1
0
Fork 0

Cleans up quantum/keymap situation, removes extra lufa folders (#416)

* sorts out keycodes

* move midi around

* remove mbed

* replaces keymap with qmk/keymap_common

* fixes keymap.h

* keymap, config, quantum rearrange

* removes unneeded lufa stuff
This commit is contained in:
Jack Humbert 2016-06-18 14:30:24 -04:00 committed by GitHub
parent 1923cffd41
commit db32864ce7
5186 changed files with 780 additions and 2298517 deletions

View file

@ -80,7 +80,8 @@ endif
SRC += $(KEYBOARD_FILE) \ SRC += $(KEYBOARD_FILE) \
$(KEYMAP_FILE) \ $(KEYMAP_FILE) \
$(QUANTUM_DIR)/quantum.c \ $(QUANTUM_DIR)/quantum.c \
$(QUANTUM_DIR)/keymap_common.c \ $(QUANTUM_DIR)/keymap.c \
$(QUANTUM_DIR)/keycode_config.c \
$(QUANTUM_DIR)/led.c $(QUANTUM_DIR)/led.c
ifndef CUSTOM_MATRIX ifndef CUSTOM_MATRIX

View file

@ -2,7 +2,7 @@
#define ARROW_PAD_H #define ARROW_PAD_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#ifdef BACKLIGHT_ENABLE #ifdef BACKLIGHT_ENABLE
#include "backlight.h" #include "backlight.h"
#endif #endif

View file

@ -2,7 +2,7 @@
#define ATREUS_H #define ATREUS_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include "backlight.h" #include "backlight.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define BANTAM44_H #define BANTAM44_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include "backlight.h" #include "backlight.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define CLUEBOARD1_H #define CLUEBOARD1_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define CLUEBOARD2_H #define CLUEBOARD2_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define CLUEPAD_H #define CLUEPAD_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include <stddef.h> #include <stddef.h>

View file

@ -1,6 +1,6 @@
#include "ergodox_ez.h" #include "ergodox_ez.h"
#include "action_layer.h" #include "action_layer.h"
#include "keymap_common.h" #include "keymap.h"
#include "keymap_extras/keymap_german.h" #include "keymap_extras/keymap_german.h"
#define UC_ASYMPTOTICALLY_EQUAL_TO 0 #define UC_ASYMPTOTICALLY_EQUAL_TO 0

View file

@ -3,7 +3,7 @@
#include "action_layer.h" #include "action_layer.h"
#include "action_util.h" #include "action_util.h"
#include "led.h" #include "led.h"
#include "keymap_common.h" #include "keymap.h"
#include "timer.h" #include "timer.h"
/* /*

View file

@ -2,7 +2,7 @@
#define GH60_H #define GH60_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include "backlight.h" #include "backlight.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define HHKB_H #define HHKB_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
//#include "backlight.h" //#include "backlight.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define JD45_H #define JD45_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include "backlight.h" #include "backlight.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define KC60_H #define KC60_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#ifdef BACKLIGHT_ENABLE #ifdef BACKLIGHT_ENABLE
#include "backlight.h" #include "backlight.h"
#endif #endif

View file

@ -2,7 +2,7 @@
#define PHANTOM_H #define PHANTOM_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include <stddef.h> #include <stddef.h>

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
#include "planck.h" #include "planck.h"
#include "backlight.h" #include "backlight.h"

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Native */ [0] = { /* Native */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
#include "keymap_colemak.h" #include "keymap_colemak.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* BASE */ [0] = { /* BASE */

View file

@ -8,7 +8,7 @@ The "Gaming" layer is mainly customized for CS:GO.
If you have any question about this keymap feel free to shoot me a message on reddit! If you have any question about this keymap feel free to shoot me a message on reddit!
*/ */
#include "keymap_common.h" #include "keymap.h"
#include "keymap_extras/keymap_german.h" #include "keymap_extras/keymap_german.h"
#include "backlight.h" #include "backlight.h"
#include "debug.h" #include "debug.h"

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */ [0] = { /* Qwerty */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( [0] = KEYMAP(

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( [0] = KEYMAP(

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Jack */ [0] = KEYMAP( /* Jack */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Joe qwerty */ [0] = KEYMAP( /* Joe qwerty */

View file

@ -20,7 +20,7 @@
`-----------------------------------------------------------------------------------------------' `-----------------------------------------------------------------------------------------------'
*/ */
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: dvorak */ /* 0: dvorak */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( [0] = KEYMAP(

View file

@ -1,7 +1,7 @@
// Author: Nathan Ross Powell <nathanrospowell@gmail.com> // Author: Nathan Ross Powell <nathanrospowell@gmail.com>
// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c // https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: main layer /* 0: main layer

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Paul */ [0] = KEYMAP( /* Paul */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Native */ [0] = KEYMAP( /* Native */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
/* /*
* BUILD: * BUILD:

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Matrix Dvorak */ [0] = KEYMAP( /* Matrix Dvorak */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
#include "action_layer.h" #include "action_layer.h"
#include "action.h" #include "action.h"
#include "action_util.h" #include "action_util.h"

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Jack */ [0] = KEYMAP( /* Jack */

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( [0] = KEYMAP(

View file

@ -1,4 +1,4 @@
#include "keymap_common.h" #include "keymap.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Wilba */ [0] = KEYMAP( /* Wilba */

View file

@ -14,7 +14,7 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#include "keymap_common.h" #include "keymap.h"
/* translates key to keycode */ /* translates key to keycode */

View file

@ -2,7 +2,7 @@
#define RETRO_REFIT_H #define RETRO_REFIT_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include "led.h" #include "led.h"
#include <stddef.h> #include <stddef.h>

View file

@ -2,7 +2,7 @@
#define SATAN_H #define SATAN_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#include <stddef.h> #include <stddef.h>

View file

@ -6,7 +6,7 @@
#include <avr/io.h> #include <avr/io.h>
#include "print.h" #include "print.h"
#include "audio.h" #include "audio.h"
#include "keymap_common.h" #include "keymap.h"
#include "eeconfig.h" #include "eeconfig.h"

View file

@ -6,7 +6,7 @@
#include <avr/io.h> #include <avr/io.h>
#include "print.h" #include "print.h"
#include "audio.h" #include "audio.h"
#include "keymap_common.h" #include "keymap.h"
#include "eeconfig.h" #include "eeconfig.h"

74
quantum/keycode_config.c Normal file
View file

@ -0,0 +1,74 @@
#include "keycode_config.h"
extern keymap_config_t keymap_config;
uint16_t keycode_config(uint16_t keycode) {
switch (keycode) {
case KC_CAPSLOCK:
case KC_LOCKING_CAPS:
if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
return KC_LCTL;
}
return keycode;
case KC_LCTL:
if (keymap_config.swap_control_capslock) {
return KC_CAPSLOCK;
}
return KC_LCTL;
case KC_LALT:
if (keymap_config.swap_lalt_lgui) {
if (keymap_config.no_gui) {
return KC_NO;
}
return KC_LGUI;
}
return KC_LALT;
case KC_LGUI:
if (keymap_config.swap_lalt_lgui) {
return KC_LALT;
}
if (keymap_config.no_gui) {
return KC_NO;
}
return KC_LGUI;
case KC_RALT:
if (keymap_config.swap_ralt_rgui) {
if (keymap_config.no_gui) {
return KC_NO;
}
return KC_RGUI;
}
return KC_RALT;
case KC_RGUI:
if (keymap_config.swap_ralt_rgui) {
return KC_RALT;
}
if (keymap_config.no_gui) {
return KC_NO;
}
return KC_RGUI;
case KC_GRAVE:
if (keymap_config.swap_grave_esc) {
return KC_ESC;
}
return KC_GRAVE;
case KC_ESC:
if (keymap_config.swap_grave_esc) {
return KC_GRAVE;
}
return KC_ESC;
case KC_BSLASH:
if (keymap_config.swap_backslash_backspace) {
return KC_BSPACE;
}
return KC_BSLASH;
case KC_BSPACE:
if (keymap_config.swap_backslash_backspace) {
return KC_BSLASH;
}
return KC_BSPACE;
default:
return keycode;
}
}

21
quantum/keycode_config.h Normal file
View file

@ -0,0 +1,21 @@
#include "eeconfig.h"
#include "keycode.h"
uint16_t keycode_config(uint16_t keycode);
/* NOTE: Not portable. Bit field order depends on implementation */
typedef union {
uint16_t raw;
struct {
bool swap_control_capslock:1;
bool capslock_to_control:1;
bool swap_lalt_lgui:1;
bool swap_ralt_rgui:1;
bool no_gui:1;
bool swap_grave_esc:1;
bool swap_backslash_backspace:1;
bool nkro:1;
};
} keymap_config_t;
keymap_config_t keymap_config;

163
quantum/keymap.c Normal file
View file

@ -0,0 +1,163 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap.h"
#include "report.h"
#include "keycode.h"
#include "action_layer.h"
#include <util/delay.h>
#include "action.h"
#include "action_macro.h"
#include "debug.h"
#include "backlight.h"
#include "quantum.h"
#ifdef MIDI_ENABLE
#include "keymap_midi.h"
#endif
extern keymap_config_t keymap_config;
#include <stdio.h>
#include <inttypes.h>
/* converts key to action */
action_t action_for_key(uint8_t layer, keypos_t key)
{
// 16bit keycodes - important
uint16_t keycode = keymap_key_to_keycode(layer, key);
// keycode remapping
keycode = keycode_config(keycode);
action_t action;
uint8_t action_layer, when, mod;
switch (keycode) {
case KC_FN0 ... KC_FN31:
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
break;
case KC_A ... KC_EXSEL:
case KC_LCTRL ... KC_RGUI:
action.code = ACTION_KEY(keycode);
break;
case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
break;
case KC_AUDIO_MUTE ... KC_WWW_FAVORITES:
action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
break;
case KC_MS_UP ... KC_MS_ACCEL2:
action.code = ACTION_MOUSEKEY(keycode);
break;
case KC_TRNS:
action.code = ACTION_TRANSPARENT;
break;
case QK_MODS ... QK_MODS_MAX: ;
// Has a modifier
// Split it up
action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); // adds modifier to key
break;
case QK_FUNCTION ... QK_FUNCTION_MAX: ;
// Is a shortcut for function action_layer, pull last 12bits
// This means we have 4,096 FN macros at our disposal
action.code = pgm_read_word(&fn_actions[(int)keycode & 0xFFF]);
break;
case QK_MACRO ... QK_MACRO_MAX:
action.code = ACTION_MACRO(keycode & 0xFF);
break;
case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
action.code = ACTION_LAYER_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
break;
case QK_TO ... QK_TO_MAX: ;
// Layer set "GOTO"
when = (keycode >> 0x4) & 0x3;
action_layer = keycode & 0xF;
action.code = ACTION_LAYER_SET(action_layer, when);
break;
case QK_MOMENTARY ... QK_MOMENTARY_MAX: ;
// Momentary action_layer
action_layer = keycode & 0xFF;
action.code = ACTION_LAYER_MOMENTARY(action_layer);
break;
case QK_DEF_LAYER ... QK_DEF_LAYER_MAX: ;
// Set default action_layer
action_layer = keycode & 0xFF;
action.code = ACTION_DEFAULT_LAYER_SET(action_layer);
break;
case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX: ;
// Set toggle
action_layer = keycode & 0xFF;
action.code = ACTION_LAYER_TOGGLE(action_layer);
break;
case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX: ;
// OSL(action_layer) - One-shot action_layer
action_layer = keycode & 0xFF;
action.code = ACTION_LAYER_ONESHOT(action_layer);
break;
case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX: ;
// OSM(mod) - One-shot mod
mod = keycode & 0xFF;
action.code = ACTION_MODS_ONESHOT(mod);
break;
case QK_MOD_TAP ... QK_MOD_TAP_MAX:
action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
break;
#ifdef BACKLIGHT_ENABLE
case BL_0 ... BL_15:
action.code = ACTION_BACKLIGHT_LEVEL(keycode - BL_0);
break;
case BL_DEC:
action.code = ACTION_BACKLIGHT_DECREASE();
break;
case BL_INC:
action.code = ACTION_BACKLIGHT_INCREASE();
break;
case BL_TOGG:
action.code = ACTION_BACKLIGHT_TOGGLE();
break;
case BL_STEP:
action.code = ACTION_BACKLIGHT_STEP();
break;
#endif
default:
action.code = ACTION_NO;
break;
}
return action;
}
/* Macro */
__attribute__ ((weak))
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
return MACRO_NONE;
}
/* Function */
__attribute__ ((weak))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
// Read entire word (16bits)
return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
}

