1
0
Fork 0

adding all ErgoTravel Files (#3129)

* adding all ErgoTravel Files

* fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.c
This commit is contained in:
Pierre Constantineau 2018-06-05 19:15:19 +03:00 committed by Drashna Jaelre
parent 6b1350d764
commit c5b9533312
33 changed files with 2635 additions and 83 deletions

View file

@ -0,0 +1,90 @@
/*
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include QMK_KEYBOARD_CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0100
#define MANUFACTURER JPConstantineau.com
#define PRODUCT ErgoTravel Keyboard
#define DESCRIPTION Split 45 percent ergonomic keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
// wiring of each half
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1 @@
#include "ergotravel.h"

View file

@ -0,0 +1,24 @@
#ifndef ERGOTRAVEL_H
#define ERGOTRAVEL_H
#ifdef KEYBOARD_ergotravel_rev1
#include "rev1.h"
#endif
#include "quantum.h"
// Used to create a keymap using only KC_ prefixed keys
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15, R16,\
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25, R26,\
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
LAYOUT( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
)
#endif

162
keyboards/ergotravel/i2c.c Normal file
View file

@ -0,0 +1,162 @@
#include <util/twi.h>
#include <avr/io.h>
#include <stdlib.h>
#include <avr/interrupt.h>
#include <util/twi.h>
#include <stdbool.h>
#include "i2c.h"
#ifdef USE_I2C
// Limits the amount of we wait for any one i2c transaction.
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
// 9 bits, a single transaction will take around 90μs to complete.
//
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
// poll loop takes at least 8 clock cycles to execute
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
static volatile uint8_t slave_buffer_pos;
static volatile bool slave_has_register_set = false;
// Wait for an i2c operation to finish
inline static
void i2c_delay(void) {
uint16_t lim = 0;
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
lim++;
// easier way, but will wait slightly longer
// _delay_us(100);
}
// Setup twi to run at 100kHz
void i2c_master_init(void) {
// no prescaler
TWSR = 0;
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
// Check datasheets for more info.
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
}
// Start a transaction with the given i2c slave address. The direction of the
// transfer is set with I2C_READ and I2C_WRITE.
// returns: 0 => success
// 1 => error
uint8_t i2c_master_start(uint8_t address) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
i2c_delay();
// check that we started successfully
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
return 1;
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
return 1; // slave did not acknowledge
else
return 0; // success
}
// Finish the i2c transaction.
void i2c_master_stop(void) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
uint16_t lim = 0;
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
lim++;
}
// Write one byte to the i2c slave.
// returns 0 => slave ACK
// 1 => slave NACK
uint8_t i2c_master_write(uint8_t data) {
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
// check if the slave acknowledged us
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
}
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
// if ack=0 the acknowledge bit is not set.
// returns: byte read from i2c device
uint8_t i2c_master_read(int ack) {
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
i2c_delay();
return TWDR;
}
void i2c_reset_state(void) {
TWCR = 0;
}
void i2c_slave_init(uint8_t address) {
TWAR = address << 0; // slave i2c address
// TWEN - twi enable
// TWEA - enable address acknowledgement
// TWINT - twi interrupt flag
// TWIE - enable the twi interrupt
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
}
ISR(TWI_vect);
ISR(TWI_vect) {
uint8_t ack = 1;
switch(TW_STATUS) {
case TW_SR_SLA_ACK:
// this device has been addressed as a slave receiver
slave_has_register_set = false;
break;
case TW_SR_DATA_ACK:
// this device has received data as a slave receiver
// The first byte that we receive in this transaction sets the location
// of the read/write location of the slaves memory that it exposes over
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
// slave_buffer_pos after each write.
if(!slave_has_register_set) {
slave_buffer_pos = TWDR;
// don't acknowledge the master if this memory loctaion is out of bounds
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
ack = 0;
slave_buffer_pos = 0;
}
slave_has_register_set = true;
} else {
i2c_slave_buffer[slave_buffer_pos] = TWDR;
BUFFER_POS_INC();
}
break;
case TW_ST_SLA_ACK:
case TW_ST_DATA_ACK:
// master has addressed this device as a slave transmitter and is
// requesting data.
TWDR = i2c_slave_buffer[slave_buffer_pos];
BUFFER_POS_INC();
break;
case TW_BUS_ERROR: // something went wrong, reset twi state
TWCR = 0;
default:
break;
}
// Reset everything, so we are ready for the next TWI interrupt
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
}
#endif

