Nebula12 RGBLIGHT buffer workaround (#10555)
* Work around for rgblight buffer * Update config.h * Prettify * Clip led range
This commit is contained in:
yiancar
GitHub
parent
f952d4f7b7
commit
d49dcdd667
7 changed files with 14 additions and 1919 deletions
|
|
@ -1,268 +0,0 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
#include "stm32_gpio.h"
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local definitions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver exported variables. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local variables and types. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Type of STM32 GPIO port setup.
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t moder;
|
||||
uint32_t otyper;
|
||||
uint32_t ospeedr;
|
||||
uint32_t pupdr;
|
||||
uint32_t odr;
|
||||
uint32_t afrl;
|
||||
uint32_t afrh;
|
||||
} gpio_setup_t;
|
||||
|
||||
/**
|
||||
* @brief Type of STM32 GPIO initialization data.
|
||||
*/
|
||||
typedef struct {
|
||||
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
|
||||
gpio_setup_t PAData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
|
||||
gpio_setup_t PBData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
|
||||
gpio_setup_t PCData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
|
||||
gpio_setup_t PDData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
|
||||
gpio_setup_t PEData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
|
||||
gpio_setup_t PFData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
|
||||
gpio_setup_t PGData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
|
||||
gpio_setup_t PHData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
|
||||
gpio_setup_t PIData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
|
||||
gpio_setup_t PJData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
|
||||
gpio_setup_t PKData;
|
||||
#endif
|
||||
} gpio_config_t;
|
||||
|
||||
/**
|
||||
* @brief STM32 GPIO static initialization data.
|
||||
*/
|
||||
static const gpio_config_t gpio_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ
|
||||
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
|
||||
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK
|
||||
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
|
||||
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
|
||||
#endif
|
||||
};
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
|
||||
|
||||
gpiop->OTYPER = config->otyper;
|
||||
gpiop->OSPEEDR = config->ospeedr;
|
||||
gpiop->PUPDR = config->pupdr;
|
||||
gpiop->ODR = config->odr;
|
||||
gpiop->AFRL = config->afrl;
|
||||
gpiop->AFRH = config->afrh;
|
||||
gpiop->MODER = config->moder;
|
||||
}
|
||||
|
||||
static void stm32_gpio_init(void) {
|
||||
|
||||
/* Enabling GPIO-related clocks, the mask comes from the
|
||||
registry header file.*/
|
||||
rccResetAHB(STM32_GPIO_EN_MASK);
|
||||
rccEnableAHB(STM32_GPIO_EN_MASK, true);
|
||||
|
||||
/* Initializing all the defined GPIO ports.*/
|
||||
#if STM32_HAS_GPIOA
|
||||
gpio_init(GPIOA, &gpio_default_config.PAData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
gpio_init(GPIOB, &gpio_default_config.PBData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
gpio_init(GPIOC, &gpio_default_config.PCData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
gpio_init(GPIOD, &gpio_default_config.PDData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
gpio_init(GPIOE, &gpio_default_config.PEData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
gpio_init(GPIOF, &gpio_default_config.PFData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
gpio_init(GPIOG, &gpio_default_config.PGData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
gpio_init(GPIOH, &gpio_default_config.PHData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
gpio_init(GPIOI, &gpio_default_config.PIData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ
|
||||
gpio_init(GPIOJ, &gpio_default_config.PJData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK
|
||||
gpio_init(GPIOK, &gpio_default_config.PKData);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver interrupt handlers. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver exported functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details GPIO ports and system clocks are initialized before everything
|
||||
* else.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
extern void enter_bootloader_mode_if_requested(void);
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_gpio_init();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
|
||||
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
|
||||
}
|
||||
|
|
@ -1,940 +0,0 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver constants. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*
|
||||
* Setup for ST STM32F072B-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_ST_STM32F072B_DISCOVERY
|
||||
#define BOARD_NAME "ST STM32F072B-Discovery"
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: HSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define STM32F072xB