315
quantum/keymap.h Normal file
View file

@ -0,0 +1,315 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_H
#define KEYMAP_H
#include <stdint.h>
#include <stdbool.h>
#include "action.h"
#include <avr/pgmspace.h>
#include "keycode.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
// #include "print.h"
#include "debug.h"
#include "keycode_config.h"
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint16_t keycode);
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
enum quantum_keycodes {
// Ranges used in shortucuts - not to be used directly
QK_TMK = 0x0000,
QK_TMK_MAX = 0x00FF,
QK_MODS = 0x0100,
QK_LCTL = 0x0100,
QK_LSFT = 0x0200,
QK_LALT = 0x0400,
QK_LGUI = 0x0800,
QK_RCTL = 0x1100,
QK_RSFT = 0x1200,
QK_RALT = 0x1400,
QK_RGUI = 0x1800,
QK_MODS_MAX = 0x1FFF,
QK_FUNCTION = 0x2000,
QK_FUNCTION_MAX = 0x2FFF,
QK_MACRO = 0x3000,
QK_MACRO_MAX = 0x3FFF,
QK_LAYER_TAP = 0x4000,
QK_LAYER_TAP_MAX = 0x4FFF,
QK_TO = 0x5000,
QK_TO_MAX = 0x50FF,
QK_MOMENTARY = 0x5100,
QK_MOMENTARY_MAX = 0x51FF,
QK_DEF_LAYER = 0x5200,
QK_DEF_LAYER_MAX = 0x52FF,
QK_TOGGLE_LAYER = 0x5300,
QK_TOGGLE_LAYER_MAX = 0x53FF,
QK_ONE_SHOT_LAYER = 0x5400,
QK_ONE_SHOT_LAYER_MAX = 0x54FF,
QK_ONE_SHOT_MOD = 0x5500,
QK_ONE_SHOT_MOD_MAX = 0x55FF,
#ifndef DISABLE_CHORDING
QK_CHORDING = 0x5600,
QK_CHORDING_MAX = 0x56FF,
#endif
QK_MOD_TAP = 0x6000,
QK_MOD_TAP_MAX = 0x6FFF,
#ifdef UNICODE_ENABLE
QK_UNICODE = 0x8000,
QK_UNICODE_MAX = 0xFFFF,
#endif
// Loose keycodes - to be used directly
RESET = 0x7000,
DEBUG,
MAGIC_SWAP_CONTROL_CAPSLOCK,
MAGIC_CAPSLOCK_TO_CONTROL,
MAGIC_SWAP_LALT_LGUI,
MAGIC_SWAP_RALT_RGUI,
MAGIC_NO_GUI,
MAGIC_SWAP_GRAVE_ESC,
MAGIC_SWAP_BACKSLASH_BACKSPACE,
MAGIC_HOST_NKRO,
MAGIC_SWAP_ALT_GUI,
MAGIC_UNSWAP_CONTROL_CAPSLOCK,
MAGIC_UNCAPSLOCK_TO_CONTROL,
MAGIC_UNSWAP_LALT_LGUI,
MAGIC_UNSWAP_RALT_RGUI,
MAGIC_UNNO_GUI,
MAGIC_UNSWAP_GRAVE_ESC,
MAGIC_UNSWAP_BACKSLASH_BACKSPACE,
MAGIC_UNHOST_NKRO,
MAGIC_UNSWAP_ALT_GUI,
// Leader key
#ifndef DISABLE_LEADER
KC_LEAD,
#endif
// Audio on/off/toggle
AU_ON,
AU_OFF,
AU_TOG,
// Music mode on/off/toggle
MU_ON,
MU_OFF,
MU_TOG,
// Music voice iterate
MUV_IN,
MUV_DE,
// Midi mode on/off
MI_ON,
MI_OFF,
// Backlight functionality
BL_0,
BL_1,
BL_2,
BL_3,
BL_4,
BL_5,
BL_6,
BL_7,
BL_8,
BL_9,
BL_10,
BL_11,
BL_12,
BL_13,
BL_14,
BL_15,
BL_DEC,
BL_INC,
BL_TOGG,
BL_STEP,
// Left shift, open paren
KC_LSPO,
// Right shift, close paren
KC_RSPC,
};
// Ability to use mods in layouts
#define LCTL(kc) (kc | QK_LCTL)
#define LSFT(kc) (kc | QK_LSFT)
#define LALT(kc) (kc | QK_LALT)
#define LGUI(kc) (kc | QK_LGUI)
#define RCTL(kc) (kc | QK_RCTL)
#define RSFT(kc) (kc | QK_RSFT)
#define RALT(kc) (kc | QK_RALT)
#define RGUI(kc) (kc | QK_RGUI)
#define HYPR(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT | QK_LGUI)
#define MEH(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT)
#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI)
#define MOD_HYPR 0xf
#define MOD_MEH 0x7
// Aliases for shifted symbols
// Each key has a 4-letter code, and some have longer aliases too.
// While the long aliases are descriptive, the 4-letter codes
// make for nicer grid layouts (everything lines up), and are
// the preferred style for Quantum.
#define KC_TILD LSFT(KC_GRV) // ~
#define KC_TILDE KC_TILD
#define KC_EXLM LSFT(KC_1) // !
#define KC_EXCLAIM KC_EXLM
#define KC_AT LSFT(KC_2) // @
#define KC_HASH LSFT(KC_3) // #
#define KC_DLR LSFT(KC_4) // $
#define KC_DOLLAR KC_DLR
#define KC_PERC LSFT(KC_5) // %
#define KC_PERCENT KC_PERC
#define KC_CIRC LSFT(KC_6) // ^
#define KC_CIRCUMFLEX KC_CIRC
#define KC_AMPR LSFT(KC_7) // &
#define KC_AMPERSAND KC_AMPR
#define KC_ASTR LSFT(KC_8) // *
#define KC_ASTERISK KC_ASTR
#define KC_LPRN LSFT(KC_9) // (
#define KC_LEFT_PAREN KC_LPRN
#define KC_RPRN LSFT(KC_0) // )
#define KC_RIGHT_PAREN KC_RPRN
#define KC_UNDS LSFT(KC_MINS) // _
#define KC_UNDERSCORE KC_UNDS
#define KC_PLUS LSFT(KC_EQL) // +
#define KC_LCBR LSFT(KC_LBRC) // {
#define KC_LEFT_CURLY_BRACE KC_LCBR
#define KC_RCBR LSFT(KC_RBRC) // }
#define KC_RIGHT_CURLY_BRACE KC_RCBR
#define KC_LABK LSFT(KC_COMM) // <
#define KC_LEFT_ANGLE_BRACKET KC_LABK
#define KC_RABK LSFT(KC_DOT) // >
#define KC_RIGHT_ANGLE_BRACKET KC_RABK
#define KC_COLN LSFT(KC_SCLN) // :
#define KC_COLON KC_COLN
#define KC_PIPE LSFT(KC_BSLS) // |
#define KC_LT LSFT(KC_COMM) // <
#define KC_GT LSFT(KC_DOT) // >
#define KC_QUES LSFT(KC_SLSH) // ?
#define KC_QUESTION KC_QUES
#define KC_DQT LSFT(KC_QUOT) // "
#define KC_DOUBLE_QUOTE KC_DQT
#define KC_DQUO KC_DQT
#define KC_DELT KC_DELETE // Del key (four letter code)
// Alias for function layers than expand past FN31
#define FUNC(kc) (kc | QK_FUNCTION)
// Aliases
#define S(kc) LSFT(kc)
#define F(kc) FUNC(kc)
#define M(kc) (kc | QK_MACRO)
#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
// L-ayer, T-ap - 256 keycode max, 16 layer max
#define LT(layer, kc) (kc | QK_LAYER_TAP | ((layer & 0xF) << 8))
#define AG_SWAP MAGIC_SWAP_ALT_GUI
#define AG_NORM MAGIC_UNSWAP_ALT_GUI
#define BL_ON BL_9
#define BL_OFF BL_0
// GOTO layer - 16 layers max
// when:
// ON_PRESS = 1
// ON_RELEASE = 2
// Unless you have a good reason not to do so, prefer ON_PRESS (1) as your default.
#define TO(layer, when) (layer | QK_TO | (when << 0x4))
// Momentary switch layer - 256 layer max
#define MO(layer) (layer | QK_MOMENTARY)
// Set default layer - 256 layer max
#define DF(layer) (layer | QK_DEF_LAYER)
// Toggle to layer - 256 layer max
#define TG(layer) (layer | QK_TOGGLE_LAYER)
// One-shot layer - 256 layer max
#define OSL(layer) (layer | QK_ONE_SHOT_LAYER)
// One-shot mod
#define OSM(layer) (layer | QK_ONE_SHOT_MOD)
// M-od, T-ap - 256 keycode max
#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8))
#define CTL_T(kc) MT(MOD_LCTL, kc)
#define SFT_T(kc) MT(MOD_LSFT, kc)
#define ALT_T(kc) MT(MOD_LALT, kc)
#define GUI_T(kc) MT(MOD_LGUI, kc)
#define C_S_T(kc) MT(MOD_LCTL | MOD_LSFT, kc) // Control + Shift e.g. for gnome-terminal
#define MEH_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT, kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
#define LCAG_T(kc) MT(MOD_LCTL | MOD_LALT | MOD_LGUI, kc) // Left control alt and gui
#define ALL_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI, kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
#define KC_HYPR HYPR(KC_NO)
#define KC_MEH MEH(KC_NO)
#ifdef UNICODE_ENABLE
// For sending unicode codes.
// You may not send codes over 7FFF -- this supports most of UTF8.
// To have a key that sends out Œ, go UC(0x0152)
#define UNICODE(n) (n | QK_UNICODE)
#define UC(n) UNICODE(n)
#endif
#endif

