Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
commit
dfba286076
63 changed files with 3293 additions and 0 deletions
25
keyboards/sawnsprojects/krush/krush60/readme.md
Normal file
25
keyboards/sawnsprojects/krush/krush60/readme.md
Normal file
|
@ -0,0 +1,25 @@
|
|||
# Krush60
|
||||
|
||||
A 60% keyboard sold in several variants.
|
||||
|
||||
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
|
||||
|
||||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
||||
|
||||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
|
||||
* Hardware Availability: [Mechkey.store](https://mechkey.store/)
|
||||
|
||||
Make examples for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush/krush60/solder:default
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
60
keyboards/sawnsprojects/krush/krush60/solder/config.h
Normal file
60
keyboards/sawnsprojects/krush/krush60/solder/config.h
Normal file
|
@ -0,0 +1,60 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5350
|
||||
#define PRODUCT_ID 0x6B32
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER SawnsProjects
|
||||
#define PRODUCT Krush60 - Solder
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
/* Caps Lock */
|
||||
#define LED_CAPS_LOCK_PIN F0
|
||||
|
||||
#define RGB_DI_PIN F1
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
1274
keyboards/sawnsprojects/krush/krush60/solder/info.json
Normal file
1274
keyboards/sawnsprojects/krush/krush60/solder/info.json
Normal file
File diff suppressed because it is too large
Load diff
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder full layout
|
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_7u_spc(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi 7U
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_7u_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi 7U arrow
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow split backspace
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs_7u_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow, 7u spacebar & split backspace
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow, split spacebar & split backspace
|
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow & split spacebar
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split backspace
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL),
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout 7u spacebar & split backspace
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[1] = LAYOUT_60_ansi_split_bs_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split spacebar & split backspace
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[1] = LAYOUT_60_ansi_split_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split backspace
|
|
@ -0,0 +1,36 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_tsangan(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_tsangan(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder Tsangan
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_tsangan_split_bs(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_tsangan_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder Tsangan & split backspace
|
|
@ -0,0 +1,40 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
|
||||
* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
|
||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
|
||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
|
||||
* │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
|
||||
* │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
|
||||
*/
|
||||
[0] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
|
||||
)
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap default for krush60
|
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(0), KC_LEFT, KC_LALT, KC_LCTL
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap VIA for krush60
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
15
keyboards/sawnsprojects/krush/krush60/solder/readme.md
Normal file
15
keyboards/sawnsprojects/krush/krush60/solder/readme.md
Normal file
|
@ -0,0 +1,15 @@
|
|||
# Krush60 solder
|
||||
|
||||
![Krush60](https://cdn.discordapp.com/attachments/898507964942536715/906171092916391956/252763374_2899749087003964_8763371038132517512_n.png)
|
||||
|
||||
A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674).
|
||||
|
||||
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: 60% keyboard case
|
||||
* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush60/solder:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
22
keyboards/sawnsprojects/krush/krush60/solder/rules.mk
Normal file
22
keyboards/sawnsprojects/krush/krush60/solder/rules.mk
Normal file
|
@ -0,0 +1,22 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
|
||||
LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc
|
17
keyboards/sawnsprojects/krush/krush60/solder/solder.c
Normal file
17
keyboards/sawnsprojects/krush/krush60/solder/solder.c
Normal file
|
@ -0,0 +1,17 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "solder.h"
|
335
keyboards/sawnsprojects/krush/krush60/solder/solder.h
Normal file
335
keyboards/sawnsprojects/krush/krush60/solder/solder.h
Normal file
|
@ -0,0 +1,335 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
//x
|
||||
#define LAYOUT_all( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
|
||||
//LAYOUT_60_ansi
|
||||
//x
|
||||
#define LAYOUT_60_ansi( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_iso
|
||||
//x
|
||||
#define LAYOUT_60_iso(\
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_bs
|
||||
#define LAYOUT_60_ansi_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_spc
|
||||
#define LAYOUT_60_ansi_split_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_bs_spc
|
||||
#define LAYOUT_60_ansi_split_bs_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_7u_spc
|
||||
#define LAYOUT_60_ansi_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_7u_spc
|
||||
#define LAYOUT_60_ansi_split_bs_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_bs
|
||||
#define LAYOUT_60_ansi_arrow_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_bs_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_bs_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_7u_spc
|
||||
#define LAYOUT_60_ansi_arrow_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow
|
||||
//x
|
||||
#define LAYOUT_60_ansi_arrow( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//x
|
||||
//LAYOUT_60_ansi_arrow_split_bs_7u_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_bs_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_tsangan
|
||||
#define LAYOUT_60_ansi_tsangan( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_tsangan_split_bs
|
||||
#define LAYOUT_60_ansi_tsangan_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_iso_tsangan
|
||||
#define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan
|
||||
//LAYOUT_60_iso_tsangan_split_bs
|
||||
#define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs
|
||||
|
||||
|
25
keyboards/sawnsprojects/krush/krush65/readme.md
Normal file
25
keyboards/sawnsprojects/krush/krush65/readme.md
Normal file
|
@ -0,0 +1,25 @@
|
|||
# Krush65
|
||||
|
||||
A 65% keyboard sold in several variants.
|
||||
|
||||
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case.
|
||||
|
||||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
||||
|
||||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: Krush65
|
||||
* Hardware Availability: [Mechkey.store](https://mechkey.store/)
|
||||
|
||||
Make examples for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush/krush65/solder:default
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
68
keyboards/sawnsprojects/krush/krush65/solder/config.h
Normal file
68
keyboards/sawnsprojects/krush/krush65/solder/config.h
Normal file
|
@ -0,0 +1,68 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5350
|
||||
#define PRODUCT_ID 0x6B31
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER SawnsProjects
|
||||
#define PRODUCT Krush65 - Solder
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* indicator */
|
||||
// #define LED_CAPS_LOCK_PIN F0
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
/* Caps Lock */
|
||||
#define LED_CAPS_LOCK_PIN F0
|
||||
|
||||
/* rotary */
|
||||
#define ENCODERS_PAD_A { D0 }
|
||||
#define ENCODERS_PAD_B { B3 }
|
||||
#define ENCODER_RESOLUTION 4
|
||||
|
||||
#define RGB_DI_PIN F1
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
|
@ -0,0 +1,58 @@
|
|||
/* Copyright 2020 Neil Brian Ramirez
|
||||
* Copyright 2021 drashna jael're (@drashna)
|
||||
* Copyright 2021 uybv
|
||||
* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "encoder_actions.h"
|
||||
|
||||
#ifdef ENCODER_ENABLE
|
||||
|
||||
# ifdef ENCODERS
|
||||
static uint8_t encoder_state[ENCODERS] = {0};
|
||||
static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
|
||||
static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
|
||||
# endif
|
||||
|
||||
void encoder_action_unregister(void) {
|
||||
# ifdef ENCODERS
|
||||
for (int index = 0; index < ENCODERS; ++index) {
|
||||
if (encoder_state[index]) {
|
||||
keyevent_t encoder_event = (keyevent_t) {
|
||||
.key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
|
||||
.pressed = false,
|
||||
.time = (timer_read() | 1)
|
||||
};
|
||||
encoder_state[index] = 0;
|
||||
action_exec(encoder_event);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
}
|
||||
|
||||
void encoder_action_register(uint8_t index, bool clockwise) {
|
||||
# ifdef ENCODERS
|
||||
keyevent_t encoder_event = (keyevent_t) {
|
||||
.key = clockwise ? encoder_cw[index] : encoder_ccw[index],
|
||||
.pressed = true,
|
||||
.time = (timer_read() | 1)
|
||||
};
|
||||
encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
|
||||
action_exec(encoder_event);
|
||||
# endif
|
||||
}
|
||||
|
||||
#endif
|
|
@ -0,0 +1,21 @@
|
|||
/* Copyright 2020 Neil Brian Ramirez
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
void encoder_action_unregister(void);
|
||||
|
||||
void encoder_action_register(uint8_t index, bool clockwise);
|
299
keyboards/sawnsprojects/krush/krush65/solder/info.json
Normal file
299
keyboards/sawnsprojects/krush/krush65/solder/info.json
Normal file
|
@ -0,0 +1,299 @@
|
|||
{
|
||||
"keyboard_name": "Krush65 Solder",
|
||||
"url": "",
|
||||
"maintainer": "MaiTheSan",
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 },
|
||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 },
|
||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 },
|
||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 },
|
||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 },
|
||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 },
|
||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 },
|
||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 },
|
||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 },
|
||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 },
|
||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 },
|
||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 },
|
||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 },
|
||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 },
|
||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 },
|
||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 },
|
||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
|
||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
|
||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
|
||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
|
||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
|
||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
|
||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
|
||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
|
||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
|
||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
|
||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
|
||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
|
||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
|
||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
|
||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 },
|
||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
|
||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
|
||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
|
||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
|
||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
|
||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
|
||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
|
||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
|
||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
|
||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
|
||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
|
||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
|
||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
|
||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 },
|
||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
|
||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
|
||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
|
||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
|
||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
|
||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
|
||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
|
||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
|
||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
|
||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
|
||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
|
||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
|
||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 },
|
||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 },
|
||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
|
||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
|
||||
{ "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 },
|
||||
{ "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 },
|
||||
{ "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 },
|
||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
|
||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 },
|
||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 },
|
||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 }
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_ansi_blocker_split_bs_sp": {
|
||||
"layout": [
|
||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 },
|
||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 },
|
||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 },
|
||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 },
|
||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 },
|
||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 },
|
||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 },
|
||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 },
|
||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 },
|
||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 },
|
||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 },
|
||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 },
|
||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 },
|
||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 },
|
||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 },
|
||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 },
|
||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
|
||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
|
||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
|
||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
|
||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
|
||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
|
||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
|
||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
|
||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
|
||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
|
||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
|
||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
|
||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
|
||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
|
||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 },
|
||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
|
||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
|
||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
|
||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
|
||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
|
||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
|
||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
|
||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
|
||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
|
||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
|
||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
|
||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
|
||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
|
||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 },
|
||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
|
||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
|
||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
|
||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
|
||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
|
||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
|
||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
|
||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
|
||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
|
||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
|
||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
|
||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
|
||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 },
|
||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 },
|
||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
|
||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
|
||||
{ "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 },
|
||||
{ "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 },
|
||||
{ "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 },
|
||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
|
||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 },
|
||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 },
|
||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 }
|
||||
]
|
||||
},
|
||||
|
||||
"LAYOUT_65_ansi_blocker": {
|
||||
"layout": [
|
||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 },
|
||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 },
|
||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 },
|
||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 },
|
||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 },
|
||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 },
|
||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 },
|
||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 },
|
||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 },
|
||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 },
|
||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 },
|
||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 },
|
||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 },
|
||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0, "w": 2 },
|
||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 },
|
||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
|
||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
|
||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
|
||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
|
||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
|
||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
|
||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
|
||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
|
||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
|
||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
|
||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
|
||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
|
||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
|
||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
|
||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 },
|
||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
|
||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
|
||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
|
||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
|
||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
|
||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
|
||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
|
||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
|
||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
|
||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
|
||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
|
||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
|
||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
|
||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 },
|
||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
|
||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
|
||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
|
||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
|
||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
|
||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
|
||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
|
||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
|
||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
|
||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
|
||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
|
||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
|
||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 },
|
||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 },
|
||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
|
||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
|
||||
{ "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 },
|
||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
|
||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 },
|
||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 },
|
||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 }
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_ansi_blocker_split_bs": {
|
||||
"layout": [
|
||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 },
|
||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 },
|
||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 },
|
||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 },
|
||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 },
|
||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 },
|
||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 },
|
||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 },
|
||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 },
|
||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 },
|
||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 },
|
||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 },
|
||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 },
|
||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 },
|
||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 },
|
||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 },
|
||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
|
||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
|
||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
|
||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
|
||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
|
||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
|
||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
|
||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
|
||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
|
||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
|
||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
|
||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
|
||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
|
||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
|
||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 },
|
||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
|
||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
|
||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
|
||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
|
||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
|
||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
|
||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
|
||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
|
||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
|
||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
|
||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
|
||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
|
||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
|
||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 },
|
||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
|
||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
|
||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
|
||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
|
||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
|
||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
|
||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
|
||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
|
||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
|
||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
|
||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
|
||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
|
||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 },
|
||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 },
|
||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
|
||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
|
||||
{ "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 },
|
||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
|
||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
|
||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 },
|
||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 },
|
||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 }
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
|
@ -0,0 +1,39 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[0] = LAYOUT_65_ansi_blocker(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SPC, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_65_ansi_blocker(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush65 solder layout ansi blocker
|
|
@ -0,0 +1,38 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[0] = LAYOUT_65_ansi_blocker_split_bs_sp(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_65_ansi_blocker_split_bs_sp(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush65 solder layout ansi blocker with split backspace and split spacebar
|
|
@ -0,0 +1,39 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
|
||||
[0] = LAYOUT_65_ansi_blocker_split_bs(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_65_ansi_blocker_split_bs(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush65 solder layout ansi blocker with split backspace
|
|
@ -0,0 +1,39 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_all(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for krush65 solder
|
|
@ -0,0 +1,75 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_all(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
|
||||
bool encoder_update_user(uint8_t index, bool clockwise) {
|
||||
if (index == 0) {
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case 0:
|
||||
// main layer - move mouse right (CW) and left (CCW)
|
||||
if (clockwise) {
|
||||
tap_code_delay(KC_VOLU, 10);
|
||||
} else {
|
||||
tap_code_delay(KC_VOLD, 10);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
// other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW)
|
||||
if (clockwise) {
|
||||
tap_code16(C(KC_EQL));
|
||||
} else {
|
||||
tap_code16(C(KC_MINS));
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
|
@ -0,0 +1 @@
|
|||
#custom keymap for MikeTheSan
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
|
@ -0,0 +1,51 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_all(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
|
@ -0,0 +1 @@
|
|||
# The VIA keymap for krush65 solder
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
15
keyboards/sawnsprojects/krush/krush65/solder/readme.md
Normal file
15
keyboards/sawnsprojects/krush/krush65/solder/readme.md
Normal file
|
@ -0,0 +1,15 @@
|
|||
# Krush65 solder
|
||||
|
||||
![Krush65](https://cdn.shopify.com/s/files/1/0299/9497/5365/files/4_-_2BS9fH2_2048x2048.jpg)
|
||||
|
||||
A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65).
|
||||
|
||||
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: Krush65
|
||||
* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush65/solder:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
23
keyboards/sawnsprojects/krush/krush65/solder/rules.mk
Normal file
23
keyboards/sawnsprojects/krush/krush65/solder/rules.mk
Normal file
|
@ -0,0 +1,23 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
ENCODER_ENABLE = yes
|
||||
|
||||
LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs
|
53
keyboards/sawnsprojects/krush/krush65/solder/solder.c
Normal file
53
keyboards/sawnsprojects/krush/krush65/solder/solder.c
Normal file
|
@ -0,0 +1,53 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "solder.h"
|
||||
#include "encoder_actions.h"
|
||||
|
||||
/* Custom encoder control - handles CW/CCW turning of encoder
|
||||
* Default behavior:
|
||||
* main layer:
|
||||
* CW: move mouse right
|
||||
* CCW: move mouse left
|
||||
* other layers:
|
||||
* CW: = (equals/plus - increase slider in Adobe products)
|
||||
* CCW: - (minus/underscore - decrease slider in adobe products)
|
||||
*/
|
||||
bool encoder_update_kb(uint8_t index, bool clockwise) {
|
||||
if (!encoder_update_user(index, clockwise)) { return false; }
|
||||
if (index == 0) {
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
|
||||
case 0:
|
||||
// main layer - move mouse right (CW) and left (CCW)
|
||||
if (clockwise) {
|
||||
tap_code_delay(KC_VOLU, 10);
|
||||
} else {
|
||||
tap_code_delay(KC_VOLD, 10);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
// other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW)
|
||||
if (clockwise) {
|
||||
tap_code16(C(KC_EQL));
|
||||
} else {
|
||||
tap_code16(C(KC_MINS));
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
93
keyboards/sawnsprojects/krush/krush65/solder/solder.h
Normal file
93
keyboards/sawnsprojects/krush/krush65/solder/solder.h
Normal file
|
@ -0,0 +1,93 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
|
||||
K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
|
||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
|
||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
|
||||
{ K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \
|
||||
{ K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \
|
||||
}
|
||||
#define LAYOUT_65_ansi_blocker( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97, K87 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, KC_NO, KC_NO }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
|
||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
|
||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
|
||||
{ K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \
|
||||
{ K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \
|
||||
}
|
||||
#define LAYOUT_65_ansi_blocker_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97, K87 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
|
||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
|
||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
|
||||
{ K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \
|
||||
{ K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \
|
||||
}
|
||||
#define LAYOUT_65_ansi_blocker_split_bs_sp( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
|
||||
K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
|
||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
|
||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
|
||||
{ K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \
|
||||
{ K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \
|
||||
}
|
||||
|
Loading…
Reference in a new issue