Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

adding all ErgoTravel Files (#3129)

Browse source 
* adding all ErgoTravel Files

* fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.c
This commit is contained in:
Pierre Constantineau 2018-06-05 19:15:19 +03:00 committed by Drashna Jaelre
parent 6b1350d764
commit c5b9533312
33 changed files with 2635 additions and 83 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

90
keyboards/ergotravel/config.h Normal file
View file

@ -0,0 +1,90 @@
/*
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include QMK_KEYBOARD_CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0100
#define MANUFACTURER JPConstantineau.com
#define PRODUCT ErgoTravel Keyboard
#define DESCRIPTION Split 45 percent ergonomic keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
// wiring of each half
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

1
keyboards/ergotravel/ergotravel.c Normal file
View file

@ -0,0 +1 @@
#include "ergotravel.h"

24
keyboards/ergotravel/ergotravel.h Normal file
View file

@ -0,0 +1,24 @@
#ifndef ERGOTRAVEL_H
#define ERGOTRAVEL_H
#ifdef KEYBOARD_ergotravel_rev1
#include "rev1.h"
#endif
#include "quantum.h"
// Used to create a keymap using only KC_ prefixed keys
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15, R16,\
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25, R26,\
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
LAYOUT( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
)
#endif

162
keyboards/ergotravel/i2c.c Normal file
View file

@ -0,0 +1,162 @@
#include <util/twi.h>
#include <avr/io.h>
#include <stdlib.h>
#include <avr/interrupt.h>
#include <util/twi.h>
#include <stdbool.h>
#include "i2c.h"
#ifdef USE_I2C
// Limits the amount of we wait for any one i2c transaction.
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
// 9 bits, a single transaction will take around 90μs to complete.
//
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
// poll loop takes at least 8 clock cycles to execute
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
static volatile uint8_t slave_buffer_pos;
static volatile bool slave_has_register_set = false;
// Wait for an i2c operation to finish
inline static
void i2c_delay(void) {
uint16_t lim = 0;
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
lim++;
// easier way, but will wait slightly longer
// _delay_us(100);
}
// Setup twi to run at 100kHz
void i2c_master_init(void) {
// no prescaler
TWSR = 0;
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
// Check datasheets for more info.
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
}
// Start a transaction with the given i2c slave address. The direction of the
// transfer is set with I2C_READ and I2C_WRITE.
// returns: 0 => success
// 1 => error
uint8_t i2c_master_start(uint8_t address) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
i2c_delay();
// check that we started successfully
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
return 1;
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
return 1; // slave did not acknowledge
else
return 0; // success
}
// Finish the i2c transaction.
void i2c_master_stop(void) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
uint16_t lim = 0;
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
lim++;
}
// Write one byte to the i2c slave.
// returns 0 => slave ACK
// 1 => slave NACK
uint8_t i2c_master_write(uint8_t data) {
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
// check if the slave acknowledged us
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
}
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
// if ack=0 the acknowledge bit is not set.
// returns: byte read from i2c device
uint8_t i2c_master_read(int ack) {
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
i2c_delay();
return TWDR;
}
void i2c_reset_state(void) {
TWCR = 0;
}
void i2c_slave_init(uint8_t address) {
TWAR = address << 0; // slave i2c address
// TWEN - twi enable
// TWEA - enable address acknowledgement
// TWINT - twi interrupt flag
// TWIE - enable the twi interrupt
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
}
ISR(TWI_vect);
ISR(TWI_vect) {
uint8_t ack = 1;
switch(TW_STATUS) {
case TW_SR_SLA_ACK:
// this device has been addressed as a slave receiver
slave_has_register_set = false;
break;
case TW_SR_DATA_ACK:
// this device has received data as a slave receiver
// The first byte that we receive in this transaction sets the location
// of the read/write location of the slaves memory that it exposes over
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
// slave_buffer_pos after each write.
if(!slave_has_register_set) {
slave_buffer_pos = TWDR;
// don't acknowledge the master if this memory loctaion is out of bounds
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
ack = 0;
slave_buffer_pos = 0;
}
slave_has_register_set = true;
} else {
i2c_slave_buffer[slave_buffer_pos] = TWDR;
BUFFER_POS_INC();
}
break;
case TW_ST_SLA_ACK:
case TW_ST_DATA_ACK:
// master has addressed this device as a slave transmitter and is
// requesting data.
TWDR = i2c_slave_buffer[slave_buffer_pos];
BUFFER_POS_INC();
break;
case TW_BUS_ERROR: // something went wrong, reset twi state
TWCR = 0;
default:
break;
}
// Reset everything, so we are ready for the next TWI interrupt
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
}
#endif

49
keyboards/ergotravel/i2c.h Normal file
View file

@ -0,0 +1,49 @@
#ifndef I2C_H
#define I2C_H
#include <stdint.h>
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
#define I2C_READ 1
#define I2C_WRITE 0
#define I2C_ACK 1
#define I2C_NACK 0
#define SLAVE_BUFFER_SIZE 0x10
// i2c SCL clock frequency
#define SCL_CLOCK 100000L
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
void i2c_master_init(void);
uint8_t i2c_master_start(uint8_t address);
void i2c_master_stop(void);
uint8_t i2c_master_write(uint8_t data);
uint8_t i2c_master_read(int);
void i2c_reset_state(void);
void i2c_slave_init(uint8_t address);
static inline unsigned char i2c_start_read(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_READ);
}
static inline unsigned char i2c_start_write(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_WRITE);
}
// from SSD1306 scrips
extern unsigned char i2c_rep_start(unsigned char addr);
extern void i2c_start_wait(unsigned char addr);
extern unsigned char i2c_readAck(void);
extern unsigned char i2c_readNak(void);
extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
#endif

15
keyboards/ergotravel/info.json Normal file
View file

@ -0,0 +1,15 @@
{
"keyboard_name": "ErgoTravel",
"manufacturer": "jpconstantineau",
"identifier": "0x1256",
"url": "https://github.com/jpconstantineau/ErgoTravel",
"maintainer": "qmk",
"processor": "atmega32u4",
"width": 14.5,
"height": 5,
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
}
}
}

46
keyboards/ergotravel/keymaps/ckofy/config.h Normal file
View file

@ -0,0 +1,46 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
//#define USE_SERIAL
#define USE_I2C
/* Select hand configuration */
//#define MASTER_LEFT
#define MASTER_RIGHT
//#define EE_HANDS
#define TAPPING_TOGGLE 2
// required if modifiers are defined in layers besided the default one.
#define PREVENT_STUCK_MODIFIERS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

202
keyboards/ergotravel/keymaps/ckofy/keymap.c Normal file
View file

@ -0,0 +1,202 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _COLEMAK 0
#define _QWERTY 1
#define _NUMPAD 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
COLEMAK = SAFE_RANGE,
QWERTY,
NUMPAD,
LOWER,
RAISE,
ADJUST,
};
/* Fn keys */
enum {
F_SFT = 0,
F_ALT,
F_CTRL,
F_NUMPAD
// F_LOWER,
// F_RAISE,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_XXXX KC_NO
#define KC_CMK COLEMAK
#define KC_QWE QWERTY
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_QRAS QRAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del
#define KC_CPY LCTL(KC_C)
#define KC_PST LCTL(KC_V)
#define KC_SELA LCTL(KC_A)
#define KC_UDO LCTL(KC_Z)
#define KC_CUT LCTL(KC_X)
#define KC_SVE LCTL(KC_S)
#define KC_OSH F(F_SFT)
#define KC_OCTL F(F_CTRL)
#define KC_NUMP F(F_NUMPAD)
#define KC_SHESC MT(MOD_LSFT,KC_ESC)
#define KC_SHENT MT(MOD_RSFT,KC_ENT)
//#define KC_NUMP TG(_NUMPAD) // Toggle layer NUMPAD for use in KC_keymaps
//#define KC_RST RESET
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/
[_COLEMAK] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
TAB , Q , W , F , P , B ,LPRN, RPRN, J , L , U , Y ,SCLN,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
BSPC, A , R , S , T , G ,EQL , MINS, K , N , E , I , O ,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SHESC, Z , X , C , D , V ,NUMP, ENT, M , H ,COMM,DOT ,SLSH,SHENT,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
OCTL,LALT,LGUI,DEL ,LOWR, SPC, OSH, RASE,LEFT,RIGHT,RALT,RCTL
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , , , N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,DEL , , SPC, SPC , ,LEFT,DOWN, UP ,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NUMPAD] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , , , , , ,ASTR, P7 , P8 , P9 ,SLSH, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , ,PIPE, P4 , P5 , P6 ,MINS, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , ,COMM, P1 , P2 , P3 ,PLUS, ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , P0 ,NLCK, , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,XXXX,XXXX,XXXX,XXXX,CAPS, , ,PGUP,HOME, UP ,END ,DEL , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,SELA,LALT,LSFT,LCTL,SVE , , ,PGDN,LEFT,DOWN,RGHT,BSPC,INS ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,UDO ,CUT ,CPY ,PST ,XXXX, , ,XXXX,XXXX,COMM,DOT ,SLSH, ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
,AMPR,PERC,HASH,EXLM,LPRN, , ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, 7 , 5 , 3 , 1 , 9 ,LBRC, RBRC, 8 , 0 , 2 , 4 , 6 ,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, GRV,TILD,XXXX,EQL ,PLUS, , ,UNDS,MINS,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , CMK,QWE , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , ,VOLD,VOLU,MUTE
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
const uint16_t PROGMEM fn_actions[] = {
[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT)
,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT)
,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD)
// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER) // FN1 - Momentary Layer 1 (Lower)
// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE) // FN2 - Momentary Layer 2 (Raise)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case COLEMAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_COLEMAK);
}
return false;
break;
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

3
keyboards/ergotravel/keymaps/ckofy/rules.mk Normal file
View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

41
keyboards/ergotravel/keymaps/default/config.h Normal file
View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

134
keyboards/ergotravel/keymaps/default/keymap.c Normal file
View file

@ -0,0 +1,134 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

3
keyboards/ergotravel/keymaps/default/rules.mk Normal file
View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

41
keyboards/ergotravel/keymaps/ian/config.h Normal file
View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
// #define MASTER_LEFT
#define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

