From 04c950157407c32ef04a68a1b8180630cfb9d84c Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 25 Nov 2013 11:25:44 +0900 Subject: [PATCH 01/10] Fix Makfile and config.h for LUFA in ps2_usb --- converter/ps2_usb/Makefile | 127 ++++++++++++++++++++++--------------- converter/ps2_usb/config.h | 23 +++---- 2 files changed, 87 insertions(+), 63 deletions(-) diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile index 0c6442374c..04bf28a00c 100644 --- a/converter/ps2_usb/Makefile +++ b/converter/ps2_usb/Makefile @@ -1,5 +1,5 @@ # Target file name (without extension). -TARGET = ps2_usb +TARGET = ps2_usb_lufa # Directory common source filess exist TOP_DIR = ../.. @@ -7,69 +7,96 @@ TOP_DIR = ../.. # Directory keyboard dependent files exist TARGET_DIR = . - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Build Options -# *Comment out* to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -NKRO_ENABLE = yes # USB Nkey Rollover - -PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) -#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin -#PS2_USE_BUSYWAIT = yes # uses primitive reference code - - -# keyboard dependent files -SRC = keymap.c \ +# project specific files +SRC = keymap_common.c \ matrix.c \ led.c - -ifdef PS2_USE_USART - SRC += protocol/ps2_usart.c - OPT_DEFS += -DPS2_USE_USART -endif -ifdef PS2_USE_INT - SRC += protocol/ps2.c - OPT_DEFS += -DPS2_USE_INT -endif -ifdef PS2_USE_BUSYWAIT - SRC += protocol/ps2.c - OPT_DEFS += -DPS2_USE_BUSYWAIT +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) endif - -#CONFIG_H = config_pjrc_usart.h CONFIG_H = config.h -#---------------- Programming Options -------------------------- -PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# PS/2 Options +# +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +PS2_USE_BUSYWAIT = yes # uses primitive reference code + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax # Search Path VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol/pjrc.mk include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/common.mk include $(TOP_DIR)/rules.mk diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h index 51cd271d78..1ad2bd1b49 100644 --- a/converter/ps2_usb/config.h +++ b/converter/ps2_usb/config.h @@ -22,6 +22,7 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6512 +#define DEVICE_VER 0x0001 #define MANUFACTURER t.m.k. #define PRODUCT PS/2 keyboard converter #define DESCRIPTION convert PS/2 keyboard to USB @@ -39,10 +40,6 @@ along with this program. If not, see . ) -/* legacy keymap support */ -#define USE_LEGACY_KEYMAP - - #ifdef PS2_USE_USART #if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) /* XCK for clock line and RXD for data line */ @@ -136,7 +133,7 @@ along with this program. If not, see . #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND #define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 +#define PS2_CLOCK_BIT 5 #define PS2_DATA_PORT PORTD #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD @@ -157,14 +154,14 @@ along with this program. If not, see . #ifdef PS2_USE_BUSYWAIT -#define PS2_CLOCK_PORT PORTF -#define PS2_CLOCK_PIN PINF -#define PS2_CLOCK_DDR DDRF -#define PS2_CLOCK_BIT 0 -#define PS2_DATA_PORT PORTF -#define PS2_DATA_PIN PINF -#define PS2_DATA_DDR DDRF -#define PS2_DATA_BIT 1 +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 #endif #endif From d5ecbb83daa13b806ee4879692aaf807b6b1b69f Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 25 Nov 2013 17:39:45 +0900 Subject: [PATCH 02/10] Add printf macro as alias of xprintf --- common/print.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/common/print.h b/common/print.h index 930e84be99..a828328b6e 100644 --- a/common/print.h +++ b/common/print.h @@ -40,6 +40,10 @@ #endif #define println(s) print_P(PSTR(s "\n")) +#ifndef AVR_LIBC_PRINTF +#define printf(f, ...) xprintf(f, ##__VA_ARGS__) +#endif + /* for old name */ #define pdec(data) print_dec(data) #define pdec16(data) print_dec(data) From 9ae9742ac59b18cf989370f53d669daeb75bd7a3 Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 25 Nov 2013 17:43:26 +0900 Subject: [PATCH 03/10] Add ps2_busywait.c and recfactor PS/2 protocol --- converter/ps2_usb/matrix.c | 28 ++++-- protocol.mk | 2 +- protocol/ps2.c | 65 +++++++++----- protocol/ps2.h | 142 ++++++++++++++++++++++++----- protocol/ps2_busywait.c | 179 +++++++++++++++++++++++++++++++++++++ 5 files changed, 363 insertions(+), 53 deletions(-) create mode 100644 protocol/ps2_busywait.c diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c index 4187ea0601..a4c27f5d5b 100644 --- a/converter/ps2_usb/matrix.c +++ b/converter/ps2_usb/matrix.c @@ -19,6 +19,7 @@ along with this program. If not, see . #include #include #include +#include "action.h" #include "print.h" #include "util.h" #include "debug.h" @@ -185,8 +186,8 @@ uint8_t matrix_scan(void) matrix_break(PAUSE); } - uint8_t code; - while ((code = ps2_host_recv())) { + uint8_t code = ps2_host_recv(); + if (!ps2_error) { switch (state) { case INIT: switch (code) { @@ -207,11 +208,17 @@ uint8_t matrix_scan(void) matrix_make(PRINT_SCREEN); state = INIT; break; + case 0x00: // Overrun [3]p.25 + print("Overrun\n"); + clear_keyboard(); + state = INIT; + break; default: // normal key make if (code < 0x80) { matrix_make(code); } else { - debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); + printf("unexpected scan code at INIT: %02X\n", code); + clear_keyboard(); } state = INIT; } @@ -232,7 +239,8 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_make(code|0x80); } else { - debug("unexpected scan code at E0: "); debug_hex(code); debug("\n"); + printf("unexpected scan code at E0: %02X\n", code); + clear_keyboard(); } state = INIT; } @@ -251,7 +259,8 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_break(code); } else { - debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); + printf("unexpected scan code at F0: %02X\n", code); + clear_keyboard(); } state = INIT; } @@ -266,7 +275,8 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_break(code|0x80); } else { - debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n"); + printf("unexpected scan code at E0_F0: %02X\n", code); + clear_keyboard(); } state = INIT; } @@ -357,7 +367,11 @@ uint8_t matrix_scan(void) default: state = INIT; } - phex(code); + } + + if (ps2_error > PS2_ERR_STARTBIT3) { + uint8_t ret = ps2_host_send(PS2_RESEND); + printf("Resend: %02X\n", ret); } return 1; } diff --git a/protocol.mk b/protocol.mk index 0d5f06c7ec..e332008731 100644 --- a/protocol.mk +++ b/protocol.mk @@ -8,7 +8,7 @@ ifdef PS2_MOUSE_ENABLE endif ifdef PS2_USE_BUSYWAIT - SRC += protocol/ps2.c + SRC += protocol/ps2_busywait.c OPT_DEFS += -DPS2_USE_BUSYWAIT endif diff --git a/protocol/ps2.c b/protocol/ps2.c index e5873a9bfa..4886b16d03 100644 --- a/protocol/ps2.c +++ b/protocol/ps2.c @@ -91,6 +91,9 @@ uint8_t ps2_error = PS2_ERR_NONE; void ps2_host_init(void) { + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + _delay_ms(2500); + #ifdef PS2_USE_INT PS2_INT_INIT(); PS2_INT_ON(); @@ -163,23 +166,11 @@ ERROR: /* receive data when host want else inhibit communication */ uint8_t ps2_host_recv_response(void) { + // Command might take 20ms to response([3]p.21) + // TrackPoint might take 25ms ([5]2.7) uint8_t data = 0; - -#ifdef PS2_USE_INT - PS2_INT_OFF(); -#endif - /* terminate a transmission if we have */ - inhibit(); - _delay_us(100); - - /* release lines(idle state) */ - idle(); - - /* wait start bit */ - wait_clock_lo(25000); // command response may take 20 ms at most - data = recv_data(); - - inhibit(); + uint8_t try = 200; + while (try-- && (data = ps2_host_recv())) ; return data; } #endif @@ -187,7 +178,17 @@ uint8_t ps2_host_recv_response(void) #ifndef PS2_USE_INT uint8_t ps2_host_recv(void) { - return ps2_host_recv_response(); + uint8_t data = 0; + + /* release lines(idle state) */ + idle(); + + /* wait start bit */ + wait_clock_lo(100); // TODO: this is enough? + data = recv_data(); + + inhibit(); + return data; } #else /* ring buffer to store ps/2 key data */ @@ -241,13 +242,6 @@ static inline void pbuf_clear(void) /* get data received by interrupt */ uint8_t ps2_host_recv(void) { - if (ps2_error) { - print("x"); - phex(ps2_error); - ps2_host_send(0xFE); // request to resend - ps2_error = PS2_ERR_NONE; - } - idle(); return pbuf_dequeue(); } @@ -450,3 +444,26 @@ static inline void inhibit(void) clock_lo(); data_hi(); } + + +/* PS/2 Resources + * + * [1] The PS/2 Mouse/Keyboard Protocol + * http://www.computer-engineering.org/ps2protocol/ + * Concise and thorough primer of PS/2 protocol. + * + * [2] Keyboard and Auxiliary Device Controller + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Signal Timing and Format + * + * [3] Keyboards(101- and 102-key) + * http://www.mcamafia.de/pdf/ibm_hitrc11.pdf + * Keyboard Layout, Scan Code Set, POR, and Commands. + * + * [4] PS/2 Reference Manuals + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Collection of IBM Personal System/2 documents. + * + * [5] TrackPoint Engineering Specifications for version 3E + * https://web.archive.org/web/20100526161812/http://wwwcssrv.almaden.ibm.com/trackpoint/download.html + */ diff --git a/protocol/ps2.h b/protocol/ps2.h index 834165356c..b780d01a29 100644 --- a/protocol/ps2.h +++ b/protocol/ps2.h @@ -1,5 +1,5 @@ /* -Copyright 2010,2011 Jun WAKO +Copyright 2010,2011,2012,2013 Jun WAKO This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, @@ -37,12 +37,60 @@ POSSIBILITY OF SUCH DAMAGE. #ifndef PS2_H #define PS2_H + +#include +#include +#include + /* * Primitive PS/2 Library for AVR + * + * PS/2 Resources + * -------------- + * [1] The PS/2 Mouse/Keyboard Protocol + * http://www.computer-engineering.org/ps2protocol/ + * Concise and thorough primer of PS/2 protocol. + * + * [2] Keyboard and Auxiliary Device Controller + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Signal Timing and Format + * + * [3] Keyboards(101- and 102-key) + * http://www.mcamafia.de/pdf/ibm_hitrc11.pdf + * Keyboard Layout, Scan Code Set, POR, and Commands. + * + * [4] PS/2 Reference Manuals + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Collection of IBM Personal System/2 documents. + * + * [5] TrackPoint Engineering Specifications for version 3E + * https://web.archive.org/web/20100526161812/http://wwwcssrv.almaden.ibm.com/trackpoint/download.html */ +#define PS2_ACK 0xFA +#define PS2_RESEND 0xFE +#define PS2_SET_LED 0xED + +#define PS2_ERR_NONE 0 +#define PS2_ERR_STARTBIT1 1 +#define PS2_ERR_STARTBIT2 2 +#define PS2_ERR_STARTBIT3 3 +#define PS2_ERR_PARITY 0x10 + +#define PS2_LED_SCROLL_LOCK 0 +#define PS2_LED_NUM_LOCK 1 +#define PS2_LED_CAPS_LOCK 2 -/* port settings for clock and data line */ +extern uint8_t ps2_error; + +void ps2_host_init(void); +uint8_t ps2_host_send(uint8_t data); +uint8_t ps2_host_recv_response(void); +uint8_t ps2_host_recv(void); +void ps2_host_set_led(uint8_t usb_led); + + +/* Check port settings for clock and data line */ #if !