From e175b8d56f148716de2fbc7d1c31830547e592e4 Mon Sep 17 00:00:00 2001 From: Eric Tang Date: Fri, 17 Jun 2016 17:25:58 -0700 Subject: [PATCH] removes extra dfu erase (#415) --- tmk_core/rules.mk | 56 +++++++++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 29 deletions(-) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 060e4270fa..99ae91b635 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -43,7 +43,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -66,7 +66,7 @@ BUILD_DIR = .build OBJDIR = $(BUILD_DIR)/obj_$(TARGET) -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -229,7 +229,7 @@ endif # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) @@ -245,7 +245,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -257,7 +257,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -269,7 +269,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -330,7 +330,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -364,7 +364,7 @@ endif MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -402,22 +402,22 @@ ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS) ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS) # Default target. -all: - @$(MAKE) begin - @$(MAKE) gccversion - @$(MAKE) sizebefore +all: + @$(MAKE) begin + @$(MAKE) gccversion + @$(MAKE) sizebefore @$(MAKE) clean_list # force clean each time - @$(MAKE) build - @$(MAKE) sizeafter + @$(MAKE) build + @$(MAKE) sizeafter @$(MAKE) end # Quick make that doesn't clean -quick: - @$(MAKE) begin - @$(MAKE) gccversion - @$(MAKE) sizebefore - @$(MAKE) build - @$(MAKE) sizeafter +quick: + @$(MAKE) begin + @$(MAKE) gccversion + @$(MAKE) sizebefore + @$(MAKE) build + @$(MAKE) sizeafter @$(MAKE) end # Change the build target to build a HEX file or a library. @@ -462,12 +462,12 @@ sizeafter: # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi # Display compiler version information. -gccversion : +gccversion : @$(SILENT) || $(CC) --version -# Program the device. +# Program the device. program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(PROGRAM_CMD) @@ -485,7 +485,6 @@ ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) else dfu-programmer $(MCU) erase endif - dfu-programmer $(MCU) erase dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex dfu-programmer $(MCU) reset @@ -495,10 +494,9 @@ ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) else dfu-programmer $(MCU) erase endif - dfu-programmer $(MCU) erase dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex dfu-programmer $(MCU) reset - + dfu-start: dfu-programmer $(MCU) reset dfu-programmer $(MCU) start @@ -520,9 +518,9 @@ endif # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -624,7 +622,7 @@ $(OBJDIR)/%.o : %.c $(OBJDIR)/%.o : %.cpp @mkdir -p $(@D) @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD) - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ @$(BUILD_CMD) # Compile: create assembler files from C source files. @@ -648,7 +646,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ # Target: clean project. clean: begin clean_list end