1
0
Fork 0

Add replacement screw specifications to GMMK Pro readme (#13903)

This commit is contained in:
Gigahawk 2021-08-06 04:54:43 -07:00 committed by GitHub
parent c588d232cb
commit bdf86c4cbd
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -21,3 +21,17 @@ To reset the board into bootloader mode, do one of the following:
* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap * Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Case Screw Replacements
Many users report stripped case screws when disassembling the board.
The stock case screws are:
* Thread: M2
* Thread length: ~5 mm
* Head diameter: ~3.8 mm
* Head counterbore diameter: ~4.0 mm
* Head counterbore depth: ~1.9 mm
Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).