1
0
Fork 0

Merge remote-tracking branch 'upstream/master' into develop

This commit is contained in:
fauxpark 2021-06-17 17:22:01 +10:00
commit d04f7bc160
27 changed files with 1401 additions and 27 deletions

View file

@ -137,6 +137,8 @@ You can override the default songs by doing something like this in your `config.
A full list of sounds can be found in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) - feel free to add your own to this list! All available notes can be seen in [quantum/audio/musical_notes.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/musical_notes.h). A full list of sounds can be found in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) - feel free to add your own to this list! All available notes can be seen in [quantum/audio/musical_notes.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/musical_notes.h).
Additionally, if you with to maintain your own list of songs (such as ones that may be copyrighted) and not have them added to the repo, you can create a `user_song_list.h` file and place it in your keymap (or userspace) folder. This file will be automatically included, it just needs to exist.
To play a custom sound at a particular time, you can define a song like this (near the top of the file): To play a custom sound at a particular time, you can define a song like this (near the top of the file):
```c ```c

View file

@ -268,6 +268,20 @@ void oled_write_ln(const char *data, bool invert);
// image such as a logo or to avoid burn-in as it's much, much less cpu intensive // image such as a logo or to avoid burn-in as it's much, much less cpu intensive
void oled_pan(bool left); void oled_pan(bool left);
// Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index);
// Sets a specific pixel on or off
// Coordinates start at top-left and go right and down for positive x and y
void oled_write_pixel(uint8_t x, uint8_t y, bool on);
// Writes a PROGMEM string to the buffer at current cursor position // Writes a PROGMEM string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true // Advances the cursor while writing, inverts the pixels if true
// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM // Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
@ -279,23 +293,9 @@ void oled_write_P(const char *data, bool invert);
// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
void oled_write_ln_P(const char *data, bool invert); void oled_write_ln_P(const char *data, bool invert);
// Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index);
// Writes a PROGMEM string to the buffer at current cursor position // Writes a PROGMEM string to the buffer at current cursor position
void oled_write_raw_P(const char *data, uint16_t size); void oled_write_raw_P(const char *data, uint16_t size);
// Sets a specific pixel on or off
// Coordinates start at top-left and go right and down for positive x and y
void oled_write_pixel(uint8_t x, uint8_t y, bool on);
// Can be used to manually turn on the screen if it is off // Can be used to manually turn on the screen if it is off
// Returns true if the screen was on or turns on // Returns true if the screen was on or turns on
bool oled_on(void); bool oled_on(void);

View file

@ -115,7 +115,7 @@ bool oled_initialized = false;
bool oled_active = false; bool oled_active = false;
bool oled_scrolling = false; bool oled_scrolling = false;
uint8_t oled_brightness = OLED_BRIGHTNESS; uint8_t oled_brightness = OLED_BRIGHTNESS;
uint8_t oled_rotation = 0; oled_rotation_t oled_rotation = 0;
uint8_t oled_rotation_width = 0; uint8_t oled_rotation_width = 0;
uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values
uint8_t oled_scroll_start = 0; uint8_t oled_scroll_start = 0;
@ -158,7 +158,7 @@ static void InvertCharacter(uint8_t *cursor) {
} }
} }
bool oled_init(uint8_t rotation) { bool oled_init(oled_rotation_t rotation) {
#if defined(USE_I2C) && defined(SPLIT_KEYBOARD) #if defined(USE_I2C) && defined(SPLIT_KEYBOARD)
if (!is_keyboard_master()) { if (!is_keyboard_master()) {
return true; return true;
@ -491,8 +491,9 @@ void oled_write_raw(const char *data, uint16_t size) {
uint16_t cursor_start_index = oled_cursor - &oled_buffer[0]; uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index; if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) { for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
if (oled_buffer[i] == data[i]) continue; uint8_t c = *data++;
oled_buffer[i] = data[i]; if (oled_buffer[i] == c) continue;
oled_buffer[i] = c;
oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
} }
} }

View file

@ -226,13 +226,17 @@ void oled_write(const char *data, bool invert);
void oled_write_ln(const char *data, bool invert); void oled_write_ln(const char *data, bool invert);
// Pans the buffer to the right (or left by passing true) by moving contents of the buffer // Pans the buffer to the right (or left by passing true) by moving contents of the buffer
// Useful for moving the screen in preparation for new drawing
void oled_pan(bool left); void oled_pan(bool left);
// Returns a pointer to the requested start index in the buffer plus remaining // Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct // buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index); oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size); void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index); void oled_write_raw_byte(const char data, uint16_t index);
// Sets a specific pixel on or off // Sets a specific pixel on or off
@ -251,17 +255,11 @@ void oled_write_P(const char *data, bool invert);
// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
void oled_write_ln_P(const char *data, bool invert); void oled_write_ln_P(const char *data, bool invert);
// Writes a PROGMEM string to the buffer at current cursor position
void oled_write_raw_P(const char *data, uint16_t size); void oled_write_raw_P(const char *data, uint16_t size);
#else #else
// Writes a string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
# define oled_write_P(data, invert) oled_write(data, invert) # define oled_write_P(data, invert) oled_write(data, invert)
// Writes a string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
# define oled_write_ln_P(data, invert) oled_write(data, invert) # define oled_write_ln_P(data, invert) oled_write(data, invert)
# define oled_write_raw_P(data, size) oled_write_raw(data, size) # define oled_write_raw_P(data, size) oled_write_raw(data, size)
#endif // defined(__AVR__) #endif // defined(__AVR__)

View file

@ -0,0 +1,62 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
LAYER0,
LAYER1,
LAYER2,
};
// Tap Dance Declarations
enum {
TD_M_D = 0,
TD_P_M
};
// Tap Dance Definition
qk_tap_dance_action_t tap_dance_actions[] = {
//Tap once for minus, tap twice for divide
[TD_M_D] = ACTION_TAP_DANCE_DOUBLE(KC_PMNS, KC_PSLS),
//Tap once for plus, tap twice for multiply
[TD_P_M] = ACTION_TAP_DANCE_DOUBLE(KC_PPLS, KC_PAST)
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER0] = LAYOUT_2u(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
MO(LAYER2), KC_LALT, LT(LAYER1, KC_SPC), KC_SPC, KC_RALT, KC_LGUI
),
[LAYER1] = LAYOUT_2u(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, KC_7, KC_8, KC_9, KC_PMNS, KC_PSLS, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_4, KC_5, KC_6, KC_PPLS, KC_PAST, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_1, KC_2, KC_3, XXXXXXX, XXXXXXX, KC_RSFT,
XXXXXXX, _______, _______, KC_0, KC_PDOT, _______
),
[LAYER2] = LAYOUT_2u(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL, XXXXXXX,
_______, KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};

102
keyboards/kmac_pad/config.h Normal file
View file

@ -0,0 +1,102 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4B4D // KM
#define PRODUCT_ID 0x4143 // AC
#define DEVICE_VER 0x0104
#define MANUFACTURER KBDMania
#define PRODUCT KMAC PAD
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
* The KMAC uses demultiplexers for the cols, they are only included here as documentation.
* See matrix.c for more details.
*/
#define MATRIX_ROW_PINS { E2, D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { C7, C6, B6, B5 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
// #define DIODE_DIRECTION COL2ROW
// #define LED_CAPS_LOCK_PIN B0
// #define LED_SCROLL_LOCK_PIN E6
// #define LED_PIN_ON_STATE 0
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,35 @@
{
"keyboard_name": "KMAC PAD",
"maintainer": "talsu",
"width": 4,
"height": 6.5,
"layouts": {
"LAYOUT": {
"layout": [
{"label":"K00", "x":3, "y":0},
{"label":"K10", "x":0, "y":1.25},
{"label":"K11", "x":1, "y":1.25},
{"label":"K12", "x":2, "y":1.25},
{"label":"K13", "x":3, "y":1.25},
{"label":"K20", "x":0, "y":2.25},
{"label":"K21", "x":1, "y":2.25},
{"label":"K22", "x":2, "y":2.25},
{"label":"K23", "x":3, "y":2.25, "h":2},
{"label":"K30", "x":0, "y":3.25},
{"label":"K31", "x":1, "y":3.25},
{"label":"K32", "x":2, "y":3.25},
{"label":"K40", "x":0, "y":4.25},
{"label":"K41", "x":1, "y":4.25},
{"label":"K42", "x":2, "y":4.25},
{"label":"K43", "x":3, "y":4.25, "h":2},
{"label":"K50", "x":0, "y":5.25, "w":2},
{"label":"K52", "x":2, "y":5.25}
]
}
}
}

View file

@ -0,0 +1,143 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum kmac_pad_keycodes {
MD_BOOT = SAFE_RANGE,
MCR1,
MCR2,
MCR3,
MCR4,
MCR5,
MCR6,
MCR7,
MCR8,
MCR9,
MCR10,
MCR11,
MCR12
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
TG(1),
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_PDOT ),
[1] = LAYOUT( /* FN */
KC_TRNS,
MCR1, MCR2, MCR3, KC_TRNS,
MCR4, MCR5, MCR6, KC_TRNS,
MCR7, MCR8, MCR9,
MCR10, MCR11, MCR12, KC_TRNS,
KC_TRNS, MD_BOOT )
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case MD_BOOT:
{
static uint32_t key_timer;
if (record->event.pressed) {
key_timer = timer_read32();
} else {
if (timer_elapsed32(key_timer) >= 2000) {
reset_keyboard();
}
}
return false;
}
case MCR1:
if (record->event.pressed) {
SEND_STRING("Macro 1");
}
return false;
case MCR2:
if (record->event.pressed) {
SEND_STRING("Macro 2");
}
return false;
case MCR3:
if (record->event.pressed) {
SEND_STRING("Macro 3");
}
return false;
case MCR4:
if (record->event.pressed) {
SEND_STRING("Macro 4");
}
return false;
case MCR5:
if (record->event.pressed) {
SEND_STRING("Macro 5");
}
return false;
case MCR6:
if (record->event.pressed) {
SEND_STRING("Macro 6");
}
return false;
case MCR7:
if (record->event.pressed) {
SEND_STRING("Macro 7");
}
return false;
case MCR8:
if (record->event.pressed) {
SEND_STRING("Macro 8");
}
return false;
case MCR9:
if (record->event.pressed) {
SEND_STRING("Macro 9");
}
return false;
case MCR10:
if (record->event.pressed) {
SEND_STRING("Macro 10");
}
return false;
case MCR11:
if (record->event.pressed) {
SEND_STRING("Macro 12");
}
return false;
case MCR12:
if (record->event.pressed) {
SEND_STRING("Macro 12");
}
return false;
default:
return true;
}
}
bool led_update_user(led_t led_state) {
writePin(B1, led_state.num_lock);
return false;
}
layer_state_t layer_state_set_user(layer_state_t state) {
writePin(B3, !IS_LAYER_ON_STATE(state, 0));
return state;
}

View file

@ -0,0 +1,61 @@
# The default keymap for KMAC PAD
This is the default keymap. It implements the same features as the official default KMAC PAD firmware.
## Layers
The keymap has two layers. Press the 'FN' key to toggle the Default layer and Function layer.
### Layer 1: Default Layer
,---.
|TG1|
`---'
,---------------.
|NUM| / | * | - |
|---------------|
| 7 | 8 | 9 | |
|-----------| + |
| 4 | 5 | 6 | |
|---------------|
| 1 | 2 | 3 | |
|-----------|Ent|
| 0 | . | |
'---------------'
### Layer 2: Function Layer
,---.
|TG1|
`---'
,---------------.
|M1 |M2 |M3 | |
|---------------|
|M4 |M5 |M6 | |
|-----------| |
|M7 |M8 |M9 | |
|---------------|
|M10|M11|M12| |
|-----------| |
| | | |
'---------------'
## Macros
The default macro is typed with meaningless strings that exist as samples.
| Macro | Action |
|:-----:| -------------------------------------- |
| 1 | Types `Macro 1` |
| 2 | Types `Macro 2` |
| 3 | Types `Macro 3` |
| 4 | Types `Macro 4` |
| 5 | Types `Macro 5` |
| 6 | Types `Macro 6` |
| 7 | Types `Macro 7` |
| 8 | Types `Macro 8` |
| 9 | Types `Macro 9` |
| 10 | Types `Macro 10` |
| 11 | Types `Macro 11` |
| 12 | Types `Macro 12` |

View file

@ -0,0 +1,29 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "kmac_pad.h"
void keyboard_pre_init_kb(void) {
/* Set Backlight pin as output
* FN Pin PB3
* PAD Pin PB1
*/
setPinOutput(B3);
setPinOutput(B1);
keyboard_pre_init_user();
}

View file

@ -0,0 +1,37 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K00, \
K10, K11, K12, K13, \
K20, K21, K22, K23, \
K30, K31, K32, \
K40, K41, K42, K43, \
K50, K52 \
) \
{ \
{ K00, KC_NO, KC_NO, KC_NO }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 }, \
{ K30, K31, K32, KC_NO }, \
{ K40, K41, K42, K43 }, \
{ K50, KC_NO, K52, KC_NO } \
}

111
keyboards/kmac_pad/matrix.c Normal file
View file

@ -0,0 +1,111 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "wait.h"
#include "matrix.h"
#include "quantum.h"
static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* Columns 0 - 3
* col / pin:
* 0: C7
* 1: C6
* 2: B6
* 3: B5
*/
static void unselect_cols(void) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
setPinOutput(col_pins[col]);
writePinLow(col_pins[col]);
}
}
static void select_col(uint8_t col) {
writePinHigh(col_pins[col]);
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// row:0 , col:0 FN key is DIRECT_PIN
if (current_col == 0) {
matrix_row_t last_row_value = current_matrix[0];
if (readPin(row_pins[0]) == 0) {
// Pin LO, set col bit
current_matrix[0] |= (1 << current_col);
} else {
// Pin HI, clear col bit
current_matrix[0] &= ~(1 << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[0]) && !(matrix_changed)) {
matrix_changed = true;
}
}
// other row use MATRIX
for (uint8_t row_index = 1; row_index < MATRIX_ROWS; row_index++) {
matrix_row_t last_row_value = current_matrix[row_index];
if (readPin(row_pins[row_index]) == 0) {
// Pin HI, clear col bit
current_matrix[row_index] &= ~(1 << current_col);
} else {
// Pin LO, set col bit
current_matrix[row_index] |= (1 << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
matrix_changed = true;
}
}
// Unselect cols
unselect_cols();
return matrix_changed;
}
void matrix_init_custom(void) {
// initialize hardware and global matrix state here
unselect_cols();
// initialize key pins
for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
setPinInputHigh(row_pins[row_index]);
}
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
changed |= read_rows_on_col(current_matrix, current_col);
}
return changed;
}

View file

@ -0,0 +1,56 @@
# KMAC PAD
![kmac_pad](https://i.imgur.com/4P1ybgNl.jpg)
KMAC PAD is a num pad keyboard.
It can be used independently, but can also be used by connecting with KMAC keyboard case.
* Keyboard Maintainer: [talsu](https://github.com/talsu)
* Hardware Supported: KMAC PAD
* Hardware Availability: http://www.kbdmania.net/xe/news/5232321
Make example for this keyboard (after setting up your build environment):
make kmac_pad:default
Flashing example for this keyboard:
make kmac_pad:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
The PCB is hardwired to run the bootloader if the key at the `FN` position (the only key in first row) is held down when connecting the keyboard.
## PCB
![Imgur](https://i.imgur.com/ML66cvfl.jpg)
![Imgur](https://i.imgur.com/Kr2Wdtkl.jpg)
### Switch Pins
The FN key in the `Row 0` is directly connected to the E2 pin.
The rest of the rows below that use MATRIX. (`Row 1 ~ Row 5`)
| Row | Pin |
|:-----:| ---------------------- |
| 0 | x (Not in Matrix) |
| 1 | D0 |
| 2 | D1 |
| 3 | D2 |
| 4 | D3 |
| 5 | D5 |
| Column | Pin |
|:------:| --------------------- |
| 0 | C7 |
| 1 | C6 |
| 2 | B6 |
| 3 | B5 |
### Backlight Pins
There are 2 pins for backlight.
The LED of the FN key uses pin `B3`.
All other keys are connected to the `B1` pin.

View file

@ -0,0 +1,29 @@
# MCU name
MCU = atmega32u4
# Processor frequency
F_CPU = 8000000
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite # Custom matrix file
# Project specific files
SRC += matrix.c

61
keyboards/mb44/config.h Normal file
View file

@ -0,0 +1,61 @@
/*
Copyright 2021 melonbred
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6d62
#define PRODUCT_ID 0x6d62
#define DEVICE_VER 0x0001
#define MANUFACTURER melonbred
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D1, D6, D5, D4 }
#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, B2, B1, B0 }
#define UNUSED_PINS { C2 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*Encoder Definition*/
#define ENCODERS_PAD_A { D3 }
#define ENCODERS_PAD_B { D2 }
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

202
keyboards/mb44/info.json Normal file
View file

@ -0,0 +1,202 @@
{
"keyboard_name": "MB-44",
"url": "",
"maintainer": "melonbred",
"width": 3,
"height": 2,
"layouts": {
"LAYOUT_default": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":3, "y":3, "w":6.25},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_2u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":2.25},
{"x":5.5, "y":3},
{"x":6.5, "y":3, "w":2.75},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_2u1u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":2.75},
{"x":6, "y":3, "w":2.25},
{"x":8.25, "y":3},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_3u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":3},
{"x":6.25, "y":3, "w":3},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
}
}
}

View file

@ -0,0 +1,59 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_2u1u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_RALT, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_2u1u_space(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, XXXXXXX, KC_RALT, KC_SPC, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_2u1u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,59 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_2u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_2u_space(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC, KC_RALT, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_2u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,67 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2,
_LAYER3
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_3u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), LT(_LAYER3, KC_SPC), KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_3u_space(
KC_GRV, KC_QUOT, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
XXXXXXX, KC_LGUI, KC_LALT, _______, XXXXXXX, KC_0, KC_PDOT, KC_PEQL
),
[_LAYER2] = LAYOUT_3u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL, KC_VOLD,
XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
[_LAYER3] = LAYOUT_3u_space(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS,
XXXXXXX, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, _______,
_______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
_______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,61 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_default(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_default(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, _______, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_default(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_RALT, KC_RCTL
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,58 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2,
_LAYER3
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_default(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_LEFT, KC_RGHT, KC_DOWN
),
[_LAYER1] = LAYOUT_default(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, _______, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_default(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_RALT, KC_RCTL
),
[_LAYER3] = LAYOUT_default(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______
),
};

View file

@ -0,0 +1 @@
VIA_ENABLE = yes

17
keyboards/mb44/mb44.c Normal file
View file

@ -0,0 +1,17 @@
/* Copyright 2021 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "mb44.h"

84
keyboards/mb44/mb44.h Normal file
View file

@ -0,0 +1,84 @@
/* Copyright 2021 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define XXX KC_NO
#define LAYOUT_default( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K35, K39, K3A, K3B \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
{ K30, K31, K32, XXX, XXX, K35, XXX, XXX, XXX, K39, K3A, K3B } \
}
#define LAYOUT_2u_space( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K36, K37, K39, K3A, K3B \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
{ K30, K31, K32, K33, XXX, XXX, K36, K37, XXX, K39, K3A, K3B } \
}
#define LAYOUT_2u1u_space( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K35, K36, K39, K3A, K3B \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
{ K30, K31, K32, K33, XXX, K35, K36, XXX, XXX, K39, K3A, K3B } \
}
#define LAYOUT_3u_space( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K36, K39, K3A, K3B \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
{ K30, K31, K32, K33, XXX, XXX, K36, XXX, XXX, K39, K3A, K3B } \
}

15
keyboards/mb44/readme.md Normal file
View file

@ -0,0 +1,15 @@
# MB-44
![MB-44](https://imgur.com/sECiIHR.jpg)
To reset and put into bootloader mode, please use the hardware reset button on the botton of the PCB. If the PCB is on the default firmware, software reset is available by holding the bottom left corner key and pressing `B` in the standard qwerty layout.
* Keyboard Maintainer: [melonbred](https://github.com/melonbred)
* Hardware Supported: The PCBs, controllers supported
* Hardware Availability: Links to where you can find this hardware
Make example for this keyboard (after setting up your build environment):
make mb44:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

23
keyboards/mb44/rules.mk Normal file
View file

@ -0,0 +1,23 @@
# MCU name
MCU = atmega32u2
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes # Enable rotary encoder

View file

@ -28,3 +28,4 @@ MIDI_ENABLE = no # MIDI controls
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
RGBLIGHT_ENABLE = yes # Enable support for RGB LEDs