(defined(PS2_CLOCK_PORT) && \ defined(PS2_CLOCK_PIN) && \ defined(PS2_CLOCK_DDR) && \ @@ -57,27 +105,79 @@ POSSIBILITY OF SUCH DAMAGE. # error "PS/2 data port setting is required in config.h" #endif -#define PS2_ACK 0xFA -#define PS2_RESEND 0xFE -#define PS2_SET_LED 0xED +/*-------------------------------------------------------------------- + * static functions + *------------------------------------------------------------------*/ +static inline void clock_lo(void) +{ + PS2_CLOCK_PORT &= ~(1< + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +#include +#include +#include "ps2.h" +#include "debug.h" + + +/* + * PS/2 protocol busywait version + */ + +#define WAIT(stat, us, err) do { \ + if (!wait_##stat(us)) { \ + ps2_error = err; \ + goto ERROR; \ + } \ +} while (0) + +uint8_t ps2_error = PS2_ERR_NONE; + + +void ps2_host_init(void) +{ + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + _delay_ms(2500); + + inhibit(); +} + +uint8_t ps2_host_send(uint8_t data) +{ + uint8_t res = 0; + bool parity = true; + ps2_error = PS2_ERR_NONE; + /* terminate a transmission if we have */ + inhibit(); + _delay_us(200); // at least 100us + + /* start bit [1] */ + data_lo(); + clock_hi(); + WAIT(clock_lo, 20000, 10); // may take 15ms at most until device starts clocking + /* data [2-9] */ + for (uint8_t i = 0; i < 8; i++) { + _delay_us(15); + if (data&(1< PS2_ERR_STARTBIT3) { + printf("x%02X\n", ps2_error); + } + inhibit(); + return 0; +} From 9d26053f1c14da79336a64f800305660d1a71180 Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 26 Nov 2013 14:31:57 +0900 Subject: [PATCH 04/10] Fix ps2_host_recv_response --- common/print.h | 4 ---- converter/ps2_usb/matrix.c | 10 +++++----- protocol/ps2_busywait.c | 11 +++++++---- 3 files changed, 12 insertions(+), 13 deletions(-) diff --git a/common/print.h b/common/print.h index a828328b6e..930e84be99 100644 --- a/common/print.h +++ b/common/print.h @@ -40,10 +40,6 @@ #endif #define println(s) print_P(PSTR(s "\n")) -#ifndef AVR_LIBC_PRINTF -#define printf(f, ...) xprintf(f, ##__VA_ARGS__) -#endif - /* for old name */ #define pdec(data) print_dec(data) #define pdec16(data) print_dec(data) diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c index a4c27f5d5b..aa0c38c68d 100644 --- a/converter/ps2_usb/matrix.c +++ b/converter/ps2_usb/matrix.c @@ -217,7 +217,7 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_make(code); } else { - printf("unexpected scan code at INIT: %02X\n", code); + xprintf("unexpected scan code at INIT: %02X\n", code); clear_keyboard(); } state = INIT; @@ -239,7 +239,7 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_make(code|0x80); } else { - printf("unexpected scan code at E0: %02X\n", code); + xprintf("unexpected scan code at E0: %02X\n", code); clear_keyboard(); } state = INIT; @@ -259,7 +259,7 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_break(code); } else { - printf("unexpected scan code at F0: %02X\n", code); + xprintf("unexpected scan code at F0: %02X\n", code); clear_keyboard(); } state = INIT; @@ -275,7 +275,7 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_break(code|0x80); } else { - printf("unexpected scan code at E0_F0: %02X\n", code); + xprintf("unexpected scan code at E0_F0: %02X\n", code); clear_keyboard(); } state = INIT; @@ -371,7 +371,7 @@ uint8_t matrix_scan(void) if (ps2_error > PS2_ERR_STARTBIT3) { uint8_t ret = ps2_host_send(PS2_RESEND); - printf("Resend: %02X\n", ret); + xprintf("Resend: %02X\n", ret); } return 1; } diff --git a/protocol/ps2_busywait.c b/protocol/ps2_busywait.c index 1e29258895..5ab377877e 100644 --- a/protocol/ps2_busywait.c +++ b/protocol/ps2_busywait.c @@ -104,6 +104,7 @@ uint8_t ps2_host_send(uint8_t data) WAIT(clock_hi, 50, 8); WAIT(data_hi, 50, 9); + inhibit(); res = ps2_host_recv_response(); ERROR: inhibit(); @@ -113,12 +114,14 @@ ERROR: /* receive data when host want else inhibit communication */ uint8_t ps2_host_recv_response(void) { - // TODO: // Command might take 20ms to response([3]p.21) // TrackPoint might take 25ms ([5]2.7) + // 250 * 100us(wait for start bit in ps2_host_recv) uint8_t data = 0; - uint8_t try = 200; - while (try-- && (data = ps2_host_recv())) ; + uint8_t try = 250; + do { + data = ps2_host_recv(); + } while (try-- && ps2_error); return data; } @@ -172,7 +175,7 @@ uint8_t ps2_host_recv(void) return data; ERROR: if (ps2_error > PS2_ERR_STARTBIT3) { - printf("x%02X\n", ps2_error); + xprintf("x%02X\n", ps2_error); } inhibit(); return 0; From 532e100450615ef1e63e2eed548c38d0c4fa688b Mon Sep 17 00:00:00 2001 From: tmk Date: Thu, 28 Nov 2013 10:42:41 +0900 Subject: [PATCH 05/10] Add ps2_usart.c and fix set_led at USB wake --- protocol/lufa/lufa.c | 4 +- protocol/pjrc/usb.c | 3 +- protocol/ps2.h | 2 + protocol/ps2_usart.c | 146 +++++++------------------------------------ 4 files changed, 29 insertions(+), 126 deletions(-) diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c index 04e8e78f38..eca51c8784 100644 --- a/protocol/lufa/lufa.c +++ b/protocol/lufa/lufa.c @@ -148,7 +148,6 @@ static void Console_Task(void) */ void EVENT_USB_Device_Connect(void) { - led_set(0x1f); // all on } void EVENT_USB_Device_Disconnect(void) @@ -172,8 +171,9 @@ void EVENT_USB_Device_WakeUp() #ifdef SLEEP_LED_ENABLE sleep_led_disable(); -#endif + // NOTE: converters may not accept this led_set(host_keyboard_leds()); +#endif } void EVENT_USB_Device_StartOfFrame(void) diff --git a/protocol/pjrc/usb.c b/protocol/pjrc/usb.c index 84c99972f2..393b36f78e 100644 --- a/protocol/pjrc/usb.c +++ b/protocol/pjrc/usb.c @@ -662,8 +662,9 @@ ISR(USB_GEN_vect) suspend_wakeup_init(); #ifdef SLEEP_LED_ENABLE sleep_led_disable(); -#endif + // NOTE: converters may not accept this led_set(host_keyboard_leds()); +#endif UDIEN |= (1< #include #include @@ -75,18 +58,6 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf uint8_t ps2_error = PS2_ERR_NONE; -static inline void clock_lo(void); -static inline void clock_hi(void); -static inline bool clock_in(void); -static inline void data_lo(void); -static inline void data_hi(void); -static inline bool data_in(void); -static inline uint16_t wait_clock_lo(uint16_t us); -static inline uint16_t wait_clock_hi(uint16_t us); -static inline uint16_t wait_data_lo(uint16_t us); -static inline uint16_t wait_data_hi(uint16_t us); -static inline void idle(void); -static inline void inhibit(void); static inline uint8_t pbuf_dequeue(void); static inline void pbuf_enqueue(uint8_t data); static inline bool pbuf_has_data(void); @@ -95,14 +66,15 @@ static inline void pbuf_clear(void); void ps2_host_init(void) { - idle(); + idle(); // without this many USART errors occur when cable is disconnected PS2_USART_INIT(); PS2_USART_RX_INT_ON(); + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + //_delay_ms(2500); } uint8_t ps2_host_send(uint8_t data) { - uint8_t res = 0; bool parity = true; ps2_error = PS2_ERR_NONE; @@ -144,20 +116,22 @@ uint8_t ps2_host_send(uint8_t data) WAIT(clock_hi, 50, 8); WAIT(data_hi, 50, 9); + idle(); PS2_USART_INIT(); PS2_USART_RX_INT_ON(); - res = ps2_host_recv_response(); + return ps2_host_recv_response(); ERROR: idle(); PS2_USART_INIT(); PS2_USART_RX_INT_ON(); - return res; + return 0; } // Do polling data from keyboard to get response to last command. uint8_t ps2_host_recv_response(void) { - while (!pbuf_has_data()) { + uint8_t retry = 25; + while (retry-- && !pbuf_has_data()) { _delay_ms(1); // without this delay it seems to fall into deadlock } return pbuf_dequeue(); @@ -165,106 +139,32 @@ uint8_t ps2_host_recv_response(void) uint8_t ps2_host_recv(void) { - return pbuf_dequeue(); + if (pbuf_has_data()) { + ps2_error = PS2_ERR_NONE; + return pbuf_dequeue(); + } else { + ps2_error = PS2_ERR_NODATA; + return 0; + } } ISR(PS2_USART_RX_VECT) { - uint8_t error = PS2_USART_ERROR; + // TODO: request RESEND when error occurs? + uint8_t error = PS2_USART_ERROR; // USART error should be read before data uint8_t data = PS2_USART_RX_DATA; if (!error) { pbuf_enqueue(data); + } else { + xprintf("PS2 USART error: %02X data: %02X\n", error, data); } } /* send LED state to keyboard */ void ps2_host_set_led(uint8_t led) { - // send 0xED then keyboard keeps waiting for next LED data - // and keyboard does not send any scan codes during waiting. - // If fail to send LED data keyboard looks like being freezed. - uint8_t retry = 3; - while (retry-- && ps2_host_send(PS2_SET_LED) != PS2_ACK) - ; - retry = 3; - while (retry-- && ps2_host_send(led) != PS2_ACK) - ; -} - - -/*-------------------------------------------------------------------- - * static functions - *------------------------------------------------------------------*/ -static inline void clock_lo() -{ - PS2_CLOCK_PORT &= ~(1< Date: Thu, 28 Nov 2013 14:20:00 +0900 Subject: [PATCH 06/10] Add ps2_interrupt.c --- protocol.mk | 2 +- protocol/ps2_busywait.c | 51 ++-- protocol/{ps2.c => ps2_interrupt.c} | 358 +++++++--------------------- protocol/ps2_usart.c | 23 +- 4 files changed, 124 insertions(+), 310 deletions(-) rename protocol/{ps2.c => ps2_interrupt.c} (51%) diff --git a/protocol.mk b/protocol.mk index e332008731..7f561e62d6 100644 --- a/protocol.mk +++ b/protocol.mk @@ -13,7 +13,7 @@ ifdef PS2_USE_BUSYWAIT endif ifdef PS2_USE_INT - SRC += protocol/ps2.c + SRC += protocol/ps2_interrupt.c OPT_DEFS += -DPS2_USE_INT endif diff --git a/protocol/ps2_busywait.c b/protocol/ps2_busywait.c index 5ab377877e..05dd7b27e6 100644 --- a/protocol/ps2_busywait.c +++ b/protocol/ps2_busywait.c @@ -35,16 +35,16 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* + * PS/2 protocol busywait version + */ + #include #include #include "ps2.h" #include "debug.h" -/* - * PS/2 protocol busywait version - */ - #define WAIT(stat, us, err) do { \ if (!wait_##stat(us)) { \ ps2_error = err; \ @@ -52,6 +52,7 @@ POSSIBILITY OF SUCH DAMAGE. } \ } while (0) + uint8_t ps2_error = PS2_ERR_NONE; @@ -65,18 +66,19 @@ void ps2_host_init(void) uint8_t ps2_host_send(uint8_t data) { - uint8_t res = 0; bool parity = true; ps2_error = PS2_ERR_NONE; + /* terminate a transmission if we have */ inhibit(); - _delay_us(200); // at least 100us + _delay_us(100); // 100us [4]p.13, [5]p.50 - /* start bit [1] */ + /* 'Request to Send' and Start bit */ data_lo(); clock_hi(); - WAIT(clock_lo, 20000, 10); // may take 15ms at most until device starts clocking - /* data [2-9] */ + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + + /* Data bit */ for (uint8_t i = 0; i < 8; i++) { _delay_us(15); if (data&(1< -#include -#include #include #include "ps2.h" #include "debug.h" -#ifndef PS2_USE_INT -static uint8_t recv_data(void); -#endif -static inline void clock_lo(void); -static inline void clock_hi(void); -static inline bool clock_in(void); -static inline void data_lo(void); -static inline void data_hi(void); -static inline bool data_in(void); -static inline uint16_t wait_clock_lo(uint16_t us); -static inline uint16_t wait_clock_hi(uint16_t us); -static inline uint16_t wait_data_lo(uint16_t us); -static inline uint16_t wait_data_hi(uint16_t us); -static inline void idle(void); -static inline void inhibit(void); - - -/* -Primitive PS/2 Library for AVR -============================== -Host side is only supported now. - - -I/O control ------------ -High state is asserted by input with pull up. - - -PS/2 References ---------------- -http://www.computer-engineering.org/ps2protocol/ -http://www.mcamafia.de/pdf/ibm_hitrc07.pdf -*/ - - #define WAIT(stat, us, err) do { \ if (!wait_##stat(us)) { \ ps2_error = err; \ @@ -89,38 +56,38 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf uint8_t ps2_error = PS2_ERR_NONE; +static inline uint8_t pbuf_dequeue(void); +static inline void pbuf_enqueue(uint8_t data); +static inline bool pbuf_has_data(void); +static inline void pbuf_clear(void); + + void ps2_host_init(void) { - // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) - _delay_ms(2500); - -#ifdef PS2_USE_INT + idle(); PS2_INT_INIT(); PS2_INT_ON(); - idle(); -#else - inhibit(); -#endif + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + //_delay_ms(2500); } -// TODO: send using interrupt if available uint8_t ps2_host_send(uint8_t data) { - uint8_t res = 0; bool parity = true; ps2_error = PS2_ERR_NONE; -#ifdef PS2_USE_INT + PS2_INT_OFF(); -#endif + /* terminate a transmission if we have */ inhibit(); - _delay_us(200); // at least 100us + _delay_us(100); // 100us [4]p.13, [5]p.50 - /* start bit [1] */ + /* 'Request to Send' and Start bit */ data_lo(); clock_hi(); - WAIT(clock_lo, 20000, 10); // may take 15ms at most until device starts clocking - /* data [2-9] */ + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + + /* Data bit[2-9] */ for (uint8_t i = 0; i < 8; i++) { _delay_us(15); if (data&(1< Date: Thu, 28 Nov 2013 14:42:41 +0900 Subject: [PATCH 07/10] Fix pin configuration of onekey for PS/2 mouse --- keyboard/onekey/{Makefile.lufa => Makefile} | 4 ++-- keyboard/onekey/README.md | 2 +- keyboard/onekey/config.h | 4 ++-- keyboard/onekey/matrix.c | 18 +++++++++--------- 4 files changed, 14 insertions(+), 14 deletions(-) rename keyboard/onekey/{Makefile.lufa => Makefile} (97%) diff --git a/keyboard/onekey/Makefile.lufa b/keyboard/onekey/Makefile similarity index 97% rename from keyboard/onekey/Makefile.lufa rename to keyboard/onekey/Makefile index 60a84ba00d..78732e470d 100644 --- a/keyboard/onekey/Makefile.lufa +++ b/keyboard/onekey/Makefile @@ -116,8 +116,8 @@ CONSOLE_ENABLE = yes # Console for debug(+400) #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support -PS2_USE_BUSYWAIT = yes # uses primitive reference code +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_BUSYWAIT = yes # uses primitive reference code #PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin #PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) diff --git a/keyboard/onekey/README.md b/keyboard/onekey/README.md index 6ccc999299..7413f3880e 100644 --- a/keyboard/onekey/README.md +++ b/keyboard/onekey/README.md @@ -1,5 +1,5 @@ Onekey ====== -Just one key keyboard for example. It sends 'a' key if pins PD0 and PD1 are short-circuited. +Just one key keyboard for example. It sends 'a' key if pins PB0 and PB1 are short-circuited. https://github.com/tmk/tmk_keyboard/issues/56 diff --git a/keyboard/onekey/config.h b/keyboard/onekey/config.h index 1d2e052bf0..bf1d2b1ed3 100644 --- a/keyboard/onekey/config.h +++ b/keyboard/onekey/config.h @@ -73,7 +73,7 @@ along with this program. If not, see . # define PS2_CLOCK_PORT PORTD # define PS2_CLOCK_PIN PIND # define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 5 +# define PS2_CLOCK_BIT 1 # define PS2_DATA_PORT PORTD # define PS2_DATA_PIN PIND # define PS2_DATA_DDR DDRD @@ -87,7 +87,7 @@ along with this program. If not, see . #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND #define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 +#define PS2_CLOCK_BIT 1 #define PS2_DATA_PORT PORTD #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD diff --git a/keyboard/onekey/matrix.c b/keyboard/onekey/matrix.c index a0a14ff821..29df868321 100644 --- a/keyboard/onekey/matrix.c +++ b/keyboard/onekey/matrix.c @@ -139,29 +139,29 @@ uint8_t matrix_key_count(void) /* Column pin configuration * col: 0 - * pin: D0 + * pin: B0 */ static void init_cols(void) { // Input with pull-up(DDR:0, PORT:1) - DDRD &= ~(1<<0); - PORTD |= (1<<0); + DDRB &= ~(1<<0); + PORTB |= (1<<0); } static matrix_row_t read_cols(void) { - return (PIND&(1<<0) ? 