1
0
Fork 0
* jotix 4x12 keymap

* readme corrections

* jotix ortho 4x12 keymap

* jotix ortho 4x12 keymap

* jotix ortho 4x12 keymap

* jotix ortho 4x12 keymap

* jotix ortho 4x12 keymap

* jotix ortho 4x12 keymap

* add jotpad keyboard

* add jotpad keyboard

* backlight pin for arduino pro micro

* readme correction

* readme correction

* jotpad16

* Update keyboards/handwired/jotpad16/jotpad16.h

Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com>

* Update keyboards/handwired/jotpad16/keymaps/default/keymap.c

Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com>

* Update keyboards/handwired/jotpad16/readme.md

Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com>
This commit is contained in:
jotix 2019-02-22 13:08:25 -03:00 committed by MechMerlin
parent e3621c162c
commit c3cf9c0cef
6 changed files with 201 additions and 0 deletions

View file

@ -0,0 +1,38 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Jotix
#define PRODUCT JotPad16
#define DESCRIPTION A Jotantastic compact NumPad
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
/* pro_micro pin-out */
#define MATRIX_ROW_PINS { B6, B2, D2, D3 }
#define MATRIX_COL_PINS { B5, B4, B3, B1 }
#define UNUSED_PINS
/* leds */
#define QMK_LED E6
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_PIN D7
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 0
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View file

@ -0,0 +1,6 @@
#include "jotpad16.h"
void matrix_init_kb(void) {
matrix_init_user();
}

View file

@ -0,0 +1,18 @@
#pragma once
#include "quantum.h"
// Used to create a keymap using only KC_ prefixed keys
#define LAYOUT_ortho_4x4( \
k00, k01, k02, k03, \
k10, k11, k12, k13, \
k20, k21, k22, k23, \
k30, k31, k32, k33 \
) \
{ \
{ k00, k01, k02, k03 }, \
{ k10, k11, k12, k13 }, \
{ k20, k21, k22, k23 }, \
{ k30, k31, k32, k33 } \
}

View file

@ -0,0 +1,34 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _NUMPAD 0
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Numpad
* +-------+-------+-------+-------+
* | 7 | 8 | 9 | - |
* +-------+-------+-------+-------+
* | 4 | 5 | 6 | + |
* +-------+-------+-------+-------+
* | 1 | 2 | 3 | enter |
* +-------+-------+-------+-------+
* | 0 | . | / | * |
* +-------+-------+-------+-------+
*/
[_NUMPAD] = LAYOUT_ortho_4x4(
KC_P7, KC_P8, KC_P9, KC_MINS,
KC_P4, KC_P5, KC_P6, KC_PLUS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_PDOT,KC_PSLS,KC_ASTR
),
};

View file

@ -0,0 +1,39 @@
# JotPad16
![JotPad16](https://i.imgur.com/RwmqWuS.jpg)
A ortholinear keypad (4x4) made by jotix.
Keyboard Maintainer: [jotix](https://github.com/jotix)
Hardware Supported: Arduino Pro Micro
### Arduino Pro Micro Pinout
| rows | 0 | 1 | 2 | 3 |
|-------------|----|----|-----|-----|
| arduino pin | 10 | 16 | RXI | TX0 |
| qmk pin | B6 | B2 | D2 | D3 |
| columns | 0 | 1 | 2 | 3 |
|-------------|----|----|----|----|
| arduino pin | 9 | 8 | 14 | 15 |
| qmk pin | B5 | B4 | B3 | C3 |
| | QMK led | Backlight |
|-------------|-----------|-----------|
| Arduino pin | 7 | 6 |
| qmk pin | E6 | D7 |
### Compiling the Firmware
Make example for this keyboard (after setting up your build environment):
make handwired/jotpad16:default
### The Default Keymap
![Default Keymap](https://i.imgur.com/VJZcFRN.jpg)
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,66 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
LAYOUTS = ortho_4x4