diff --git a/keyboards/iris/iris.h b/keyboards/iris/iris.h
index afad9a0d6d..4212462c15 100644
--- a/keyboards/iris/iris.h
+++ b/keyboards/iris/iris.h
@@ -11,6 +11,7 @@
 #endif
 
 #include "quantum.h"
+#include "../../zeal60/zeal60_keycodes.h"
 
 // Used to create a keymap using only KC_ prefixed keys
 #define LAYOUT_kc( \
diff --git a/keyboards/iris/keymaps/default/keymap.c b/keyboards/iris/keymaps/default/keymap.c
index 4644c3d9b5..f67b71fc1a 100644
--- a/keyboards/iris/keymaps/default/keymap.c
+++ b/keyboards/iris/keymaps/default/keymap.c
@@ -2,21 +2,14 @@
 
 extern keymap_config_t keymap_config;
 
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
+#define _MAIN 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = LAYOUT(
+  [_MAIN] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -26,11 +19,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_HOME,          KC_END,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
   //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
-                                    KC_LGUI, LOWER,   KC_ENT,                    KC_SPC,  RAISE,   KC_LALT
+                                    KC_LGUI, FN_MO13, KC_ENT,                    KC_SPC,  FN_MO23, KC_LALT
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_LOWER] = LAYOUT(
+  [_FN1] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                            KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -44,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_RAISE] = LAYOUT(
+  [_FN2] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -58,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_ADJUST] = LAYOUT(
+  [_FN3] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -73,42 +66,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
 }
diff --git a/keyboards/iris/rev1/config.h b/keyboards/iris/rev1/config.h
index 3b31ca0d7e..1eddb54b4f 100644
--- a/keyboards/iris/rev1/config.h
+++ b/keyboards/iris/rev1/config.h
@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
-/* disable debug print */
-// #define NO_DEBUG
+// EEPROM usage
 
-/* disable print */
-// #define NO_PRINT
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/iris/rev1/rev1.c b/keyboards/iris/rev1/rev1.c
index fe91fa3ead..9694d122df 100644
--- a/keyboards/iris/rev1/rev1.c
+++ b/keyboards/iris/rev1/rev1.c
@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
diff --git a/keyboards/iris/rev1_led/config.h b/keyboards/iris/rev1_led/config.h
index e9739c0031..4505c22299 100644
--- a/keyboards/iris/rev1_led/config.h
+++ b/keyboards/iris/rev1_led/config.h
@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
-/* disable debug print */
-// #define NO_DEBUG
+// EEPROM usage
 
-/* disable print */
-// #define NO_PRINT
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/iris/rev1_led/rev1_led.c b/keyboards/iris/rev1_led/rev1_led.c
index d08eaea662..af5fc9440b 100644
--- a/keyboards/iris/rev1_led/rev1_led.c
+++ b/keyboards/iris/rev1_led/rev1_led.c
@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
diff --git a/keyboards/iris/rev2/config.h b/keyboards/iris/rev2/config.h
index d43d4b1c64..e0465ca8a4 100644
--- a/keyboards/iris/rev2/config.h
+++ b/keyboards/iris/rev2/config.h
@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0200
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
-/* disable debug print */
-// #define NO_DEBUG
+// EEPROM usage
 
-/* disable print */
-// #define NO_PRINT
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/iris/rev2/rev2.c b/keyboards/iris/rev2/rev2.c
index 133fce66ad..8575243f0d 100644
--- a/keyboards/iris/rev2/rev2.c
+++ b/keyboards/iris/rev2/rev2.c
@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
diff --git a/keyboards/iris/rev3/config.h b/keyboards/iris/rev3/config.h
index 5642512f39..ad5937dc15 100644
--- a/keyboards/iris/rev3/config.h
+++ b/keyboards/iris/rev3/config.h
@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0300
 #define MANUFACTURER    Keebio
@@ -35,6 +35,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // wiring of each half
 #define MATRIX_ROW_PINS { D2, D3, D5, D7, D6 }
 #define MATRIX_COL_PINS { F1, F4, F5, F6, D4, B4 }
+#define SPLIT_HAND_PIN F0
+#define QMK_ESC_OUTPUT D2
+#define QMK_ESC_INPUT F1
+#define QMK_LED B0
+#define QMK_SPEAKER C6
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B5 }
+#define ENCODERS_PAD_B { B7 }
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -68,20 +77,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN F7
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
-/* disable debug print */
-// #define NO_DEBUG
+// EEPROM usage
 
-/* disable print */
-// #define NO_PRINT
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/iris/rev3/rev3.c b/keyboards/iris/rev3/rev3.c
index d8272db0f5..7e49330c1d 100644
--- a/keyboards/iris/rev3/rev3.c
+++ b/keyboards/iris/rev3/rev3.c
@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
@@ -39,4 +25,3 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
     {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
 };
 #endif
-
diff --git a/keyboards/iris/rev3/rev3.h b/keyboards/iris/rev3/rev3.h
index d44cef9a6b..da9da84403 100644
--- a/keyboards/iris/rev3/rev3.h
+++ b/keyboards/iris/rev3/rev3.h
@@ -12,8 +12,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #define LAYOUT( \
     L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
     L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
diff --git a/keyboards/iris/rev3/rules.mk b/keyboards/iris/rev3/rules.mk
index d7463419b4..d7e0da9367 100644
--- a/keyboards/iris/rev3/rules.mk
+++ b/keyboards/iris/rev3/rules.mk
@@ -1,2 +1,3 @@
 RGBLIGHT_ENABLE = yes
 BACKLIGHT_ENABLE = yes
+ENCODER_ENABLE = yes
diff --git a/keyboards/iris/rules.mk b/keyboards/iris/rules.mk
index e93d7dae80..69bc62f876 100644
--- a/keyboards/iris/rules.mk
+++ b/keyboards/iris/rules.mk
@@ -1,36 +1,6 @@
-# MCU name
 MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
 # Bootloader
@@ -50,8 +20,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
+
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
@@ -61,10 +32,15 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 SPLIT_KEYBOARD = yes
 
 DEFAULT_FOLDER = iris/rev2
+
+# VIA Support - Comment these 3 lines out to disable
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+SRC += keyboards/wilba_tech/wt_main.c