1
0
Fork 0

[Keyboard] Add TouhouPad (#13915)

* Touhoupad rev 2

* cleanup for PR

* fixes after review
This commit is contained in:
Michele Ferri 2021-08-09 19:04:00 +02:00 committed by GitHub
parent e6c171bdd6
commit be72a64cf6
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
8 changed files with 170 additions and 0 deletions

View file

@ -0,0 +1,52 @@
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xD00D
#define PRODUCT_ID 0x0031
#define DEVICE_VER 0x0001
#define MANUFACTURER Pimentoso
#define PRODUCT TouhouPad rev2
#define MATRIX_ROWS 1
#define MATRIX_COLS 10
#define MATRIX_ROW_PINS { D4 }
#define MATRIX_COL_PINS { C6,D7,E6,B4,B6,B2,B3,B1,F7,F6 }
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#define DEBOUNCE 5

View file

@ -0,0 +1,12 @@
{
"keyboard_name": "TouhouPad",
"url": "https://github.com/Pimentoso/TouhouPad_v2",
"maintainer": "Pimentoso",
"width": 8.25,
"height": 4,
"layouts": {
"LAYOUT": {
"layout": [{"label":"esc", "x":5.25, "y":0}, {"label":"enter", "x":6.25, "y":0}, {"label":"slow", "x":0, "y":1}, {"label":"fire", "x":1, "y":1}, {"label":"rapid", "x":2, "y":1}, {"label":"up", "x":6.25, "y":1.75}, {"label":"left", "x":5.25, "y":2.75}, {"label":"down", "x":6.25, "y":2.75}, {"label":"right", "x":7.25, "y":2.75}, {"label":"bomb", "x":3.25, "y":3}]
}
}
}

View file

@ -0,0 +1,25 @@
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT( /* Base */
KC_LSFT, KC_Z, KC_C, KC_X, KC_LEFT, KC_DOWN, KC_RIGHT, KC_UP, KC_ENT, LT(1, KC_ESC)
),
LAYOUT( /* RGB controls */
KC_NO, KC_NO, KC_NO, KC_NO, RGB_TOG, RGB_VAD, RGB_MOD, RGB_VAI, KC_NO, KC_NO
)
};

View file

@ -0,0 +1 @@
# The default keymap for 4pack

View file

@ -0,0 +1,19 @@
# TouhouPad
![TouhouPad](https://i.imgur.com/JeEqeEs.png)
A 10 key gamepad specifically for playing Touhou danmaku games.
You can find building instructions and gerber files to print the circuit board on the [project page.](https://github.com/Pimentoso/TouhouPad_v2)
* Keyboard Maintainer: [Michele Ferri](https://github.com/Pimentoso)
* Hardware Supported: Paddino02 PCB rev1, rev2 + Arduino Pro Micro
* Hardware Availability: the PCB is open source and can be freely printed at websites such as [JLCPCB](https://jlcpcb.com/)
Make example for this keyboard (after setting up your build environment):
make pimentoso/touhoupad:default
The gamepad case is completely exposed on the underside, so to enter bootloader mode, just short the RST and GND pins of the pro micro using a metal object.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,22 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output

View file

@ -0,0 +1,16 @@
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "touhoupad.h"

View file

@ -0,0 +1,23 @@
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT(k00, k01, k02, k03, k04, k05, k06, k07, k08, k09) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 } \
}