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_USB_DM 11U
|
||||
#define GPIOA_USB_DP 12U
|
||||
#define GPIOA_SWDIO 13U
|
||||
#define GPIOA_SWCLK 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_SPI2_SCK 13U
|
||||
#define GPIOB_SPI2_MISO 14U
|
||||
#define GPIOB_SPI2_MOSI 15U
|
||||
|
||||
#define GPIOC_MEMS_CS 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_LED_RED 6U
|
||||
#define GPIOC_LED_BLUE 7U
|
||||
#define GPIOC_LED_ORANGE 8U
|
||||
#define GPIOC_LED_GREEN 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_OSC32_IN 14U
|
||||
#define GPIOC_OSC32_OUT 15U
|
||||
|
||||
#define GPIOD_PIN0 0U
|
||||
#define GPIOD_PIN1 1U
|
||||
#define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
#define GPIOD_PIN12 12U
|
||||
#define GPIOD_PIN13 13U
|
||||
#define GPIOD_PIN14 14U
|
||||
#define GPIOD_PIN15 15U
|
||||
|
||||
#define GPIOE_PIN0 0U
|
||||
#define GPIOE_PIN1 1U
|
||||
#define GPIOE_PIN2 2U
|
||||
#define GPIOE_PIN3 3U
|
||||
#define GPIOE_PIN4 4U
|
||||
#define GPIOE_PIN5 5U
|
||||
#define GPIOE_PIN6 6U
|
||||
#define GPIOE_PIN7 7U
|
||||
#define GPIOE_PIN8 8U
|
||||
#define GPIOE_PIN9 9U
|
||||
#define GPIOE_PIN10 10U
|
||||
#define GPIOE_PIN11 11U
|
||||
#define GPIOE_PIN12 12U
|
||||
#define GPIOE_PIN13 13U
|
||||
#define GPIOE_PIN14 14U
|
||||
#define GPIOE_PIN15 15U
|
||||
|
||||
#define GPIOF_OSC_IN 0U
|
||||
#define GPIOF_OSC_OUT 1U
|
||||
#define GPIOF_PIN2 2U
|
||||
#define GPIOF_PIN3 3U
|
||||
#define GPIOF_PIN4 4U
|
||||
#define GPIOF_PIN5 5U
|
||||
#define GPIOF_PIN6 6U
|
||||
#define GPIOF_PIN7 7U
|
||||
#define GPIOF_PIN8 8U
|
||||
#define GPIOF_PIN9 9U
|
||||
#define GPIOF_PIN10 10U
|
||||
#define GPIOF_PIN11 11U
|
||||
#define GPIOF_PIN12 12U
|
||||
#define GPIOF_PIN13 13U
|
||||
#define GPIOF_PIN14 14U
|
||||
#define GPIOF_PIN15 15U
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
|
||||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
|
||||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
|
||||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
|
||||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
|
||||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
|
||||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
|
||||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
|
||||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
|
||||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
|
||||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
|
||||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
|
||||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
|
||||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver pre-compile time settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Derived constants and error checks. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver data structures and types. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver macros. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - BUTTON (input floating).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA10 - PIN10 (input pullup).
|
||||
* PA11 - USB_DM (input floating).
|
||||
* PA12 - USB_DP (input floating).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DM) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DP) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
|
||||
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DM) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DP) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN7, 0U))
|
||||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - SPI2_SCK (alternate 0).
|
||||
* PB14 - SPI2_MISO (alternate 0).
|
||||
* PB15 - SPI2_MOSI (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN7, 0U))
|
||||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - MEMS_CS (output pushpull maximum).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - LED_RED (output pushpull maximum).
|
||||
* PC7 - LED_BLUE (output pushpull maximum).
|
||||
* PC8 - LED_ORANGE (output pushpull maximum).
|
||||
* PC9 - LED_GREEN (output pushpull maximum).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - OSC32_IN (input floating).
|
||||
* PC15 - OSC32_OUT (input floating).
|
||||
*/
|
||||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN5) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN5) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_RED) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
|
||||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD10 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN7, 0U))
|
||||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*
|
||||
* PE0 - PIN0 (input pullup).
|
||||
* PE1 - PIN1 (input pullup).
|
||||
* PE2 - PIN2 (input pullup).
|
||||
* PE3 - PIN3 (input pullup).
|
||||
* PE4 - PIN4 (input pullup).
|
||||
* PE5 - PIN5 (input pullup).
|
||||
* PE6 - PIN6 (input pullup).
|
||||
* PE7 - PIN7 (input pullup).
|
||||
* PE8 - PIN8 (input pullup).
|
||||
* PE9 - PIN9 (input pullup).
|
||||
* PE10 - PIN10 (input pullup).
