1
0
Fork 0

Merge remote-tracking branch 'upstream/master' into develop

This commit is contained in:
fauxpark 2021-09-20 16:58:29 +10:00
commit c38a730805
311 changed files with 4894 additions and 585 deletions

View file

@ -148,8 +148,8 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw
* GPIO pin initialisation: `void matrix_init_pins(void)` * GPIO pin initialisation: `void matrix_init_pins(void)`
* This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override. * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override.
* `COL2ROW`-based row reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)` * `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
* `ROW2COL`-based column reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` * `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
* `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
* These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override. * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override.

View file

@ -244,14 +244,7 @@ static bool my_cool_effect2(effect_params_t* params) {
#endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS #endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
``` ```
For inspiration and examples, check out the built-in effects under `quantum/led_matrix_animations/` For inspiration and examples, check out the built-in effects under `quantum/led_matrix/animations/`.
## Additional `config.h` Options :id=additional-configh-options ## Additional `config.h` Options :id=additional-configh-options

View file

@ -562,7 +562,7 @@ static bool my_cool_effect2(effect_params_t* params) {
#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS
``` ```
For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animations/` For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix/animations/`.
## Colors :id=colors ## Colors :id=colors

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output AUDIO_ENABLE = no # Audio output

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
RGB_MATRIX_ENABLE = yes RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812 RGB_MATRIX_DRIVER = WS2812

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -17,7 +17,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu
# change yes to no to disable # change yes to no to disable
# #
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration COMMAND_ENABLE = no # Commands for debug and configuration

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -5,22 +5,14 @@ BOARD = QMK_PROTON_C
# Bootloader selection # Bootloader selection
BOOTLOADER = stm32-dfu BOOTLOADER = stm32-dfu
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes # Console for debug(+400) CONSOLE_ENABLE = yes
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE NKRO_ENABLE = yes
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend AUDIO_ENABLE = yes
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = yes
NKRO_ENABLE = yes # USB Nkey Rollover HAPTIC_ENABLE = SOLENOID
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI controls
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = yes # Audio output on port C6
RGBLIGHT_ENABLE = yes # RGB Enable / Disable
RGBLIGHT_STARTUP_ANIMATION = yes RGBLIGHT_STARTUP_ANIMATION = yes
HAPTIC_ENABLE = SOLENOID

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
RGBLIGHT_ENABLE = no # RGB Enable / Disable RGBLIGHT_ENABLE = no # RGB Enable / Disable

View file

@ -17,7 +17,7 @@ TERMINAL_ENABLE = yes
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI support MIDI_ENABLE = no # MIDI support
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output AUDIO_ENABLE = no # Audio output

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = yes # MIDI support MIDI_ENABLE = yes # MIDI support
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = yes # Audio output on port C6 AUDIO_ENABLE = yes # Audio output on port C6

View file

@ -3,32 +3,32 @@
"url": "https://ckeys.org/slides/exboard", "url": "https://ckeys.org/slides/exboard",
"maintainer": "brandenbyers", "maintainer": "brandenbyers",
"layouts": { "layouts": {
"LAYOUT_ortho_4x5": { "LAYOUT": {
"layout": [ "layout": [
{"label":"k00", "x":1, "y":0}, {"label":"k00", "x":1, "y":0},
{"label":"k01", "x":2, "y":0}, {"label":"k01", "x":2, "y":0},
{"label":"k02", "x":3, "y":0}, {"label":"k02", "x":3, "y":0},
{"label":"k03", "x":4, "y":0}, {"label":"k03", "x":4, "y":0},
{"label":"k04", "x":5, "y":0}, {"label":"k04", "x":5, "y":0},
{"label":"k10", "x":1, "y":1},
{"label":"k11", "x":2, "y":1},
{"label":"k12", "x":3, "y":1},
{"label":"k13", "x":4, "y":1},
{"label":"k14", "x":5, "y":1},
{"label":"k20", "x":1, "y":2},
{"label":"k21", "x":2, "y":2},
{"label":"k22", "x":3, "y":2},
{"label":"k23", "x":4, "y":2},
{"label":"k24", "x":5, "y":2},
{"label":"k05 (Rotary Push)", "x":0, "y":3}, {"label":"k05 (Rotary Push)", "x":0, "y":3},
{"label":"k30", "x":1, "y":3},
{"label":"k06", "x":1, "y":1}, {"label":"k31", "x":2, "y":3},
{"label":"k07", "x":2, "y":1}, {"label":"k32", "x":3, "y":3},
{"label":"k08", "x":3, "y":1}, {"label":"k33", "x":4, "y":3},
{"label":"k09", "x":4, "y":1}, {"label":"k34", "x":5, "y":3}
{"label":"k10", "x":5, "y":1},
{"label":"k11", "x":1, "y":2},
{"label":"k12", "x":2, "y":2},
{"label":"k13", "x":3, "y":2},
{"label":"k14", "x":4, "y":2},
{"label":"k15", "x":5, "y":2},
{"label":"k16", "x":1, "y":3},
{"label":"k17", "x":2, "y":3},
{"label":"k18", "x":3, "y":3},
{"label":"k19", "x":4, "y":3},
{"label":"k20", "x":5, "y":3}
] ]
} }
} }

View file

@ -1,3 +0,0 @@
#pragma once
// Add overrides here

View file

@ -1,3 +1,19 @@
/* Copyright 2019 Branden Byers (@brandenbyers)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H #include QMK_KEYBOARD_H
enum layers { enum layers {
@ -13,13 +29,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ // ┌─────────┬─────────┬─────────┬─────────┬─────────┐
// │ │ │ │ │ │ // │ │ │ │ │ │
// │ 7 │ 8 │ 9 │ / │ ADMIN │ // │ 7 │ 8 │ 9 │ / │ ADMIN │
// ROTORY │ │ │ │ │ │ // ROTARY │ │ │ │ │ │
// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// VOL UP │ │ │ │ │ │ // PAGE DOWN│ │ │ │ │ │
// │ 4 │ 5 │ 6 │ * │ MOUSE │ // │ 4 │ 5 │ 6 │ * │ MOUSE │
// ROTORY │ │ │ │ │ │ // ROTARY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// VOL DOWN │ │ │ │ │ │ // PAGE UP │ │ │ │ │ │
// │ 1 │ 2 │ 3 │ - │ MIDI │ // │ 1 │ 2 │ 3 │ - │ MIDI │
// │ │ │ │ │ │ // │ │ │ │ │ │
// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
@ -29,23 +45,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
[_BASE] = LAYOUT( [_BASE] = LAYOUT(
KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS, MO(_ADMIN), MU_TOG, KC_P7, KC_P8 , KC_P9 , KC_PSLS, MO(_ADMIN),
KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, TG(_MOUSE), KC_P4, KC_P5 , KC_P6 , KC_PAST, TG(_MOUSE),
KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, TG(_MIDI), KC_P1, KC_P2 , KC_P3 , KC_PMNS, TG(_MIDI),
KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS, MO(_MUSIC) MU_TOG, KC_P0, KC_PDOT, KC_PEQL, KC_PPLS, MO(_MUSIC)
), ),
// MUSIC LAYER // MUSIC LAYER
// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ // ┌─────────┬─────────┬─────────┬─────────┬─────────┐
// │ │ │ │ │ │ // │ │ │ │ │ │
// │ │ │ │ │ │ // │ │ │ │ │ │
// ROTORY │ │ │ │ │ │ // ROTARY │ │ │ │ │ │
// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ │ │ │ │ │
// ROTORY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE DOWN│ │ │ │ │ │ // PAGE DOWN│ │ │ │ │ │
// │ │ │ │ │ │
// ROTARY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ │ │ │ MODE │ │ // │ │ │ │ MODE │ │
// │ │ │ │ │ │ // │ │ │ │ │ │
// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
@ -55,23 +71,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
[_MUSIC] = LAYOUT( [_MUSIC] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, MU_MOD, _______, _______, _______, _______, MU_MOD,
KC_LCTL, KC_LALT, _______, KC_LGUI, _______ _______, KC_LCTL, KC_LALT, _______, KC_LGUI, _______
), ),
// MIDI LAYER // MIDI LAYER
// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ // ┌─────────┬─────────┬─────────┬─────────┬─────────┐
// │ │ │ │ │ │ // │ │ │ │ │ │
// │ D♯ │ E │ F │ F♯ │ G │ // │ D♯ │ E │ F │ F♯ │ G │
// ROTORY │ │ │ │ │ │ // ROTARY │ │ │ │ │ │
// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ A♯ │ B │ C │ C♯ │ D │
// ROTORY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE DOWN│ │ │ │ │ │ // PAGE DOWN│ │ │ │ │ │
// │ A♯ │ B │ C │ C♯ │ D │
// ROTARY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ F │ F♯ │ G │ G♯ │ A │ // │ F │ F♯ │ G │ G♯ │ A │
// │ │ │ │ │ │ // │ │ │ │ │ │
// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
@ -81,21 +97,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
[_MIDI] = LAYOUT( [_MIDI] = LAYOUT(
MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, _______, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3,
MI_As_2, MI_B_2, MI_C_3, MI_Cs_3, MI_D_3, MI_As_2, MI_B_2, MI_C_3, MI_Cs_3, MI_D_3,
MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI), MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI),
MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2 _______, MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2
), ),
// MOUSE LAYER // MOUSE LAYER
// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ // ┌─────────┬─────────┬─────────┬─────────┬─────────┐
// │ │ │ │ │ │ // │ │ │ │ │ │
// │ BTN 5 │ │ WHEEL │ │ │ // │ BTN 5 │ │ WHEEL │ │ │
// ROTORY │ │ │ UP │ │ │ // ROTARY │ │ │ UP │ │ │
// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE DOWN│ │ │ │ │ │ // PAGE DOWN│ │ │ │ │ │
// │ │ LEFT │ MOUSE │ RIGHT │ │ // │ │ LEFT │ MOUSE │ RIGHT │ │
// ROTORY │ │ CLICK │ UP │ CLICK │ │ // ROTARY │ │ CLICK │ UP │ CLICK │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │ // PAGE UP │ │ │ │ │ │
// │ BTN 4 │ MOUSE │ MOUSE │ MOUSE │ │ // │ BTN 4 │ MOUSE │ MOUSE │ MOUSE │ │
@ -107,23 +123,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
[_MOUSE] = LAYOUT( [_MOUSE] = LAYOUT(
KC_MS_BTN5, _______, KC_MS_WH_UP, _______, _______, _______, KC_BTN5, _______, KC_WH_U, _______, _______,
_______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, TG(_MOUSE), _______, KC_BTN1, KC_MS_U, KC_BTN2, TG(_MOUSE),
KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, _______,
KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______ _______, KC_BTN3, KC_WH_L, KC_WH_D, KC_WH_R, _______
), ),
// ADMIN LAYER // ADMIN LAYER
// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ // ┌─────────┬─────────┬─────────┬─────────┬─────────┐
// │ │ │ │ │ │ // │ │ │ │ │ │
// │ RESET │ │ │ │ │ // │ RESET │ │ │ │ │
// ROTORY │ │ │ │ │ │ // ROTARY │ │ │ │ │ │
// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ 4 │ 5 │ 6 │ * │ │
// ROTORY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE DOWN│ │ │ │ │ │ // PAGE DOWN│ │ │ │ │ │
// │ 4 │ 5 │ 6 │ * │ │
// ROTARY │ │ │ │ │ │
// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤
// PAGE UP │ │ │ │ │ │
// │ 1 │ 2 │ 3 │ │ │ // │ 1 │ 2 │ 3 │ │ │
// │ │ │ │ │ │ // │ │ │ │ │ │
// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
@ -133,10 +149,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
[_ADMIN] = LAYOUT( [_ADMIN] = LAYOUT(
RESET, _______, _______, _______, TG(_ADMIN), _______, RESET, _______, _______, _______, TG(_ADMIN),
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______ _______, _______, _______, _______, _______, _______
), ),
}; };