View file

@ -0,0 +1,49 @@
#ifndef I2C_H
#define I2C_H
#include <stdint.h>
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
#define I2C_READ 1
#define I2C_WRITE 0
#define I2C_ACK 1
#define I2C_NACK 0
#define SLAVE_BUFFER_SIZE 0x10
// i2c SCL clock frequency
#define SCL_CLOCK 100000L
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
void i2c_master_init(void);
uint8_t i2c_master_start(uint8_t address);
void i2c_master_stop(void);
uint8_t i2c_master_write(uint8_t data);
uint8_t i2c_master_read(int);
void i2c_reset_state(void);
void i2c_slave_init(uint8_t address);
static inline unsigned char i2c_start_read(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_READ);
}
static inline unsigned char i2c_start_write(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_WRITE);
}
// from SSD1306 scrips
extern unsigned char i2c_rep_start(unsigned char addr);
extern void i2c_start_wait(unsigned char addr);
extern unsigned char i2c_readAck(void);
extern unsigned char i2c_readNak(void);
extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
#endif

View file

@ -0,0 +1,15 @@
{
"keyboard_name": "ErgoTravel",
"manufacturer": "jpconstantineau",
"identifier": "0x1256",
"url": "https://github.com/jpconstantineau/ErgoTravel",
"maintainer": "qmk",
"processor": "atmega32u4",
"width": 14.5,
"height": 5,
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
}
}
}

View file

@ -0,0 +1,46 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
//#define USE_SERIAL
#define USE_I2C
/* Select hand configuration */
//#define MASTER_LEFT
#define MASTER_RIGHT
//#define EE_HANDS
#define TAPPING_TOGGLE 2
// required if modifiers are defined in layers besided the default one.
#define PREVENT_STUCK_MODIFIERS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1,202 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _COLEMAK 0
#define _QWERTY 1
#define _NUMPAD 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
COLEMAK = SAFE_RANGE,
QWERTY,
NUMPAD,
LOWER,
RAISE,
ADJUST,
};
/* Fn keys */
enum {
F_SFT = 0,
F_ALT,
F_CTRL,
F_NUMPAD
// F_LOWER,
// F_RAISE,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_XXXX KC_NO
#define KC_CMK COLEMAK
#define KC_QWE QWERTY
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_QRAS QRAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del
#define KC_CPY LCTL(KC_C)
#define KC_PST LCTL(KC_V)
#define KC_SELA LCTL(KC_A)
#define KC_UDO LCTL(KC_Z)
#define KC_CUT LCTL(KC_X)
#define KC_SVE LCTL(KC_S)
#define KC_OSH F(F_SFT)
#define KC_OCTL F(F_CTRL)
#define KC_NUMP F(F_NUMPAD)
#define KC_SHESC MT(MOD_LSFT,KC_ESC)
#define KC_SHENT MT(MOD_RSFT,KC_ENT)
//#define KC_NUMP TG(_NUMPAD) // Toggle layer NUMPAD for use in KC_keymaps
//#define KC_RST RESET
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/
[_COLEMAK] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
TAB , Q , W , F , P , B ,LPRN, RPRN, J , L , U , Y ,SCLN,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
BSPC, A , R , S , T , G ,EQL , MINS, K , N , E , I , O ,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SHESC, Z , X , C , D , V ,NUMP, ENT, M , H ,COMM,DOT ,SLSH,SHENT,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
OCTL,LALT,LGUI,DEL ,LOWR, SPC, OSH, RASE,LEFT,RIGHT,RALT,RCTL
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , , , N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,DEL , , SPC, SPC , ,LEFT,DOWN, UP ,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NUMPAD] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , ,ASTR, P7 , P8 , P9 ,SLSH, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , ,PIPE, P4 , P5 , P6 ,MINS, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , ,COMM, P1 , P2 , P3 ,PLUS, ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , P0 ,NLCK, , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,XXXX,XXXX,XXXX,XXXX,CAPS, , ,PGUP,HOME, UP ,END ,DEL , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,SELA,LALT,LSFT,LCTL,SVE , , ,PGDN,LEFT,DOWN,RGHT,BSPC,INS ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,UDO ,CUT ,CPY ,PST ,XXXX, , ,XXXX,XXXX,COMM,DOT ,SLSH, ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,AMPR,PERC,HASH,EXLM,LPRN, , ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, 7 , 5 , 3 , 1 , 9 ,LBRC, RBRC, 8 , 0 , 2 , 4 , 6 ,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, GRV,TILD,XXXX,EQL ,PLUS, , ,UNDS,MINS,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , CMK,QWE , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , ,VOLD,VOLU,MUTE
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
const uint16_t PROGMEM fn_actions[] = {
[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT)
,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT)
,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD)
// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER) // FN1 - Momentary Layer 1 (Lower)
// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE) // FN2 - Momentary Layer 2 (Raise)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case COLEMAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_COLEMAK);
}
return false;
break;
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1,134 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
// #define MASTER_LEFT
#define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1,95 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
enum custom_layers {
_COLEMAK,
_ADJUST,
_RAISE,
_LOWER,
_QWERTY
};
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define BASELYR TO(_COLEMAK) // base layer
#define LOWER MO(_LOWER) // momentary lower layer
#define RAISE MO(_RAISE) // momentary raise layer
#define ADJUST MO(_ADJUST) // momentary adjust layer
#define QWERTY TG(_QWERTY)
#define LLOWER TG(_LOWER) // lock for lower layer
#define LRAISE TG(_RAISE) // lock for raise layer
#define LHALF LALT(LGUI(KC_LEFT)) // spec left half screen
#define TLHALF LCTL(LGUI(KC_LEFT)) // spec top left half
#define BLHALF LCTL(LSFT(LGUI(KC_LEFT))) // spec bottom left half
#define RHALF LALT(LGUI(KC_RIGHT)) // spec right half screen
#define TRHALF LCTL(LGUI(KC_RIGHT)) // spec top right half
#define BRHALF LCTL(LSFT(LGUI(KC_RIGHT))) // spec bottom right half
#define SAFBCK LGUI(KC_LBRC) // safari back
#define SAFFWD LGUI(KC_RBRC) // safari forward
#define CENTER LALT(LGUI(KC_C)) // spec center
#define FULL LALT(LGUI(KC_F)) // spec full screen
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_COLEMAK] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G ,KC_LCBR, KC_RCBR, KC_J , KC_L , KC_U , KC_Y ,KC_SCLN,KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D ,KC_LPRN, KC_RPRN, KC_H , KC_N , KC_E , KC_I , KC_O ,KC_QUOT,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_BSLS, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBRC , KC_RBRC , KC_K , KC_M ,KC_COMM, KC_DOT,KC_SLSH,KC_ENT ,
//,------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
ADJUST ,KC_LCTL,KC_LALT,KC_LGUI, LOWER, KC_SPC, KC_LSFT, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RGHT
//,------+-------+-------+-------+-------/-------/ \-------\-------+-------+-------+-------+-------'
),
[_ADJUST] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RESET ,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
//|------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
_______,KC_F10 ,KC_F11 ,KC_F12 ,LLOWER ,XXXXXXX, XXXXXXX,LRAISE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX
//`------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
),
[_RAISE] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, TLHALF, CENTER, TRHALF, XXXXXXX, KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_TILD,KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, LHALF, FULL, RHALF, XXXXXXX, KC_VOLU,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_GRV, KC_MINS,KC_PLUS,KC_UNDS,KC_EQL, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, BLHALF, XXXXXXX, BRHALF, XXXXXXX, KC_VOLD,
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_TRNS,KC_SPC, KC_LSFT, KC_TRNS, XXXXXXX, KC_F14, KC_F15, KC_MUTE
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
),
[_LOWER] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, KC_7, KC_8, KC_9, KC_MINS, KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX, XXXXXXX, SAFBCK, XXXXXXX, SAFFWD, KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, KC_4, KC_5, KC_6, KC_PLUS, XXXXXXX,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, KC_1, KC_2, KC_3, KC_ASTR, KC_ENT,
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_SPC, KC_LSFT, KC_0, KC_0, KC_DOT, KC_SLASH, XXXXXXX
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
}
return true;
}

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1,129 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,42 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
//#define MASTER_LEFT
#define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 26
#define RGBLIGHT_HUE_STEP 20
#define RGBLIGHT_SAT_STEP 20
#define RGBLIGHT_VAL_STEP 20
#define RGBLIGHT_LIMIT_VAL 220
#endif

View file

@ -0,0 +1,327 @@
#include "ergotravel.h"
#include "action_layer.h"
#include "eeconfig.h"
#include "mousekey.h"
#include "process_unicode.h"
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _NUMBERS 1
#define _SYMBOLS 2
#define _CODING 3
#define _NAVIGATION 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
CODING_SPACE,
NUMBERS_SPACE,
SYMBOLS_SPACE,
NAVIGATE_SPACE,
TABLE_FLIP,
RESET_TABLE,
SHRUG,
LOOK_OF_DISAPPROVAL
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_ADJT MO(_ADJUST)
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
#define KC_RSEN MT(MOD_RSFT, KC_ENT) // Tap for enter, hold for right shift
#define KC_LCCA MT(MOD_LCTL, KC_CAPS) // Tap for caps lock, hold for left control
#define KC_SHDE MT(MOD_LSFT, KC_DEL) // Tap for delete, hold for left shift
#define KC_NAVI MO(_NAVIGATION)
#define KC_COSP CODING_SPACE
#define KC_NUSP NUMBERS_SPACE
#define KC_SYSP SYMBOLS_SPACE
#define KC_NASP NAVIGATE_SPACE
#define KC_FLIP TABLE_FLIP
#define KC_TSET RESET_TABLE
#define KC_SRUG SHRUG
#define KC_DISA LOOK_OF_DISAPPROVAL
#define KC_RST RESET
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
TAB , Q , W , E , R , T ,HOME, PGUP, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LCCA, A , S , D , F , G ,END , PGDN, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SHDE, Z , X , C , V , B ,LGUI, RALT, N , M ,COMM,DOT ,SLSH,RSEN,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
ESC ,ADJT,LALT,ENT ,NUSP,NASP, SYSP,COSP,RCTL,NAVI,ADJT,DEL
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NUMBERS] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 ,MPLY, VOLU, 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,MNXT, VOLD,FLIP,TSET,SRUG,DISA, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_SYMBOLS] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE,EXLM, AT ,HASH,DLR ,PERC,MPLY, VOLU,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,MNXT, VOLD, , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_CODING] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , ,LCBR,RCBR, ,MPLY, VOLU, ,AMPR,PIPE,DLR , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,LPRN,RPRN, ,MNXT, VOLD, ,UNDS,MINS,ASTR, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,LBRC,RBRC, , , , ,PLUS,EQL , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NAVIGATION] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , UP , , ,MPLY, VOLU,WH_U,BTN1,MS_U,BTN1, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, ,LEFT,DOWN,RGHT, ,MNXT, VOLD,WH_D,MS_L,MS_D,MS_R, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
F1 ,F2 ,F3 ,F4 ,F5 ,F6 , , ,F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,RTOG,RVAI,RHUI,RSAI, , , , , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,RMOD,RVAD,RHUD,RSAD, , , ,RST , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
uint16_t custom_lt_timer;
keypos_t prv_key_pressed;
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
// set_unicode_input_mode(UC_LNX); // Linux
set_unicode_input_mode(UC_OSX); // Mac OSX
// set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki)
//set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if(record->event.pressed) prv_key_pressed = record->event.key;
#define IS_KEYPOS_SAME(keyone,keytwo) ((keyone.col==keytwo.col)&&(keyone.row==keytwo.row))
#define ANOTHER_KEY_PRESSED (!IS_KEYPOS_SAME(prv_key_pressed, record->event.key))
inline void tap(uint16_t keycode) {
register_code(keycode);
unregister_code(keycode);
};
inline void swapInput(void) {
register_code(KC_LGUI);
tap(KC_SPC);
unregister_code(KC_LGUI);
};
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case CODING_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_CODING);
} else {
layer_off(_CODING);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case NUMBERS_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_NUMBERS);
} else {
layer_off(_NUMBERS);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case SYMBOLS_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_SYMBOLS);
} else {
layer_off(_SYMBOLS);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case NAVIGATE_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_NAVIGATION);
} else {
layer_off(_NAVIGATION);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case TABLE_FLIP:
if (record->event.pressed) {
swapInput();
register_code(KC_RSFT);
tap(KC_9);
unregister_code(KC_RSFT);
process_unicode((0x256F|QK_UNICODE), record); // Arm
process_unicode((0x00B0|QK_UNICODE), record); // Eye
process_unicode((0x25A1|QK_UNICODE), record); // Mouth
process_unicode((0x00B0|QK_UNICODE), record); // Eye
register_code(KC_RSFT);
tap(KC_0);
unregister_code(KC_RSFT);
process_unicode((0x256F|QK_UNICODE), record); // Arm
tap(KC_SPC);
process_unicode((0x0361|QK_UNICODE), record); // Flippy
tap(KC_SPC);
process_unicode((0x253B|QK_UNICODE), record); // Table
process_unicode((0x2501|QK_UNICODE), record); // Table
process_unicode((0x253B|QK_UNICODE), record); // Table
swapInput();
}
return false;
break;
case RESET_TABLE: // ┬──┬ ( ゜-゜ノ)
if (record->event.pressed) {
swapInput();
process_unicode((0x252C|QK_UNICODE), record); // Table
process_unicode((0x2500|QK_UNICODE), record); // Table
process_unicode((0x2500|QK_UNICODE), record); // Table
process_unicode((0x252C|QK_UNICODE), record); // Table
tap(KC_SPC);
process_unicode((0x30CE|QK_UNICODE), record); // Arm
register_code(KC_RSFT);
tap(KC_9);
unregister_code(KC_RSFT);
tap(KC_SPC);
process_unicode((0x309C|QK_UNICODE), record); // Eye
tap(KC_MINS);
process_unicode((0x309C|QK_UNICODE), record); // Eye
process_unicode((0x30CE|QK_UNICODE), record); // Arm
register_code(KC_RSFT);
tap(KC_0);
unregister_code(KC_RSFT);
swapInput();
}
return false;
break;
case SHRUG: // ¯\_(ツ)_/¯
if (record->event.pressed) {
swapInput();
process_unicode((0x00AF|QK_UNICODE), record); // Hand
tap(KC_BSLS); // Arm
register_code(KC_RSFT);
tap(KC_UNDS); // Arm
tap(KC_LPRN); // Head
unregister_code(KC_RSFT);
process_unicode((0x30C4|QK_UNICODE), record); // Face
register_code(KC_RSFT);
tap(KC_RPRN); // Head
tap(KC_UNDS); // Arm
unregister_code(KC_RSFT);
tap(KC_SLSH); // Arm
process_unicode((0x00AF|QK_UNICODE), record); // Hand
swapInput();
}
return false;
break;
case LOOK_OF_DISAPPROVAL: // ಠ_ಠ
if(record->event.pressed){
swapInput();
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
register_code(KC_RSFT);
tap(KC_MINS);
unregister_code(KC_RSFT);
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
swapInput();
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,7 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = no
UNICODE_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,482 @@
/*
Copyright 2018 Pierre Constantineau
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"
#include "backlight.h"
#ifdef USE_I2C
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5
#define SERIAL_LED_ADDR 0x00
#define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void);
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#endif
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
unselect_rows();
init_cols();
TX_RX_LED_INIT;
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
PORTD ^= (1 << 2);
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#ifdef USE_I2C
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at 0x00
err = i2c_master_write(0x00);
if (err) goto i2c_error;
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
err = i2c_master_write(get_backlight_level());
#else
// Write zero, so our byte index is the same
err = i2c_master_write(0x00);
#endif
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
return 0;
}
#else // USE_SERIAL
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (serial_update_buffers()) {
return 1;
}
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i];
}
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
#endif
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#ifdef USE_I2C
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
// turn on the indicator led when halves are disconnected
TXLED1;
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
// turn off the indicator led on no error
TXLED0;
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_I2C
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(i2c_slave_buffer[0]);
#endif
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[i+1] = matrix[offset+i];
}
#else // USE_SERIAL
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i];
}
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
#endif
#endif
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Clear data in matrix row
current_matrix[current_row] = 0;
// Select row and wait for row selecton to stabilize
select_row(current_row);
wait_us(30);
// For each col...
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
// Select the col pin to read (active low)
uint8_t pin = col_pins[col_index];
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
// Populate the matrix row with the state of the col pin
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static void select_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
static void select_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#endif

View file

@ -0,0 +1,28 @@
ErgoTravel
====
![ErgoTravel](https://i.imgur.com/H9t6Q7b.png)
A split ergo 4x6 keyboard with 2 or 3 thumb keys and extra inner macro keys designed by Pierre Constantineau. [More info on the GitHub Repo](https://github.com/jpconstantineau/ErgoTravel).
**Status** The ErgoTravel is currently being beta-tested.
Keyboard Maintainer: [/u/jpconstantineau](https://github.com/jpconstantineau)
Hardware Supported: Pro Micro (ATmega32U4)
Hardware Availability: [Group Buys](https://keyboards.jpconstantineau.com/) or order your own [yourself](https://github.com/jpconstantineau/ErgoTravel/blob/master/OrderingInstructions.md)
Make example for this keyboard (after setting up your build environment):
make ergotravel/rev1:default
Example of flashing this keyboard:
make ergotravel/rev1:default:avrdude
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau)

View file

@ -0,0 +1,90 @@
/*
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include QMK_KEYBOARD_CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0100
#define MANUFACTURER JPConstantineau.com
#define PRODUCT ErgoTravel Keyboard
#define DESCRIPTION Split 45 percent ergonomic keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
// wiring of each half
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,22 @@
#include "rev1.h"
#ifdef SSD1306OLED
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
#endif
void matrix_init_kb(void) {
// // green led on
// DDRD |= (1<<5);
// PORTD &= ~(1<<5);
// // orange led on
// DDRB |= (1<<0);
// PORTB &= ~(1<<0);
matrix_init_user();
};

View file

@ -0,0 +1,37 @@
#ifndef REV1_H
#define REV1_H
#include "ergotravel.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
#define LAYOUT( \
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05,R06, \
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15,R16, \
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25,R26, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, KC_NO }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
{ R26, R25, R24, R23, R22, R21, R20 }, \
{ R35, R34, R33, R32, R31, R30, KC_NO } \
}
#endif

View file

@ -0,0 +1 @@
BACKLIGHT_ENABLE = no

View file

@ -0,0 +1,74 @@
SRC += matrix.c \
i2c.c \
split_util.c \
serial.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SUBPROJECT_rev1 = yes
USE_I2C = yes # I2C is used between the sides
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = ergotravel/rev1

View file

@ -0,0 +1,228 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "serial.h"
#ifndef USE_I2C
// Serial pulse period in microseconds. Its probably a bad idea to lower this
// value.
#define SERIAL_DELAY 24
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#define SLAVE_DATA_CORRUPT (1<<0)
volatile uint8_t status = 0;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static
void serial_input(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void serial_master_init(void) {
serial_output();
serial_high();
}
void serial_slave_init(void) {
serial_input();
// Enable INT0
EIMSK |= _BV(INT0);
// Trigger on falling edge of INT0
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
}
// Used by the master to synchronize timing with the slave.
static
void sync_recv(void) {
serial_input();
// This shouldn't hang if the slave disconnects because the
// serial line will float to high if the slave does disconnect.
while (!serial_read_pin());
serial_delay();
}
// Used by the slave to send a synchronization signal to the master.
static
void sync_send(void) {
serial_output();
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static
uint8_t serial_read_byte(void) {
uint8_t byte = 0;
serial_input();
for ( uint8_t i = 0; i < 8; ++i) {
byte = (byte << 1) | serial_read_pin();
serial_delay();
_delay_us(1);
}
return byte;
}
// Sends a byte with MSB ordering
static
void serial_write_byte(uint8_t data) {
uint8_t b = 8;
serial_output();
while( b-- ) {
if(data & (1 << b)) {
serial_high();
} else {
serial_low();
}
serial_delay();
}
}
// interrupt handle to be used by the slave device
ISR(SERIAL_PIN_INTERRUPT) {
sync_send();
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_slave_buffer[i]);
sync_send();
checksum += serial_slave_buffer[i];
}
serial_write_byte(checksum);
sync_send();
// wait for the sync to finish sending
serial_delay();
// read the middle of pulses
_delay_us(SERIAL_DELAY/2);
uint8_t checksum_computed = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_master_buffer[i] = serial_read_byte();
sync_send();
checksum_computed += serial_master_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_send();
serial_input(); // end transaction
if ( checksum_computed != checksum_received ) {
status |= SLAVE_DATA_CORRUPT;
} else {
status &= ~SLAVE_DATA_CORRUPT;
}
}
inline
bool serial_slave_DATA_CORRUPT(void) {
return status & SLAVE_DATA_CORRUPT;
}
// Copies the serial_slave_buffer to the master and sends the
// serial_master_buffer to the slave.
//
// Returns:
// 0 => no error
// 1 => slave did not respond
int serial_update_buffers(void) {
// this code is very time dependent, so we need to disable interrupts
cli();
// signal to the slave that we want to start a transaction
serial_output();
serial_low();
_delay_us(1);
// wait for the slaves response
serial_input();
serial_high();
_delay_us(SERIAL_DELAY);
// check if the slave is present
if (serial_read_pin()) {
// slave failed to pull the line low, assume not present
sei();
return 1;
}
// if the slave is present syncronize with it
sync_recv();
uint8_t checksum_computed = 0;
// receive data from the slave
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_slave_buffer[i] = serial_read_byte();
sync_recv();
checksum_computed += serial_slave_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_recv();
if (checksum_computed != checksum_received) {
sei();
return 1;
}
uint8_t checksum = 0;
// send data to the slave
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_master_buffer[i]);
sync_recv();
checksum += serial_master_buffer[i];
}
serial_write_byte(checksum);
sync_recv();
// always, release the line when not in use
serial_output();
serial_high();
sei();
return 0;
}
#endif

View file

@ -0,0 +1,26 @@
#ifndef MY_SERIAL_H
#define MY_SERIAL_H
#include "config.h"
#include <stdbool.h>
/* TODO: some defines for interrupt setup */
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#define SERIAL_PIN_MASK _BV(PD0)
#define SERIAL_PIN_INTERRUPT INT0_vect
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH 1
// Buffers for master - slave communication
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
bool serial_slave_data_corrupt(void);
#endif

View file

@ -0,0 +1,86 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "config.h"
#include "timer.h"
#ifdef USE_I2C
# include "i2c.h"
#else
# include "serial.h"
#endif
volatile bool isLeftHand = true;
static void setup_handedness(void) {
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
#endif
#endif
}
static void keyboard_master_setup(void) {
#ifdef USE_I2C
i2c_master_init();
#ifdef SSD1306OLED
matrix_master_OLED_init ();
#endif
#else
serial_master_init();
#endif
}
static void keyboard_slave_setup(void) {
timer_init();
#ifdef USE_I2C
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
void keyboard_slave_loop(void) {
matrix_init();
while (1) {
matrix_slave_scan();
}
}
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
split_keyboard_setup();
if (!has_usb()) {
keyboard_slave_loop();
}
}

View file

@ -0,0 +1,20 @@
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void keyboard_slave_loop(void);
void matrix_master_OLED_init (void);
#endif