0 : (1<<0)); + return (PINB&(1<<0) ? 0 : (1<<0)); } /* Row pin configuration * row: 0 - * pin: D1 + * pin: B1 */ static void unselect_rows(void) { // Hi-Z(DDR:0, PORT:0) to unselect - DDRD &= ~0b00000010; - PORTD &= ~0b00000010; + DDRB &= ~0b00000010; + PORTB &= ~0b00000010; } static void select_row(uint8_t row) @@ -169,8 +169,8 @@ static void select_row(uint8_t row) // Output low(DDR:1, PORT:0) to select switch (row) { case 0: - DDRD |= (1<<1); - PORTD &= ~(1<<1); + DDRB |= (1<<1); + PORTB &= ~(1<<1); break; } } From 8b4fa599cf485f5d06314938a228a88dabb0b7f5 Mon Sep 17 00:00:00 2001 From: tmk Date: Thu, 28 Nov 2013 14:44:59 +0900 Subject: [PATCH 08/10] Add included header file and fix debug print --- protocol/ps2_interrupt.c | 5 +++-- protocol/ps2_usart.c | 5 ++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/protocol/ps2_interrupt.c b/protocol/ps2_interrupt.c index 355d4e8256..259d254007 100644 --- a/protocol/ps2_interrupt.c +++ b/protocol/ps2_interrupt.c @@ -40,9 +40,10 @@ POSSIBILITY OF SUCH DAMAGE. */ #include +#include #include #include "ps2.h" -#include "debug.h" +#include "print.h" #define WAIT(stat, us, err) do { \ @@ -241,7 +242,7 @@ static inline void pbuf_enqueue(uint8_t data) pbuf[pbuf_head] = data; pbuf_head = next; } else { - debug("pbuf: full\n"); + print("pbuf: full\n"); } SREG = sreg; } diff --git a/protocol/ps2_usart.c b/protocol/ps2_usart.c index 27947143ee..c2d9d0a208 100644 --- a/protocol/ps2_usart.c +++ b/protocol/ps2_usart.c @@ -40,11 +40,10 @@ POSSIBILITY OF SUCH DAMAGE. */ #include -#include #include #include #include "ps2.h" -#include "debug.h" +#include "print.h" #define WAIT(stat, us, err) do { \ @@ -188,7 +187,7 @@ static inline void pbuf_enqueue(uint8_t data) pbuf[pbuf_head] = data; pbuf_head = next; } else { - debug("pbuf: full\n"); + print("pbuf: full\n"); } SREG = sreg; } From 10b2b1ae431b31b2ae29228dcaccb5ea292bbf9a Mon Sep 17 00:00:00 2001 From: tmk Date: Thu, 28 Nov 2013 15:50:17 +0900 Subject: [PATCH 09/10] Fix key stack and PS/2 Overrun --- converter/ps2_usb/config.h | 86 ++++++++++++++++++++------------------ converter/ps2_usb/matrix.c | 33 ++++++++++++--- 2 files changed, 73 insertions(+), 46 deletions(-) diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h index 1ad2bd1b49..c9bab1b072 100644 --- a/converter/ps2_usb/config.h +++ b/converter/ps2_usb/config.h @@ -40,6 +40,52 @@ along with this program. If not, see . ) +//#define NO_SUSPEND_POWER_DOWN + + +/* + * PS/2 Busywait + */ +#ifdef PS2_USE_BUSYWAIT +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 +#endif + +/* + * PS/2 Pin interrupt + */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 +#define PS2_INT_INIT() do { \ + EICRA |= ((1<. #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 2 - /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ @@ -82,7 +127,6 @@ along with this program. If not, see . #define PS2_USART_RX_DATA UDR1 #define PS2_USART_ERROR (UCSR1A & ((1<. #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 0 - /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ @@ -127,41 +170,4 @@ along with this program. If not, see . #endif #endif - -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<. static void matrix_make(uint8_t code); static void matrix_break(uint8_t code); +static void matrix_clear(void); #ifdef MATRIX_HAS_GHOST static bool matrix_has_ghost_in_row(uint8_t row); #endif @@ -84,6 +85,7 @@ uint8_t matrix_cols(void) void matrix_init(void) { + debug_enable = true; ps2_host_init(); // initialize matrix state: all keys off @@ -209,16 +211,18 @@ uint8_t matrix_scan(void) state = INIT; break; case 0x00: // Overrun [3]p.25 - print("Overrun\n"); + matrix_clear(); clear_keyboard(); + print("Overrun\n"); state = INIT; break; default: // normal key make if (code < 0x80) { matrix_make(code); } else { - xprintf("unexpected scan code at INIT: %02X\n", code); + matrix_clear(); clear_keyboard(); + xprintf("unexpected scan code at INIT: %02X\n", code); } state = INIT; } @@ -239,8 +243,9 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_make(code|0x80); } else { - xprintf("unexpected scan code at E0: %02X\n", code); + matrix_clear(); clear_keyboard(); + xprintf("unexpected scan code at E0: %02X\n", code); } state = INIT; } @@ -255,12 +260,18 @@ uint8_t matrix_scan(void) matrix_break(PRINT_SCREEN); state = INIT; break; + case 0xF0: + matrix_clear(); + clear_keyboard(); + xprintf("unexpected scan code at F0: F0(clear and cont.)