Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

[Keyboard] Simplify handedness for cradio (#16147)

Browse source
This commit is contained in:
Albert Y 2022-02-01 10:07:33 +08:00 committed by GitHub
parent a2ef11bb00
commit b56707a517
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 2 additions and 34 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
keyboards/cradio/config.h
View file

@ -67,9 +67,6 @@
/* serial.c configuration for split keyboard */ /* serial.c configuration for split keyboard */
#define SOFT_SERIAL_PIN D2 #define SOFT_SERIAL_PIN D2
/* Split handedness */
#define EE_HANDS
/* Top left key on left half */ /* Top left key on left half */
#define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0 #define BOOTMAGIC_LITE_COLUMN 0

33
keyboards/cradio/readme.md
View file

@ -20,40 +20,11 @@ Make example for this keyboard (after setting up your build environment):
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Setting Handedness
Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
make cradio:default:dfu-split-left
make cradio:default:dfu-split-right
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
## Bootloader ## Bootloader
Enter the bootloader in 3 ways: Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. * **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
## Swapped Pins * **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
```c
#undef DIRECT_PINS
#define DIRECT_PINS { \
{ D7, F7, F6, F5, F4 }, \
{ B1, B3, B2, B6, D3 }, \
{ D1, D0, D4, C6, E6 }, \
{ B4, B5, NO_PIN, NO_PIN, NO_PIN } \
}
#undef DIRECT_PINS_RIGHT
#define DIRECT_PINS_RIGHT { \
{ F4, F5, F6, F7, D7 }, \
{ D3, B6, B2, B3, B1 }, \
{ E6, C6, D4, D0, D1 }, \
{ B5, B4, NO_PIN, NO_PIN, NO_PIN } \
}
```