[Keyboard] Simplify handedness for cradio (#16147)
This commit is contained in:
parent
a2ef11bb00
commit
b56707a517
2 changed files with 2 additions and 34 deletions
|
@ -67,9 +67,6 @@
|
|||
/* serial.c configuration for split keyboard */
|
||||
#define SOFT_SERIAL_PIN D2
|
||||
|
||||
/* Split handedness */
|
||||
#define EE_HANDS
|
||||
|
||||
/* Top left key on left half */
|
||||
#define BOOTMAGIC_LITE_ROW 0
|
||||
#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
|
|
@ -20,40 +20,11 @@ Make example for this keyboard (after setting up your build environment):
|
|||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Setting Handedness
|
||||
|
||||
Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
|
||||
|
||||
make cradio:default:dfu-split-left
|
||||
make cradio:default:dfu-split-right
|
||||
|
||||
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
|
||||
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
|
||||
|
||||
## Swapped Pins
|
||||
|
||||
If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
|
||||
```c
|
||||
#undef DIRECT_PINS
|
||||
#define DIRECT_PINS { \
|
||||
{ D7, F7, F6, F5, F4 }, \
|
||||
{ B1, B3, B2, B6, D3 }, \
|
||||
{ D1, D0, D4, C6, E6 }, \
|
||||
{ B4, B5, NO_PIN, NO_PIN, NO_PIN } \
|
||||
}
|
||||
#undef DIRECT_PINS_RIGHT
|
||||
#define DIRECT_PINS_RIGHT { \
|
||||
{ F4, F5, F6, F7, D7 }, \
|
||||
{ D3, B6, B2, B3, B1 }, \
|
||||
{ E6, C6, D4, D0, D1 }, \
|
||||
{ B5, B4, NO_PIN, NO_PIN, NO_PIN } \
|
||||
}
|
||||
```
|
||||
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
|
||||
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
|
||||
|
||||
|
|
Loading…
Reference in a new issue