1
0
Fork 0

Add 6-ball macropad

This commit is contained in:
Danny Nguyen 2017-10-31 17:03:14 -04:00 committed by Jack Humbert
parent fca03e15b9
commit c9a0436422
7 changed files with 186 additions and 0 deletions

5
keyboards/6ball/6ball.c Normal file
View file

@ -0,0 +1,5 @@
#include "6ball.h"
void matrix_init_kb(void) {
matrix_init_user();
}

16
keyboards/6ball/6ball.h Normal file
View file

@ -0,0 +1,16 @@
#ifndef SIXBALL_H
#define SIXBALL_H
#include "quantum.h"
#define KEYMAP( \
k01, k02, k03, \
k04, k05, k06 \
) \
{ \
{ k02, k03, k06, k05, k04, k01 } \
}
#define KC_KEYMAP(k01, k02, k03, k04, k05, k06) KEYMAP(KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06)
#endif

53
keyboards/6ball/config.h Normal file
View file

@ -0,0 +1,53 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x0007
#define DEVICE_VER 0x0001
#define MANUFACTURER That-Canadian
#define PRODUCT 6-Ball
#define DESCRIPTION 6-Ball Macropuck
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 6
/* pin-out */
#define MATRIX_ROW_PINS { F5 }
#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 }
#define UNUSED_PINS
/* ws2812 RGB LED */
#define RGB_DI_PIN F7
#define RGBLIGHT_TIMER
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 6 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define TAPPING_TERM 200
#endif

View file

@ -0,0 +1,28 @@
#include "6ball.h"
#define _MAIN 0
#define _FN 1
#define KC_ KC_TRNS
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
#define KC_X0 LT(_FN, KC_ESC)
#define KC_RTOG RGB_TOG
#define KC_RMOD RGB_MOD
#define KC_RHUI RGB_HUI
#define KC_RHUD RGB_HUD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MAIN] = KC_KEYMAP(
F , X0 ,LCTL,
R , D , M
),
[_FN] = KC_KEYMAP(
F , ,RHUI,
RTOG,RMOD,RHUD
)
};

View file

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

14
keyboards/6ball/readme.md Normal file
View file

@ -0,0 +1,14 @@
6-Ball
======
A circular 6-key macropad made by ThatCanadian.
Keyboard Maintainer: QMK Community
Hardware Supported: Pro Micro ATmega32U4
Hardware Availability: ThatCanadian
Make example for this keyboard (after setting up your build environment):
make 6ball:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

67
keyboards/6ball/rules.mk Normal file
View file

@ -0,0 +1,67 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend