diff --git a/common_features.mk b/common_features.mk
index 56a9a286ea..fed005ff5a 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -356,7 +356,7 @@ endif
ifeq ($(strip $(PRINTING_ENABLE)), yes)
OPT_DEFS += -DPRINTING_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
- SRC += $(TMK_DIR)/protocol/serial_uart.c
+ QUANTUM_LIB_SRC += uart.c
endif
VARIABLE_TRACE ?= no
diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c
index 0fa7838dfd..4eb2c190c1 100644
--- a/keyboards/40percentclub/ut47/keymaps/default/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/default/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -108,11 +108,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
index 0c1c2e7599..8a0ba7b391 100644
--- a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -108,11 +108,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
index 52372e2857..5e79cdb9a4 100644
--- a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
@@ -151,11 +151,11 @@ LAYOUT( /* GAMING, toggled on and off - L5 */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
index ae8ad3e378..75dba3a2d4 100644
--- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -60,11 +60,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c
index c1284535bc..89537592c5 100644
--- a/keyboards/40percentclub/ut47/matrix.c
+++ b/keyboards/40percentclub/ut47/matrix.c
@@ -26,10 +26,6 @@ along with this program. If not, see .
#include "debug.h"
#include "util.h"
#include "matrix.h"
-#ifdef LED_ENABLE
- #include "protocol/serial.h"
-#endif
-
#ifndef DEBOUNCE
# define DEBOUNCE 5
@@ -69,10 +65,6 @@ void matrix_init(void)
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
-
-#ifdef LED_ENABLE
- serial_init();
-#endif
}
uint8_t matrix_scan(void)
diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk
index 29cee474ff..6c9805e0fc 100644
--- a/keyboards/40percentclub/ut47/rules.mk
+++ b/keyboards/40percentclub/ut47/rules.mk
@@ -18,4 +18,5 @@ AUDIO_ENABLE = no # Audio output
# custom matrix setup
CUSTOM_MATRIX = yes
-SRC += matrix.c protocol/serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/40percentclub/ut47/ut47.c b/keyboards/40percentclub/ut47/ut47.c
index 9054335e5a..c01562cb68 100644
--- a/keyboards/40percentclub/ut47/ut47.c
+++ b/keyboards/40percentclub/ut47/ut47.c
@@ -15,15 +15,19 @@
*/
#include "ut47.h"
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
+void matrix_init_kb() {
+ uart_init(9600);
+}
+
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
if (record->event.pressed) {
#ifdef LED_ENABLE
- serial_send((record->event.key.row*16)+record->event.key.col);
+ uart_write((record->event.key.row*16)+record->event.key.col);
#endif
}
return process_record_user(keycode, record);
diff --git a/keyboards/centromere/config.h b/keyboards/centromere/config.h
index e502e2534b..b4cae20332 100644
--- a/keyboards/centromere/config.h
+++ b/keyboards/centromere/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 500000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c
index 7256cd5cb5..a46701275a 100644
--- a/keyboards/centromere/matrix.c
+++ b/keyboards/centromere/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -80,7 +80,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(500000);
}
uint8_t matrix_scan(void)
@@ -88,7 +88,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF remote slave to send the matrix information
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates, erase the last set of data
uint8_t uart_data[11] = {0};
@@ -96,13 +96,13 @@ uint8_t matrix_scan(void)
//there are 10 bytes corresponding to 1w columns, and an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/centromere/rules.mk b/keyboards/centromere/rules.mk
index ed777e1b9e..15c6a20746 100644
--- a/keyboards/centromere/rules.mk
+++ b/keyboards/centromere/rules.mk
@@ -21,6 +21,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = yes # Unicode
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
LAYOUTS = split_3x5_3 split_3x6_3
diff --git a/keyboards/chimera_ergo/config.h b/keyboards/chimera_ergo/config.h
index 0767a218b5..3c0cc5c162 100644
--- a/keyboards/chimera_ergo/config.h
+++ b/keyboards/chimera_ergo/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c
index 577176c466..ec438beb56 100644
--- a/keyboards/chimera_ergo/matrix.c
+++ b/keyboards/chimera_ergo/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -89,7 +89,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -97,7 +97,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
@@ -107,13 +107,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk
index a8bd3a027a..483485cb7d 100644
--- a/keyboards/chimera_ergo/rules.mk
+++ b/keyboards/chimera_ergo/rules.mk
@@ -17,4 +17,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/chimera_ls/config.h b/keyboards/chimera_ls/config.h
index 2eb028471d..ca92e1e2e4 100644
--- a/keyboards/chimera_ls/config.h
+++ b/keyboards/chimera_ls/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c
index 9edd91818f..354346ca09 100644
--- a/keyboards/chimera_ls/matrix.c
+++ b/keyboards/chimera_ls/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -93,7 +93,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -101,7 +101,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -111,13 +111,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk
index 377c379911..ae0cc8b749 100644
--- a/keyboards/chimera_ls/rules.mk
+++ b/keyboards/chimera_ls/rules.mk
@@ -17,7 +17,8 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
LAYOUTS = ortho_4x12
diff --git a/keyboards/chimera_ortho/config.h b/keyboards/chimera_ortho/config.h
index 974502525c..3d86343a67 100644
--- a/keyboards/chimera_ortho/config.h
+++ b/keyboards/chimera_ortho/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c
index 34930af7e2..1403f410c0 100644
--- a/keyboards/chimera_ortho/matrix.c
+++ b/keyboards/chimera_ortho/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -79,7 +79,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -87,7 +87,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -97,13 +97,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk
index fbe6872001..c35dc9ba2e 100644
--- a/keyboards/chimera_ortho/rules.mk
+++ b/keyboards/chimera_ortho/rules.mk
@@ -17,4 +17,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/chimera_ortho_plus/config.h b/keyboards/chimera_ortho_plus/config.h
index 4b12796e95..ebffb85657 100644
--- a/keyboards/chimera_ortho_plus/config.h
+++ b/keyboards/chimera_ortho_plus/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c
index 818e05ac98..51898e35d1 100644
--- a/keyboards/chimera_ortho_plus/matrix.c
+++ b/keyboards/chimera_ortho_plus/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -79,7 +79,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -87,7 +87,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
@@ -97,13 +97,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk
index e99e79c327..cd98979306 100644
--- a/keyboards/chimera_ortho_plus/rules.mk
+++ b/keyboards/chimera_ortho_plus/rules.mk
@@ -20,4 +20,5 @@ UNICODE_ENABLE = yes
CUSTOM_MATRIX = yes
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h
index 067dabb103..5ea40c14c5 100644
--- a/keyboards/comet46/config.h
+++ b/keyboards/comet46/config.h
@@ -62,12 +62,3 @@ along with this program. If not, see .
#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL))
#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c
index 34930af7e2..1403f410c0 100644
--- a/keyboards/comet46/matrix.c
+++ b/keyboards/comet46/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -79,7 +79,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -87,7 +87,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -97,13 +97,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk
index 814622226a..10d828cc7f 100644
--- a/keyboards/comet46/rules.mk
+++ b/keyboards/comet46/rules.mk
@@ -19,5 +19,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# project specific files
SRC += matrix.c \
i2c.c \
- ssd1306.c \
- serial_uart.c
+ ssd1306.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h
index 4afc654e85..35032835cd 100644
--- a/keyboards/converter/palm_usb/config.h
+++ b/keyboards/converter/palm_usb/config.h
@@ -60,58 +60,3 @@ along with this program. If not, see .
get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-
-
-/* Serial(USART) configuration
- * asynchronous, negative logic, 9600baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD 9600
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#if (HANDSPRING == 0)
- #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic
-#endif
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-
-// we are using Pro micro pin 3 / D0 as serial
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 0
-#define SERIAL_SOFT_RXD_VECT INT0_vect
-
-/* RXD Interupt */
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
#include "timer.h"
@@ -164,7 +164,7 @@ uint8_t rts_reset(void) {
uint8_t get_serial_byte(void) {
static uint8_t code;
while(1) {
- code = serial_recv();
+ code = uart_read();
if (code) {
debug_hex(code); debug(" ");
return code;
@@ -240,7 +240,7 @@ void matrix_init(void)
debug_enable = true;
//debug_matrix =true;
- serial_init(); // arguments all #defined
+ uart_init(9600); // arguments all #defined
#if (HANDSPRING == 0)
pins_init(); // set all inputs and outputs.
@@ -290,7 +290,7 @@ void matrix_init(void)
uint8_t matrix_scan(void)
{
uint8_t code;
- code = serial_recv();
+ code = uart_read();
if (!code) {
/*
disconnect_counter ++;
diff --git a/keyboards/converter/palm_usb/post_rules.mk b/keyboards/converter/palm_usb/post_rules.mk
deleted file mode 100644
index 9c11076701..0000000000
--- a/keyboards/converter/palm_usb/post_rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-ifdef HARDWARE_SERIAL
- # Untested with palm_usb
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
-else
- SRC += protocol/serial_soft.c
-endif
diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk
index c5e680b883..a1d2e39b23 100644
--- a/keyboards/converter/palm_usb/rules.mk
+++ b/keyboards/converter/palm_usb/rules.mk
@@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
CUSTOM_MATRIX = yes
SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = converter/palm_usb/stowaway
diff --git a/keyboards/converter/sun_usb/command_extra.c b/keyboards/converter/sun_usb/command_extra.c
index 756a9160bb..332776ab90 100644
--- a/keyboards/converter/sun_usb/command_extra.c
+++ b/keyboards/converter/sun_usb/command_extra.c
@@ -1,5 +1,5 @@
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
bool sun_bell = false;
bool sun_click = false;
@@ -20,41 +20,41 @@ bool command_extra(uint8_t code)
return false;
case KC_DEL:
print("Reset\n");
- serial_send(0x01);
+ uart_write(0x01);
break;
case KC_HOME:
sun_bell = !sun_bell;
if (sun_bell) {
print("Bell On\n");
- serial_send(0x02);
+ uart_write(0x02);
} else {
print("Bell Off\n");
- serial_send(0x03);
+ uart_write(0x03);
}
break;
case KC_END:
sun_click = !sun_click;
if (sun_click) {
print("Click On\n");
- serial_send(0x0A);
+ uart_write(0x0A);
} else {
print("Click Off\n");
- serial_send(0x0B);
+ uart_write(0x0B);
}
break;
case KC_PGUP:
print("LED all on\n");
- serial_send(0x0E);
- serial_send(0xFF);
+ uart_write(0x0E);
+ uart_write(0xFF);
break;
case KC_PGDOWN:
print("LED all off\n");
- serial_send(0x0E);
- serial_send(0x00);
+ uart_write(0x0E);
+ uart_write(0x00);
break;
case KC_INSERT:
print("layout\n");
- serial_send(0x0F);
+ uart_write(0x0F);
break;
default:
xprintf("Unknown extra command: %02X\n", code);
diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h
index c67ae5ebae..0a4aa019f7 100644
--- a/keyboards/converter/sun_usb/config.h
+++ b/keyboards/converter/sun_usb/config.h
@@ -33,50 +33,3 @@ along with this program. If not, see .
get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-
-
-/* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD 1200
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#define SERIAL_SOFT_LOGIC_NEGATIVE
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 2
-#define SERIAL_SOFT_RXD_VECT INT2_vect
-/* RXD Interupt */
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
void led_set(uint8_t usb_led)
{
@@ -27,6 +27,6 @@ void led_set(uint8_t usb_led)
if (usb_led & (1<.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
/*
* Matrix Array usage:
@@ -74,7 +74,7 @@ void matrix_init(void)
/* PORTD |= (1<<6); */
debug_enable = true;
- serial_init();
+ uart_init(1200);
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
@@ -84,12 +84,12 @@ void matrix_init(void)
/* print("Reseting "); */
/* while (1) { */
/* print("."); */
- /* while (serial_recv()); */
- /* serial_send(0x01); */
+ /* while (uart_read()); */
+ /* uart_write(0x01); */
/* _delay_ms(500); */
- /* if (serial_recv() == 0xFF) { */
+ /* if (uart_read() == 0xFF) { */
/* _delay_ms(500); */
- /* if (serial_recv() == 0x04) */
+ /* if (uart_read() == 0x04) */
/* break; */
/* } */
/* } */
@@ -104,7 +104,7 @@ void matrix_init(void)
uint8_t matrix_scan(void)
{
uint8_t code;
- code = serial_recv();
+ code = uart_read();
if (!code) return 0;
debug_hex(code); debug(" ");
@@ -113,7 +113,7 @@ uint8_t matrix_scan(void)
case 0xFF: // reset success: FF 04
print("reset: ");
_delay_ms(500);
- code = serial_recv();
+ code = uart_read();
xprintf("%02X\n", code);
if (code == 0x04) {
// LED status
@@ -123,12 +123,12 @@ uint8_t matrix_scan(void)
case 0xFE: // layout: FE
print("layout: ");
_delay_ms(500);
- xprintf("%02X\n", serial_recv());
+ xprintf("%02X\n", uart_read());
return 0;
case 0x7E: // reset fail: 7E 01
print("reset fail: ");
_delay_ms(500);
- xprintf("%02X\n", serial_recv());
+ xprintf("%02X\n", uart_read());
return 0;
case 0x7F:
// all keys up
diff --git a/keyboards/converter/sun_usb/post_rules.mk b/keyboards/converter/sun_usb/post_rules.mk
deleted file mode 100644
index 2ea1f0a5bf..0000000000
--- a/keyboards/converter/sun_usb/post_rules.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-ifdef HARDWARE_SERIAL
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
-else
- SRC += protocol/serial_soft.c
-endif
diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk
index 2f2ddde1d0..d25bcc7ffa 100644
--- a/keyboards/converter/sun_usb/rules.mk
+++ b/keyboards/converter/sun_usb/rules.mk
@@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
CUSTOM_MATRIX = yes
SRC += matrix.c led.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = converter/sun_usb/type5
diff --git a/keyboards/dichotomy/config.h b/keyboards/dichotomy/config.h
index 03e19b1388..40e7f18e6f 100644
--- a/keyboards/dichotomy/config.h
+++ b/keyboards/dichotomy/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c
index 967d7e603c..afd52cc8b3 100755
--- a/keyboards/dichotomy/dichotomy.c
+++ b/keyboards/dichotomy/dichotomy.c
@@ -1,11 +1,13 @@
#include "dichotomy.h"
+//#include "uart.h"
+
void pointing_device_task(void){
/*report_mouse_t currentReport = {};
uint32_t timeout = 0;
//the m character requests the RF slave to send the mouse report
- SERIAL_UART_DATA = 'm';
+ uart_write('m');
//trust the external inputs completely, erase old data
uint8_t uart_data[5] = {0};
@@ -15,7 +17,7 @@ void pointing_device_task(void){
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTIMED OUT");
@@ -23,7 +25,7 @@ void pointing_device_task(void){
}
}
xprintf("\r\nGOT DATA for %d",i);
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, bytes 1-4 are movement and scroll
diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c
index ed83bd452c..806b66d498 100755
--- a/keyboards/dichotomy/matrix.c
+++ b/keyboards/dichotomy/matrix.c
@@ -29,7 +29,7 @@ along with this program. If not, see .
#include "dichotomy.h"
#include "pointing_device.h"
#include "report.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -94,7 +94,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -104,7 +104,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -114,14 +114,14 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTime out in keyboard.");
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk
index 2b5eb0360c..a6029e3dbf 100755
--- a/keyboards/dichotomy/rules.mk
+++ b/keyboards/dichotomy/rules.mk
@@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/honeycomb/config.h b/keyboards/honeycomb/config.h
index 725f9490cb..c959543618 100755
--- a/keyboards/honeycomb/config.h
+++ b/keyboards/honeycomb/config.h
@@ -45,12 +45,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/honeycomb/honeycomb.c b/keyboards/honeycomb/honeycomb.c
index 1254196d39..603400c7a3 100755
--- a/keyboards/honeycomb/honeycomb.c
+++ b/keyboards/honeycomb/honeycomb.c
@@ -7,7 +7,7 @@ void pointing_device_task(void){
uint32_t timeout = 0;
//the m character requests the RF slave to send the mouse report
- SERIAL_UART_DATA = 'm';
+ uart_write('m');
//trust the external inputs completely, erase old data
uint8_t uart_data[5] = {0};
@@ -17,7 +17,7 @@ void pointing_device_task(void){
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTIMED OUT");
@@ -25,7 +25,7 @@ void pointing_device_task(void){
}
}
xprintf("\r\nGOT DATA for %d",i);
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, bytes 1-4 are movement and scroll
diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c
index 7fef6f0fd8..fe1e4ce8ff 100755
--- a/keyboards/honeycomb/matrix.c
+++ b/keyboards/honeycomb/matrix.c
@@ -30,7 +30,7 @@ along with this program. If not, see .
#include "honeycomb.h"
#include "pointing_device.h"
#include "report.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -95,7 +95,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -103,7 +103,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
// The 's' character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
// Trust the external keystates entirely, erase the last data
uint8_t uart_data[4] = {0};
@@ -113,14 +113,14 @@ uint8_t matrix_scan(void)
// Wait for the serial data, timeout if it's been too long
// This only happened in testing with a loose wire, but does no
// harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTime out in keyboard.");
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
// Check for the end packet, it's our checksum.
diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk
index 2b5eb0360c..a6029e3dbf 100755
--- a/keyboards/honeycomb/rules.mk
+++ b/keyboards/honeycomb/rules.mk
@@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/mitosis/config.h b/keyboards/mitosis/config.h
index 94e84e680e..2c72eed5f2 100644
--- a/keyboards/mitosis/config.h
+++ b/keyboards/mitosis/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see .
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c
index 71c372a3ce..102431eb67 100644
--- a/keyboards/mitosis/matrix.c
+++ b/keyboards/mitosis/matrix.c
@@ -26,7 +26,7 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -80,7 +80,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -88,7 +88,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -98,13 +98,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk
index 6c7aa30d88..04cafae718 100644
--- a/keyboards/mitosis/rules.mk
+++ b/keyboards/mitosis/rules.mk
@@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
UNICODE_ENABLE = yes # Unicode
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h
index 4ae9ced258..dd9d6a9d25 100644
--- a/keyboards/planck/keymaps/thermal_printer/config.h
+++ b/keyboards/planck/keymaps/thermal_printer/config.h
@@ -1,9 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define SERIAL_UART_BAUD 19200
+#pragma once
/*
* MIDI options
@@ -21,8 +16,3 @@
- etc.
*/
//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
- #endif
\ No newline at end of file
diff --git a/keyboards/redox_w/config.h b/keyboards/redox_w/config.h
index b480b072f9..c4aeb32d58 100644
--- a/keyboards/redox_w/config.h
+++ b/keyboards/redox_w/config.h
@@ -55,12 +55,3 @@
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c
index 703987a939..752324837c 100644
--- a/keyboards/redox_w/matrix.c
+++ b/keyboards/redox_w/matrix.c
@@ -24,7 +24,7 @@
#include "util.h"
#include "matrix.h"
#include "timer.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -87,7 +87,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -95,7 +95,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -105,13 +105,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk
index a8bd3a027a..483485cb7d 100644
--- a/keyboards/redox_w/rules.mk
+++ b/keyboards/redox_w/rules.mk
@@ -17,4 +17,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/sirius/uni660/rev1/config.h b/keyboards/sirius/uni660/rev1/config.h
index 91d7c5d7a3..f9815844cb 100644
--- a/keyboards/sirius/uni660/rev1/config.h
+++ b/keyboards/sirius/uni660/rev1/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see .
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c
index 2db6767a46..65c35c968b 100644
--- a/keyboards/sirius/uni660/rev1/matrix.c
+++ b/keyboards/sirius/uni660/rev1/matrix.c
@@ -27,7 +27,7 @@ along with this program. If not, see .
#include "matrix.h"
#include "timer.h"
#include "debounce.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -81,7 +81,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
debounce_init(MATRIX_ROWS);
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -91,7 +91,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[17] = {0};
@@ -101,13 +101,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk
index 836bf6b442..77b9af362e 100644
--- a/keyboards/sirius/uni660/rev1/rules.mk
+++ b/keyboards/sirius/uni660/rev1/rules.mk
@@ -20,4 +20,5 @@ UNICODE_ENABLE = yes # Unicode
CUSTOM_MATRIX = yes
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h
index 13e33ebf11..8777dc4011 100644
--- a/keyboards/sirius/uni660/rev2/ansi/config.h
+++ b/keyboards/sirius/uni660/rev2/ansi/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see .
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h
index 3283f0cd67..763230dca8 100644
--- a/keyboards/sirius/uni660/rev2/iso/config.h
+++ b/keyboards/sirius/uni660/rev2/iso/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see .
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c
index 2db6767a46..65c35c968b 100644
--- a/keyboards/sirius/uni660/rev2/matrix.c
+++ b/keyboards/sirius/uni660/rev2/matrix.c
@@ -27,7 +27,7 @@ along with this program. If not, see .
#include "matrix.h"
#include "timer.h"
#include "debounce.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -81,7 +81,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
debounce_init(MATRIX_ROWS);
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -91,7 +91,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[17] = {0};
@@ -101,13 +101,13 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/sirius/uni660/rev2/rules.mk b/keyboards/sirius/uni660/rev2/rules.mk
index 0abebb07c6..f3ff80d92e 100644
--- a/keyboards/sirius/uni660/rev2/rules.mk
+++ b/keyboards/sirius/uni660/rev2/rules.mk
@@ -20,6 +20,7 @@ UNICODE_ENABLE = yes # Unicode
CUSTOM_MATRIX = yes
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = sirius/uni660/rev2/ansi
diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h
index 51718da9d4..837bb8ab9b 100644
--- a/keyboards/telophase/config.h
+++ b/keyboards/telophase/config.h
@@ -72,12 +72,3 @@ along with this program. If not, see .
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-
-// UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c
index a153dd4bf1..44b7e4c9e9 100644
--- a/keyboards/telophase/matrix.c
+++ b/keyboards/telophase/matrix.c
@@ -18,10 +18,10 @@ along with this program. If not, see .
#include "quantum.h"
#include "matrix.h"
-#include "protocol/serial.h"
+#include "uart.h"
void matrix_init_custom(void) {
- serial_init();
+ uart_init(1000000);
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
@@ -29,7 +29,7 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[13] = {0};
@@ -39,13 +39,13 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while (!SERIAL_UART_RXD_PRESENT) {
+ while (!uart_available()) {
timeout++;
if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk
index c3a8aaf79f..41a6ee25f5 100644
--- a/keyboards/telophase/rules.mk
+++ b/keyboards/telophase/rules.mk
@@ -19,7 +19,8 @@ AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
# Disable unsupported hardware
RGBLIGHT_SUPPORTED = no
diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c
index 82528cc680..0801f078ef 100644
--- a/quantum/process_keycode/process_printer.c
+++ b/quantum/process_keycode/process_printer.c
@@ -16,13 +16,14 @@
#include "process_printer.h"
#include "action_util.h"
+#include "uart.h"
bool printing_enabled = false;
uint8_t character_shift = 0;
void enable_printing(void) {
printing_enabled = true;
- serial_init();
+ uart_init(19200);
}
void disable_printing(void) { printing_enabled = false; }
@@ -35,7 +36,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0
void print_char(char c) {
USB_Disable();
- serial_send(c);
+ uart_write(c);
USB_Init();
}
diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h
index 3c6d06ff94..6f4d09f333 100644
--- a/quantum/process_keycode/process_printer.h
+++ b/quantum/process_keycode/process_printer.h
@@ -18,6 +18,4 @@
#include "quantum.h"
-#include "protocol/serial.h"
-
bool process_printer(uint16_t keycode, keyrecord_t *record);