YMD96 complete QMK port (#3105)
* readded code for YMD96 full working * added jj50 layout back
This commit is contained in:
Harshit Goel
Drashna Jaelre
parent
74d86832c3
commit
b36a1ef61b
17 changed files with 650 additions and 43 deletions
|
|
@ -17,6 +17,8 @@ Keyboard maintainer: [Andrew](https://github.com/sparkyman215)
|
|||
Hardware Supported: YMD96 with the ATmega32a chip.
|
||||
Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds.
|
||||
|
||||
A very big thanks to @krusli for making the RGB underglow, Backlight, CapsLock and NumLock LEDs working correctly.
|
||||
|
||||
## Finding your specific matrix
|
||||
|
||||
This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB), also found on this qmk repo, to work with the YMD96 keyboard. However, I only have one board to test with, which might have a different layout than yours. To get qmk working with your specific layout, you'll need to follow these steps:
|
||||
|
|
|
|||
213
keyboards/ymd96/backlight.c
Normal file
213
keyboards/ymd96/backlight.c
Normal file
|
|
@ -0,0 +1,213 @@
|
|||
/**
|
||||
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#include "backlight.h"
|
||||
#include "quantum.h"
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/interrupt.h>
|
||||
|
||||
#include "backlight_custom.h"
|
||||
#include "breathing_custom.h"
|
||||
|
||||
// DEBUG
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
|
||||
// Port D: digital pins of the AVR chipset
|
||||
#define NUMLOCK_PORT (1 << 0) // 0th pin of Port D (digital)
|
||||
#define CAPSLOCK_PORT (1 << 1) // 1st pin
|
||||
#define BACKLIGHT_PORT (1 << 4) // 4th pin
|
||||
//#define SCROLLLOCK_PORT (1 << 6) // 6th pin
|
||||
|
||||
#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
|
||||
#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
|
||||
|
||||
#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
|
||||
|
||||
#define PWM_MAX 0xFF
|
||||
#define TIMER_TOP 255 // 8 bit PWM
|
||||
|
||||
extern backlight_config_t backlight_config;
|
||||
|
||||
/**
|
||||
* References
|
||||
* Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
|
||||
* TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
|
||||
* Timers: http://www.avrbeginners.net/architecture/timers/timers.html
|
||||
* 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
|
||||
* PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
|
||||
*/
|
||||
|
||||
// @Override
|
||||
// turn LEDs on and off depending on USB caps/num/scroll lock states.
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
// turn on
|
||||
DDRD |= NUMLOCK_PORT;
|
||||
PORTD |= NUMLOCK_PORT;
|
||||
} else {
|
||||
// turn off
|
||||
DDRD &= ~NUMLOCK_PORT;
|
||||
PORTD &= ~NUMLOCK_PORT;
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRD |= CAPSLOCK_PORT;
|
||||
PORTD |= CAPSLOCK_PORT;
|
||||
} else {
|
||||
DDRD &= ~CAPSLOCK_PORT;
|
||||
PORTD &= ~CAPSLOCK_PORT;
|
||||
}
|
||||
|
||||
/* YMD96 does not have scroll lock led
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
DDRD |= SCROLLLOCK_PORT;
|
||||
PORTD |= SCROLLLOCK_PORT;
|
||||
} else {
|
||||
DDRD &= ~SCROLLLOCK_PORT;
|
||||
PORTD &= ~SCROLLLOCK_PORT;
|
||||
}*/
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
|
||||
// sets up Timer 1 for 8-bit PWM
|
||||
void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
|
||||
// default 8 bit mode
|
||||
TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
|
||||
TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
|
||||
|
||||
// clear output compare value A
|
||||
// outb(OCR1AH, 0);
|
||||
// outb(OCR1AL, 0);
|
||||
|
||||
// clear output comparator registers for B
|
||||
OCR1BH = 0; // outb(OCR1BH, 0);
|
||||
OCR1BL = 0; // outb(OCR1BL, 0);
|
||||
}
|
||||
|
||||
bool is_init = false;
|
||||
void timer1Init(void) {
|
||||
// timer1SetPrescaler(TIMER1PRESCALE)
|
||||
// set to DIV/64
|
||||
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
|
||||
|
||||
// reset TCNT1
|
||||
TCNT1H = 0; // outb(TCNT1H, 0);
|
||||
TCNT1L = 0; // outb(TCNT1L, 0);
|
||||
|
||||
// TOIE1: Timer Overflow Interrupt Enable (Timer 1);
|
||||
TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
|
||||
|
||||
is_init = true;
|
||||
}
|
||||
|
||||
void timer1UnInit(void) {
|
||||
// set prescaler back to NONE
|
||||
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
|
||||
|
||||
// disable timer overflow interrupt
|
||||
TIMSK &= ~_BV(TOIE1); // overflow bit?
|
||||
|
||||
setPWM(0);
|
||||
|
||||
is_init = false;
|
||||
}
|
||||
|
||||
|
||||
// handle TCNT1 overflow
|
||||
//! Interrupt handler for tcnt1 overflow interrupt
|
||||
ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
|
||||
{
|
||||
// sei();
|
||||
// handle breathing here
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
if (is_breathing()) {
|
||||
custom_breathing_handler();
|
||||
}
|
||||
#endif
|
||||
|
||||
// TODO call user defined function
|
||||
}
|
||||
|
||||
// enable timer 1 PWM
|
||||
// timer1PWMBOn()
|
||||
void timer1PWMBEnable(void) {
|
||||
// turn on channel B (OC1B) PWM output
|
||||
// set OC1B as non-inverted PWM
|
||||
TCCR1A |= _BV(COM1B1);
|
||||
TCCR1A &= ~_BV(COM1B0);
|
||||
}
|
||||
|
||||
// disable timer 1 PWM
|
||||
// timer1PWMBOff()
|
||||
void timer1PWMBDisable(void) {
|
||||
TCCR1A &= ~_BV(COM1B1);
|
||||
TCCR1A &= ~_BV(COM1B0);
|
||||
}
|
||||
|
||||
void enableBacklight(void) {
|
||||
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||
}
|
||||
|
||||
void disableBacklight(void) {
|
||||
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||
}
|
||||
|
||||
void startPWM(void) {
|
||||
timer1Init();
|
||||
timer1PWMBEnable();
|
||||
enableBacklight();
|
||||
}
|
||||
|
||||
void stopPWM(void) {
|
||||
timer1UnInit();
|
||||
disableBacklight();
|
||||
timer1PWMBDisable();
|
||||
}
|
||||
|
||||
void b_led_init_ports(void) {
|
||||
/* turn backlight on/off depending on user preference */
|
||||
#if BACKLIGHT_ON_STATE == 0
|
||||
// DDRx register: sets the direction of Port D
|
||||
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||
#else
|
||||
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||
#endif
|
||||
|
||||
timer1PWMSetup();
|
||||
startPWM();
|
||||
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
breathing_enable();
|
||||
#endif
|
||||
}
|
||||
|
||||
void b_led_set(uint8_t level) {
|
||||
if (level > BACKLIGHT_LEVELS) {
|
||||
level = BACKLIGHT_LEVELS;
|
||||
}
|
||||
|
||||
setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
|
||||
}
|
||||
|
||||
// called every matrix scan
|
||||
void b_led_task(void) {
|
||||
// do nothing for now
|
||||
}
|
||||
|
||||
void setPWM(uint16_t xValue) {
|
||||
if (xValue > TIMER_TOP) {
|
||||
xValue = TIMER_TOP;
|
||||
}
|
||||
OCR1B = xValue; // timer1PWMBSet(xValue);
|
||||
}
|
||||
|
||||
#endif // BACKLIGHT_ENABLE
|
||||
15
keyboards/ymd96/backlight_custom.h
Normal file
15
keyboards/ymd96/backlight_custom.h
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
/**
|
||||
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#ifndef BACKLIGHT_CUSTOM_H
|
||||
#define BACKLIGHT_CUSTOM_H
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
void b_led_init_ports(void);
|
||||
void b_led_set(uint8_t level);
|
||||
void b_led_task(void);
|
||||
void setPWM(uint16_t xValue);
|
||||
|
||||
#endif // BACKLIGHT_CUSTOM_H
|
||||
140
keyboards/ymd96/breathing_custom.h
Normal file
140
keyboards/ymd96/breathing_custom.h
Normal file
|
|
@ -0,0 +1,140 @@
|
|||
/**
|
||||
* Breathing effect code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Works in conjunction with `backlight.c`.