|
||||
* PE11 - PIN11 (input pullup).
|
||||
* PE12 - PIN12 (input pullup).
|
||||
* PE13 - PIN13 (input pullup).
|
||||
* PE14 - PIN14 (input pullup).
|
||||
* PE15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN7, 0U))
|
||||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*
|
||||
* PF0 - OSC_IN (input floating).
|
||||
* PF1 - OSC_OUT (input floating).
|
||||
* PF2 - PIN2 (input pullup).
|
||||
* PF3 - PIN3 (input pullup).
|
||||
* PF4 - PIN4 (input pullup).
|
||||
* PF5 - PIN5 (input pullup).
|
||||
* PF6 - PIN6 (input pullup).
|
||||
* PF7 - PIN7 (input pullup).
|
||||
* PF8 - PIN8 (input pullup).
|
||||
* PF9 - PIN9 (input pullup).
|
||||
* PF10 - PIN10 (input pullup).
|
||||
* PF11 - PIN11 (input pullup).
|
||||
* PF12 - PIN12 (input pullup).
|
||||
* PF13 - PIN13 (input pullup).
|
||||
* PF14 - PIN14 (input pullup).
|
||||
* PF15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
|
||||
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
|
||||
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN7, 0U))
|
||||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN15, 0U))
|
||||
|
||||
/*===========================================================================*/
|
||||
/* External declarations. */
|
||||
/*===========================================================================*/
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* BOARD_H */
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY
|
||||
|
|
@ -1,703 +0,0 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!-- STM32F0xx board Template -->
|
||||
<board
|
||||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
|
||||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
|
||||
<configuration_settings>
|
||||
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
|
||||
<output_path>..</output_path>
|
||||
<hal_version>3.0.x</hal_version>
|
||||
</configuration_settings>
|
||||
<board_name>ST STM32F072B-Discovery</board_name>
|
||||
<board_id>ST_STM32F072B_DISCOVERY</board_id>
|
||||
<board_functions></board_functions>
|
||||
<subtype>STM32F072xB</subtype>
|
||||
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
|
||||
LSEBypass="false" LSEDrive="3 High Drive (default)" />
|
||||
<ports>
|
||||
<GPIOA>
|
||||
<pin0
|
||||
ID="BUTTON"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID="USB_DM"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID="USB_DP"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SWDIO"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SWCLK"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullDown"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOA>
|
||||
<GPIOB>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SPI2_SCK"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SPI2_MISO"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="SPI2_MOSI"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
</GPIOB>
|
||||
<GPIOC>
|
||||
<pin0
|
||||
ID="MEMS_CS"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID="LED_RED"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID="LED_BLUE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID="LED_ORANGE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" ></pin8>
|
||||
<pin9
|
||||
ID="LED_GREEN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="OSC32_IN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="OSC32_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOC>
|
||||
<GPIOD>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOD>
|
||||
<GPIOE>
|
||||
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOE>
|
||||
<GPIOF>
|
||||
<pin0
|
||||
ID="OSC_IN"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID="OSC_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOF>
|
||||
</ports>
|
||||
</board>
|
||||
|
|
@ -41,6 +41,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Ensure we jump to bootloader if the RESET keycode was pressed */
|
||||
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
|
||||
/* Setting up 400KHz I2C Clock for a 48MHz system clock */
|
||||
#define I2C1_SCL_PAL_MODE 1
|
||||
#define I2C1_SDA_PAL_MODE 1
|
||||
|
|
@ -95,12 +98,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define RGB_DI_PIN B15
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 4
|
||||
#define RGBLED_NUM 10 /* If number is smaller, buffer updates too fast causing glitches */
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -18,3 +18,12 @@
|
|||
#endif
|
||||
|
||||
#include "nebula12.h"
|
||||
|
||||
void board_init(void) {
|
||||
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
|
||||
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
|
||||
}
|
||||
|
||||
void keyboard_post_init_user(void) {
|
||||
rgblight_set_effect_range(0, 4);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
# MCU name
|
||||
MCU = STM32F072
|
||||
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
BOARD = GENERIC_STM32_F072XB
|
||||
|
||||
# Do not put the microcontroller into power saving mode
|
||||
# when we get USB suspend event. We want it to keep updating
|
||||
|
|
|
|||
Loading…
Reference in a new issue