View file

@ -1 +0,0 @@
# The default keymap for the cKeys Handwire 101 4x4 keyboard.

View file

@ -4,9 +4,9 @@
A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next? A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next?
Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers) * Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers)
Hardware Supported: theDora * Hardware Supported: theDora
Hardware Availability: [cKeys.org](https://ckeys.org) * Hardware Availability: [cKeys.org](https://ckeys.org)
Make example for this keyboard (after setting up your build environment): Make example for this keyboard (after setting up your build environment):

View file

@ -6,17 +6,20 @@ BOARD = QMK_PROTON_C
BOOTLOADER = stm32-dfu BOOTLOADER = stm32-dfu
# Build Options # Build Options
# comment out to disable the options. # change yes to no to disable
# #
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration COMMAND_ENABLE = no # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
AUDIO_ENABLE = yes BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = yes # Audio output
MIDI_ENABLE = yes # MIDI support MIDI_ENABLE = yes # MIDI support
RGBLIGHT_ENABLE = no
ENCODER_ENABLE = yes ENCODER_ENABLE = yes

View file

@ -1 +1,31 @@
/* Copyright 2019 Branden Byers (@brandenbyers)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "thedora.h" #include "thedora.h"
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) {
return false;
}
if (index == 0) {
if (clockwise) {
tap_code(KC_PGDN);
} else {
tap_code(KC_PGUP);
}
}
return true;
}

View file

@ -1,21 +1,37 @@
/* Copyright 2019 Branden Byers (@brandenbyers)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once #pragma once
#include "quantum.h" #include "quantum.h"
#define XXX KC_NO
// This a shortcut to help you visually see your layout. // This a shortcut to help you visually see your layout.
// The following is an example using the Planck MIT layout // The first section contains all of the arguments
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array // The second converts the arguments into a two-dimensional array
#define LAYOUT( \ #define LAYOUT( \
k00, k01, k02, k03, k04, k05, \ k00, k01, k02, k03, k04, \
k06, k07, k08, k09, k10, \ k10, k11, k12, k13, k14, \
k11, k12, k13, k14, k15, \ k20, k21, k22, k23, k24, \
k16, k17, k18, k19, k20 \ k05, k30, k31, k32, k33, k34 \
) \ ) \
{ \ { \
{ k00, k01, k02, k03, k04, k05, }, \ { k00, k01, k02, k03, k04, k05 }, \
{ k06, k07, k08, k09, k10 }, \ { k10, k11, k12, k13, k14, XXX }, \
{ k11, k12, k13, k14, k15 }, \ { k20, k21, k22, k23, k24, XXX }, \
{ k16, k17, k18, k19, k20 } \ { k30, k31, k32, k33, k34, XXX } \
} }

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -0,0 +1,232 @@
// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
// See gfxfont.h for newer custom bitmap font info.
#include "progmem.h"
// Standard ASCII 5x7 font
const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
0x18, 0x24, 0x24, 0x1C, 0x18, 0x00,
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xE0, 0xE0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0xFC, 0xFC,
0xFC, 0xFC, 0xFC, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80,
0xC0, 0xE0, 0x60, 0x60, 0xE0, 0xC0,
0x80, 0x00, 0x00, 0x80, 0xC0, 0xC0,
0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
0x80, 0xC0, 0xC0, 0xC0, 0x80, 0x00,
0x00, 0x00, 0xC0, 0x80, 0xC0, 0xC0,
0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xFF, 0xFF, 0x30, 0x18, 0x18, 0x38,
0xF0, 0xE0, 0x00, 0x00, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0xFE, 0xFE, 0x00, 0x00, 0xFF,
0xFF, 0x18, 0x30, 0x30, 0x38, 0x1F,
0x0F, 0x00, 0x8F, 0x1F, 0x38, 0x30,
0x70, 0xE3, 0xC7, 0x00, 0x00, 0xFF,
0xFF, 0x01, 0x00, 0x01, 0xFF, 0xFF,
0x00, 0x00, 0xFF, 0xFF, 0x01, 0x00,
0x01, 0xFF, 0xFF, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x03, 0x07, 0x0E, 0x0C, 0x0C, 0x0E,
0x07, 0x03, 0x00, 0x00, 0x0F, 0x0F,
0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00,
0x00, 0x0F, 0x0F, 0x00, 0x00, 0x3F,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x03, 0x07, 0x0C, 0x0C,
0x0E, 0x07, 0x03, 0x00, 0x00, 0x03,
0x07, 0x0E, 0x0C, 0x0E, 0x07, 0x03,
0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};

View file

@ -0,0 +1,51 @@
/*
This is the c configuration file for the keymap
Copyright 2015 Jack Humbert
Copyright 2020 Ben Lipson <ben.j.lipson@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
#ifdef RGBLIGHT_ENABLE
#undef RGBLED_NUM
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif
#define OLED_FONT_H "keyboards/crkbd/keymaps/blipson/blipsonfont.c"
#define SPLIT_LAYER_STATE_ENABLE

View file

@ -0,0 +1,139 @@
/*
Copyright 2019 @foostan
Copyright 2020 Ben Lipson <ben.j.lipson@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
MO(1), KC_LGUI, KC_SPC, KC_SPC, KC_RALT, MO(2)
//`--------------------------' `--------------------------'
),
[1] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_UP, KC_LPRN, KC_RPRN, KC_BSLS,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, KC_ENT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, KC_END, KC_HOME, KC_PGDN, KC_PGUP, KC_RSFT,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
_______, KC_LGUI, KC_SPC, KC_SPC, KC_RALT, MO(3)
//`--------------------------' `--------------------------'
),
[2] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, KC_ASTR, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_BSLS, KC_PIPE, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
MO(3), KC_LGUI, KC_SPC, KC_SPC, KC_RALT, _______
//`--------------------------' `--------------------------'
),
[3] = LAYOUT_split_3x6_3(
//,-------------------------------------------------------------------------------. ,------------------------------------------------------------------.
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
//|----------+------------+--------------+---------------+-----------+------------| |------------+------------+------------+--------+--------+---------|
KC_LCTL, A(KC_F12), A(G(KC_LEFT)), A(G(KC_RIGHT)), S(KC_F6), C(S(KC_D)), C(S(KC_R)), G(KC_LBRC), G(KC_RBRC), KC_F11, KC_F12, KC_MPLY,
//|----------+------------+--------------+---------------+-----------+------------| |------------+------------+------------+--------+--------+---------|
G(KC_F2), A(G(KC_F)), KC_MUTE, KC__VOLDOWN, KC__VOLUP, G(KC_GRV), C(G(KC_G)), KC_TAB, S(KC_TAB), KC_BRID, KC_BRIU, KC_CAPS,
//|----------+------------+--------------+---------------+-----------+------------+--------| |--------+------------+------------+------------+--------+--------+---------|
_______, KC_LGUI, KC_SPC, KC_SPC, KC_RALT, _______
//`----------------------------------' `-------------------------------'
)
};
#ifdef OLED_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_keyboard_left()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
}
#define L_BASE 0
#define L_LOWER 2
#define L_RAISE 4
#define L_ADJUST 8
void oled_render_layer_state(void) {
oled_write_P(PSTR("Layer: "), false);
switch (layer_state) {
case L_BASE:
oled_write_ln_P(PSTR("Default"), false);
break;
case L_LOWER:
oled_write_ln_P(PSTR("Lower"), false);
break;
case L_RAISE:
oled_write_ln_P(PSTR("Raise"), false);
break;
case L_ADJUST:
case L_ADJUST|L_LOWER:
case L_ADJUST|L_RAISE:
case L_ADJUST|L_LOWER|L_RAISE:
oled_write_ln_P(PSTR("Adjust"), false);
break;
}
oled_write_P(PSTR("I love Marce"), false);
}
void render_bootmagic_status(bool status) {
/* Show Ctrl-Gui Swap options */
static const char PROGMEM logo[][2][3] = {
{{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
};
if (status) {
oled_write_ln_P(logo[0][0], false);
oled_write_ln_P(logo[0][1], false);
} else {
oled_write_ln_P(logo[1][0], false);
oled_write_ln_P(logo[1][1], false);
}
}
void oled_render_logo(void) {
static const char PROGMEM crkbd_logo[] = {
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
0};
oled_write_P(crkbd_logo, false);
}
void oled_task_user(void) {
if (is_keyboard_master()) {
oled_render_layer_state();
} else {
oled_render_logo();
}
}
#endif // OLED_ENABLE

View file

@ -0,0 +1,10 @@
# bLipson
a keymap for the CRKBD/Corne geared towards professional software development on MacOS.
#### Meant for use with the following tools:
- [Intellij IDEA](https://www.jetbrains.com/idea/)
- [Rectangle](https://rectangleapp.com/)
## Building
`make crkbd:blipson`

View file

@ -0,0 +1,3 @@
OLED_ENABLE = yes
RGBLIGHT_ENABLE = no
AUDIO_ENABLE = no

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
RGBLIGHT_ENABLE = yes # RGB drivers RGBLIGHT_ENABLE = yes # RGB drivers

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -1,6 +1,4 @@
#pragma once #pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
#define LAYER_FN #define LAYER_FN
#define LAYER_NUMPAD #define LAYER_NUMPAD

View file

@ -1,5 +1,5 @@
# Generic features # Generic features
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite BOOTMAGIC_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
RGBLIGHT_ENABLE = no # Use RGB underglow light RGBLIGHT_ENABLE = no # Use RGB underglow light

View file

@ -1,13 +1,21 @@
BACKLIGHT_ENABLE = no USER_NAME := konstantin
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
# Generic features
BOOTMAGIC_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
NKRO_ENABLE = yes NKRO_ENABLE = yes
RGBLIGHT_ENABLE = no
SPACE_CADET_ENABLE = no
TAP_DANCE_ENABLE = yes TAP_DANCE_ENABLE = yes
UNICODEMAP_ENABLE = no UNICODEMAP_ENABLE = no
USER_NAME = konstantin # Keyboard-specific features
BACKLIGHT_ENABLE = no
RGBLIGHT_ENABLE = no
VIA_ENABLE = yes
# Firmware size reduction
GRAVE_ESC_ENABLE = no
MAGIC_ENABLE = no
SPACE_CADET_ENABLE = no

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -1,6 +1,4 @@
#pragma once #pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
#define LAYER_FN #define LAYER_FN
#define LAYER_NUMPAD #define LAYER_NUMPAD

View file

@ -1,5 +1,5 @@
# Generic features # Generic features
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite BOOTMAGIC_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
RGBLIGHT_ENABLE = yes # Use RGB underglow light RGBLIGHT_ENABLE = yes # Use RGB underglow light

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
WS2812_DRIVER = i2c WS2812_DRIVER = i2c
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
WS2812_DRIVER = i2c WS2812_DRIVER = i2c
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode

View file

@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

Some files were not shown because too many files have changed in this diff Show more