|
||||
*
|
||||
* Code adapted from `quantum.c` to register with the existing TIMER1 overflow
|
||||
* handler in `backlight.c` instead of setting up its own timer.
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
|
||||
#include "backlight_custom.h"
|
||||
|
||||
#ifndef BREATHING_PERIOD
|
||||
#define BREATHING_PERIOD 6
|
||||
#endif
|
||||
|
||||
#define breathing_min() do {breathing_counter = 0;} while (0)
|
||||
#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
|
||||
|
||||
// TODO make this share code with quantum.c
|
||||
|
||||
#define BREATHING_NO_HALT 0
|
||||
#define BREATHING_HALT_OFF 1
|
||||
#define BREATHING_HALT_ON 2
|
||||
#define BREATHING_STEPS 128
|
||||
|
||||
static uint8_t breathing_period = BREATHING_PERIOD;
|
||||
static uint8_t breathing_halt = BREATHING_NO_HALT;
|
||||
static uint16_t breathing_counter = 0;
|
||||
|
||||
static bool breathing = false;
|
||||
|
||||
bool is_breathing(void) {
|
||||
return breathing;
|
||||
}
|
||||
|
||||
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
||||
static uint16_t cie_lightness(uint16_t v) {
|
||||
if (v <= 5243) // if below 8% of max
|
||||
return v / 9; // same as dividing by 900%
|
||||
else {
|
||||
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
|
||||
// to get a useful result with integer division, we shift left in the expression above
|
||||
// and revert what we've done again after squaring.
|
||||
y = y * y * y >> 8;
|
||||
if (y > 0xFFFFUL) // prevent overflow
|
||||
return 0xFFFFU;
|
||||
else
|
||||
return (uint16_t) y;
|
||||
}
|
||||
}
|
||||
|
||||
void breathing_enable(void) {
|
||||
breathing = true;
|
||||
breathing_counter = 0;
|
||||
breathing_halt = BREATHING_NO_HALT;
|
||||
// interrupt already registered
|
||||
}
|
||||
|
||||
void breathing_pulse(void) {
|
||||
if (get_backlight_level() == 0)
|
||||
breathing_min();
|
||||
else
|
||||
breathing_max();
|
||||
breathing_halt = BREATHING_HALT_ON;
|
||||
// breathing_interrupt_enable();
|
||||
breathing = true;
|
||||
}
|
||||
|
||||
void breathing_disable(void) {
|
||||
breathing = false;
|
||||
// backlight_set(get_backlight_level());
|
||||
b_led_set(get_backlight_level()); // custom implementation of backlight_set()
|
||||
}
|
||||
|
||||
void breathing_self_disable(void)
|
||||
{
|
||||
if (get_backlight_level() == 0)
|
||||
breathing_halt = BREATHING_HALT_OFF;
|
||||
else
|
||||
breathing_halt = BREATHING_HALT_ON;
|
||||
}
|
||||
|
||||
void breathing_toggle(void) {
|
||||
if (is_breathing())
|
||||
breathing_disable();
|
||||
else
|
||||
breathing_enable();
|
||||
}
|
||||
|
||||
void breathing_period_set(uint8_t value)
|
||||
{
|
||||
if (!value)
|
||||
value = 1;
|
||||
breathing_period = value;
|
||||
}
|
||||
|
||||
void breathing_period_default(void) {
|
||||
breathing_period_set(BREATHING_PERIOD);
|
||||
}
|
||||
|
||||
void breathing_period_inc(void)
|
||||
{
|
||||
breathing_period_set(breathing_period+1);
|
||||
}
|
||||
|
||||
void breathing_period_dec(void)
|
||||
{
|
||||
breathing_period_set(breathing_period-1);
|
||||
}
|
||||
|
||||
/* To generate breathing curve in python:
|
||||
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
|
||||
*/
|
||||
static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||
|
||||
// Use this before the cie_lightness function.
|
||||
static inline uint16_t scale_backlight(uint16_t v) {
|
||||
return v / BACKLIGHT_LEVELS * get_backlight_level();
|
||||
}
|
||||
|
||||
void custom_breathing_handler(void) {
|
||||
uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
|
||||
// resetting after one period to prevent ugly reset at overflow.
|
||||
breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
|
||||
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
|
||||
|
||||
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
|
||||
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
|
||||
{
|
||||
// breathing_interrupt_disable();
|
||||
}
|
||||
|
||||
setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
|
||||
}
|
||||
|
||||
#endif // BACKLIGHT_BREATHING
|
||||
#endif // BACKLIGHT_ENABLE
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
|
||||
|
||||
Modified 2018 Harshit Goel <Harshitgoel96@yahoo.com>
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
|
|
@ -16,6 +16,8 @@ You should have received a copy of the GNU General Public License
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
|
|
@ -29,15 +31,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* matrix size */
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 15
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
//#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
#define RGB_DI_PIN C4
|
||||
#define RGBLED_NUM 18
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_VAL_STEP 20
|
||||
//#define RGB_DI_PIN C4
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_LEVELS 12
|
||||
// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work
|
||||
|
||||
#define TAPPING_TOGGLE 3
|
||||
|
||||
#define NO_UART 1
|
||||
#define BOOTLOADHID_BOOTLOADER 1
|
||||
|
||||
/* RGB underglow */
|
||||
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
|
||||
// The same pin is used on the JJ40, at least.
|
||||
#define RGBLED_NUM 18
|
||||
#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
/*#define RGBLIGHT_VAL_STEP 20
|
||||
|
||||
#define NO_UART 1
|
||||
#define BOOTLOADHID_BOOTLOADER 1*/
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||
|
|
|
|||
|
|
@ -24,6 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define _DEFLT 0
|
||||
#define _RAISE 1
|
||||
|
||||
#define KEYMAP KEYMAP_DEFAULT
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Layer 0, default layer
|
||||
|
|
|
|||
9
keyboards/ymd96/keymaps/hgoel89/config.h
Normal file
9
keyboards/ymd96/keymaps/hgoel89/config.h
Normal file
|
|
@ -0,0 +1,9 @@
|
|||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
#define TAPPING_TERM 300
|
||||
|
||||
#endif
|
||||
67
keyboards/ymd96/keymaps/hgoel89/keymap.c
Normal file
67
keyboards/ymd96/keymaps/hgoel89/keymap.c
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
#include "ymd96.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
/*
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2*/
|
||||
/*
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
};*/
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
// runs at every matrix scan.
