diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h
index 5bf426df7e..8a5b96ec36 100644
--- a/keyboards/hineybush/hbcp/config.h
+++ b/keyboards/hineybush/hbcp/config.h
@@ -58,26 +58,11 @@ along with this program. If not, see .
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -98,149 +83,4 @@ along with this program. If not, see .
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP H
-//#define MAGIC_KEY_HELP_ALT SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER0_ALT GRAVE
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hineybush/hbcp/hbcp.c b/keyboards/hineybush/hbcp/hbcp.c
index cd5320f6e5..e2513023e0 100644
--- a/keyboards/hineybush/hbcp/hbcp.c
+++ b/keyboards/hineybush/hbcp/hbcp.c
@@ -67,6 +67,15 @@ void led_set_kb(uint8_t usb_led) {
led_set_user(usb_led);
}
+void eeconfig_init_kb(void) { // EEPROM is getting reset!
+ rgblight_enable(); // Enable RGB by default
+ rgblight_sethsv(0, 255, 128); // Set default HSV - red hue, full saturation, medium brightness
+ rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default
+
+ eeconfig_update_kb(0);
+ eeconfig_init_user();
+}
+
#ifdef RGBLIGHT_ENABLE
__attribute__ ((weak))
diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk
index fa31c9e001..869fa029c9 100644
--- a/keyboards/hineybush/hbcp/rules.mk
+++ b/keyboards/hineybush/hbcp/rules.mk
@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug