Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

More work on ErgoDox EZ default keymap

Browse source
This commit is contained in:
Erez Zukerman 2015-10-28 04:07:15 +02:00
parent 2739aa8d78
commit d3db8d62f6
9 changed files with 28 additions and 104 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
keyboard/ergodox_ez/Makefile
View file

@ -27,7 +27,8 @@ TARGET_DIR = .
# # project specific files
SRC = ergodox_ez.c \
twimaster.c
twimaster.c \
matrix.c
ifdef KEYMAP
SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
@ -84,17 +85,18 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA

2
keyboard/ergodox_ez/config.h
View file

@ -52,7 +52,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 2
#define TAPPING_TERM 100
#define TAPPING_TERM 200
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

29
keyboard/ergodox_ez/ergodox_ez.c
View file

@ -4,10 +4,6 @@
bool i2c_initialized = 0;
uint8_t mcp23018_status = 0x20;
bool ergodox_left_led_1 = 0; // left top
bool ergodox_left_led_2 = 0; // left middle
bool ergodox_left_led_3 = 0; // left bottom
__attribute__ ((weak))
void * matrix_init_user(void) {
@ -92,32 +88,7 @@ uint8_t init_mcp23018(void) {
out:
i2c_stop();
if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
return mcp23018_status;
}
uint8_t ergodox_left_leds_update(void) {
if (mcp23018_status) { // if there was an error
return mcp23018_status;
}
// set logical value (doesn't matter on inputs)
// - unused : hi-Z : 1
// - input : hi-Z : 1
// - driving : hi-Z : 1
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(OLATA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111
& ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
& ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT)
); if (mcp23018_status) goto out;
out:
i2c_stop();
return mcp23018_status;
}

21
keyboard/ergodox_ez/ergodox_ez.h
View file

@ -37,29 +37,16 @@ uint8_t ergodox_left_leds_update(void);
#define LED_BRIGHTNESS_LO 31
#define LED_BRIGHTNESS_HI 255
#define LEFT_LED_1_SHIFT 7 // in MCP23018 port B
#define LEFT_LED_2_SHIFT 6 // in MCP23018 port B
#define LEFT_LED_3_SHIFT 7 // in MCP23018 port A
extern bool ergodox_left_led_1; // left top
extern bool ergodox_left_led_2; // left middle
extern bool ergodox_left_led_3; // left bottom
inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); }
inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); }
inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); }
inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); }
inline void ergodox_left_led_1_on(void) { ergodox_left_led_1 = 1; }
inline void ergodox_left_led_2_on(void) { ergodox_left_led_2 = 1; }
inline void ergodox_left_led_3_on(void) { ergodox_left_led_3 = 1; }
inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); }
inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); }
inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); }
inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); }
inline void ergodox_left_led_1_off(void) { ergodox_left_led_1 = 0; }
inline void ergodox_left_led_2_off(void) { ergodox_left_led_2 = 0; }
inline void ergodox_left_led_3_off(void) { ergodox_left_led_3 = 0; }
inline void ergodox_led_all_on(void)
{
@ -67,10 +54,6 @@ inline void ergodox_led_all_on(void)
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
ergodox_left_led_1_on();
ergodox_left_led_2_on();
ergodox_left_led_3_on();
ergodox_left_leds_update();
}
inline void ergodox_led_all_off(void)
@ -79,10 +62,6 @@ inline void ergodox_led_all_off(void)
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
ergodox_left_led_1_off();
ergodox_left_led_2_off();
ergodox_left_led_3_off();
ergodox_left_leds_update();
}
inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; }

BIN
keyboard/ergodox_ez/ergodox_ez.hex
View file

Binary file not shown.

46
keyboard/ergodox_ez/keymaps/keymap_default.c
View file

@ -46,15 +46,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_COLN,KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT,
TG(1), KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT,
KC_UP, KC_DOWN,KC_RBRC,KC_LBRC, KC_FN1,
KC_RALT, CTL_T(KC_ESC),
KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
KC_LALT, CTL_T(KC_ESC),
KC_PGUP,
KC_PGDN,KC_TAB, KC_ENT
),
/* Keymap 1: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | Flash | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// SYMBOLS
[SYMB] = KEYMAP(
// left hand
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
KC_COLN,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
@ -162,50 +162,24 @@ void * matrix_init_user(void) {
// Runs constantly in the background, in a loop.
void * matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_left_led_1_off();
ergodox_left_led_2_off();
ergodox_left_led_3_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
// all
ergodox_left_led_1_on();
ergodox_left_led_2_on();
ergodox_left_led_3_on();
ergodox_right_led_1_on();
break;
case 2:
// blue
ergodox_left_led_2_on();
break;
case 8:
// blue and green
ergodox_left_led_2_on();
// break missed intentionally
case 3:
// green
ergodox_left_led_3_on();
break;
case 6:
ergodox_board_led_on();
// break missed intentionally
case 4:
case 5:
case 7:
// white
ergodox_left_led_1_on();
break;
case 9:
// white+green
ergodox_left_led_1_on();
ergodox_left_led_3_on();
ergodox_right_led_2_on();
break;
default:
// none
break;
}
mcp23018_status = ergodox_left_leds_update();
};

4
keyboard/ergodox_ez/matrix.c
View file

@ -277,7 +277,7 @@ static void unselect_rows(void)
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write( 0xFF
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
& ~(0<<7)
); if (mcp23018_status) goto out;
out:
i2c_stop();
@ -305,7 +305,7 @@ static void select_row(uint8_t row)
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write( 0xFF & ~(1<<row)
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
& ~(0<<7)
); if (mcp23018_status) goto out;
out:
i2c_stop();

7
quantum/keymap_common.c
View file

@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "report.h"
#include "keycode.h"
#include "action_layer.h"
#include <util/delay.h>
#include "action.h"
#include "action_macro.h"
#include "debug.h"
@ -71,6 +72,8 @@ action_t action_for_key(uint8_t layer, keypos_t key)
return action;
#endif
} else if (keycode == RESET) { // RESET is 0x5000, which is why this is here
clear_keyboard();
_delay_ms(250);
bootloader_jump();
return;
} else if (keycode == DEBUG) { // DEBUG is 0x5001
@ -78,7 +81,7 @@ action_t action_for_key(uint8_t layer, keypos_t key)
print("\nDEBUG: enabled.\n");
debug_enable = true;
return;
} else if (keycode >= 0x5000 && keycode < 0x6000) {
} else if (keycode >= 0x5000 && keycode < 0x6000) {
// Layer movement shortcuts
// See .h to see constraints/usage
int type = (keycode >> 0x8) & 0xF;
@ -107,7 +110,7 @@ action_t action_for_key(uint8_t layer, keypos_t key)
action_t action;
action.code = ACTION_LAYER_TOGGLE(layer);
return action;
}
}
#ifdef MIDI_ENABLE
} else if (keycode >= 0x6000 && keycode < 0x7000) {
action_t action;

7
quantum/keymap_common.h
View file

@ -190,12 +190,7 @@ extern const uint16_t fn_actions[];
#define GUI_T(kc) MT(0x8, kc)
// L-ayer, T-ap - 256 keycode max, 16 layer max
#define LT(layer, kc) (kc | 0x7000 | ((layer & 0xF) << 8))
// For sending unicode codes.
// You may not send codes over 1FFF -- this supports most of UTF8.
// To have a key that sends out Œ, go UC(0x0152)
#define UNICODE(n) (n | 0x8000)
#define LT(layer, kc) (kc | 0x8000 | ((layer & 0xF) << 8))
#define UC(n) UNICODE(n)