|
||||
}
|
||||
|
||||
enum {
|
||||
TD_H_E = 0
|
||||
};
|
||||
|
||||
qk_tap_dance_action_t tap_dance_actions[] = {
|
||||
[TD_H_E] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END)
|
||||
};
|
||||
#define ______ KC_TRNS
|
||||
#define _DEFLT 0
|
||||
#define _RAISE 1
|
||||
|
||||
#define KEYMAP KEYMAP_CUSTOM
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Layer 0, default layer
|
||||
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |Print | Home | End |Insert|Delete| PgUp | 19 keys
|
||||
* | ~` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BkSpc |NumLck| / | * | PgDn | 18 keys
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | { | } | \ | 7 | 8 | 9 | - | 18 keys
|
||||
* | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Return | 4 | 5 | 6 | + | 17 keys
|
||||
* | LShft | Z | X | C | V | B | N | M | , | . | / | RShft | 1 | 2 | 3 | En | 16 keys
|
||||
* | Ctrl | Win | Alt | Space | Fn | Win | Left | Down | Up | Right| 0 | . | | 12 keys
|
||||
*/
|
||||
|
||||
[_DEFLT] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_INSERT, KC_DELETE, KC_PGUP, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_PMNS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_NO, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, KC_PENT, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RGUI , KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, MO(_RAISE), KC_P0, KC_PDOT \
|
||||
),
|
||||
/* Layer 1, raise layer
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* | | |rgb_up|rgb_dn|rgb_mo| | | | | | F22 | F23 | F24 | | | | | |
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* | | | | | | | | | VolDn| VolUp| Mute | Play/Pause | | | | |
|
||||
* | | | | | | |MPrev | | | MNext| | | |
|
||||
*/
|
||||
[_RAISE] = KEYMAP(
|
||||
RESET,RGB_TOG, BL_TOGG, BL_STEP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
|
||||
______, BL_INC, BL_DEC, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
|
||||
______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_F22, KC_F23, KC_F24, ______, ______, ______, ______, ______, \
|
||||
______, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MODE_FORWARD , ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
|
||||
______, RGB_HUD, RGB_SAD, RGB_VAD, ______, ______, ______, ______, KC_VOLD,KC_VOLU, KC_MUTE, KC_MPLY, ______, ______, ______, ______, \
|
||||
______, ______, BL_OFF, BL_ON, ______, ______, ______, ______, ______, ______, ______, ______ \
|
||||
)
|
||||
};
|
||||
2
keyboards/ymd96/keymaps/hgoel89/readme.md
Normal file
2
keyboards/ymd96/keymaps/hgoel89/readme.md
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# Harshit
|
||||
Modified the layout according to me. Full 2u NumPad 0, 5 * 1u modifiers on right of space. Split right shift.
|
||||
1
keyboards/ymd96/keymaps/hgoel89/rules.mk
Normal file
1
keyboards/ymd96/keymaps/hgoel89/rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
TAP_DANCE_ENABLE = yes
|
||||
|
|
@ -29,6 +29,9 @@ static uint8_t debouncing = DEBOUNCE;
|
|||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
void matrix_set_row_status(uint8_t row);
|
||||
uint8_t bit_reverse(uint8_t x);
|
||||
|
||||
void matrix_init(void) {
|
||||
// all outputs for rows high
|
||||
DDRB = 0xFF;
|
||||
|
|
@ -47,18 +50,20 @@ void matrix_init(void) {
|
|||
matrix[row] = 0x00;
|
||||
matrix_debouncing[row] = 0x00;
|
||||
}
|
||||
}
|
||||
/*}
|
||||
|
||||
matrix_init_quantum(); // missing from original port by Luiz
|
||||
void matrix_set_row_status(uint8_t row) {
|
||||
DDRB = (1 << row);
|
||||
PORTB = ~(1 << row);
|
||||
}
|
||||
}*/
|
||||
|
||||
uint8_t bit_reverse(uint8_t x) {
|
||||
|
||||
/*uint8_t bit_reverse(uint8_t x) {
|
||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
|
||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
|