View file

@ -1,323 +0,0 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap_common.h"
#include "report.h"
#include "keycode.h"
#include "action_layer.h"
#include <util/delay.h>
#include "action.h"
#include "action_macro.h"
#include "debug.h"
#include "backlight.h"
#include "bootloader.h"
#include "eeconfig.h"
#include "quantum.h"
#ifdef MIDI_ENABLE
#include "keymap_midi.h"
#endif
extern keymap_config_t keymap_config;
#include <stdio.h>
#include <inttypes.h>
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif /* AUDIO_ENABLE */
static action_t keycode_to_action(uint16_t keycode);
/* converts key to action */
action_t action_for_key(uint8_t layer, keypos_t key)
{
// 16bit keycodes - important
uint16_t keycode = keymap_key_to_keycode(layer, key);
switch (keycode) {
case KC_FN0 ... KC_FN31:
return keymap_fn_to_action(keycode);
case KC_CAPSLOCK:
case KC_LOCKING_CAPS:
if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
return keycode_to_action(KC_LCTL);
}
return keycode_to_action(keycode);
case KC_LCTL:
if (keymap_config.swap_control_capslock) {
return keycode_to_action(KC_CAPSLOCK);
}
return keycode_to_action(KC_LCTL);
case KC_LALT:
if (keymap_config.swap_lalt_lgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
}
return keycode_to_action(KC_LALT);
case KC_LGUI:
if (keymap_config.swap_lalt_lgui) {
return keycode_to_action(KC_LALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
case KC_RALT:
if (keymap_config.swap_ralt_rgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
}
return keycode_to_action(KC_RALT);
case KC_RGUI:
if (keymap_config.swap_ralt_rgui) {
return keycode_to_action(KC_RALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
case KC_GRAVE:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_ESC);
}
return keycode_to_action(KC_GRAVE);
case KC_ESC:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_GRAVE);
}
return keycode_to_action(KC_ESC);
case KC_BSLASH:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSPACE);
}
return keycode_to_action(KC_BSLASH);
case KC_BSPACE:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSLASH);
}
return keycode_to_action(KC_BSPACE);
default:
return keycode_to_action(keycode);
}
}
/* Macro */
__attribute__ ((weak))
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
return MACRO_NONE;
}
/* Function */
__attribute__ ((weak))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
/* translates keycode to action */
static action_t keycode_to_action(uint16_t keycode)
{
action_t action;
switch (keycode) {
case KC_A ... KC_EXSEL:
case KC_LCTRL ... KC_RGUI:
action.code = ACTION_KEY(keycode);
break;
case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
break;
case KC_AUDIO_MUTE ... KC_WWW_FAVORITES:
action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
break;
case KC_MS_UP ... KC_MS_ACCEL2:
action.code = ACTION_MOUSEKEY(keycode);
break;
case KC_TRNS:
action.code = ACTION_TRANSPARENT;
break;
case LCTL(0) ... 0x1FFF: ;
// Has a modifier
// Split it up
action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); // adds modifier to key
break;
case FUNC(0) ... FUNC(0xFFF): ;
// Is a shortcut for function layer, pull last 12bits
// This means we have 4,096 FN macros at our disposal
return keymap_func_to_action(keycode & 0xFFF);
break;
case M(0) ... M(0xFF):
action.code = ACTION_MACRO(keycode & 0xFF);
break;
case LT(0, 0) ... LT(0xFF, 0xF):
action.code = ACTION_LAYER_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
break;
#ifdef BACKLIGHT_ENABLE
case BL_0 ... BL_15:
action.code = ACTION_BACKLIGHT_LEVEL(keycode & 0x000F);
break;
case BL_DEC:
action.code = ACTION_BACKLIGHT_DECREASE();
break;
case BL_INC:
action.code = ACTION_BACKLIGHT_INCREASE();
break;
case BL_TOGG:
action.code = ACTION_BACKLIGHT_TOGGLE();
break;
case BL_STEP:
action.code = ACTION_BACKLIGHT_STEP();
break;
#endif
case RESET: ; // RESET is 0x5000, which is why this is here
clear_keyboard();
#ifdef AUDIO_ENABLE
stop_all_notes();
shutdown_user();
#endif
_delay_ms(250);
#ifdef ATREUS_ASTAR
*(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
#endif
bootloader_jump();
break;
case DEBUG: ; // DEBUG is 0x5001
print("\nDEBUG: enabled.\n");
debug_enable = true;
break;
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_UNSWAP_ALT_GUI:
// MAGIC actions (BOOTMAGIC without the boot)
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
if (keycode == MAGIC_SWAP_CONTROL_CAPSLOCK) {
keymap_config.swap_control_capslock = 1;
} else if (keycode == MAGIC_CAPSLOCK_TO_CONTROL) {
keymap_config.capslock_to_control = 1;
} else if (keycode == MAGIC_SWAP_LALT_LGUI) {
keymap_config.swap_lalt_lgui = 1;
} else if (keycode == MAGIC_SWAP_RALT_RGUI) {
keymap_config.swap_ralt_rgui = 1;
} else if (keycode == MAGIC_NO_GUI) {
keymap_config.no_gui = 1;
} else if (keycode == MAGIC_SWAP_GRAVE_ESC) {
keymap_config.swap_grave_esc = 1;
} else if (keycode == MAGIC_SWAP_BACKSLASH_BACKSPACE) {
keymap_config.swap_backslash_backspace = 1;
} else if (keycode == MAGIC_HOST_NKRO) {
keymap_config.nkro = 1;
} else if (keycode == MAGIC_SWAP_ALT_GUI) {
keymap_config.swap_lalt_lgui = 1;
keymap_config.swap_ralt_rgui = 1;
}
/* UNs */
else if (keycode == MAGIC_UNSWAP_CONTROL_CAPSLOCK) {
keymap_config.swap_control_capslock = 0;
} else if (keycode == MAGIC_UNCAPSLOCK_TO_CONTROL) {
keymap_config.capslock_to_control = 0;
} else if (keycode == MAGIC_UNSWAP_LALT_LGUI) {
keymap_config.swap_lalt_lgui = 0;
} else if (keycode == MAGIC_UNSWAP_RALT_RGUI) {
keymap_config.swap_ralt_rgui = 0;
} else if (keycode == MAGIC_UNNO_GUI) {
keymap_config.no_gui = 0;
} else if (keycode == MAGIC_UNSWAP_GRAVE_ESC) {
keymap_config.swap_grave_esc = 0;
} else if (keycode == MAGIC_UNSWAP_BACKSLASH_BACKSPACE) {
keymap_config.swap_backslash_backspace = 0;
} else if (keycode == MAGIC_UNHOST_NKRO) {
keymap_config.nkro = 0;
} else if (keycode == MAGIC_UNSWAP_ALT_GUI) {
keymap_config.swap_lalt_lgui = 0;
keymap_config.swap_ralt_rgui = 0;
}
eeconfig_update_keymap(keymap_config.raw);
break;
case TO(0, 1) ... OSM(0xFF): ;
// Layer movement shortcuts
// See .h to see constraints/usage
int type = (keycode >> 0x8) & 0xF;
if (type == 0x1) {
// Layer set "GOTO"
int when = (keycode >> 0x4) & 0x3;
int layer = keycode & 0xF;
action.code = ACTION_LAYER_SET(layer, when);
} else if (type == 0x2) {
// Momentary layer
int layer = keycode & 0xFF;
action.code = ACTION_LAYER_MOMENTARY(layer);
} else if (type == 0x3) {
// Set default layer
int layer = keycode & 0xFF;
action.code = ACTION_DEFAULT_LAYER_SET(layer);
} else if (type == 0x4) {
// Set default layer
int layer = keycode & 0xFF;
action.code = ACTION_LAYER_TOGGLE(layer);
} else if (type == 0x5) {
// OSL(layer) - One-shot layer
int layer = keycode & 0xFF;
action.code = ACTION_LAYER_ONESHOT(layer);
} else if (type == 0x6) {
// OSM(mod) - One-shot mod
int mod = keycode & 0xFF;
action.code = ACTION_MODS_ONESHOT(mod);
}
break;
case MT(0, 0) ... MT(0xF, 0xFF):
action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
break;
default:
action.code = ACTION_NO;
break;
}
return action;
}
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
// Read entire word (16bits)
return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint16_t keycode)
{
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
}
action_t keymap_func_to_action(uint16_t keycode)
{
// For FUNC without 8bit limit
return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) };
}
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}