95
keyboards/ergotravel/keymaps/ian/keymap.c Normal file
View file

@ -0,0 +1,95 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
enum custom_layers {
_COLEMAK,
_ADJUST,
_RAISE,
_LOWER,
_QWERTY
};
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define BASELYR TO(_COLEMAK) // base layer
#define LOWER MO(_LOWER) // momentary lower layer
#define RAISE MO(_RAISE) // momentary raise layer
#define ADJUST MO(_ADJUST) // momentary adjust layer
#define QWERTY TG(_QWERTY)
#define LLOWER TG(_LOWER) // lock for lower layer
#define LRAISE TG(_RAISE) // lock for raise layer
#define LHALF LALT(LGUI(KC_LEFT)) // spec left half screen
#define TLHALF LCTL(LGUI(KC_LEFT)) // spec top left half
#define BLHALF LCTL(LSFT(LGUI(KC_LEFT))) // spec bottom left half
#define RHALF LALT(LGUI(KC_RIGHT)) // spec right half screen
#define TRHALF LCTL(LGUI(KC_RIGHT)) // spec top right half
#define BRHALF LCTL(LSFT(LGUI(KC_RIGHT))) // spec bottom right half
#define SAFBCK LGUI(KC_LBRC) // safari back
#define SAFFWD LGUI(KC_RBRC) // safari forward
#define CENTER LALT(LGUI(KC_C)) // spec center
#define FULL LALT(LGUI(KC_F)) // spec full screen
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_COLEMAK] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G ,KC_LCBR, KC_RCBR, KC_J , KC_L , KC_U , KC_Y ,KC_SCLN,KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D ,KC_LPRN, KC_RPRN, KC_H , KC_N , KC_E , KC_I , KC_O ,KC_QUOT,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_BSLS, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBRC , KC_RBRC , KC_K , KC_M ,KC_COMM, KC_DOT,KC_SLSH,KC_ENT ,
//,------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
ADJUST ,KC_LCTL,KC_LALT,KC_LGUI, LOWER, KC_SPC, KC_LSFT, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RGHT
//,------+-------+-------+-------+-------/-------/ \-------\-------+-------+-------+-------+-------'
),
[_ADJUST] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RESET ,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
//|------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
_______,KC_F10 ,KC_F11 ,KC_F12 ,LLOWER ,XXXXXXX, XXXXXXX,LRAISE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX
//`------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
),
[_RAISE] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, TLHALF, CENTER, TRHALF, XXXXXXX, KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_TILD,KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, LHALF, FULL, RHALF, XXXXXXX, KC_VOLU,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
KC_GRV, KC_MINS,KC_PLUS,KC_UNDS,KC_EQL, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, BLHALF, XXXXXXX, BRHALF, XXXXXXX, KC_VOLD,
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_TRNS,KC_SPC, KC_LSFT, KC_TRNS, XXXXXXX, KC_F14, KC_F15, KC_MUTE
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
),
[_LOWER] = LAYOUT(
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
BASELYR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, KC_7, KC_8, KC_9, KC_MINS, KC_BSPC,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX, XXXXXXX, SAFBCK, XXXXXXX, SAFFWD, KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, KC_4, KC_5, KC_6, KC_PLUS, XXXXXXX,
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, KC_1, KC_2, KC_3, KC_ASTR, KC_ENT,
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_SPC, KC_LSFT, KC_0, KC_0, KC_DOT, KC_SLASH, XXXXXXX
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
}
return true;
}

3
keyboards/ergotravel/keymaps/ian/rules.mk Normal file
View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

41
keyboards/ergotravel/keymaps/jpconstantineau/config.h Normal file
View file

@ -0,0 +1,41 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

129
keyboards/ergotravel/keymaps/jpconstantineau/keymap.c Normal file
View file

@ -0,0 +1,129 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_ADJT ADJUST
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

3
keyboards/ergotravel/keymaps/jpconstantineau/rules.mk Normal file
View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

42
keyboards/ergotravel/keymaps/viet/config.h Normal file
View file

@ -0,0 +1,42 @@
/*
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
//#define MASTER_LEFT
#define MASTER_RIGHT
// #define EE_HANDS
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 26
#define RGBLIGHT_HUE_STEP 20
#define RGBLIGHT_SAT_STEP 20
#define RGBLIGHT_VAL_STEP 20
#define RGBLIGHT_LIMIT_VAL 220
#endif

