1
0
Fork 0

readme update to wanleg layout (#3266)

This commit is contained in:
wanleg 2018-06-30 06:35:45 -07:00 committed by Drashna Jaelre
parent 701fed2e15
commit dca2c2a439

View file

@ -70,8 +70,10 @@ On a Gherkin, B4/F7 corresponds to the top-left corner key.
You can add `#define QMK_SPEAKER C6` if you have a speaker hooked up to pin C6. The Gherkin PCB already uses pin C6 in its switch layout, so you cannot use a speaker on a standard Gherkin.
4. Also, you should add `BOOTLOADER = qmk-dfu` to your `rules.mk` file, so it is flagged properly. Again, this is already set up in `qmk_firmware/keyboards/gherkin/wanleg`.
5. Once you've made the required edits, it's time to compile the firmware. If you use the `:production` target when compiling, it will produce the usual `.hex` file as well as `_bootloader.hex` and `_production.hex` files. The `_production.hex` will be what we want. This contains the bootloader and the firmware, so we only have to flash once (rather than flash the bootloader, and THEN flash the firmware).
For example:
`make gherkin/qmkdfu:wanleg:production`
For example
`make <keyboard>:<keymap>:production`
For my particular keymap, for reasons listed in the **Using QMK DFU** section, you should use the following to ensure the bootloader is set properly
`make gherkin:wanleg:production dfu=qmk`
## Burn QMK DFU
6. Navigate to the directory with your `_production.hex` file, and burn it with the following command