View file

@ -1,292 +0,0 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_H
#define KEYMAP_H
#include <stdint.h>
#include <stdbool.h>
#include "action.h"
#include <avr/pgmspace.h>
#include "keycode.h"
#include "keymap.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
// #include "print.h"
#include "debug.h"
/* NOTE: Not portable. Bit field order depends on implementation */
typedef union {
uint16_t raw;
struct {
bool swap_control_capslock:1;
bool capslock_to_control:1;
bool swap_lalt_lgui:1;
bool swap_ralt_rgui:1;
bool no_gui:1;
bool swap_grave_esc:1;
bool swap_backslash_backspace:1;
bool nkro:1;
};
} keymap_config_t;
/* translates key to keycode */
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint16_t keycode);
/* translates Fn keycode to action */
action_t keymap_func_to_action(uint16_t keycode);
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
// Ability to use mods in layouts
#define LCTL(kc) kc | 0x0100
#define LSFT(kc) kc | 0x0200
#define LALT(kc) kc | 0x0400
#define LGUI(kc) kc | 0x0800
#define HYPR(kc) kc | 0x0F00
#define MEH(kc) kc | 0x0700
#define LCAG(kc) kc | 0x0D00 // Modifier Ctrl Alt and GUI
#define MOD_HYPR 0xf
#define MOD_MEH 0x7
#define RCTL(kc) kc | 0x1100
#define RSFT(kc) kc | 0x1200
#define RALT(kc) kc | 0x1400
#define RGUI(kc) kc | 0x1800
// Aliases for shifted symbols
// Each key has a 4-letter code, and some have longer aliases too.
// While the long aliases are descriptive, the 4-letter codes
// make for nicer grid layouts (everything lines up), and are
// the preferred style for Quantum.
#define KC_TILD LSFT(KC_GRV) // ~
#define KC_TILDE KC_TILD
#define KC_EXLM LSFT(KC_1) // !
#define KC_EXCLAIM KC_EXLM
#define KC_AT LSFT(KC_2) // @
#define KC_HASH LSFT(KC_3) // #
#define KC_DLR LSFT(KC_4) // $
#define KC_DOLLAR KC_DLR
#define KC_PERC LSFT(KC_5) // %
#define KC_PERCENT KC_PERC
#define KC_CIRC LSFT(KC_6) // ^
#define KC_CIRCUMFLEX KC_CIRC
#define KC_AMPR LSFT(KC_7) // &
#define KC_AMPERSAND KC_AMPR
#define KC_ASTR LSFT(KC_8) // *
#define KC_ASTERISK KC_ASTR
#define KC_LPRN LSFT(KC_9) // (
#define KC_LEFT_PAREN KC_LPRN
#define KC_RPRN LSFT(KC_0) // )
#define KC_RIGHT_PAREN KC_RPRN
#define KC_UNDS LSFT(KC_MINS) // _
#define KC_UNDERSCORE KC_UNDS
#define KC_PLUS LSFT(KC_EQL) // +
#define KC_LCBR LSFT(KC_LBRC) // {
#define KC_LEFT_CURLY_BRACE KC_LCBR
#define KC_RCBR LSFT(KC_RBRC) // }
#define KC_RIGHT_CURLY_BRACE KC_RCBR
#define KC_LABK LSFT(KC_COMM) // <
#define KC_LEFT_ANGLE_BRACKET KC_LABK
#define KC_RABK LSFT(KC_DOT) // >
#define KC_RIGHT_ANGLE_BRACKET KC_RABK
#define KC_COLN LSFT(KC_SCLN) // :
#define KC_COLON KC_COLN
#define KC_PIPE LSFT(KC_BSLS) // |
#define KC_LT LSFT(KC_COMM) // <
#define KC_GT LSFT(KC_DOT) // >
#define KC_QUES LSFT(KC_SLSH) // ?
#define KC_QUESTION KC_QUES
#define KC_DQT LSFT(KC_QUOT) // "
#define KC_DOUBLE_QUOTE KC_DQT
#define KC_DQUO KC_DQT
#define KC_DELT KC_DELETE // Del key (four letter code)
// Alias for function layers than expand past FN31
#define FUNC(kc) kc | 0x2000
// Aliases
#define S(kc) LSFT(kc)
#define F(kc) FUNC(kc)
#define M(kc) (kc | 0x3000)
#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
// 0x3100+ is free
// L-ayer, T-ap - 256 keycode max, 16 layer max
#define LT(layer, kc) (kc | 0x4000 | ((layer & 0xF) << 8))
#define RESET 0x5000
#define DEBUG 0x5001
// MAGIC keycodes
#define MAGIC_SWAP_CONTROL_CAPSLOCK 0x5002
#define MAGIC_UNSWAP_CONTROL_CAPSLOCK 0x5003
#define MAGIC_CAPSLOCK_TO_CONTROL 0x5004
#define MAGIC_UNCAPSLOCK_TO_CONTROL 0x5005
#define MAGIC_SWAP_LALT_LGUI 0x5006
#define MAGIC_UNSWAP_LALT_LGUI 0x5007
#define MAGIC_SWAP_RALT_RGUI 0x5008
#define MAGIC_UNSWAP_RALT_RGUI 0x5009
#define MAGIC_NO_GUI 0x500a
#define MAGIC_UNNO_GUI 0x500b
#define MAGIC_SWAP_GRAVE_ESC 0x500c
#define MAGIC_UNSWAP_GRAVE_ESC 0x500d
#define MAGIC_SWAP_BACKSLASH_BACKSPACE 0x500e
#define MAGIC_UNSWAP_BACKSLASH_BACKSPACE 0x500f
#define MAGIC_HOST_NKRO 0x5010
#define MAGIC_UNHOST_NKRO 0x5011
#define MAGIC_SWAP_ALT_GUI 0x5012
#define MAGIC_UNSWAP_ALT_GUI 0x5013
#define AG_SWAP MAGIC_SWAP_ALT_GUI
#define AG_NORM MAGIC_UNSWAP_ALT_GUI
#define KC_LEAD 0x5014
// Audio on/off
#define AU_ON 0x5020
#define AU_OFF 0x5021
#define AU_TOG 0x5022
// Music mode on/off
#define MU_ON 0x5023
#define MU_OFF 0x5024
#define MU_TOG 0x5025
// Music voice iterate
#define MUV_IN 0x5026
#define MUV_DE 0x5027
// Midi mode on/off
#define MI_ON 0x5028
#define MI_OFF 0x5029
// These affect the backlight (if your keyboard has one).
// We don't need to comment them out if your keyboard doesn't have a backlight,
// since they don't take up any space.
#define BL_ON 0x5079
#define BL_OFF 0x5070
#define BL_0 0x5070
#define BL_1 0x5071
#define BL_2 0x5072
#define BL_3 0x5073
#define BL_4 0x5074
#define BL_5 0x5075
#define BL_6 0x5076
#define BL_7 0x5077
#define BL_8 0x5078
#define BL_9 0x5079
#define BL_10 0x507A
#define BL_11 0x507B
#define BL_12 0x507C
#define BL_13 0x507D
#define BL_14 0x507E
#define BL_15 0x507F
#define BL_DEC 0x5080
#define BL_INC 0x5081
#define BL_TOGG 0x5082
#define BL_STEP 0x5083
#define KC_LSPO 0x5084 // Left shift, open parens when tapped
#define KC_RSPC 0x5085 // Right shift, close parens when tapped
// GOTO layer - 16 layers max
// when:
// ON_PRESS = 1
// ON_RELEASE = 2
// Unless you have a good reason not to do so, prefer ON_PRESS (1) as your default.
#define TO(layer, when) (layer | 0x5100 | (when << 0x4))
// Momentary switch layer - 256 layer max
#define MO(layer) (layer | 0x5200)
// Set default layer - 256 layer max
#define DF(layer) (layer | 0x5300)
// Toggle to layer - 256 layer max
#define TG(layer) (layer | 0x5400)
// One-shot layer - 256 layer max
#define OSL(layer) (layer | 0x5500)
// One-shot mod
#define OSM(layer) (layer | 0x5600)
// chording is currently at 0x57xx
// M-od, T-ap - 256 keycode max
#define MT(mod, kc) (kc | 0x7000 | ((mod & 0xF) << 8))
#define CTL_T(kc) MT(0x1, kc)
#define SFT_T(kc) MT(0x2, kc)
#define ALT_T(kc) MT(0x4, kc)
#define GUI_T(kc) MT(0x8, kc)
#define C_S_T(kc) MT(0x3, kc) // Control + Shift e.g. for gnome-terminal
#define MEH_T(kc) MT(0x7, kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
#define LCAG_T(kc) MT(0xD, kc) // Left control alt and gui
#define ALL_T(kc) MT(0xF, kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
#define KC_HYPR HYPR(KC_NO)
#define KC_MEH MEH(KC_NO)
#ifdef UNICODE_ENABLE
// For sending unicode codes.
// You may not send codes over 7FFF -- this supports most of UTF8.
// To have a key that sends out Œ, go UC(0x0152)
#define UNICODE(n) (n | 0x8000)
#define UC(n) UNICODE(n)
#endif
// For tri-layer
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
#define IS_LAYER_ON(layer) (layer_state & (1UL << (layer)))
#define IS_LAYER_OFF(layer) (~layer_state & (1UL << (layer)))
#endif

View file

@ -2,7 +2,7 @@
#ifndef KEYMAP_BEPO_H #ifndef KEYMAP_BEPO_H
#define KEYMAP_BEPO_H #define KEYMAP_BEPO_H
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#ifndef ALTGR #ifndef ALTGR

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_COLEMAK_H #ifndef KEYMAP_COLEMAK_H
#define KEYMAP_COLEMAK_H #define KEYMAP_COLEMAK_H
#include "keymap_common.h" #include "keymap.h"
// For software implementation of colemak // For software implementation of colemak
#define CM_Q KC_Q #define CM_Q KC_Q
#define CM_W KC_W #define CM_W KC_W

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_DVORAK_H #ifndef KEYMAP_DVORAK_H
#define KEYMAP_DVORAK_H #define KEYMAP_DVORAK_H
#include "keymap_common.h" #include "keymap.h"
// Normal characters // Normal characters
#define DV_GRV KC_GRV #define DV_GRV KC_GRV

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_FR_CH #ifndef KEYMAP_FR_CH
#define KEYMAP_FR_CH #define KEYMAP_FR_CH
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_FRENCH_H #ifndef KEYMAP_FRENCH_H
#define KEYMAP_FRENCH_H #define KEYMAP_FRENCH_H
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_FRENCH_OSX_H #ifndef KEYMAP_FRENCH_OSX_H
#define KEYMAP_FRENCH_OSX_H #define KEYMAP_FRENCH_OSX_H
#include "keymap_common.h" #include "keymap.h"
// Normal characters // Normal characters
#define FR_AT KC_GRV #define FR_AT KC_GRV

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_GERMAN #ifndef KEYMAP_GERMAN
#define KEYMAP_GERMAN #define KEYMAP_GERMAN
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_SWISS_GERMAN #ifndef KEYMAP_SWISS_GERMAN
#define KEYMAP_SWISS_GERMAN #define KEYMAP_SWISS_GERMAN
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -4,7 +4,7 @@
#ifdef KEYMAP_GERMAN #ifdef KEYMAP_GERMAN
#warning redefining german keys #warning redefining german keys
#endif #endif
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_NEO2 #ifndef KEYMAP_NEO2
#define KEYMAP_NEO2 #define KEYMAP_NEO2
#include "keymap_common.h" #include "keymap.h"
#include "keymap_extras/keymap_german.h" #include "keymap_extras/keymap_german.h"
#define NEO_A KC_D #define NEO_A KC_D

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_NORDIC_H #ifndef KEYMAP_NORDIC_H
#define KEYMAP_NORDIC_H #define KEYMAP_NORDIC_H
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_PLOVER_H #ifndef KEYMAP_PLOVER_H
#define KEYMAP_PLOVER_H #define KEYMAP_PLOVER_H
#include "keymap_common.h" #include "keymap.h"
#define PV_NUM KC_1 #define PV_NUM KC_1
#define PV_LS KC_Q #define PV_LS KC_Q

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_SPANISH_H #ifndef KEYMAP_SPANISH_H
#define KEYMAP_SPANISH_H #define KEYMAP_SPANISH_H
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -1,7 +1,7 @@
#ifndef KEYMAP_UK_H #ifndef KEYMAP_UK_H
#define KEYMAP_UK_H #define KEYMAP_UK_H
#include "keymap_common.h" #include "keymap.h"
// Alt gr // Alt gr
#define ALGR(kc) kc | 0x1400 #define ALGR(kc) kc | 0x1400

View file

@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#include "keymap_common.h" #include "keymap.h"
#include "keymap_midi.h" #include "keymap_midi.h"
uint8_t starting_note = 0x0C; uint8_t starting_note = 0x0C;

View file

@ -1,5 +1,4 @@
#include "quantum.h" #include "quantum.h"
#include "timer.h"
__attribute__ ((weak)) __attribute__ ((weak))
void matrix_init_kb(void) {} void matrix_init_kb(void) {}
@ -35,15 +34,15 @@ int offset = 7;
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
bool music_activated = false; bool music_activated = false;
// music sequencer // music sequencer
static bool music_sequence_recording = false; static bool music_sequence_recording = false;
static bool music_sequence_playing = false; static bool music_sequence_playing = false;
static float music_sequence[16] = {0}; static float music_sequence[16] = {0};
static uint8_t music_sequence_count = 0; static uint8_t music_sequence_count = 0;
static uint8_t music_sequence_position = 0; static uint8_t music_sequence_position = 0;
static uint16_t music_sequence_timer = 0; static uint16_t music_sequence_timer = 0;
static uint16_t music_sequence_interval = 100; static uint16_t music_sequence_interval = 100;
#endif #endif
@ -172,10 +171,6 @@ bool process_record_quantum(keyrecord_t *record) {
if (record->event.pressed) { if (record->event.pressed) {
starting_note++; // Change key starting_note++; // Change key
midi_send_cc(&midi_device, 0, 0x7B, 0); midi_send_cc(&midi_device, 0, 0x7B, 0);
// midi_send_cc(&midi_device, 1, 0x7B, 0);
// midi_send_cc(&midi_device, 2, 0x7B, 0);
// midi_send_cc(&midi_device, 3, 0x7B, 0);
// midi_send_cc(&midi_device, 4, 0x7B, 0);
} }
return false; return false;
} }
@ -183,29 +178,17 @@ bool process_record_quantum(keyrecord_t *record) {
if (record->event.pressed) { if (record->event.pressed) {
starting_note--; // Change key starting_note--; // Change key
midi_send_cc(&midi_device, 0, 0x7B, 0); midi_send_cc(&midi_device, 0, 0x7B, 0);
// midi_send_cc(&midi_device, 1, 0x7B, 0);
// midi_send_cc(&midi_device, 2, 0x7B, 0);
// midi_send_cc(&midi_device, 3, 0x7B, 0);
// midi_send_cc(&midi_device, 4, 0x7B, 0);
} }
return false; return false;
} }
if (record->event.key.col == (MATRIX_COLS - 3) && record->event.key.row == (MATRIX_ROWS - 1) && record->event.pressed) { if (record->event.key.col == (MATRIX_COLS - 3) && record->event.key.row == (MATRIX_ROWS - 1) && record->event.pressed) {
offset++; // Change scale offset++; // Change scale
midi_send_cc(&midi_device, 0, 0x7B, 0); midi_send_cc(&midi_device, 0, 0x7B, 0);
// midi_send_cc(&midi_device, 1, 0x7B, 0);
// midi_send_cc(&midi_device, 2, 0x7B, 0);
// midi_send_cc(&midi_device, 3, 0x7B, 0);
// midi_send_cc(&midi_device, 4, 0x7B, 0);
return false; return false;
} }
if (record->event.key.col == (MATRIX_COLS - 4) && record->event.key.row == (MATRIX_ROWS - 1) && record->event.pressed) { if (record->event.key.col == (MATRIX_COLS - 4) && record->event.key.row == (MATRIX_ROWS - 1) && record->event.pressed) {
offset--; // Change scale offset--; // Change scale
midi_send_cc(&midi_device, 0, 0x7B, 0); midi_send_cc(&midi_device, 0, 0x7B, 0);
// midi_send_cc(&midi_device, 1, 0x7B, 0);
// midi_send_cc(&midi_device, 2, 0x7B, 0);
// midi_send_cc(&midi_device, 3, 0x7B, 0);
// midi_send_cc(&midi_device, 4, 0x7B, 0);
return false; return false;
} }
// basic // basic
@ -365,7 +348,7 @@ bool process_record_quantum(keyrecord_t *record) {
#define DISABLE_CHORDING #define DISABLE_CHORDING
#ifndef DISABLE_CHORDING #ifndef DISABLE_CHORDING
if (keycode >= 0x5700 && keycode <= 0x57FF) { if (keycode >= QK_CHORDING && keycode <= QK_CHORDING_MAX) {
if (record->event.pressed) { if (record->event.pressed) {
if (!chording) { if (!chording) {
chording = true; chording = true;
@ -403,7 +386,7 @@ bool process_record_quantum(keyrecord_t *record) {
#ifdef UNICODE_ENABLE #ifdef UNICODE_ENABLE
if (keycode > UNICODE(0) && record->event.pressed) { if (keycode > QK_UNICODE && record->event.pressed) {
uint16_t unicode = keycode & 0x7FFF; uint16_t unicode = keycode & 0x7FFF;
switch(input_mode) { switch(input_mode) {
case UC_OSX: case UC_OSX:
@ -443,42 +426,117 @@ bool process_record_quantum(keyrecord_t *record) {
// Shift / paren setup // Shift / paren setup
switch(keycode) { switch(keycode) {
case RESET:
if (record->event.pressed) {
clear_keyboard();
#ifdef AUDIO_ENABLE
stop_all_notes();
shutdown_user();
#endif
_delay_ms(250);
#ifdef ATREUS_ASTAR
*(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
#endif
bootloader_jump();
return false;
}
break;
case DEBUG:
if (record->event.pressed) {
print("\nDEBUG: enabled.\n");
debug_enable = true;
return false;
}
break;
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_UNSWAP_ALT_GUI:
if (record->event.pressed) {
// MAGIC actions (BOOTMAGIC without the boot)
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
if (keycode == MAGIC_SWAP_CONTROL_CAPSLOCK) {
keymap_config.swap_control_capslock = 1;
} else if (keycode == MAGIC_CAPSLOCK_TO_CONTROL) {
keymap_config.capslock_to_control = 1;
} else if (keycode == MAGIC_SWAP_LALT_LGUI) {
keymap_config.swap_lalt_lgui = 1;
} else if (keycode == MAGIC_SWAP_RALT_RGUI) {
keymap_config.swap_ralt_rgui = 1;
} else if (keycode == MAGIC_NO_GUI) {
keymap_config.no_gui = 1;
} else if (keycode == MAGIC_SWAP_GRAVE_ESC) {
keymap_config.swap_grave_esc = 1;
} else if (keycode == MAGIC_SWAP_BACKSLASH_BACKSPACE) {
keymap_config.swap_backslash_backspace = 1;
} else if (keycode == MAGIC_HOST_NKRO) {
keymap_config.nkro = 1;
} else if (keycode == MAGIC_SWAP_ALT_GUI) {
keymap_config.swap_lalt_lgui = 1;
keymap_config.swap_ralt_rgui = 1;
}
/* UNs */
else if (keycode == MAGIC_UNSWAP_CONTROL_CAPSLOCK) {
keymap_config.swap_control_capslock = 0;
} else if (keycode == MAGIC_UNCAPSLOCK_TO_CONTROL) {
keymap_config.capslock_to_control = 0;
} else if (keycode == MAGIC_UNSWAP_LALT_LGUI) {
keymap_config.swap_lalt_lgui = 0;
} else if (keycode == MAGIC_UNSWAP_RALT_RGUI) {
keymap_config.swap_ralt_rgui = 0;
} else if (keycode == MAGIC_UNNO_GUI) {
keymap_config.no_gui = 0;
} else if (keycode == MAGIC_UNSWAP_GRAVE_ESC) {
keymap_config.swap_grave_esc = 0;
} else if (keycode == MAGIC_UNSWAP_BACKSLASH_BACKSPACE) {
keymap_config.swap_backslash_backspace = 0;
} else if (keycode == MAGIC_UNHOST_NKRO) {
keymap_config.nkro = 0;
} else if (keycode == MAGIC_UNSWAP_ALT_GUI) {
keymap_config.swap_lalt_lgui = 0;
keymap_config.swap_ralt_rgui = 0;
}
eeconfig_update_keymap(keymap_config.raw);
return false;
}
break;
case KC_LSPO: { case KC_LSPO: {
if (record->event.pressed) { if (record->event.pressed) {
shift_interrupted[0] = false; shift_interrupted[0] = false;
register_mods(MOD_LSFT); register_mods(MOD_LSFT);
} }
else { else {
if (!shift_interrupted[0]) { if (!shift_interrupted[0]) {
register_code(LSPO_KEY); register_code(LSPO_KEY);
unregister_code(LSPO_KEY); unregister_code(LSPO_KEY);
} }
unregister_mods(MOD_LSFT); unregister_mods(MOD_LSFT);
} }
return false; return false;
break; break;
} }
case KC_RSPC: { case KC_RSPC: {
if (record->event.pressed) { if (record->event.pressed) {
shift_interrupted[1] = false; shift_interrupted[1] = false;
register_mods(MOD_RSFT); register_mods(MOD_RSFT);
} }
else { else {
if (!shift_interrupted[1]) { if (!shift_interrupted[1]) {
register_code(RSPC_KEY); register_code(RSPC_KEY);
unregister_code(RSPC_KEY); unregister_code(RSPC_KEY);
} }
unregister_mods(MOD_RSFT); unregister_mods(MOD_RSFT);
} }
return false; return false;
break; break;
} }
default: { default: {
shift_interrupted[0] = true; shift_interrupted[0] = true;
shift_interrupted[1] = true; shift_interrupted[1] = true;
break; break;
} }
} }
return process_action_kb(record); return process_action_kb(record);
@ -586,6 +644,13 @@ void send_string(const char *str) {
} }
} }
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_quantum() { void matrix_init_quantum() {
matrix_init_kb(); matrix_init_kb();

View file

@ -3,7 +3,7 @@
#include <avr/pgmspace.h> #include <avr/pgmspace.h>
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#ifdef BACKLIGHT_ENABLE #ifdef BACKLIGHT_ENABLE
#include "backlight.h" #include "backlight.h"
#endif #endif
@ -25,8 +25,8 @@
#include <stddef.h> #include <stddef.h>
#include <avr/io.h> #include <avr/io.h>
#include <util/delay.h> #include <util/delay.h>
#include "bootloader.h"
#define SEND_STRING(str) send_string(PSTR(str)) #include "timer.h"
extern uint32_t default_layer_state; extern uint32_t default_layer_state;
@ -62,15 +62,20 @@ extern uint32_t default_layer_state;
#define LEADER_DICTIONARY() if (leading && timer_elapsed(leader_time) > LEADER_TIMEOUT) #define LEADER_DICTIONARY() if (leading && timer_elapsed(leader_time) > LEADER_TIMEOUT)
#endif #endif
#define SEND_STRING(str) send_string(PSTR(str))
void send_string(const char *str); void send_string(const char *str);
// For tri-layer
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
#define IS_LAYER_ON(layer) (layer_state & (1UL << (layer)))
#define IS_LAYER_OFF(layer) (~layer_state & (1UL << (layer)))
void matrix_init_kb(void); void matrix_init_kb(void);
void matrix_scan_kb(void); void matrix_scan_kb(void);
bool process_action_kb(keyrecord_t *record); bool process_action_kb(keyrecord_t *record);
bool process_record_kb(uint16_t keycode, keyrecord_t *record); bool process_record_kb(uint16_t keycode, keyrecord_t *record);
bool process_record_user(uint16_t keycode, keyrecord_t *record); bool process_record_user(uint16_t keycode, keyrecord_t *record);
bool is_music_on(void); bool is_music_on(void);
void music_toggle(void); void music_toggle(void);
void music_on(void); void music_on(void);

View file

@ -2,7 +2,7 @@
#define %KEYBOARD_UPPERCASE%_H #define %KEYBOARD_UPPERCASE%_H
#include "matrix.h" #include "matrix.h"
#include "keymap_common.h" #include "keymap.h"
#ifdef BACKLIGHT_ENABLE #ifdef BACKLIGHT_ENABLE
#include "backlight.h" #include "backlight.h"
#endif #endif

View file

@ -6,7 +6,6 @@ SRC += $(COMMON_DIR)/host.c \
$(COMMON_DIR)/action_macro.c \ $(COMMON_DIR)/action_macro.c \
$(COMMON_DIR)/action_layer.c \ $(COMMON_DIR)/action_layer.c \
$(COMMON_DIR)/action_util.c \ $(COMMON_DIR)/action_util.c \
$(COMMON_DIR)/keymap.c \
$(COMMON_DIR)/print.c \ $(COMMON_DIR)/print.c \
$(COMMON_DIR)/debug.c \ $(COMMON_DIR)/debug.c \
$(COMMON_DIR)/util.c \ $(COMMON_DIR)/util.c \