327
keyboards/ergotravel/keymaps/viet/keymap.c Normal file
View file

@ -0,0 +1,327 @@
#include "ergotravel.h"
#include "action_layer.h"
#include "eeconfig.h"
#include "mousekey.h"
#include "process_unicode.h"
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _NUMBERS 1
#define _SYMBOLS 2
#define _CODING 3
#define _NAVIGATION 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
CODING_SPACE,
NUMBERS_SPACE,
SYMBOLS_SPACE,
NAVIGATE_SPACE,
TABLE_FLIP,
RESET_TABLE,
SHRUG,
LOOK_OF_DISAPPROVAL
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_ADJT MO(_ADJUST)
#define KC_RST RESET
#define KC_BL_S BL_STEP
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
#define KC_RSAI RGB_SAI
#define KC_RSAD RGB_SAD
#define KC_RVAI RGB_VAI
#define KC_RVAD RGB_VAD
#define KC_RSEN MT(MOD_RSFT, KC_ENT) // Tap for enter, hold for right shift
#define KC_LCCA MT(MOD_LCTL, KC_CAPS) // Tap for caps lock, hold for left control
#define KC_SHDE MT(MOD_LSFT, KC_DEL) // Tap for delete, hold for left shift
#define KC_NAVI MO(_NAVIGATION)
#define KC_COSP CODING_SPACE
#define KC_NUSP NUMBERS_SPACE
#define KC_SYSP SYMBOLS_SPACE
#define KC_NASP NAVIGATE_SPACE
#define KC_FLIP TABLE_FLIP
#define KC_TSET RESET_TABLE
#define KC_SRUG SHRUG
#define KC_DISA LOOK_OF_DISAPPROVAL
#define KC_RST RESET
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
TAB , Q , W , E , R , T ,HOME, PGUP, Y , U , I , O , P ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
LCCA, A , S , D , F , G ,END , PGDN, H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
SHDE, Z , X , C , V , B ,LGUI, RALT, N , M ,COMM,DOT ,SLSH,RSEN,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
ESC ,ADJT,LALT,ENT ,NUSP,NASP, SYSP,COSP,RCTL,NAVI,ADJT,DEL
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NUMBERS] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE, 1 , 2 , 3 , 4 , 5 ,MPLY, VOLU, 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,MNXT, VOLD,FLIP,TSET,SRUG,DISA, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_SYMBOLS] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
GRAVE,EXLM, AT ,HASH,DLR ,PERC,MPLY, VOLU,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,MNXT, VOLD, , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_CODING] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , ,LCBR,RCBR, ,MPLY, VOLU, ,AMPR,PIPE,DLR , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,LPRN,RPRN, ,MNXT, VOLD, ,UNDS,MINS,ASTR, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , ,LBRC,RBRC, , , , ,PLUS,EQL , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_NAVIGATION] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
, , , UP , , ,MPLY, VOLU,WH_U,BTN1,MS_U,BTN1, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, ,LEFT,DOWN,RGHT, ,MNXT, VOLD,WH_D,MS_L,MS_D,MS_R, , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , , , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
F1 ,F2 ,F3 ,F4 ,F5 ,F6 , , ,F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,RTOG,RVAI,RHUI,RSAI, , , , , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
,RMOD,RVAD,RHUD,RSAD, , , ,RST , , , , , ,
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
uint16_t custom_lt_timer;
keypos_t prv_key_pressed;
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
// set_unicode_input_mode(UC_LNX); // Linux
set_unicode_input_mode(UC_OSX); // Mac OSX
// set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki)
//set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if(record->event.pressed) prv_key_pressed = record->event.key;
#define IS_KEYPOS_SAME(keyone,keytwo) ((keyone.col==keytwo.col)&&(keyone.row==keytwo.row))
#define ANOTHER_KEY_PRESSED (!IS_KEYPOS_SAME(prv_key_pressed, record->event.key))
inline void tap(uint16_t keycode) {
register_code(keycode);
unregister_code(keycode);
};
inline void swapInput(void) {
register_code(KC_LGUI);
tap(KC_SPC);
unregister_code(KC_LGUI);
};
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case CODING_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_CODING);
} else {
layer_off(_CODING);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case NUMBERS_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_NUMBERS);
} else {
layer_off(_NUMBERS);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case SYMBOLS_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_SYMBOLS);
} else {
layer_off(_SYMBOLS);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case NAVIGATE_SPACE:
if (record->event.pressed) {
custom_lt_timer = timer_read();
layer_on(_NAVIGATION);
} else {
layer_off(_NAVIGATION);
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
}
return false;
break;
case TABLE_FLIP:
if (record->event.pressed) {
swapInput();
register_code(KC_RSFT);
tap(KC_9);
unregister_code(KC_RSFT);
process_unicode((0x256F|QK_UNICODE), record); // Arm
process_unicode((0x00B0|QK_UNICODE), record); // Eye
process_unicode((0x25A1|QK_UNICODE), record); // Mouth
process_unicode((0x00B0|QK_UNICODE), record); // Eye
register_code(KC_RSFT);
tap(KC_0);
unregister_code(KC_RSFT);
process_unicode((0x256F|QK_UNICODE), record); // Arm
tap(KC_SPC);
process_unicode((0x0361|QK_UNICODE), record); // Flippy
tap(KC_SPC);
process_unicode((0x253B|QK_UNICODE), record); // Table
process_unicode((0x2501|QK_UNICODE), record); // Table
process_unicode((0x253B|QK_UNICODE), record); // Table
swapInput();
}
return false;
break;
case RESET_TABLE: // ┬──┬ ノ( ゜-゜ノ)
if (record->event.pressed) {
swapInput();
process_unicode((0x252C|QK_UNICODE), record); // Table
process_unicode((0x2500|QK_UNICODE), record); // Table
process_unicode((0x2500|QK_UNICODE), record); // Table
process_unicode((0x252C|QK_UNICODE), record); // Table
tap(KC_SPC);
process_unicode((0x30CE|QK_UNICODE), record); // Arm
register_code(KC_RSFT);
tap(KC_9);
unregister_code(KC_RSFT);
tap(KC_SPC);
process_unicode((0x309C|QK_UNICODE), record); // Eye
tap(KC_MINS);
process_unicode((0x309C|QK_UNICODE), record); // Eye
process_unicode((0x30CE|QK_UNICODE), record); // Arm
register_code(KC_RSFT);
tap(KC_0);
unregister_code(KC_RSFT);
swapInput();
}
return false;
break;
case SHRUG: // ¯\_(ツ)_/¯
if (record->event.pressed) {
swapInput();
process_unicode((0x00AF|QK_UNICODE), record); // Hand
tap(KC_BSLS); // Arm
register_code(KC_RSFT);
tap(KC_UNDS); // Arm
tap(KC_LPRN); // Head
unregister_code(KC_RSFT);
process_unicode((0x30C4|QK_UNICODE), record); // Face
register_code(KC_RSFT);
tap(KC_RPRN); // Head
tap(KC_UNDS); // Arm
unregister_code(KC_RSFT);
tap(KC_SLSH); // Arm
process_unicode((0x00AF|QK_UNICODE), record); // Hand
swapInput();
}
return false;
break;
case LOOK_OF_DISAPPROVAL: // ಠ_ಠ
if(record->event.pressed){
swapInput();
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
register_code(KC_RSFT);
tap(KC_MINS);
unregister_code(KC_RSFT);
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
swapInput();
}
return false;
break;
}
return true;
}

7
keyboards/ergotravel/keymaps/viet/rules.mk Normal file
View file

@ -0,0 +1,7 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = no
UNICODE_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

482
keyboards/ergotravel/matrix.c Normal file
View file

@ -0,0 +1,482 @@
/*
Copyright 2018 Pierre Constantineau
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"
#include "backlight.h"
#ifdef USE_I2C
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5
#define SERIAL_LED_ADDR 0x00
#define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void);
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#endif
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
unselect_rows();
init_cols();
TX_RX_LED_INIT;
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
PORTD ^= (1 << 2);
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#ifdef USE_I2C
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at 0x00
err = i2c_master_write(0x00);
if (err) goto i2c_error;
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
err = i2c_master_write(get_backlight_level());
#else
// Write zero, so our byte index is the same
err = i2c_master_write(0x00);
#endif
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
return 0;
}
#else // USE_SERIAL
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (serial_update_buffers()) {
return 1;
}
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i];
}
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
#endif
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#ifdef USE_I2C
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
// turn on the indicator led when halves are disconnected
TXLED1;
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
// turn off the indicator led on no error
TXLED0;
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_I2C
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(i2c_slave_buffer[0]);
#endif
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[i+1] = matrix[offset+i];
}
#else // USE_SERIAL
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i];
}
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
#endif
#endif
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Clear data in matrix row
current_matrix[current_row] = 0;
// Select row and wait for row selecton to stabilize
select_row(current_row);
wait_us(30);
// For each col...
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
// Select the col pin to read (active low)
uint8_t pin = col_pins[col_index];
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
// Populate the matrix row with the state of the col pin
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static void select_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
static void select_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#endif