||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
|
||||
return x;
|
||||
return x;*/
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void) {
|
||||
|
|
@ -93,11 +98,24 @@ uint8_t matrix_scan(void) {
|
|||
}
|
||||
}
|
||||
|
||||
matrix_scan_user();
|
||||
matrix_scan_quantum(); // also missing in original PS2AVRGB implementation
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
// declarations
|
||||
void matrix_set_row_status(uint8_t row) {
|
||||
DDRB = (1 << row);
|
||||
PORTB = ~(1 << row);
|
||||
}
|
||||
|
||||
uint8_t bit_reverse(uint8_t x) {
|
||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
|
||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
|
||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
|
||||
return x;
|
||||
}
|
||||
|
||||
inline matrix_row_t matrix_get_row(uint8_t row) {
|
||||
return matrix[row];
|
||||
}
|
||||
|
|
|
|||
|
|
@ -28,23 +28,31 @@ F_CPU = 12000000
|
|||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = atmel-dfu
|
||||
BOOTLOADER = bootloadHID
|
||||
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = yes
|
||||
BOOTMAGIC_ENABLE = no
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = yes
|
||||
CONSOLE_ENABLE = no
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
BACKLIGHT_ENABLE = yes
|
||||
BACKLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
KEY_LOCK_ENABLE = yes
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
# custom matrix setup
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC = matrix.c i2c.c
|
||||
SRC = matrix.c i2c.c backlight.c
|
||||
|
||||
# programming options
|
||||
PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
|
||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||
|
|
|
|||
16
keyboards/ymd96/tools/README.md
Normal file
16
keyboards/ymd96/tools/README.md
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
# JJ40 Tools
|
||||
|
||||
## usb_detach.c
|
||||
|
||||
When trying to flash on Linux, you may encounter a "Resource Unavailable" error. This means that Linux's HID driver has taken exclusive control of the keyboard, and the program script can't flash it.
|
||||
This program can force Linux to give up a device, so that the programming script can reset it.
|
||||
|
||||
### To compile:
|
||||
```
|
||||
gcc usb_detach.c -o usb_detach
|
||||
```
|
||||
|
||||
### To run:
|
||||
1. Use `lsusb` to discover the Bus and Device numbers for your keyboard.
|
||||
2. Run the program: `sudo ./usb_detach /dev/bus/usb/<BUS>/<DEVICE>`.
|
||||
3. Build and program the firmware as normal.
|
||||
33
keyboards/ymd96/tools/usb_detach.c
Normal file
33
keyboards/ymd96/tools/usb_detach.c
Normal file
|
|
@ -0,0 +1,33 @@
|
|||
/* Found at https://www.linuxquestions.org/questions/linux-hardware-18/how-to-unclaim-usb-device-558138/#post3406986 */
|
||||
#include <stdio.h>
|
||||
#include <sys/types.h>
|
||||
#include <sys/stat.h>
|
||||
#include <fcntl.h>
|
||||
#include <linux/ioctl.h>
|
||||
#include <linux/usbdevice_fs.h>
|
||||
|
||||
int main(int argc, char**argv)
|
||||
{
|
||||
struct usbdevfs_ioctl command;
|
||||
int ret;
|
||||
int fd;
|
||||
int i;
|
||||
if (argc>1) {
|
||||
fd = open(argv[1],O_RDWR);
|
||||
if (fd<1){
|
||||
perror("unable to open file");
|
||||
return 1;
|
||||
}
|
||||
for (i=0;i<255;i++){ // hack: should fetch how many interface there is.
|
||||
command.ifno = i;
|
||||
command.ioctl_code = USBDEVFS_DISCONNECT;
|
||||
command.data = NULL;
|
||||
ret = ioctl(fd, USBDEVFS_IOCTL, &command);
|
||||
if(ret!=-1)
|
||||
printf("un claimed interface %d %d\n",i,ret);
|
||||
}
|
||||
} else {
|
||||
printf ("usage: %s /dev/bus/usb/BUS/DEVICE\n",argv[0]);
|
||||
printf("Release all interfaces of this usb device for usage in virtualisation\n");
|
||||
}
|
||||
}
|
||||
|
|
@ -118,7 +118,8 @@ section at the end of this file).
