1
0
Fork 0

fixed color detection routine in makefile

This commit is contained in:
IBNobody 2016-06-11 17:24:28 -05:00
parent a3a312f8f4
commit e1590abea9

View file

@ -203,6 +203,28 @@ SCANF_LIB =
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
@ -220,6 +242,40 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
# You can give EXTRALDFLAGS at 'make' command line.
LDFLAGS += $(EXTRALDFLAGS)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
REMOVE = rm -f
@ -330,6 +386,111 @@ sizeafter: $(BUILD_DIR)/$(TARGET).hex
gccversion :
@$(SILENT) || $(CC) --version
# Program the device.
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
$(PROGRAM_CMD)
teensy: $(BUILD_DIR)/$(TARGET).hex
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
flip: $(BUILD_DIR)/$(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
dfu-programmer $(MCU) erase --force
else
dfu-programmer $(MCU) erase
endif
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
dfu-programmer $(MCU) reset
dfu-no-build:
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
dfu-programmer $(MCU) erase --force
else
dfu-programmer $(MCU) erase
endif
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
dfu-programmer $(MCU) reset
dfu-start:
dfu-programmer $(MCU) reset
dfu-programmer $(MCU) start
flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
else
dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
endif
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(BUILD_DIR)/$(TARGET).elf
@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
extcoff: $(BUILD_DIR)/$(TARGET).elf
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)