28
keyboards/ergotravel/readme.md Normal file
View file

@ -0,0 +1,28 @@
ErgoTravel
====
![ErgoTravel](https://i.imgur.com/H9t6Q7b.png)
A split ergo 4x6 keyboard with 2 or 3 thumb keys and extra inner macro keys designed by Pierre Constantineau. [More info on the GitHub Repo](https://github.com/jpconstantineau/ErgoTravel).
**Status** The ErgoTravel is currently being beta-tested.
Keyboard Maintainer: [/u/jpconstantineau](https://github.com/jpconstantineau)
Hardware Supported: Pro Micro (ATmega32U4)
Hardware Availability: [Group Buys](https://keyboards.jpconstantineau.com/) or order your own [yourself](https://github.com/jpconstantineau/ErgoTravel/blob/master/OrderingInstructions.md)
Make example for this keyboard (after setting up your build environment):
make ergotravel/rev1:default
Example of flashing this keyboard:
make ergotravel/rev1:default:avrdude
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau)

90
keyboards/ergotravel/rev1/config.h Normal file
View file

@ -0,0 +1,90 @@
/*
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include QMK_KEYBOARD_CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0100
#define MANUFACTURER JPConstantineau.com
#define PRODUCT ErgoTravel Keyboard
#define DESCRIPTION Split 45 percent ergonomic keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
// wiring of each half
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

22
keyboards/ergotravel/rev1/rev1.c Normal file
View file

@ -0,0 +1,22 @@
#include "rev1.h"
#ifdef SSD1306OLED
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
#endif
void matrix_init_kb(void) {
// // green led on
// DDRD |= (1<<5);
// PORTD &= ~(1<<5);
// // orange led on
// DDRB |= (1<<0);
// PORTB &= ~(1<<0);
matrix_init_user();
};

37
keyboards/ergotravel/rev1/rev1.h Normal file
View file

@ -0,0 +1,37 @@
#ifndef REV1_H
#define REV1_H
#include "ergotravel.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
#define LAYOUT( \
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05,R06, \
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15,R16, \
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25,R26, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, KC_NO }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
{ R26, R25, R24, R23, R22, R21, R20 }, \
{ R35, R34, R33, R32, R31, R30, KC_NO } \
}
#endif

1
keyboards/ergotravel/rev1/rules.mk Normal file
View file

@ -0,0 +1 @@
BACKLIGHT_ENABLE = no

74
keyboards/ergotravel/rules.mk Normal file
View file

@ -0,0 +1,74 @@
SRC += matrix.c \
i2c.c \
split_util.c \
serial.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SUBPROJECT_rev1 = yes
USE_I2C = yes # I2C is used between the sides
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = ergotravel/rev1

228
keyboards/ergotravel/serial.c Normal file
View file

@ -0,0 +1,228 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "serial.h"
#ifndef USE_I2C
// Serial pulse period in microseconds. Its probably a bad idea to lower this
// value.
#define SERIAL_DELAY 24
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#define SLAVE_DATA_CORRUPT (1<<0)
volatile uint8_t status = 0;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static
void serial_input(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void serial_master_init(void) {
serial_output();
serial_high();
}
void serial_slave_init(void) {
serial_input();
// Enable INT0
EIMSK |= _BV(INT0);
// Trigger on falling edge of INT0
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
}
// Used by the master to synchronize timing with the slave.
static
void sync_recv(void) {
serial_input();
// This shouldn't hang if the slave disconnects because the
// serial line will float to high if the slave does disconnect.
while (!serial_read_pin());
serial_delay();
}
// Used by the slave to send a synchronization signal to the master.
static
void sync_send(void) {
serial_output();
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static
uint8_t serial_read_byte(void) {
uint8_t byte = 0;
serial_input();
for ( uint8_t i = 0; i < 8; ++i) {
byte = (byte << 1) | serial_read_pin();
serial_delay();
_delay_us(1);
}
return byte;
}
// Sends a byte with MSB ordering
static
void serial_write_byte(uint8_t data) {
uint8_t b = 8;
serial_output();
while( b-- ) {
if(data & (1 << b)) {
serial_high();
} else {
serial_low();
}
serial_delay();
}
}
// interrupt handle to be used by the slave device
ISR(SERIAL_PIN_INTERRUPT) {
sync_send();
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_slave_buffer[i]);
sync_send();
checksum += serial_slave_buffer[i];
}
serial_write_byte(checksum);
sync_send();
// wait for the sync to finish sending
serial_delay();
// read the middle of pulses
_delay_us(SERIAL_DELAY/2);
uint8_t checksum_computed = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_master_buffer[i] = serial_read_byte();
sync_send();
checksum_computed += serial_master_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_send();
serial_input(); // end transaction
if ( checksum_computed != checksum_received ) {
status |= SLAVE_DATA_CORRUPT;
} else {
status &= ~SLAVE_DATA_CORRUPT;
}
}
inline
bool serial_slave_DATA_CORRUPT(void) {
return status & SLAVE_DATA_CORRUPT;
}
// Copies the serial_slave_buffer to the master and sends the
// serial_master_buffer to the slave.
//
// Returns:
// 0 => no error
// 1 => slave did not respond
int serial_update_buffers(void) {
// this code is very time dependent, so we need to disable interrupts
cli();
// signal to the slave that we want to start a transaction
serial_output();
serial_low();
_delay_us(1);
// wait for the slaves response
serial_input();
serial_high();
_delay_us(SERIAL_DELAY);
// check if the slave is present
if (serial_read_pin()) {
// slave failed to pull the line low, assume not present
sei();
return 1;
}
// if the slave is present syncronize with it
sync_recv();
uint8_t checksum_computed = 0;
// receive data from the slave
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_slave_buffer[i] = serial_read_byte();
sync_recv();
checksum_computed += serial_slave_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_recv();
if (checksum_computed != checksum_received) {
sei();
return 1;
}
uint8_t checksum = 0;
// send data to the slave
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_master_buffer[i]);
sync_recv();
checksum += serial_master_buffer[i];
}
serial_write_byte(checksum);
sync_recv();
// always, release the line when not in use
serial_output();
serial_high();
sei();
return 0;
}
#endif

26
keyboards/ergotravel/serial.h Normal file
View file

@ -0,0 +1,26 @@
#ifndef MY_SERIAL_H
#define MY_SERIAL_H
#include "config.h"
#include <stdbool.h>
/* TODO: some defines for interrupt setup */
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#define SERIAL_PIN_MASK _BV(PD0)
#define SERIAL_PIN_INTERRUPT INT0_vect
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH 1
// Buffers for master - slave communication
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
bool serial_slave_data_corrupt(void);
#endif

86
keyboards/ergotravel/split_util.c Normal file
View file

@ -0,0 +1,86 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "config.h"
#include "timer.h"
#ifdef USE_I2C
# include "i2c.h"
#else
# include "serial.h"
#endif
volatile bool isLeftHand = true;
static void setup_handedness(void) {
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
#endif
#endif
}
static void keyboard_master_setup(void) {
#ifdef USE_I2C
i2c_master_init();
#ifdef SSD1306OLED
matrix_master_OLED_init ();
#endif
#else
serial_master_init();
#endif
}
static void keyboard_slave_setup(void) {
timer_init();
#ifdef USE_I2C
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
void keyboard_slave_loop(void) {
matrix_init();
while (1) {
matrix_slave_scan();
}
}
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
split_keyboard_setup();
if (!has_usb()) {
keyboard_slave_loop();
}
}

20
keyboards/ergotravel/split_util.h Normal file
View file

@ -0,0 +1,20 @@
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void keyboard_slave_loop(void);
void matrix_master_OLED_init (void);
#endif