View file

@ -1,193 +0,0 @@
/*
Copyright 2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap.h"
#include "report.h"
#include "keycode.h"
#include "action_layer.h"
#include "action.h"
#include "action_macro.h"
#include "wait.h"
#include "debug.h"
#include "bootloader.h"
static action_t keycode_to_action(uint8_t keycode);
/* converts key to action */
__attribute__ ((weak))
action_t action_for_key(uint8_t layer, keypos_t key)
{
uint8_t keycode = keymap_key_to_keycode(layer, key);
switch (keycode) {
case KC_FN0 ... KC_FN31:
return keymap_fn_to_action(keycode);
#ifdef BOOTMAGIC_ENABLE
case KC_CAPSLOCK:
case KC_LOCKING_CAPS:
if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
return keycode_to_action(KC_LCTL);
}
return keycode_to_action(keycode);
case KC_LCTL:
if (keymap_config.swap_control_capslock) {
return keycode_to_action(KC_CAPSLOCK);
}
return keycode_to_action(KC_LCTL);
case KC_LALT:
if (keymap_config.swap_lalt_lgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
}
return keycode_to_action(KC_LALT);
case KC_LGUI:
if (keymap_config.swap_lalt_lgui) {
return keycode_to_action(KC_LALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_LGUI);
case KC_RALT:
if (keymap_config.swap_ralt_rgui) {
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
}
return keycode_to_action(KC_RALT);
case KC_RGUI:
if (keymap_config.swap_ralt_rgui) {
return keycode_to_action(KC_RALT);
}
if (keymap_config.no_gui) {
return keycode_to_action(ACTION_NO);
}
return keycode_to_action(KC_RGUI);
case KC_GRAVE:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_ESC);
}
return keycode_to_action(KC_GRAVE);
case KC_ESC:
if (keymap_config.swap_grave_esc) {
return keycode_to_action(KC_GRAVE);
}
return keycode_to_action(KC_ESC);
case KC_BSLASH:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSPACE);
}
return keycode_to_action(KC_BSLASH);
case KC_BSPACE:
if (keymap_config.swap_backslash_backspace) {
return keycode_to_action(KC_BSLASH);
}
return keycode_to_action(KC_BSPACE);
#endif
default:
return keycode_to_action(keycode);
}
}
/* Macro */
__attribute__ ((weak))
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
return MACRO_NONE;
}
/* Function */
__attribute__ ((weak))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
}
/* translates keycode to action */
static action_t keycode_to_action(uint8_t keycode)
{
action_t action;
switch (keycode) {
case KC_A ... KC_EXSEL:
case KC_LCTRL ... KC_RGUI:
action.code = ACTION_KEY(keycode);
break;
case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
break;
case KC_AUDIO_MUTE ... KC_MEDIA_REWIND:
action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
break;
case KC_MS_UP ... KC_MS_ACCEL2:
action.code = ACTION_MOUSEKEY(keycode);
break;
case KC_TRNS:
action.code = ACTION_TRANSPARENT;
break;
case KC_BOOTLOADER:
action.code = ACTION_NO;
clear_keyboard();
wait_ms(50);
bootloader_jump(); // not return
break;
default:
action.code = ACTION_NO;
break;
}
return action;
}
#ifdef USE_LEGACY_KEYMAP
/*
* Legacy keymap support
* Consider using new keymap API instead.
*/
__attribute__ ((weak))
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
return keymap_get_keycode(layer, key.row, key.col);
}
/* Legacy keymap support */
__attribute__ ((weak))
action_t keymap_fn_to_action(uint8_t keycode)
{
action_t action = { .code = ACTION_NO };
switch (keycode) {
case KC_FN0 ... KC_FN31:
{
uint8_t layer = keymap_fn_layer(FN_INDEX(keycode));
uint8_t key = keymap_fn_keycode(FN_INDEX(keycode));
if (key) {
action.code = ACTION_LAYER_TAP_KEY(layer, key);
} else {
action.code = ACTION_LAYER_MOMENTARY(layer);
}
}
return action;
default:
return action;
}
}
#endif

View file

@ -1,68 +0,0 @@
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_H
#define KEYMAP_H
#include <stdint.h>
#include <stdbool.h>
#include "action.h"
/* NOTE: Not portable. Bit field order depends on implementation */
typedef union {
uint8_t raw;
struct {
bool swap_control_capslock:1;
bool capslock_to_control:1;
bool swap_lalt_lgui:1;
bool swap_ralt_rgui:1;
bool no_gui:1;
bool swap_grave_esc:1;
bool swap_backslash_backspace:1;
bool nkro:1;
};
} keymap_config_t;
keymap_config_t keymap_config;
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode);
#ifdef USE_LEGACY_KEYMAP
/*
* Legacy keymap
* Consider using new keymap API above instead.
*/
/* keycode of key */
__attribute__ ((deprecated))
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col);
/* layer to move during press Fn key */
__attribute__ ((deprecated))
uint8_t keymap_fn_layer(uint8_t fn_bits);
/* keycode to send when release Fn key without using */
__attribute__ ((deprecated))
uint8_t keymap_fn_keycode(uint8_t fn_bits);
#endif
#endif

View file

@ -18,11 +18,7 @@ LUFA_SRC = lufa.c \
$(LUFA_SRC_USB) $(LUFA_SRC_USB)
ifeq ($(strip $(MIDI_ENABLE)), yes) ifeq ($(strip $(MIDI_ENABLE)), yes)
LUFA_SRC += midi/midi.c \ include $(TMK_PATH)/protocol/midi.mk
midi/midi_device.c \
midi/bytequeue/bytequeue.c \
midi/bytequeue/interrupt_setting.c \
$(LUFA_SRC_USBCLASS)
endif endif
ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)

View file

@ -1,274 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the AudioInput demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "AudioInput.h"
/** LUFA Audio Class driver interface configuration and state information. This structure is
* passed to all Audio Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface =
{
.Config =
{
.ControlInterfaceNumber = INTERFACE_ID_AudioControl,
.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
.DataINEndpoint =
{
.Address = AUDIO_STREAM_EPADDR,
.Size = AUDIO_STREAM_EPSIZE,
.Banks = 2,
},
},
};
/** Current audio sampling frequency of the streaming audio endpoint. */
static uint32_t CurrentAudioSampleFrequency = 48000;
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
GlobalInterruptEnable();
for (;;)
{
Audio_Device_USBTask(&Microphone_Audio_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();
Buttons_Init();
ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
USB_Init();
/* Start the ADC conversion in free running mode */
ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** ISR to handle the reloading of the data endpoint with the next sample. */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Check that the USB bus is ready for the next sample to write */
if (Audio_Device_IsReadyForNextSample(&Microphone_Audio_Interface))
{
int16_t AudioSample;
#if defined(USE_TEST_TONE)
static uint8_t SquareWaveSampleCount;
static int16_t CurrentWaveValue;
/* In test tone mode, generate a square wave at 1/256 of the sample rate */
if (SquareWaveSampleCount++ == 0xFF)
CurrentWaveValue ^= 0x8000;
/* Only generate audio if the board button is being pressed */
AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
#else
/* Audio sample is ADC value scaled to fit the entire range */
AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
AudioSample -= (SAMPLE_MAX_RANGE / 2);
#endif
#endif
Audio_Device_WriteSample16(&Microphone_Audio_Interface, AudioSample);
}
Endpoint_SelectEndpoint(PrevEndpoint);
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
/* Sample reload timer initialization */
TIMSK0 = (1 << OCIE0A);
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
/* Stop the sample reload timer */
TCCR0B = 0;
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Microphone_Audio_Interface);
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Control Request reception event. */
void EVENT_USB_Device_ControlRequest(void)
{
Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface);
}
/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio endpoints.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] EndpointProperty Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
* \param[in] EndpointAddress Address of the streaming endpoint whose property is being referenced.
* \param[in] EndpointControl Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean \c true if the property get/set was successful, \c false otherwise
*/
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data)
{
/* Check the requested endpoint to see if a supported endpoint is being manipulated */
if (EndpointAddress == Microphone_Audio_Interface.Config.DataINEndpoint.Address)
{
/* Check the requested control to see if a supported control is being manipulated */
if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
{
switch (EndpointProperty)
{
case AUDIO_REQ_SetCurrent:
/* Check if we are just testing for a valid property, or actually adjusting it */
if (DataLength != NULL)
{
/* Set the new sampling frequency to the value given by the host */
CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
/* Adjust sample reload timer to the new frequency */
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
}
return true;
case AUDIO_REQ_GetCurrent:
/* Check if we are just testing for a valid property, or actually reading it */
if (DataLength != NULL)
{
*DataLength = 3;
Data[2] = (CurrentAudioSampleFrequency >> 16);
Data[1] = (CurrentAudioSampleFrequency >> 8);
Data[0] = (CurrentAudioSampleFrequency & 0xFF);
}
return true;
}
}
}
return false;
}
/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio interfaces.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] Property Property of the interface to get or set, a value from Audio_ClassRequests_t.
* \param[in] EntityAddress Address of the audio entity whose property is being referenced.
* \param[in] Parameter Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean \c true if the property GET/SET was successful, \c false otherwise
*/
bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t Property,
const uint8_t EntityAddress,
const uint16_t Parameter,
uint16_t* const DataLength,
uint8_t* Data)
{
/* No audio interface entities in the device descriptor, thus no properties to get or set. */
return false;
}

View file

@ -1,94 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for AudioInput.c.
*/
#ifndef _AUDIO_INPUT_H_
#define _AUDIO_INPUT_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Platform/Platform.h>
#include "Descriptors.h"
#include "Config/AppConfig.h"
/* Macros: */
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
/** Maximum ADC range for the microphone input. */
#define ADC_MAX_RANGE 0x3FF
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t Property,
const uint8_t EntityAddress,
const uint16_t Parameter,
uint16_t* const DataLength,
uint8_t* Data);
#endif

View file

@ -1,92 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Audio Input Device Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Standard Audio Device</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Audio 1.0 Class Specification \n
* USBIF Audio 1.0 Class Terminal Types Specification \n
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Audio demonstration application. This gives a simple reference
* application for implementing a USB Audio Input device using the
* basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function as a
* USB microphone. By default, the demo will produce a square wave test tone
* when the board button is pressed. If USE_TEST_TONE is not defined in the
* project makefile, incoming audio from the ADC channel 1 will be sampled
* and sent to the host computer instead.
*
* When in microphone mode, connect a microphone to the ADC channel 2.
*
* Under Windows, if a driver request dialogue pops up, select the option
* to automatically install the appropriate drivers.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <th><b>Define Name:</b></th>
* <th><b>Location:</b></th>
* <th><b>Description:</b></th>
* </tr>
* <tr>
* <td>MIC_IN_ADC_CHANNEL</td>
* <td>AppConfig.h</td>
* <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
* </tr>
* <tr>
* <td>USE_TEST_TONE</td>
* <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
* <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
*/

View file

@ -1,51 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Application Configuration Header File
*
* This is a header file which is be used to configure some of
* the application's compile time options, as an alternative to
* specifying the compile time constants supplied through a
* makefile or build system.
*
* For information on what each token does, refer to the
* \ref Sec_Options section of the application documentation.
*/
#ifndef _APP_CONFIG_H_
#define _APP_CONFIG_H_
#define MIC_IN_ADC_CHANNEL 2
#define MICROPHONE_BIASED_TO_HALF_RAIL
#define USE_TEST_TONE
#endif

View file

@ -1,93 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
// #define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
#define USB_DEVICE_ONLY
// #define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif

View file

@ -1,312 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(2,0,0),
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2047,
.ReleaseNumber = VERSION_BCD(0,0,2),
.ManufacturerStrIndex = STRING_ID_Manufacturer,
.ProductStrIndex = STRING_ID_Product,
.SerialNumStrIndex = NO_DESCRIPTOR,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.Audio_ControlInterface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioControl,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_ControlSubclass,
.Protocol = AUDIO_CSCP_ControlProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_ControlInterface_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_Header,
.ACSpecification = VERSION_BCD(1,0,0),
.TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
sizeof(USB_Audio_Descriptor_InputTerminal_t) +
sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
.InCollection = 1,
.InterfaceNumber = INTERFACE_ID_AudioStream,
},
.Audio_InputTerminal =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.TerminalID = 0x01,
.TerminalType = AUDIO_TERMINAL_IN_MIC,
.AssociatedOutputTerminal = 0x00,
.TotalChannels = 1,
.ChannelConfig = 0,
.ChannelStrIndex = NO_DESCRIPTOR,
.TerminalStrIndex = NO_DESCRIPTOR
},
.Audio_OutputTerminal =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.TerminalID = 0x02,
.TerminalType = AUDIO_TERMINAL_STREAMING,
.AssociatedInputTerminal = 0x00,
.SourceID = 0x01,
.TerminalStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_Alt0 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioStream,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_AudioStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_Alt1 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioStream,
.AlternateSetting = 1,
.TotalEndpoints = 1,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_AudioStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_General,
.TerminalLink = 0x02,
.FrameDelay = 1,
.AudioFormat = 0x0001
},
.Audio_AudioFormat =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
.Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType,
.FormatType = 0x01,
.Channels = 0x01,
.SubFrameSize = 0x02,
.BitResolution = 16,
.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t))
},
.Audio_AudioFormatSampleRates =
{
AUDIO_SAMPLE_FREQ(8000),
AUDIO_SAMPLE_FREQ(11025),
AUDIO_SAMPLE_FREQ(22050),
AUDIO_SAMPLE_FREQ(44100),
AUDIO_SAMPLE_FREQ(48000),
},
.Audio_StreamEndpoint =
{
.Endpoint =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = AUDIO_STREAM_EPADDR,
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.Audio_StreamEndpoint_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.Attributes = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
}
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio In Demo");
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case STRING_ID_Language:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case STRING_ID_Manufacturer:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case STRING_ID_Product:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

View file

@ -1,106 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <avr/pgmspace.h>
#include "Config/AppConfig.h"
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1)
/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
#define AUDIO_STREAM_EPSIZE 256
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
USB_Audio_Descriptor_InputTerminal_t Audio_InputTerminal;
USB_Audio_Descriptor_OutputTerminal_t Audio_OutputTerminal;
// Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface_Alt0;
USB_Descriptor_Interface_t Audio_StreamInterface_Alt1;
USB_Audio_Descriptor_Interface_AS_t Audio_StreamInterface_SPC;
USB_Audio_Descriptor_Format_t Audio_AudioFormat;
USB_Audio_SampleFreq_t Audio_AudioFormatSampleRates[5];
USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
} USB_Descriptor_Configuration_t;
/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
* should have a unique ID index associated with it, which can be used to refer to the
* interface from other descriptors.
*/
enum InterfaceDescriptors_t
{
INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
INTERFACE_ID_AudioStream = 1, /**< Audio stream interface descriptor ID */
};
/** Enum for the device string descriptor IDs within the device. Each string descriptor should
* have a unique ID index associated with it, which can be used to refer to the string from
* other descriptors.
*/
enum StringDescriptors_t
{
STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */
STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
STRING_ID_Product = 2, /**< Product string ID */
};
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

View file

@ -1,52 +0,0 @@
<asf xmlversion="1.0">
<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8">
<require idref="lufa.demos.device.class.audio_input"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)">
<info type="description" value="summary">
Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Class Driver APIs"/>
<keyword value="USB Device"/>
<keyword value="Audio Class"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="AudioInput.txt"/>
<build type="c-source" value="AudioInput.c"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="AudioInput.h"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.peripheral.adc"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
<require idref="lufa.drivers.board.buttons"/>
</module>
</asf>

View file

@ -1,38 +0,0 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = AudioInput
SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
LD_FLAGS =
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_dfu.mk
include $(LUFA_PATH)/Build/lufa_hid.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk

View file

@ -1,311 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the AudioOutput demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "AudioOutput.h"
/** LUFA Audio Class driver interface configuration and state information. This structure is
* passed to all Audio Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
{
.Config =
{
.ControlInterfaceNumber = INTERFACE_ID_AudioControl,
.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
.DataOUTEndpoint =
{
.Address = AUDIO_STREAM_EPADDR,
.Size = AUDIO_STREAM_EPSIZE,
.Banks = 2,
},
},
};
/** Current audio sampling frequency of the streaming audio endpoint. */
static uint32_t CurrentAudioSampleFrequency = 48000;
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
GlobalInterruptEnable();
for (;;)
{
Audio_Device_USBTask(&Speaker_Audio_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();
USB_Init();
}
/** ISR to handle the reloading of the PWM timer with the next sample. */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Check that the USB bus is ready for the next sample to read */
if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
{
/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
int8_t LeftSample_8Bit = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
int8_t RightSample_8Bit = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
/* Mix the two channels together to produce a mono, 8-bit sample */
int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
#if defined(AUDIO_OUT_MONO)
/* Load the sample into the PWM timer channel */
OCR3A = (MixedSample_8Bit ^ (1 << 7));
#elif defined(AUDIO_OUT_STEREO)
/* Load the dual 8-bit samples into the PWM timer channels */
OCR3A = (LeftSample_8Bit ^ (1 << 7));
OCR3B = (RightSample_8Bit ^ (1 << 7));
#elif defined(AUDIO_OUT_PORTC)
/* Load the 8-bit mixed sample into PORTC */
PORTC = MixedSample_8Bit;
#endif
uint8_t LEDMask = LEDS_NO_LEDS;
/* Turn on LEDs as the sample amplitude increases */
if (MixedSample_8Bit > 16)
LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
else if (MixedSample_8Bit > 8)
LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
else if (MixedSample_8Bit > 4)
LEDMask = (LEDS_LED1 | LEDS_LED2);
else if (MixedSample_8Bit > 2)
LEDMask = (LEDS_LED1);
LEDs_SetAllLEDs(LEDMask);
}
Endpoint_SelectEndpoint(PrevEndpoint);
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
/* Sample reload timer initialization */
TIMSK0 = (1 << OCIE0A);
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
#if defined(AUDIO_OUT_MONO)
/* Set speaker as output */
DDRC |= (1 << 6);
#elif defined(AUDIO_OUT_STEREO)
/* Set speakers as outputs */
DDRC |= ((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
/* Set PORTC as outputs */
DDRC |= 0xFF;
#endif
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
/* PWM speaker timer initialization */
TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
| (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed
#endif
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
/* Stop the sample reload timer */
TCCR0B = 0;
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
/* Stop the PWM generation timer */
TCCR3B = 0;
#endif
#if defined(AUDIO_OUT_MONO)
/* Set speaker as input to reduce current draw */
DDRC &= ~(1 << 6);
#elif defined(AUDIO_OUT_STEREO)
/* Set speakers as inputs to reduce current draw */
DDRC &= ~((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
/* Set PORTC low */
PORTC = 0x00;
#endif
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Speaker_Audio_Interface);
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Control Request reception event. */
void EVENT_USB_Device_ControlRequest(void)
{
Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
}
/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio endpoints.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] EndpointProperty Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
* \param[in] EndpointAddress Address of the streaming endpoint whose property is being referenced.
* \param[in] EndpointControl Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean \c true if the property get/set was successful, \c false otherwise
*/
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data)
{
/* Check the requested endpoint to see if a supported endpoint is being manipulated */
if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address)
{
/* Check the requested control to see if a supported control is being manipulated */
if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
{
switch (EndpointProperty)
{
case AUDIO_REQ_SetCurrent:
/* Check if we are just testing for a valid property, or actually adjusting it */
if (DataLength != NULL)
{
/* Set the new sampling frequency to the value given by the host */
CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
/* Adjust sample reload timer to the new frequency */
OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
}
return true;
case AUDIO_REQ_GetCurrent:
/* Check if we are just testing for a valid property, or actually reading it */
if (DataLength != NULL)
{
*DataLength = 3;
Data[2] = (CurrentAudioSampleFrequency >> 16);
Data[1] = (CurrentAudioSampleFrequency >> 8);
Data[0] = (CurrentAudioSampleFrequency & 0xFF);
}
return true;
}
}
}
return false;
}
/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
* in the user application to handle property manipulations on streaming audio interfaces.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
* to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
* \param[in] Property Property of the interface to get or set, a value from Audio_ClassRequests_t.
* \param[in] EntityAddress Address of the audio entity whose property is being referenced.
* \param[in] Parameter Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
* \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
* length of the retrieved data. When NULL, the function should return whether the given property
* and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
* \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
* the retrieved data is to be stored for GET operations.
*
* \return Boolean \c true if the property GET/SET was successful, \c false otherwise
*/
bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t Property,
const uint8_t EntityAddress,
const uint16_t Parameter,
uint16_t* const DataLength,
uint8_t* Data)
{
/* No audio interface entities in the device descriptor, thus no properties to get or set. */
return false;
}

View file

@ -1,87 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for AudioOutput.c.
*/
#ifndef _AUDIO_OUTPUT_H_
#define _AUDIO_OUTPUT_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdlib.h>
#include "Descriptors.h"
#include "Config/AppConfig.h"
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t EndpointProperty,
const uint8_t EndpointAddress,
const uint8_t EndpointControl,
uint16_t* const DataLength,
uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
const uint8_t Property,
const uint8_t EntityAddress,
const uint16_t Parameter,
uint16_t* const DataLength,
uint8_t* Data);
#endif

View file

@ -1,92 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Audio Output Device Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Standard Audio Device</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Audio 1.0 Class Specification \n
* USBIF Audio 1.0 Class Terminal Types Specification \n
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Audio demonstration application. This gives a simple reference
* application for implementing a USB Audio Output device using the
* basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function
* as a USB speaker. Outgoing audio will output in 8-bit PWM onto
* the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
* timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
* mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
* the board LEDs in all modes. Decouple audio outputs with a capacitor and
* attach to a speaker to hear the audio.
*
* Under Windows, if a driver request dialogue pops up, select the option
* to automatically install the appropriate drivers.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <th><b>Define Name:</b></th>
* <th><b>Location:</b></th>
* <th><b>Description:</b></th>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
* <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
* <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
* <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
* </table>
*/

View file

@ -1,50 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Application Configuration Header File
*
* This is a header file which is be used to configure some of
* the application's compile time options, as an alternative to
* specifying the compile time constants supplied through a
* makefile or build system.
*
* For information on what each token does, refer to the
* \ref Sec_Options section of the application documentation.
*/
#ifndef _APP_CONFIG_H_
#define _APP_CONFIG_H_
#define AUDIO_OUT_STEREO
// #define AUDIO_OUT_MONO
// #define AUDIO_OUT_PORTC
#endif

View file

@ -1,93 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
// #define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
#define USB_DEVICE_ONLY
// #define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif

View file

@ -1,312 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(2,0,0),
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2046,
.ReleaseNumber = VERSION_BCD(0,0,2),
.ManufacturerStrIndex = STRING_ID_Manufacturer,
.ProductStrIndex = STRING_ID_Product,
.SerialNumStrIndex = NO_DESCRIPTOR,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.Audio_ControlInterface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioControl,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_ControlSubclass,
.Protocol = AUDIO_CSCP_ControlProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_ControlInterface_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_Header,
.ACSpecification = VERSION_BCD(1,0,0),
.TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
sizeof(USB_Audio_Descriptor_InputTerminal_t) +
sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
.InCollection = 1,
.InterfaceNumber = INTERFACE_ID_AudioStream,
},
.Audio_InputTerminal =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.TerminalID = 0x01,
.TerminalType = AUDIO_TERMINAL_STREAMING,
.AssociatedOutputTerminal = 0x00,
.TotalChannels = 2,
.ChannelConfig = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT),
.ChannelStrIndex = NO_DESCRIPTOR,
.TerminalStrIndex = NO_DESCRIPTOR
},
.Audio_OutputTerminal =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.TerminalID = 0x02,
.TerminalType = AUDIO_TERMINAL_OUT_SPEAKER,
.AssociatedInputTerminal = 0x00,
.SourceID = 0x01,
.TerminalStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_Alt0 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioStream,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_AudioStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_Alt1 =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioStream,
.AlternateSetting = 1,
.TotalEndpoints = 1,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_AudioStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_General,
.TerminalLink = 0x01,
.FrameDelay = 1,
.AudioFormat = 0x0001
},
.Audio_AudioFormat =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
.Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType,
.FormatType = 0x01,
.Channels = 0x02,
.SubFrameSize = 0x02,
.BitResolution = 16,
.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
},
.Audio_AudioFormatSampleRates =
{
AUDIO_SAMPLE_FREQ(8000),
AUDIO_SAMPLE_FREQ(11025),
AUDIO_SAMPLE_FREQ(22050),
AUDIO_SAMPLE_FREQ(44100),
AUDIO_SAMPLE_FREQ(48000),
},
.Audio_StreamEndpoint =
{
.Endpoint =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = AUDIO_STREAM_EPADDR,
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 0x01
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.Audio_StreamEndpoint_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.Attributes = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
}
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio Out Demo");
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case STRING_ID_Language:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case STRING_ID_Manufacturer:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case STRING_ID_Product:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

View file

@ -1,106 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <avr/pgmspace.h>
#include "Config/AppConfig.h"
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1)
/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
#define AUDIO_STREAM_EPSIZE 256
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
USB_Audio_Descriptor_InputTerminal_t Audio_InputTerminal;
USB_Audio_Descriptor_OutputTerminal_t Audio_OutputTerminal;
// Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface_Alt0;
USB_Descriptor_Interface_t Audio_StreamInterface_Alt1;
USB_Audio_Descriptor_Interface_AS_t Audio_StreamInterface_SPC;
USB_Audio_Descriptor_Format_t Audio_AudioFormat;
USB_Audio_SampleFreq_t Audio_AudioFormatSampleRates[5];
USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
} USB_Descriptor_Configuration_t;
/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
* should have a unique ID index associated with it, which can be used to refer to the
* interface from other descriptors.
*/
enum InterfaceDescriptors_t
{
INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
INTERFACE_ID_AudioStream = 1, /**< Audio stream interface descriptor ID */
};
/** Enum for the device string descriptor IDs within the device. Each string descriptor should
* have a unique ID index associated with it, which can be used to refer to the string from
* other descriptors.
*/
enum StringDescriptors_t
{
STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */
STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
STRING_ID_Product = 2, /**< Product string ID */
};
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

View file

@ -1,50 +0,0 @@
<asf xmlversion="1.0">
<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8">
<require idref="lufa.demos.device.class.audio_output"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)">
<info type="description" value="summary">
Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Class Driver APIs"/>
<keyword value="USB Device"/>
<keyword value="Audio Class"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>
<build type="c-source" value="AudioOutput.c"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="AudioOutput.h"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

View file

@ -1,38 +0,0 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = AudioOutput
SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
LD_FLAGS =
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_dfu.mk
include $(LUFA_PATH)/Build/lufa_hid.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk

View file

@ -1,126 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
// #define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
#define USB_DEVICE_ONLY
// #define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif

View file

@ -1,366 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(1,1,0),
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x206D,
.ReleaseNumber = VERSION_BCD(0,0,2),
.ManufacturerStrIndex = STRING_ID_Manufacturer,
.ProductStrIndex = STRING_ID_Product,
.SerialNumStrIndex = NO_DESCRIPTOR,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.Audio_ControlInterface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioControl,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_ControlSubclass,
.Protocol = AUDIO_CSCP_ControlProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_ControlInterface_SPC =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_Header,
.ACSpecification = VERSION_BCD(1,0,0),
.TotalLength = sizeof(USB_Audio_Descriptor_Interface_AC_t),
.InCollection = 1,
.InterfaceNumber = INTERFACE_ID_AudioStream,
},
.Audio_StreamInterface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = INTERFACE_ID_AudioStream,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_MIDIStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_SPC =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_General,
.AudioSpecification = VERSION_BCD(1,0,0),
.TotalLength = (sizeof(USB_Descriptor_Configuration_t) -
offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
},
.MIDI_In_Jack_Emb =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x01,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Emb2 =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x02,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Ext =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x03,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Ext2 =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x04,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Emb =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x05,
.NumberOfPins = 1,
.SourceJackID = {0x03},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Emb2 =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x06,
.NumberOfPins = 1,
.SourceJackID = {0x04},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Ext =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x07,
.NumberOfPins = 1,
.SourceJackID = {0x01},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Ext2 =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x08,
.NumberOfPins = 1,
.SourceJackID = {0x02},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Endpoint =
{
.Endpoint =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = MIDI_STREAM_OUT_EPADDR,
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x05
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.MIDI_In_Jack_Endpoint_SPC =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.TotalEmbeddedJacks = 0x02,
.AssociatedJackID = {0x01, 0x02}
},
.MIDI_Out_Jack_Endpoint =
{
.Endpoint =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = MIDI_STREAM_IN_EPADDR,
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x05
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.MIDI_Out_Jack_Endpoint_SPC =
{
.Header = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.TotalEmbeddedJacks = 0x02,
.AssociatedJackID = {0x05, 0x06}
}
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual MIDI Demo");
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case STRING_ID_Language:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case STRING_ID_Manufacturer:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case STRING_ID_Product:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

View file

@ -1,124 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <avr/pgmspace.h>
/* Macros: */
/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
#define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2)
/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
#define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 1)
/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
#define MIDI_STREAM_EPSIZE 64
/* Type Defines: */
/** Type define for a dual jack endpoint descriptor. This is identical to the LUFA MIDI class driver's
* USB_MIDI_Descriptor_Jack_Endpoint_t, except that it contains two jack association entries.
*/
typedef struct
{
USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
uint8_t TotalEmbeddedJacks; /**< Total number of jacks inside this endpoint. */
uint8_t AssociatedJackID[2]; /**< IDs of each jack inside the endpoint. */
} ATTR_PACKED USB_MIDI_Descriptor_DualJack_Endpoint_t;
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// MIDI Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
// MIDI Audio Streaming Interface
USB_Descriptor_Interface_t Audio_StreamInterface;
USB_MIDI_Descriptor_AudioInterface_AS_t Audio_StreamInterface_SPC;
USB_MIDI_Descriptor_InputJack_t MIDI_In_Jack_Emb;
USB_MIDI_Descriptor_InputJack_t MIDI_In_Jack_Emb2;
USB_MIDI_Descriptor_InputJack_t MIDI_In_Jack_Ext;
USB_MIDI_Descriptor_InputJack_t MIDI_In_Jack_Ext2;
USB_MIDI_Descriptor_OutputJack_t MIDI_Out_Jack_Emb;
USB_MIDI_Descriptor_OutputJack_t MIDI_Out_Jack_Emb2;
USB_MIDI_Descriptor_OutputJack_t MIDI_Out_Jack_Ext;
USB_MIDI_Descriptor_OutputJack_t MIDI_Out_Jack_Ext2;
USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
USB_MIDI_Descriptor_DualJack_Endpoint_t MIDI_In_Jack_Endpoint_SPC;
USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
USB_MIDI_Descriptor_DualJack_Endpoint_t MIDI_Out_Jack_Endpoint_SPC;
} USB_Descriptor_Configuration_t;
/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
* should have a unique ID index associated with it, which can be used to refer to the
* interface from other descriptors.
*/
enum InterfaceDescriptors_t
{
INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
INTERFACE_ID_AudioStream = 1, /**< Audio streaming interface descriptor ID */
};
/** Enum for the device string descriptor IDs within the device. Each string descriptor should
* have a unique ID index associated with it, which can be used to refer to the string from
* other descriptors.
*/
enum StringDescriptors_t
{
STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */
STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
STRING_ID_Product = 2, /**< Product string ID */
};
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

View file

@ -1,211 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the Dual MIDI demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "DualMIDI.h"
/** LUFA MIDI Class driver interface configuration and state information. This structure is
* passed to all MIDI Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
{
.Config =
{
.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
.DataINEndpoint =
{
.Address = MIDI_STREAM_IN_EPADDR,
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
.DataOUTEndpoint =
{
.Address = MIDI_STREAM_OUT_EPADDR,
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
},
};
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
GlobalInterruptEnable();
for (;;)
{
CheckJoystickMovement();
MIDI_EventPacket_t ReceivedMIDIEvent;
while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
{
if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
else
LEDs_SetAllLEDs(LEDS_NO_LEDS);
}
MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();
LEDs_Init();
Buttons_Init();
USB_Init();
}
/** Checks for changes in the position of the board joystick, sending MIDI events to the host upon each change. */
void CheckJoystickMovement(void)
{
static uint8_t PrevJoystickStatus;
uint8_t MIDICommand = 0;
uint8_t MIDIPitch;
/* Get current joystick mask, XOR with previous to detect joystick changes */
uint8_t JoystickStatus = Joystick_GetStatus();
uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
/* Get board button status - if pressed use second virtual cable, otherwise use the first */
uint8_t VirtualCable = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? 1 : 0;
if (JoystickChanges & JOY_LEFT)
{
MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
MIDIPitch = 0x3C;
}
if (JoystickChanges & JOY_UP)
{
MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
MIDIPitch = 0x3D;
}
if (JoystickChanges & JOY_RIGHT)
{
MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
MIDIPitch = 0x3E;
}
if (JoystickChanges & JOY_DOWN)
{
MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
MIDIPitch = 0x3F;
}
if (JoystickChanges & JOY_PRESS)
{
MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
MIDIPitch = 0x3B;
}
if (MIDICommand)
{
MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
{
.Event = MIDI_EVENT(VirtualCable, MIDICommand),
.Data1 = MIDICommand | MIDI_CHANNEL(1),
.Data2 = MIDIPitch,
.Data3 = MIDI_STANDARD_VELOCITY,
};
MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
MIDI_Device_Flush(&Keyboard_MIDI_Interface);
}
PrevJoystickStatus = JoystickStatus;
}
/** Event handler for the library USB Connection event. */
void EVENT_USB_Device_Connect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the library USB Disconnection event. */
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the library USB Control Request reception event. */
void EVENT_USB_Device_ControlRequest(void)
{
MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
}

View file

@ -1,78 +0,0 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for DualMIDI.c.
*/
#ifndef _DUAL_MIDI_H_
#define _DUAL_MIDI_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <string.h>
#include "Descriptors.h"
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void CheckJoystickMovement(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
#endif

Some files were not shown because too many files have changed in this diff Show more