PS/2 lines */
#ifdef PS2_MOUSE_ENABLE
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 4
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
// Synchronous USART is used to receive data from keyboard.
// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
// NOTE: This is recomended strongly if you use V-USB library.
#define PS2_USE_USART
// External or Pin Change Interrupt is used to receive data from keyboard.
// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
//#define PS2_USE_INT
#ifdef PS2_USE_USART
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
// set DDR of CLOCK as input to be slave
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR0C = ((1 << UMSEL00) | \
(3 << UPM00) | \
(0 << USBS0) | \
(3 << UCSZ00) | \
(0 << UCPOL0)); \
UCSR0A = 0; \
UBRR0H = 0; \
UBRR0L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR0B = ((1 << RXCIE0) | \
(1 << RXEN0)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR0B = (1 << RXEN0); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR0C = 0; \
UCSR0B &= ~((1 << RXEN0) | \
(1 << TXEN0)); \
} while (0)
#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
#define PS2_USART_RX_DATA UDR0
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
#define PS2_USART_RX_VECT USART_RX_vect
#endif
#ifdef PS2_USE_INT
/* INT1
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
} while (0)
#define PS2_INT_ON() do { \
EIMSK |= (1<<INT1); \
} while (0)
#define PS2_INT_OFF() do { \
EIMSK &= ~(1<<INT1); \
} while (0)
#define PS2_INT_VECT INT1_vect
*/
/* PCINT20 */
#define PS2_INT_INIT() do { \
PCICR |= (1<<PCIE2); \
} while (0)
#define PS2_INT_ON() do { \
PCMSK2 |= (1<<PCINT20); \
} while (0)
#define PS2_INT_OFF() do { \
PCMSK2 &= ~(1<<PCINT20); \
PCICR &= ~(1<<PCIE2); \
} while (0)
#define PS2_INT_VECT PCINT2_vect
#endif
#endif
#endif #endif

0
hhkb/doc/HHKB_TP1684.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 146 KiB

After

Width:  |  Height:  |  Size: 146 KiB

0
hhkb/doc/HHKB_chart1.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 152 KiB

After

Width:  |  Height:  |  Size: 152 KiB

0
hhkb/doc/HHKB_chart2.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 145 KiB

After

Width:  |  Height:  |  Size: 145 KiB

0
hhkb/doc/HHKB_connector.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 189 KiB

After

Width:  |  Height:  |  Size: 189 KiB

0
hhkb/doc/HHKB_controller.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 132 KiB

After

Width:  |  Height:  |  Size: 132 KiB

0
hhkb/doc/HHKB_keyswitch.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 168 KiB

After

Width:  |  Height:  |  Size: 168 KiB

0
hhkb/doc/connector_contact.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 188 KiB

After

Width:  |  Height:  |  Size: 188 KiB

0
hhkb/doc/logic_analyzer.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 166 KiB

After

Width:  |  Height:  |  Size: 166 KiB

0
hhkb/doc/probe_contact.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 204 KiB

After

Width:  |  Height:  |  Size: 204 KiB

0
hhkb/doc/teensy_install.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 133 KiB

After

Width:  |  Height:  |  Size: 133 KiB

0
hhkb/doc/teensy_wiring.jpg Executable file → Normal file
View file

Before

Width:  |  Height:  |  Size: 151 KiB

After

Width:  |  Height:  |  Size: 151 KiB

View file

@ -37,13 +37,13 @@ F_CPU = 16000000
# #
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover #USB_NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options -------------------------- #---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex

9
ps2_usb/Makefile Executable file → Normal file
View file

@ -1,5 +1,10 @@
#
# Makefile for PJRC Teensy
#
# Target file name (without extension). # Target file name (without extension).
TARGET = ps2_usb TARGET = ps2_usb_pjrc
# Directory common source filess exist # Directory common source filess exist
COMMON_DIR = .. COMMON_DIR = ..
@ -37,7 +42,7 @@ F_CPU = 16000000
# comment out to disable the options. # comment out to disable the options.
# #
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
USB_NKRO_ENABLE = yes # USB Nkey Rollover USB_NKRO_ENABLE = yes # USB Nkey Rollover

View file

@ -1,5 +1,10 @@
#
# Makefile for V-USB
#
# Target file name (without extension). # Target file name (without extension).
TARGET = ps2_vusb TARGET = ps2_usb_vusb
# Directory common source filess exist # Directory common source filess exist
COMMON_DIR = .. COMMON_DIR = ..
@ -43,7 +48,7 @@ F_CPU = 20000000
# comment out to disable the options. # comment out to disable the options.
# #
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover #USB_NKRO_ENABLE = yes # USB Nkey Rollover