Merge remote-tracking branch 'origin/master' into develop

keyboards/soup10/config.h

@@ -0,0 +1,153 @@
+/*
+Copyright 2021 icesoup
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x5375
+#define PRODUCT_ID   0x0001
+#define DEVICE_VER   0x0001
+#define MANUFACTURER icesoup
+#define PRODUCT      soup10
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+//                        0   1   2   3
+#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 1

keyboards/soup10/info.json

@@ -0,0 +1,23 @@
+{
+    "keyboard_name": "Soup10",
+    "url": "https://github.com/Sadeeed/soup10",
+    "maintainer": "Sadeeed",
+    "width": 3,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K01 (D1,E6)", "x":1, "y":0},
+                {"label":"K10 (D0,D7)", "x":0, "y":1},
+                {"label":"K11 (D0,E6)", "x":1, "y":1},
+                {"label":"K12 (D0,B4)", "x":2, "y":1},
+                {"label":"K20 (D4,D7)", "x":0, "y":2},
+                {"label":"K21 (D4,E6)", "x":1, "y":2},
+                {"label":"K22 (D4,B4)", "x":2, "y":2},
+                {"label":"K30 (C6,D7)", "x":0, "y":3},
+                {"label":"K31 (C6,E6)", "x":1, "y":3},
+                {"label":"K32 (C6,B4)", "x":2, "y":3}
+            ]
+        }
+    }
+}

keyboards/soup10/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 icesoup
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_F13, 
+        KC_F14, KC_F15, KC_F16, 
+        KC_F17, KC_F18, KC_F19, 
+        KC_F20, KC_F21, MO(_FN)),
+
+    [_FN] = LAYOUT(
+        RESET, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS)
+};

keyboards/soup10/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for soup10

keyboards/soup10/keymaps/via/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2021 icesoup
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [0] = LAYOUT(
+        KC_A, 
+        KC_B, KC_C, KC_D, 
+        KC_E, KC_F, KC_G, 
+        KC_H, KC_I, KC_J),
+
+    [1] = LAYOUT(
+        KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [2] = LAYOUT(
+        KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS),
+    
+    [3] = LAYOUT(
+        KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS)
+        
+};

keyboards/soup10/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/soup10/readme.md

@@ -0,0 +1,19 @@
+# soup10
+
+![soup10](https://i.imgur.com/YIMB3kKl.jpg)
+
+A 4x3 10 key macropad by Sadeed aka icesoup
+
+* Keyboard Maintainer: [icesoup](https://github.com/Sadeeed)
+* Hardware Supported: Pro Micro
+* Hardware Availability: [Repository](https://github.com/Sadeeed/Soup10)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make soup10:default
+
+Flashing example for this keyboard:
+
+    make soup10:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/soup10/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes

keyboards/soup10/soup10.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 icesoup
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "soup10.h"

keyboards/soup10/soup10.h

@@ -0,0 +1,39 @@
+/* Copyright 2021 icesoup
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+         K01,      \
+    K10, K11, K12, \
+    K20, K21, K22, \
+    K30, K31, K32  \
+) { \
+    { KC_NO, K01,   KC_NO }, \
+    { K10,   K11,   K12 }, \
+    { K20,   K21,   K22 }, \
+    { K30,   K31,   K32 }  \
+}