1
0
Fork 0

Added stanleylai's personal keymap (#420)

* Added WS2812 support for KC60

* Reorganized WS2812 support into its own keymap

* Fixed relative link in README

* Moved WS2812 mention in README to the bottom

* Fixed titling in WS2812 README

* Reverted KC60 Makefile and default keymap back

* Moved RGB specific config.h to ws2812 keymap folder

* Added my personal keymap

* Updated compiled hex

* Reverted KC60 files to 3f6fac47 before pull request #419
This commit is contained in:
Stanley Lai 2016-06-20 21:49:54 -07:00 committed by Jack Humbert
parent 650e77c657
commit c976c03547
12 changed files with 248 additions and 4 deletions

View file

@ -27,7 +27,7 @@
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -111,3 +111,4 @@ AUDIO_ENABLE ?= no # Audio output on port C6
ifndef QUANTUM_DIR
include ../../Makefile
endif

View file

@ -45,7 +45,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0
// Pins for rows include: D0 D1 F6 F7 D5
// KC60 Version 2
// KC60 Version 2
#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
#define UNUSED_PINS

View file

@ -62,7 +62,7 @@ void backlight_init_ports()
DDRB |= (1<<6);
PORTB &= ~(1<<6);
// Use full 16-bit resolution.
// Use full 16-bit resolution.
ICR1 = 0xFFFF;
// I could write a wall of text here to explain... but TL;DW
@ -99,7 +99,7 @@ void backlight_set(uint8_t level)
// Set the brightness
CHANNEL = 0xFFFF;
}
else
else
{
// Turn on PWM control of PB6
TCCR1A |= _BV(COM1B1);

View file

@ -0,0 +1,63 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= no # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= yes # USB Nkey Rollover
ifndef QUANTUM_DIR
include ../../Makefile
endif

View file

@ -0,0 +1,26 @@
Stanley Lai's Split Right Shift with Dedicated Arrow Keys
======================
![Image of KC60 with RGB Underglow](../ws2812/ws2812_example.jpg)
## Quantum MK Firmware
For the full Quantum feature list, see [the parent README.md](/README.md).
## Keymap Notes
- Keymap setup with split Right Shift in mind.
- Right-side modifiers are setup as dedicated arrow keys
### Base Layer Reference
- Fn Layer indicated on keycap front legends.
- Tapping Caps Lock key toggles Caps. Holding it down momentarily switches us to the Fn Layer.
- Holding down "Fn" and "Page Down" momentarily switches us to the RGB Layer. Tapping "Page Down" behaves as expected.
![Base Layer](base_layer.jpg)
### RGB Layer Reference
![RGB Layer](rgb_layer.jpg)
## WS2812 Support
By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference.
### Build
To build this keymap, simply run `make KEYMAP=stanleylai`.

Binary file not shown.

After

Width:  |  Height:  |  Size: 34 KiB

Binary file not shown.

View file

@ -0,0 +1,3 @@
// Use configs from WS2812 enabled Keymap
#include "../ws2812/config.h"

View file

@ -0,0 +1,151 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include "kc60.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _RGBL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// See base_layer.png and rgb_layer.png for layout reference
// Base Default Layer
// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions.
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, MO(_FL), KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT),
// Function layer
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
KC_NO, KC_MPRV,KC_UP, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK, KC_PAUS, KC_INS, \
KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_TRNS,KC_NO, KC_MUTE,KC_VOLD,KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, LT(_RGBL, KC_PGUP),\
KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_TRNS,KC_HOME, KC_PGDN, KC_END),
// RGB Layer
[_RGBL] = KEYMAP(
#ifdef RGBLIGHT_ENABLE
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_TRNS,KC_NO, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS),
#else
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS),
#endif
};
enum function_id {
SHIFT_ESC,
#ifdef RGBLIGHT_ENABLE
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
#endif
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC),
#ifdef RGBLIGHT_ENABLE
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
#endif
};
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask;
switch (id) {
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
#ifdef RGBLIGHT_ENABLE
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
#endif
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 19 KiB