|
|||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||
* device is powered from the USB bus.
|
||||
*/
|
||||
#define USB_CFG_MAX_BUS_POWER 500
|
||||
// max power draw with maxed white underglow measured at 120 mA (peaks)
|
||||
#define USB_CFG_MAX_BUS_POWER 100
|
||||
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||
* The value is in milliamperes. [It will be divided by two since USB
|
||||
* communicates power requirements in units of 2 mA.]
|
||||
|
|
|
|||
|
|
@ -1,5 +1,6 @@
|
|||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2018 Kenneth A. <github.com/krusli>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -16,30 +17,81 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
*/
|
||||
|
||||
#include "ymd96.h"
|
||||
#include "rgblight.h"
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#include "action_layer.h"
|
||||
#include "i2c.h"
|
||||
#include "quantum.h"
|
||||
|
||||
#include "i2c.h"
|
||||
|
||||
#include "backlight.h"
|
||||
#include "backlight_custom.h"
|
||||
|
||||
// for keyboard subdirectory level init functions
|
||||
// @Override
|
||||
void matrix_init_kb(void) {
|
||||
// call user level keymaps, if any
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
/// Overrides functions in `quantum.c`
|
||||
void backlight_init_ports(void) {
|
||||
b_led_init_ports();
|
||||
}
|
||||
|
||||
void backlight_task(void) {
|
||||
b_led_task();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level) {
|
||||
b_led_set(level);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
||||
// custom RGB driver
|
||||
void rgblight_set(void) {
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i=0; i<RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_init();
|
||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
||||
}
|
||||
|
||||
bool rgb_init = false;
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// if LEDs were previously on before poweroff, turn them back on
|
||||
if (rgb_init == false && rgblight_config.enable) {
|
||||
i2c_init();
|
||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
||||
rgb_init = true;
|
||||
}
|
||||
|
||||
rgblight_task();
|
||||
#else
|
||||
void matrix_scan_kb(void) {
|
||||
#endif
|
||||
matrix_scan_user();
|
||||
/* Nothing else for now. */
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
rgblight_task();
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
|
||||
|
||||
Modified 2018 harshit goel
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
|
|
@ -19,11 +19,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "quantum_keycodes.h"
|
||||
#include "keycode.h"
|
||||
#include "action.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
void matrix_init_user(void); // TODO port this to other PS2AVRGB boards
|
||||
|
||||
#define KEYMAP_DEFAULT( \
|
||||
K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
|
||||
K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
|
||||
K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
|
||||
|
|
@ -41,6 +44,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
{ K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_CUSTOM( \
|
||||
K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
|
||||
K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
|
||||
K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
|
||||
K200, K201, K202, K203, K204, K205, K603, K613, K713, K703, K210, K211, K213, K206, K207, K208, K209, \
|
||||
K100, K101, K102, K103, K104, K105, K604, K614, K714, K704, K110, K111, K106, K107, K108, K009, \
|
||||
K000, K001, K002, K605, K705, K010, K011, K606, K607, KC_NO, K006, K008 \
|
||||
) { \
|
||||
{ K000, K001, K002, KC_NO, KC_NO, KC_NO, K006, KC_NO, K008, K009, K010, K011, KC_NO, K013, KC_NO, }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, KC_NO, K110, K111, KC_NO, K113, KC_NO, }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214, }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, }, \
|
||||
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, }, \
|
||||
{ K500, KC_NO, K502, K503, K504, K505, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, }, \
|
||||
{ K600, K601, K602, K603, K604, K605, K606, K607, KC_NO, KC_NO, K610, K611, K612, K613, K614, }, \
|
||||
{ K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_jj50( \
|
||||
K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \
|
||||
K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \
|
||||
|
|
@ -57,12 +78,3 @@ K411, K410, K409, K408, K404, K405, K406, K407, K403, K402, K401, K400 \
|
|||
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue