1
0
Fork 0

Refactor qmk_install.sh (#10681)

This commit is contained in:
Ryan 2020-11-27 01:37:54 +11:00 committed by GitHub
parent 3afe0ea9b9
commit c21d5a0973
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
19 changed files with 360 additions and 369 deletions

View file

@ -60,9 +60,12 @@ After Homebrew is installed run this command:
You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them: You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them:
* Debian / Ubuntu / Devuan: `sudo apt install git python3 python3-pip` * Debian / Ubuntu / Devuan: `sudo apt install -y git python3-pip`
* Fedora / Red Hat / CentOS: `sudo yum install git python3 python3-pip` * Fedora / Red Hat / CentOS: `sudo yum -y install git python3-pip`
* Arch / Manjaro: `sudo pacman -S git python python-pip python-setuptools libffi` * Arch / Manjaro: `sudo pacman --needed --noconfirm -S git python-pip libffi`
* Void: `sudo xbps-install -y git python3-pip`
* Solus: `sudo eopkg -y install git python3`
* Sabayon: `sudo equo install dev-vcs/git dev-python/pip`
Install the global CLI to bootstrap your system: Install the global CLI to bootstrap your system:

View file

@ -1,39 +0,0 @@
#!/bin/sh
packages=$(cat <<EOF
git \
wget \
gmake \
gcc \
zip \
unzip \
avr-binutils \
avr-gcc \
avr-libc \
dfu-programmer \
dfu-util \
avrdude \
arm-none-eabi-gcc \
arm-none-eabi-binutils \
arm-none-eabi-newlib \
diffutils \
python3
EOF
)
util_dir=$(dirname "$0")
if [ $(id -u) = 0 ]; then
pkg update
pkg install -y ${packages}
echo ""
echo "Re-run the setup as your normal user to install the qmk python dependencies"
exit 1
else
if command -v sudo > /dev/null 2>&1; then
sudo pkg update
sudo pkg install -y ${packages}
else
echo "Make sure you run setup as root first to install base OS dependencies..."
echo ""
fi
python3 -m pip install --user -r ${util_dir}/../requirements.txt
fi

16
util/install/arch.sh Executable file
View file

@ -0,0 +1,16 @@
#!/bin/bash
_qmk_install() {
echo "Installing dependencies"
sudo pacman --needed --noconfirm -S \
base-devel clang diffutils gcc git unzip wget zip \
python-pip \
avr-binutils \
arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \
avrdude dfu-programmer dfu-util
sudo pacman --needed --noconfirm -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
sudo pacman --needed --noconfirm -S avr-libc # Must be installed after the above, or it will bring in the latest avr-gcc instead
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

22
util/install/debian.sh Executable file
View file

@ -0,0 +1,22 @@
#!/bin/bash
DEBIAN_FRONTEND=noninteractive
DEBCONF_NONINTERACTIVE_SEEN=true
export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
_qmk_install_prepare() {
sudo apt-get update
}
_qmk_install() {
echo "Installing dependencies"
sudo apt-get -yq install \
build-essential clang-format diffutils gcc git unzip wget zip \
python3-pip \
binutils-avr gcc-avr avr-libc \
binutils-arm-none-eabi gcc-arm-none-eabi libnewlib-arm-none-eabi \
avrdude dfu-programmer dfu-util teensy-loader-cli
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

15
util/install/fedora.sh Executable file
View file

@ -0,0 +1,15 @@
#!/bin/bash
_qmk_install() {
echo "Installing dependencies"
# TODO: Check whether devel/headers packages are really needed
sudo dnf -y install \
clang diffutils git gcc glibc-headers kernel-devel kernel-headers make unzip wget zip \
python3 \
avr-binutils avr-gcc avr-libc \
arm-none-eabi-binutils-cs arm-none-eabi-gcc-cs arm-none-eabi-newlib \
avrdude dfu-programmer dfu-util
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

18
util/install/freebsd.sh Executable file
View file

@ -0,0 +1,18 @@
#!/bin/bash
_qmk_install_prepare() {
sudo pkg update
}
_qmk_install() {
echo "Installing dependencies"
sudo pkg install -y \
git wget gmake gcc zip unzip diffutils \
python3 \
avr-binutils avr-gcc avr-libc \
arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \
avrdude dfu-programmer dfu-util
sudo python3 -m pip install -r $QMK_FIRMWARE_DIR/requirements.txt
}

33
util/install/gentoo.sh Executable file
View file

@ -0,0 +1,33 @@
#!/bin/bash
_qmk_install_prepare() {
echo "This script will make a USE change in order to ensure that that QMK works on your system."
echo "All changes will be sent to the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system."
echo "You will also need to ensure that your kernel is compiled with support for the microcontroller that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
read -p "Proceed? [y/N] " res
case $res in
[Yy]*)
return 0;;
*)
return 1;;
esac
}
_qmk_install() {
echo "Installing dependencies"
sudo touch /etc/portage/package.use/qmkfirmware
# tee is used here since sudo doesn't apply to >>
echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
sudo emerge -auN sys-devel/gcc
sudo emerge -au --noreplace \
app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang sys-devel/crossdev \
\>=dev-lang/python-3.6 \
dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

13
util/install/linux_shared.sh Executable file
View file

@ -0,0 +1,13 @@
#!/bin/bash
# For those distros that do not package bootloadHID
_qmk_install_bootloadhid() {
if ! command -v bootloadHID > /dev/null; then
wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
pushd /tmp/bootloadHID.2012-12-08/commandline/ > /dev/null
if make; then
sudo cp bootloadHID /usr/local/bin
fi
popd > /dev/null
fi
}

26
util/install/macos.sh Executable file
View file

@ -0,0 +1,26 @@
#!/bin/bash
_qmk_install_prepare() {
echo "Checking Homebrew installation"
if ! brew --version >/dev/null 2>&1; then
echo "Error! Homebrew is broken or not installed."
echo "Please run \`brew doctor\` or follow the installation instructions at https://brew.sh/, then re-run this script."
return 1
fi
brew update && brew upgrade
}
_qmk_install() {
echo "Installing dependencies"
# All macOS dependencies are managed in the Homebrew package:
# https://github.com/qmk/homebrew-qmk
brew install qmk/qmk/qmk
brew link --force avr-gcc@8
brew link --force arm-gcc-bin@8
python3 -m pip install -r $QMK_FIRMWARE_DIR/requirements.txt
}

36
util/install/msys2.sh Executable file
View file

@ -0,0 +1,36 @@
#!/bin/bash
_qmk_install_prepare() {
pacman -Syu
}
_qmk_install() {
echo "Installing dependencies"
pacman --needed --noconfirm --disable-download-timeout -S pactoys-git
pacboy sync --needed --noconfirm --disable-download-timeout \
base-devel: toolchain:x clang:x git: unzip: \
python3-pip:x \
avr-binutils:x avr-gcc:x avr-libc:x \
arm-none-eabi-binutils:x arm-none-eabi-gcc:x arm-none-eabi-newlib:x \
avrdude:x bootloadhid:x dfu-programmer:x dfu-util:x teensy-loader-cli:x
_qmk_install_drivers
python3 -m pip install -r "$QMK_FIRMWARE_DIR/requirements.txt"
}
_qmk_install_drivers() {
echo "Installing drivers"
tmpdir=$(mktemp -d)
cp "$QMK_FIRMWARE_UTIL_DIR/drivers.txt" $tmpdir
pushd $tmpdir > /dev/null
wget "https://github.com/qmk/qmk_driver_installer/releases/download/v1.01/qmk_driver_installer.exe"
cmd.exe //c "qmk_driver_installer.exe --all --force drivers.txt"
popd > /dev/null
rm -r $tmpdir
}

31
util/install/opensuse.sh Executable file
View file

@ -0,0 +1,31 @@
#!/bin/bash
_qmk_install_prepare() {
case $(grep ID /etc/os-release) in
*15.1*)
REPO_RELEASE=Leap_15.1;;
*15.2*)
REPO_RELEASE=Leap_15.2;;
*)
#REPO_RELEASE=Tumbleweed;;
echo "ERROR: Tumbleweed is currently not supported."
exit 1
esac
sudo zypper addrepo https://download.opensuse.org/repositories/devel:gcc/openSUSE_$REPO_RELEASE/devel:gcc.repo
sudo zypper addrepo https://download.opensuse.org/repositories/hardware/openSUSE_$REPO_RELEASE/hardware.repo
sudo zypper --gpg-auto-import-keys refresh
}
_qmk_install() {
echo "Installing dependencies"
sudo zypper install -y \
make clang gcc unzip wget zip \
python3-pip \
cross-avr-binutils cross-avr-gcc8 avr-libc \
cross-arm-binutils cross-arm-none-gcc8 cross-arm-none-newlib-devel \
avrdude dfu-programmer dfu-util
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

15
util/install/sabayon.sh Executable file
View file

@ -0,0 +1,15 @@
#!/bin/bash
_qmk_install() {
echo "Installing dependencies"
sudo equo install \
app-arch/unzip app-arch/zip net-misc/wget dev-vcs/git sys-devel/clang sys-devel/gcc sys-devel/crossdev \
dev-python/pip \
dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

25
util/install/slackware.sh Executable file
View file

@ -0,0 +1,25 @@
#!/bin/bash
_qmk_install_prepare() {
echo "Before you continue, please ensure that your user is added to sudoers and that sboinstall is configured."
read -p "Proceed? [y/N] " res
case $res in
[Yy]*)
;;
*)
return 1;;
esac
}
_qmk_install() {
echo "Installing dependencies"
sudo sboinstall \
avr-binutils avr-gcc avr-libc \
arm-binutils arm-gcc newlib \
python3 \
avrdude dfu-programmer dfu-util teensy_loader_cli
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

19
util/install/solus.sh Executable file
View file

@ -0,0 +1,19 @@
#!/bin/bash
_qmk_install_prepare() {
sudo eopkg -y update-repo
sudo eopkg -y upgrade
}
_qmk_install() {
echo "Installing dependencies"
sudo eopkg -y install \
-c system.devel git wget zip unzip \
python3 \
avr-binutils avr-gcc avr-libc \
arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \
avrdude dfu-programmer dfu-util
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

15
util/install/void.sh Executable file
View file

@ -0,0 +1,15 @@
#!/bin/bash
_qmk_install() {
echo "Installing dependencies"
sudo xbps-install \
gcc git make wget unzip zip \
python3-pip \
avr-binutils avr-gcc avr-libc \
cross-arm-none-eabi-binutils cross-arm-none-eabi-gcc cross-arm-none-eabi-newlib \
avrdude dfu-programmer dfu-util teensy_loader_cli \
libusb-compat-devel
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
}

View file

@ -1,251 +0,0 @@
#!/bin/sh
# Note: This file uses tabs to indent. Please don't mix tabs and spaces.
GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
SOLUS_INFO="Your tools are now installed. To start using them, open new terminal or source these scripts:\n\t/usr/share/defaults/etc/profile.d/50-arm-toolchain-path.sh\n\t/usr/share/defaults/etc/profile.d/50-avr-toolchain-path.sh"
util_dir=$(dirname "$0")
# For those distros that do not package bootloadHID
install_bootloadhid() {
if ! command -v bootloadHID >/dev/null; then
wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
cd /tmp/bootloadHID.2012-12-08/commandline/
if make; then
sudo cp bootloadHID /usr/local/bin
fi
cd -
fi
}
if grep ID /etc/os-release | grep -qE "fedora"; then
sudo dnf install \
arm-none-eabi-binutils-cs \
arm-none-eabi-gcc-cs \
arm-none-eabi-newlib \
avr-binutils \
avr-gcc \
avr-libc \
binutils-avr32-linux-gnu \
clang \
avrdude \
dfu-util \
dfu-programmer \
diffutils \
git \
gcc \
glibc-headers \
kernel-devel \
kernel-headers \
libusb-devel \
make \
perl \
python3 \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
DEBIAN_FRONTEND=noninteractive
DEBCONF_NONINTERACTIVE_SEEN=true
export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
sudo apt-get update
sudo apt-get -yq install \
build-essential \
avr-libc \
binutils-arm-none-eabi \
binutils-avr \
clang-format \
dfu-programmer \
dfu-util \
diffutils \
gcc \
gcc-arm-none-eabi \
gcc-avr \
git \
libnewlib-arm-none-eabi \
avrdude \
libusb-dev \
python3 \
python3-pip \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
sudo pacman --needed -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
sudo pacman -S --needed \
arm-none-eabi-binutils \
arm-none-eabi-gcc \
arm-none-eabi-newlib \
avrdude \
avr-binutils \
avr-libc \
base-devel \
clang \
dfu-programmer \
dfu-util \
diffutils \
gcc \
git \
libusb-compat \
python \
python-pip \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q gentoo; then
echo "$GENTOO_WARNING" | fmt
printf "\nProceed (y/N)? "
read -r answer
if echo "$answer" | grep -iq "^y"; then
sudo touch /etc/portage/package.use/qmkfirmware
# tee is used here since sudo doesn't apply to >>
echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
sudo emerge -auN sys-devel/gcc
sudo emerge -au --noreplace \
app-arch/unzip \
app-arch/zip \
app-mobilephone/dfu-util \
dev-embedded/dfu-programmer \
dev-embedded/avrdude \
net-misc/wget \
sys-devel/clang \
sys-devel/crossdev
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
echo "Done!"
else
echo "Quitting..."
fi
elif grep ID /etc/os-release | grep -q sabayon; then
sudo equo install \
app-arch/unzip \
app-arch/zip \
app-mobilephone/dfu-util \
dev-embedded/dfu-programmer \
dev-embedded/avrdude \
dev-lang/python \
net-misc/wget \
sys-devel/clang \
sys-devel/gcc \
sys-devel/crossdev
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
echo "Done!"
elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
CROSS_AVR_GCC=cross-avr-gcc8
CROSS_ARM_GCC=cross-arm-none-gcc8
if grep ID /etc/os-release | grep -q "15."; then
CROSS_AVR_GCC=cross-avr-gcc7
CROSS_ARM_GCC=cross-arm-none-gcc7
fi
sudo zypper install \
avr-libc \
clang \
$CROSS_AVR_GCC \
$CROSS_ARM_GCC \
cross-avr-binutils \
cross-arm-none-newlib-devel \
cross-arm-binutils cross-arm-none-newlib-devel \
avrdude \
dfu-util \
dfu-programmer \
gcc \
libusb-devel \
python3 \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q slackware; then
printf "$SLACKWARE_WARNING\n"
printf "\nProceed (y/N)? "
read -r answer
if echo "$answer" | grep -iq "^y" ;then
sudo sboinstall \
avr-binutils \
avr-gcc \
avr-libc \
avrdude \
dfu-programmer \
dfu-util \
arm-binutils \
arm-gcc \
newlib \
python3
echo "Done!"
else
echo "Quitting..."
fi
elif grep ID /etc/os-release | grep -q solus; then
sudo eopkg ur
sudo eopkg it \
-c system.devel \
arm-none-eabi-gcc \
arm-none-eabi-binutils \
arm-none-eabi-newlib \
avr-libc \
avr-binutils \
avr-gcc \
avrdude \
dfu-util \
dfu-programmer \
libusb-devel \
python3 \
git \
wget \
zip \
unzip
printf "\n$SOLUS_INFO\n"
elif grep ID /etc/os-release | grep -q void; then
sudo xbps-install \
avr-binutils \
avr-gcc \
avr-libc \
cross-arm-none-eabi-binutils \
cross-arm-none-eabi-gcc \
cross-arm-none-eabi-newlib \
avrdude \
dfu-programmer \
dfu-util \
gcc \
git \
libusb-compat-devel \
make \
wget \
unzip \
zip
else
echo "Sorry, we don't recognize your OS. Help us by contributing support!"
echo
echo "https://docs.qmk.fm/#/contributing"
fi
# Global install tasks
install_bootloadhid
pip3 install --user -r ${util_dir}/../requirements.txt
if uname -a | grep -qi microsoft; then
echo "********************************************************************************"
echo "* Detected Windows Subsystem for Linux. *"
echo "* Currently, WSL has no access to USB devices and so flashing from within the *"
echo "* WSL terminal will not work. *"
echo "* *"
echo "* Please install the QMK Toolbox instead: *"
echo "* https://github.com/qmk/qmk_toolbox/releases *"
echo "* Then, map your WSL filesystem as a network drive: *"
echo "* \\\\\\\\wsl$\\<distro> *"
echo "********************************************************************************"
echo
fi

View file

@ -1,31 +0,0 @@
#!/bin/bash
util_dir=$(dirname "$0")
if ! brew --version >/dev/null 2>&1; then
echo "Error! Homebrew not installed or broken!"
echo -n "Would you like to install homebrew now? [y/n] "
while read -r ANSWER; do
case $ANSWER in
y | Y)
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
break
;;
n | N)
exit 1
;;
*)
echo -n "Would you like to install homebrew now? [y/n] "
;;
esac
done
fi
# All macOS dependencies are managed in the homebrew package:
# https://github.com/qmk/homebrew-qmk
brew update
brew install qmk/qmk/qmk
brew link --force avr-gcc@8
brew link --force arm-gcc-bin@8
pip3 install -r "${util_dir}/../requirements.txt"

View file

@ -1,22 +0,0 @@
#!/bin/bash
util_dir=$(dirname "$0")
echo "Installing dependencies needed for the installation"
pacman --needed --noconfirm --disable-download-timeout -Sy \
base-devel mingw-w64-x86_64-toolchain mingw-w64-x86_64-clang git unzip \
mingw-w64-x86_64-python-pip \
mingw-w64-x86_64-avr-binutils mingw-w64-x86_64-avr-gcc mingw-w64-x86_64-avr-libc \
mingw-w64-x86_64-arm-none-eabi-binutils mingw-w64-x86_64-arm-none-eabi-gcc mingw-w64-x86_64-arm-none-eabi-newlib \
mingw-w64-x86_64-avrdude mingw-w64-x86_64-bootloadhid mingw-w64-x86_64-dfu-programmer mingw-w64-x86_64-dfu-util mingw-w64-x86_64-teensy-loader-cli
echo "Installing drivers"
tmpdir=$(mktemp -d)
cp "${util_dir}/drivers.txt" $tmpdir
pushd $tmpdir > /dev/null
wget "https://github.com/qmk/qmk_driver_installer/releases/download/v1.01/qmk_driver_installer.exe"
cmd.exe //c "qmk_driver_installer.exe --all --force drivers.txt"
popd > /dev/null
rm -r $tmpdir
pip3 install -r "${util_dir}/../requirements.txt"

View file

@ -1,27 +1,74 @@
#!/bin/sh #!/bin/bash
# Pick the correct install script based on the current OS
util_dir=$(dirname "$0") QMK_FIRMWARE_DIR=$(cd -P -- "$(dirname -- "$0")/.." && pwd -P)
QMK_FIRMWARE_UTIL_DIR=$QMK_FIRMWARE_DIR/util
case $(uname -a) in case $(uname -a) in
*Darwin*) *Darwin*)
exec "${util_dir}/macos_install.sh" . "$QMK_FIRMWARE_UTIL_DIR/install/macos.sh";;
;;
*FreeBSD*) *FreeBSD*)
exec "${util_dir}/freebsd_install.sh" . "$QMK_FIRMWARE_UTIL_DIR/install/freebsd.sh";;
;; *MINGW64_NT*)
. "$QMK_FIRMWARE_UTIL_DIR/install/msys2.sh";;
*MSYS_NT*|*MINGW32_NT*)
echo "Please open a MinGW64 terminal window and re-run this script."
exit 1;;
*Linux*) *Linux*)
exec "${util_dir}/linux_install.sh" . "$QMK_FIRMWARE_UTIL_DIR/install/linux_shared.sh"
;;
MINGW64_NT*) case $(grep ID /etc/os-release) in
exec "${util_dir}/msys2_install.sh" *arch*|*manjaro*)
;; . "$QMK_FIRMWARE_UTIL_DIR/install/arch.sh";;
MSYS_NT*|MINGW32_NT*) *debian*|*ubuntu*)
echo "Please open a MinGW 64-bit terminal window and re-run this script." . "$QMK_FIRMWARE_UTIL_DIR/install/debian.sh";;
exit 1 *fedora*)
. "$QMK_FIRMWARE_UTIL_DIR/install/fedora.sh";;
*gentoo*)
. "$QMK_FIRMWARE_UTIL_DIR/install/gentoo.sh";;
*opensuse*|*tumbleweed*)
. "$QMK_FIRMWARE_UTIL_DIR/install/opensuse.sh";;
*sabayon*)
. "$QMK_FIRMWARE_UTIL_DIR/install/sabayon.sh";;
*slackware*)
. "$QMK_FIRMWARE_UTIL_DIR/install/slackware.sh";;
*solus*)
. "$QMK_FIRMWARE_UTIL_DIR/install/solus.sh";;
*void*)
. "$QMK_FIRMWARE_UTIL_DIR/install/void.sh";;
*)
echo "Sorry, we don't recognize your distribution. Help us by contributing support!"
echo
echo "https://docs.qmk.fm/#/contributing"
exit 1;;
esac
if uname -a | grep -qi microsoft; then
echo "********************************************************************************"
echo "* Detected Windows Subsystem for Linux. *"
echo "* Currently, WSL has no access to USB devices and so flashing from within the *"
echo "* WSL terminal will not work. *"
echo "* *"
echo "* Please install the QMK Toolbox instead: *"
echo "* https://github.com/qmk/qmk_toolbox/releases *"
echo "* Then, map your WSL filesystem as a network drive: *"
echo "* \\\\\\\\wsl$\\<distro> *"
echo "********************************************************************************"
echo
fi
;; ;;
*) *)
echo "Environment not supported. Please see https://docs.qmk.fm for details on how to configure the QMK Firmware build tools manually." echo "Sorry, we don't recognize your environment. Help us by contributing support!"
exit 1 echo
;; echo "https://docs.qmk.fm/#/contributing"
exit 1;;
esac esac
if type _qmk_install_prepare &>/dev/null; then
_qmk_install_prepare || exit 1
fi
_qmk_install
if type _qmk_install_bootloadhid &>/dev/null; then
_qmk_install_bootloadhid
fi