\n"); + break; default: if (code < 0x80) { matrix_break(code); } else { - xprintf("unexpected scan code at F0: %02X\n", code); + matrix_clear(); clear_keyboard(); + xprintf("unexpected scan code at F0: %02X\n", code); } state = INIT; } @@ -275,8 +286,9 @@ uint8_t matrix_scan(void) if (code < 0x80) { matrix_break(code|0x80); } else { - xprintf("unexpected scan code at E0_F0: %02X\n", code); + matrix_clear(); clear_keyboard(); + xprintf("unexpected scan code at E0_F0: %02X\n", code); } state = INIT; } @@ -369,10 +381,13 @@ uint8_t matrix_scan(void) } } - if (ps2_error > PS2_ERR_STARTBIT3) { + // TODO: request RESEND when error occurs? +/* + if (PS2_IS_FAILED(ps2_error)) { uint8_t ret = ps2_host_send(PS2_RESEND); xprintf("Resend: %02X\n", ret); } +*/ return 1; } @@ -464,3 +479,9 @@ static void matrix_break(uint8_t code) is_modified = true; } } + +inline +static void matrix_clear(void) +{ + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; +} From 0b9c0f6012a90eeb8cced9feccf3a65d8b4e5535 Mon Sep 17 00:00:00 2001 From: tmk Date: Thu, 28 Nov 2013 16:00:16 +0900 Subject: [PATCH 10/10] Add new keymap file --- converter/ps2_usb/Makefile.pjrc | 75 ++++++ converter/ps2_usb/keymap.c | 379 ------------------------------ converter/ps2_usb/keymap_common.c | 30 +++ converter/ps2_usb/keymap_common.h | 174 ++++++++++++++ converter/ps2_usb/keymap_plain.c | 50 ++++ 5 files changed, 329 insertions(+), 379 deletions(-) create mode 100644 converter/ps2_usb/Makefile.pjrc delete mode 100644 converter/ps2_usb/keymap.c create mode 100644 converter/ps2_usb/keymap_common.c create mode 100644 converter/ps2_usb/keymap_common.h create mode 100644 converter/ps2_usb/keymap_plain.c diff --git a/converter/ps2_usb/Makefile.pjrc b/converter/ps2_usb/Makefile.pjrc new file mode 100644 index 0000000000..0e175f8b45 --- /dev/null +++ b/converter/ps2_usb/Makefile.pjrc @@ -0,0 +1,75 @@ +# Target file name (without extension). +TARGET = ps2_usb_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover + + +# PS/2 Options +# +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +PS2_USE_BUSYWAIT = yes # uses primitive reference code + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + + +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/ps2_usb/keymap.c b/converter/ps2_usb/keymap.c deleted file mode 100644 index c97783fa53..0000000000 --- a/converter/ps2_usb/keymap.c +++ /dev/null @@ -1,379 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * Keymap for PS/2 keyboard - */ -#include -#include -#include -#include "keycode.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap.h" - - - - -// Following macros help you to define a keymap with the form of actual keyboard layout. - -/* US layout plus all other various keys */ -#define KEYMAP_ALL( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ - \ - K61, /* for European ISO */ \ - K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ - K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ - KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ - KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ - KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ - KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ - K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ - KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ -) { \ - { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ - { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ - { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \ - { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ - { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \ - { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \ - { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \ - { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ - { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \ - { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \ - { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \ - { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \ - { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \ - { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \ - { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \ - { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \ - { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \ -} - -/* US layout */ -#define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layout */ -#define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layout */ -#define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ssign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 5, // Fn0 - 6, // Fn1 - 0, // Fn2 - 0, // Fn3 - 0, // Fn4 - 0, // Fn5 - 0, // Fn6 - 0 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KC_SCLN, // Fn0 - KC_SLSH, // Fn1 - KC_NO, // Fn2 - KC_NO, // Fn3 - KC_NO, // Fn4 - KC_NO, // Fn5 - KC_NO, // Fn6 - KC_NO // Fn7 -}; - - -// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode. -// See keycode.h for USB keycodes. You should omit a 'KC_' prefix of USB keycodes in keymap macro. -// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS. -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: default - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| - * `---' `---------------' `---------------' `---------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | - * |-----------------------------------------------------------| `-----------' |-----------| +| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - * ; = Fn0(to Layer 5) - * / = Fn1(to Layer 6) - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 1: plain Qwerty without layer switching - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 2: Colemak http://colemak.com - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| - * |-----------------------------------------------------------| - * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| - * |-----------------------------------------------------------| - * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| - * |-----------------------------------------------------------| - * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | - * |-----------------------------------------------------------| - * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS, - LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 5: Mouse keys - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| - * |-----------------------------------------------------------| - * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| - * |-----------------------------------------------------------| - * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | - * |-----------------------------------------------------------| - * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button - * Vo = Volume, Mut = Mute - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 6: Cursor keys - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| - * |-----------------------------------------------------------| - * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| - * |-----------------------------------------------------------| - * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); -} - -uint8_t keymap_fn_layer(uint8_t index) -{ - return pgm_read_byte(&fn_layer[index]); -} - -uint8_t keymap_fn_keycode(uint8_t index) -{ - return pgm_read_byte(&fn_keycode[index]); -} diff --git a/converter/ps2_usb/keymap_common.c b/converter/ps2_usb/keymap_common.c new file mode 100644 index 0000000000..241d2e33b1 --- /dev/null +++ b/converter/ps2_usb/keymap_common.c @@ -0,0 +1,30 @@ +/* +Copyright 2011,2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/converter/ps2_usb/keymap_common.h b/converter/ps2_usb/keymap_common.h new file mode 100644 index 0000000000..216a8dc020 --- /dev/null +++ b/converter/ps2_usb/keymap_common.h @@ -0,0 +1,174 @@ +/* +Copyright 2011,2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +// 32*8(256) byte array which converts PS/2 code into USB code +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +/* All keys */ +#define KEYMAP_ALL( \ + K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ + K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ + K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ + K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ + K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ + K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ + \ + K61, /* for European ISO */ \ + K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ + K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ + KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ + KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ + KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ + KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ + K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ + KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ +) { \ + { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ + { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \ + { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ + { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \ + { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \ + { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \ + { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ + { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \ + { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \ + { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \ + { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \ + { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \ + { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \ + { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \ + { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \ + { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \ +} + +/* US layout */ +#define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layout */ +#define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layout */ +#define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endif diff --git a/converter/ps2_usb/keymap_plain.c b/converter/ps2_usb/keymap_plain.c new file mode 100644 index 0000000000..9c6e7d9ff1 --- /dev/null +++ b/converter/ps2_usb/keymap_plain.c @@ -0,0 +1,50 @@ +/* +Copyright 2011,2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "keymap_common.h" + + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| + * `---' `---------------' `---------------' `---------------' `-----------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + * ; = Fn0(to Layer 5) + * / = Fn1(to Layer 6) + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +};