From 01736a502e8f2900bde229a086a4ab03513f6781 Mon Sep 17 00:00:00 2001 From: climbalima Date: Fri, 18 Nov 2016 23:40:34 -0500 Subject: [PATCH 1/6] just saving --- keyboards/maxipad/Makefile | 2 +- keyboards/maxipad/config.h | 113 ++++---------------- keyboards/maxipad/keymaps/default/Makefile | 21 ---- keyboards/maxipad/keymaps/default/config.h | 8 -- keyboards/maxipad/keymaps/default/keymap.c | 40 ++----- keyboards/maxipad/keymaps/default/readme.md | 1 - keyboards/maxipad/maxipad.c | 29 +---- keyboards/maxipad/maxipad.h | 12 +-- keyboards/maxipad/readme.md | 31 ++---- keyboards/maxipad/rules.mk | 29 ++--- 10 files changed, 54 insertions(+), 232 deletions(-) delete mode 100644 keyboards/maxipad/keymaps/default/Makefile delete mode 100644 keyboards/maxipad/keymaps/default/config.h delete mode 100644 keyboards/maxipad/keymaps/default/readme.md diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile index 57b2ef62e5..4e2a6f00fd 100644 --- a/keyboards/maxipad/Makefile +++ b/keyboards/maxipad/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..a056e4963b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -24,124 +24,49 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot +#define MANUFACTURER wootpatoot #define PRODUCT maxipad #define DESCRIPTION A custom keyboard - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#ifdef USE_PRO_MICRO + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #else + #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #endif /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ +/* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/maxipad/keymaps/default/Makefile b/keyboards/maxipad/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/maxipad/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/config.h b/keyboards/maxipad/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/maxipad/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c index 43ace32419..227cef7d86 100644 --- a/keyboards/maxipad/keymaps/default/keymap.c +++ b/keyboards/maxipad/keymaps/default/keymap.c @@ -1,5 +1,5 @@ #include "maxipad.h" - + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Base */ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, \ @@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC \ ), }; - + const uint16_t PROGMEM fn_actions[] = { - }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/readme.md b/keyboards/maxipad/keymaps/default/readme.md deleted file mode 100644 index a6c0d4a3f0..0000000000 --- a/keyboards/maxipad/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for maxipad \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.c b/keyboards/maxipad/maxipad.c index 879ae86a76..a193b112b9 100644 --- a/keyboards/maxipad/maxipad.c +++ b/keyboards/maxipad/maxipad.c @@ -1,28 +1 @@ -#include "maxipad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} +#include "maxipad.h" \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.h b/keyboards/maxipad/maxipad.h index eee1309ddc..4d8c6428d2 100644 --- a/keyboards/maxipad/maxipad.h +++ b/keyboards/maxipad/maxipad.h @@ -8,18 +8,18 @@ // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, \ - k10, k11, k12, k13, k14, k15, \ - k20, k21, k22, k23, k24, k25, \ - k30, k31, k32, k33, k34, k35, \ - k40, k41, k42, k43, k44, k45 \ + k00, k01, k02, k03, k04, k05, \ + k10, k11, k12, k13, k14, k15, \ + k20, k21, k22, k23, k24, k25, \ + k30, k31, k32, k33, k34, k35, \ + k40, k41, k42, k43, k44, k45 \ ) \ { \ { k00, k01, k02, k03, k04, k05 }, \ { k10, k11, k12, k13, k14, k15 }, \ { k20, k21, k22, k23, k24, k25 }, \ { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45} \ + { k40, k41, k42, k43, k44, k45 } \ } #endif diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 1971ce1f36..4e1702c5ad 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,46 +1,27 @@ -maxipad keyboard firmware +Maxipad keyboard firmware ====================== ## Quantum MK Firmware -<<<<<<< HEAD -For the full Quantum feature list, see [the parent readme](/). -======= -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +For the full Quantum feature list, see [the parent readme.md](/readme.md). ## Building +If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile + Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default - -<<<<<<< HEAD To build with the default keymap, simply run `make default`. -======= -To build with the default keymap, simply run `make`. ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -<<<<<<< HEAD To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` $ make [default|jack|] ``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. -======= -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..e6e5923f16 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -1,3 +1,5 @@ + + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -49,19 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options -# change yes to no to disable +# comment out to disable the options. # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +USE_PRO_MICRO ?= yes \ No newline at end of file From ae66f0d70214b8a5e81ecf5977619bcd4bf6f413 Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:09:11 -0500 Subject: [PATCH 2/6] added plate files for lets split --- keyboards/pilcrow/Makefile | 3 + keyboards/pilcrow/config.h | 162 + keyboards/pilcrow/keymaps/default/Makefile | 21 + keyboards/pilcrow/keymaps/default/config.h | 8 + keyboards/pilcrow/keymaps/default/keymap.c | 88 + keyboards/pilcrow/keymaps/default/readme.md | 1 + keyboards/pilcrow/pilcrow.c | 28 + keyboards/pilcrow/pilcrow.h | 23 + keyboards/pilcrow/readme.md | 28 + keyboards/pilcrow/rules.mk | 67 + keyboards/weebkeeb/Makefile | 3 + keyboards/weebkeeb/aek.dxf | 6486 ++++++++++++++++++ keyboards/weebkeeb/config.h | 162 + keyboards/weebkeeb/keymaps/default/Makefile | 21 + keyboards/weebkeeb/keymaps/default/config.h | 8 + keyboards/weebkeeb/keymaps/default/keymap.c | 119 + keyboards/weebkeeb/keymaps/default/readme.md | 1 + keyboards/weebkeeb/readme.md | 28 + keyboards/weebkeeb/rules.mk | 67 + keyboards/weebkeeb/weebkeeb.c | 28 + keyboards/weebkeeb/weebkeeb.h | 23 + 21 files changed, 7375 insertions(+) create mode 100644 keyboards/pilcrow/Makefile create mode 100644 keyboards/pilcrow/config.h create mode 100644 keyboards/pilcrow/keymaps/default/Makefile create mode 100644 keyboards/pilcrow/keymaps/default/config.h create mode 100644 keyboards/pilcrow/keymaps/default/keymap.c create mode 100644 keyboards/pilcrow/keymaps/default/readme.md create mode 100644 keyboards/pilcrow/pilcrow.c create mode 100644 keyboards/pilcrow/pilcrow.h create mode 100644 keyboards/pilcrow/readme.md create mode 100644 keyboards/pilcrow/rules.mk create mode 100644 keyboards/weebkeeb/Makefile create mode 100644 keyboards/weebkeeb/aek.dxf create mode 100644 keyboards/weebkeeb/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/Makefile create mode 100644 keyboards/weebkeeb/keymaps/default/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/keymap.c create mode 100644 keyboards/weebkeeb/keymaps/default/readme.md create mode 100644 keyboards/weebkeeb/readme.md create mode 100644 keyboards/weebkeeb/rules.mk create mode 100644 keyboards/weebkeeb/weebkeeb.c create mode 100644 keyboards/weebkeeb/weebkeeb.h diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/pilcrow/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h new file mode 100644 index 0000000000..d79c1ba40c --- /dev/null +++ b/keyboards/pilcrow/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT pilcrow +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2, C6, D7, E6 } +#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c new file mode 100644 index 0000000000..e382e4c6ad --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/keymap.c @@ -0,0 +1,88 @@ +#include "pilcrow.h" +#define _______ KC_TRNS +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[1] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ + _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ +), +[2] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ + KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ + _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ +) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md new file mode 100644 index 0000000000..95472dfca8 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c new file mode 100644 index 0000000000..c8243df7bf --- /dev/null +++ b/keyboards/pilcrow/pilcrow.c @@ -0,0 +1,28 @@ +#include "pilcrow.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h new file mode 100644 index 0000000000..7138ccb3f6 --- /dev/null +++ b/keyboards/pilcrow/pilcrow.h @@ -0,0 +1,23 @@ +#ifndef PILCROW_H +#define PILCROW_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ +} + +#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md new file mode 100644 index 0000000000..7a7f6d2af5 --- /dev/null +++ b/keyboards/pilcrow/readme.md @@ -0,0 +1,28 @@ +pilcrow keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/pilcrow/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/weebkeeb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf new file mode 100644 index 0000000000..cfe80946bd --- /dev/null +++ b/keyboards/weebkeeb/aek.dxf @@ -0,0 +1,6486 @@ +0 +SECTION +2 +ENTITIES +0 +LINE +8 +0 +10 +104.7875 +20 +-89.2875 +11 +104.7875 +21 +-91.6875 +0 +LINE +8 +0 +10 +104.7875 +20 +-91.6875 +11 +102.3875 +21 +-91.6875 +0 +LINE +8 +0 +10 +102.3875 +20 +-91.6875 +11 +102.3875 +21 +-89.2875 +0 +LINE +8 +0 +10 +102.3875 +20 +-89.2875 +11 +104.7875 +21 +-89.2875 +0 +LINE +8 +0 +10 +116.8875 +20 +-89.2875 +11 +116.8875 +21 +-91.6875 +0 +LINE +8 +0 +10 +116.8875 +20 +-91.6875 +11 +114.4875 +21 +-91.6875 +0 +LINE +8 +0 +10 +114.4875 +20 +-91.6875 +11 +114.4875 +21 +-89.2875 +0 +LINE +8 +0 +10 +114.4875 +20 +-89.2875 +11 +116.8875 +21 +-89.2875 +0 +CIRCLE +8 +0 +10 +109.6375 +20 +-90.4875 +40 +3.15 +0 +LINE +8 +0 +10 +103.4875 +20 +-94.3875 +11 +103.4875 +21 +-99.4875 +0 +LINE +8 +0 +10 +103.4875 +20 +-99.4875 +11 +100.8875 +21 +-99.4875 +0 +LINE +8 +0 +10 +100.8875 +20 +-99.4875 +11 +100.8875 +21 +-94.3875 +0 +LINE +8 +0 +10 +100.8875 +20 +-94.3875 +11 +103.4875 +21 +-94.3875 +0 +LINE +8 +0 +10 +191.7875 +20 +-94.3875 +11 +191.7875 +21 +-99.4875 +0 +LINE +8 +0 +10 +191.7875 +20 +-99.4875 +11 +194.3875 +21 +-99.4875 +0 +LINE +8 +0 +10 +194.3875 +20 +-99.4875 +11 +194.3875 +21 +-94.3875 +0 +LINE +8 +0 +10 +194.3875 +20 +-94.3875 +11 +191.7875 +21 +-94.3875 +0 +LINE +8 +0 +10 +155.3875 +20 +-84.0875 +11 +139.8875 +21 +-84.0875 +0 +LINE +8 +0 +10 +139.8875 +20 +-84.0875 +11 +139.8875 +21 +-96.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-96.8875 +11 +155.3875 +21 +-96.8875 +0 +LINE +8 +0 +10 +155.3875 +20 +-96.8875 +11 +155.3875 +21 +-84.0875 +0 +LINE +8 +0 +10 +256.28125 +20 +-56.2875 +11 +256.28125 +21 +-61.3875 +0 +LINE +8 +0 +10 +256.28125 +20 +-61.3875 +11 +253.68125 +21 +-61.3875 +0 +LINE +8 +0 +10 +253.68125 +20 +-61.3875 +11 +253.68125 +21 +-56.2875 +0 +LINE +8 +0 +10 +253.68125 +20 +-56.2875 +11 +256.28125 +21 +-56.2875 +0 +LINE +8 +0 +10 +281.88125 +20 +-56.2875 +11 +281.88125 +21 +-61.3875 +0 +LINE +8 +0 +10 +281.88125 +20 +-61.3875 +11 +284.48125 +21 +-61.3875 +0 +LINE +8 +0 +10 +284.48125 +20 +-61.3875 +11 +284.48125 +21 +-56.2875 +0 +LINE +8 +0 +10 +284.48125 +20 +-56.2875 +11 +281.88125 +21 +-56.2875 +0 +LINE +8 +0 +10 +276.83125 +20 +-45.9875 +11 +261.33125 +21 +-45.9875 +0 +LINE +8 +0 +10 +261.33125 +20 +-45.9875 +11 +261.33125 +21 +-58.7875 +0 +LINE +8 +0 +10 +261.33125 +20 +-58.7875 +11 +276.83125 +21 +-58.7875 +0 +LINE +8 +0 +10 +276.83125 +20 +-58.7875 +11 +276.83125 +21 +-45.9875 +0 +LINE +8 +0 +10 +258.6625 +20 +-18.1875 +11 +258.6625 +21 +-23.2875 +0 +LINE +8 +0 +10 +258.6625 +20 +-23.2875 +11 +256.0625 +21 +-23.2875 +0 +LINE +8 +0 +10 +256.0625 +20 +-23.2875 +11 +256.0625 +21 +-18.1875 +0 +LINE +8 +0 +10 +256.0625 +20 +-18.1875 +11 +258.6625 +21 +-18.1875 +0 +LINE +8 +0 +10 +284.2625 +20 +-18.1875 +11 +284.2625 +21 +-23.2875 +0 +LINE +8 +0 +10 +284.2625 +20 +-23.2875 +11 +286.8625 +21 +-23.2875 +0 +LINE +8 +0 +10 +286.8625 +20 +-23.2875 +11 +286.8625 +21 +-18.1875 +0 +LINE +8 +0 +10 +286.8625 +20 +-18.1875 +11 +284.2625 +21 +-18.1875 +0 +LINE +8 +0 +10 +279.2125 +20 +-7.8875 +11 +263.7125 +21 +-7.8875 +0 +LINE +8 +0 +10 +263.7125 +20 +-7.8875 +11 +263.7125 +21 +-20.6875 +0 +LINE +8 +0 +10 +263.7125 +20 +-20.6875 +11 +279.2125 +21 +-20.6875 +0 +LINE +8 +0 +10 +279.2125 +20 +-20.6875 +11 +279.2125 +21 +-7.8875 +0 +LINE +8 +0 +10 +13.39375 +20 +-75.3375 +11 +13.39375 +21 +-80.4375 +0 +LINE +8 +0 +10 +13.39375 +20 +-80.4375 +11 +10.79375 +21 +-80.4375 +0 +LINE +8 +0 +10 +10.79375 +20 +-80.4375 +11 +10.79375 +21 +-75.3375 +0 +LINE +8 +0 +10 +10.79375 +20 +-75.3375 +11 +13.39375 +21 +-75.3375 +0 +LINE +8 +0 +10 +38.99375 +20 +-75.3375 +11 +38.99375 +21 +-80.4375 +0 +LINE +8 +0 +10 +38.99375 +20 +-80.4375 +11 +41.59375 +21 +-80.4375 +0 +LINE +8 +0 +10 +41.59375 +20 +-80.4375 +11 +41.59375 +21 +-75.3375 +0 +LINE +8 +0 +10 +41.59375 +20 +-75.3375 +11 +38.99375 +21 +-75.3375 +0 +LINE +8 +0 +10 +33.94375 +20 +-65.0375 +11 +18.44375 +21 +-65.0375 +0 +LINE +8 +0 +10 +18.44375 +20 +-65.0375 +11 +18.44375 +21 +-77.8375 +0 +LINE +8 +0 +10 +18.44375 +20 +-77.8375 +11 +33.94375 +21 +-77.8375 +0 +LINE +8 +0 +10 +33.94375 +20 +-77.8375 +11 +33.94375 +21 +-65.0375 +0 +LINE +8 +0 +10 +193.4875 +20 +-7.8875 +11 +177.9875 +21 +-7.8875 +0 +LINE +8 +0 +10 +177.9875 +20 +-7.8875 +11 +177.9875 +21 +-20.6875 +0 +LINE +8 +0 +10 +177.9875 +20 +-20.6875 +11 +193.4875 +21 +-20.6875 +0 +LINE +8 +0 +10 +193.4875 +20 +-20.6875 +11 +193.4875 +21 +-7.8875 +0 +LINE +8 +0 +10 +174.4375 +20 +-7.8875 +11 +158.9375 +21 +-7.8875 +0 +LINE +8 +0 +10 +158.9375 +20 +-7.8875 +11 +158.9375 +21 +-20.6875 +0 +LINE +8 +0 +10 +158.9375 +20 +-20.6875 +11 +174.4375 +21 +-20.6875 +0 +LINE +8 +0 +10 +174.4375 +20 +-20.6875 +11 +174.4375 +21 +-7.8875 +0 +LINE +8 +0 +10 +183.9625 +20 +-26.9375 +11 +168.4625 +21 +-26.9375 +0 +LINE +8 +0 +10 +168.4625 +20 +-26.9375 +11 +168.4625 +21 +-39.7375 +0 +LINE +8 +0 +10 +168.4625 +20 +-39.7375 +11 +183.9625 +21 +-39.7375 +0 +LINE +8 +0 +10 +183.9625 +20 +-39.7375 +11 +183.9625 +21 +-26.9375 +0 +LINE +8 +0 +10 +169.675 +20 +-45.9875 +11 +154.175 +21 +-45.9875 +0 +LINE +8 +0 +10 +154.175 +20 +-45.9875 +11 +154.175 +21 +-58.7875 +0 +LINE +8 +0 +10 +154.175 +20 +-58.7875 +11 +169.675 +21 +-58.7875 +0 +LINE +8 +0 +10 +169.675 +20 +-58.7875 +11 +169.675 +21 +-45.9875 +0 +LINE +8 +0 +10 +150.625 +20 +-45.9875 +11 +135.125 +21 +-45.9875 +0 +LINE +8 +0 +10 +135.125 +20 +-45.9875 +11 +135.125 +21 +-58.7875 +0 +LINE +8 +0 +10 +135.125 +20 +-58.7875 +11 +150.625 +21 +-58.7875 +0 +LINE +8 +0 +10 +150.625 +20 +-58.7875 +11 +150.625 +21 +-45.9875 +0 +LINE +8 +0 +10 +160.15 +20 +-65.0375 +11 +144.65 +21 +-65.0375 +0 +LINE +8 +0 +10 +144.65 +20 +-65.0375 +11 +144.65 +21 +-77.8375 +0 +LINE +8 +0 +10 +144.65 +20 +-77.8375 +11 +160.15 +21 +-77.8375 +0 +LINE +8 +0 +10 +160.15 +20 +-77.8375 +11 +160.15 +21 +-65.0375 +0 +LINE +8 +0 +10 +141.1 +20 +-65.0375 +11 +125.6 +21 +-65.0375 +0 +LINE +8 +0 +10 +125.6 +20 +-65.0375 +11 +125.6 +21 +-77.8375 +0 +LINE +8 +0 +10 +125.6 +20 +-77.8375 +11 +141.1 +21 +-77.8375 +0 +LINE +8 +0 +10 +141.1 +20 +-77.8375 +11 +141.1 +21 +-65.0375 +0 +LINE +8 +0 +10 +155.3875 +20 +-7.8875 +11 +139.8875 +21 +-7.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-7.8875 +11 +139.8875 +21 +-20.6875 +0 +LINE +8 +0 +10 +139.8875 +20 +-20.6875 +11 +155.3875 +21 +-20.6875 +0 +LINE +8 +0 +10 +155.3875 +20 +-20.6875 +11 +155.3875 +21 +-7.8875 +0 +LINE +8 +0 +10 +136.3375 +20 +-7.8875 +11 +120.8375 +21 +-7.8875 +0 +LINE +8 +0 +10 +120.8375 +20 +-7.8875 +11 +120.8375 +21 +-20.6875 +0 +LINE +8 +0 +10 +120.8375 +20 +-20.6875 +11 +136.3375 +21 +-20.6875 +0 +LINE +8 +0 +10 +136.3375 +20 +-20.6875 +11 +136.3375 +21 +-7.8875 +0 +LINE +8 +0 +10 +164.9125 +20 +-26.9375 +11 +149.4125 +21 +-26.9375 +0 +LINE +8 +0 +10 +149.4125 +20 +-26.9375 +11 +149.4125 +21 +-39.7375 +0 +LINE +8 +0 +10 +149.4125 +20 +-39.7375 +11 +164.9125 +21 +-39.7375 +0 +LINE +8 +0 +10 +164.9125 +20 +-39.7375 +11 +164.9125 +21 +-26.9375 +0 +LINE +8 +0 +10 +145.8625 +20 +-26.9375 +11 +130.3625 +21 +-26.9375 +0 +LINE +8 +0 +10 +130.3625 +20 +-26.9375 +11 +130.3625 +21 +-39.7375 +0 +LINE +8 +0 +10 +130.3625 +20 +-39.7375 +11 +145.8625 +21 +-39.7375 +0 +LINE +8 +0 +10 +145.8625 +20 +-39.7375 +11 +145.8625 +21 +-26.9375 +0 +LINE +8 +0 +10 +131.575 +20 +-45.9875 +11 +116.075 +21 +-45.9875 +0 +LINE +8 +0 +10 +116.075 +20 +-45.9875 +11 +116.075 +21 +-58.7875 +0 +LINE +8 +0 +10 +116.075 +20 +-58.7875 +11 +131.575 +21 +-58.7875 +0 +LINE +8 +0 +10 +131.575 +20 +-58.7875 +11 +131.575 +21 +-45.9875 +0 +LINE +8 +0 +10 +122.05 +20 +-65.0375 +11 +106.55 +21 +-65.0375 +0 +LINE +8 +0 +10 +106.55 +20 +-65.0375 +11 +106.55 +21 +-77.8375 +0 +LINE +8 +0 +10 +106.55 +20 +-77.8375 +11 +122.05 +21 +-77.8375 +0 +LINE +8 +0 +10 +122.05 +20 +-77.8375 +11 +122.05 +21 +-65.0375 +0 +LINE +8 +0 +10 +103.0 +20 +-65.0375 +11 +87.5 +21 +-65.0375 +0 +LINE +8 +0 +10 +87.5 +20 +-65.0375 +11 +87.5 +21 +-77.8375 +0 +LINE +8 +0 +10 +87.5 +20 +-77.8375 +11 +103.0 +21 +-77.8375 +0 +LINE +8 +0 +10 +103.0 +20 +-77.8375 +11 +103.0 +21 +-65.0375 +0 +LINE +8 +0 +10 +117.2875 +20 +-7.8875 +11 +101.7875 +21 +-7.8875 +0 +LINE +8 +0 +10 +101.7875 +20 +-7.8875 +11 +101.7875 +21 +-20.6875 +0 +LINE +8 +0 +10 +101.7875 +20 +-20.6875 +11 +117.2875 +21 +-20.6875 +0 +LINE +8 +0 +10 +117.2875 +20 +-20.6875 +11 +117.2875 +21 +-7.8875 +0 +LINE +8 +0 +10 +98.2375 +20 +-7.8875 +11 +82.7375 +21 +-7.8875 +0 +LINE +8 +0 +10 +82.7375 +20 +-7.8875 +11 +82.7375 +21 +-20.6875 +0 +LINE +8 +0 +10 +82.7375 +20 +-20.6875 +11 +98.2375 +21 +-20.6875 +0 +LINE +8 +0 +10 +98.2375 +20 +-20.6875 +11 +98.2375 +21 +-7.8875 +0 +LINE +8 +0 +10 +126.8125 +20 +-26.9375 +11 +111.3125 +21 +-26.9375 +0 +LINE +8 +0 +10 +111.3125 +20 +-26.9375 +11 +111.3125 +21 +-39.7375 +0 +LINE +8 +0 +10 +111.3125 +20 +-39.7375 +11 +126.8125 +21 +-39.7375 +0 +LINE +8 +0 +10 +126.8125 +20 +-39.7375 +11 +126.8125 +21 +-26.9375 +0 +LINE +8 +0 +10 +107.7625 +20 +-26.9375 +11 +92.2625 +21 +-26.9375 +0 +LINE +8 +0 +10 +92.2625 +20 +-26.9375 +11 +92.2625 +21 +-39.7375 +0 +LINE +8 +0 +10 +92.2625 +20 +-39.7375 +11 +107.7625 +21 +-39.7375 +0 +LINE +8 +0 +10 +107.7625 +20 +-39.7375 +11 +107.7625 +21 +-26.9375 +0 +LINE +8 +0 +10 +112.525 +20 +-45.9875 +11 +97.025 +21 +-45.9875 +0 +LINE +8 +0 +10 +97.025 +20 +-45.9875 +11 +97.025 +21 +-58.7875 +0 +LINE +8 +0 +10 +97.025 +20 +-58.7875 +11 +112.525 +21 +-58.7875 +0 +LINE +8 +0 +10 +112.525 +20 +-58.7875 +11 +112.525 +21 +-45.9875 +0 +LINE +8 +0 +10 +93.475 +20 +-45.9875 +11 +77.975 +21 +-45.9875 +0 +LINE +8 +0 +10 +77.975 +20 +-45.9875 +11 +77.975 +21 +-58.7875 +0 +LINE +8 +0 +10 +77.975 +20 +-58.7875 +11 +93.475 +21 +-58.7875 +0 +LINE +8 +0 +10 +93.475 +20 +-58.7875 +11 +93.475 +21 +-45.9875 +0 +LINE +8 +0 +10 +83.95 +20 +-65.0375 +11 +68.45 +21 +-65.0375 +0 +LINE +8 +0 +10 +68.45 +20 +-65.0375 +11 +68.45 +21 +-77.8375 +0 +LINE +8 +0 +10 +68.45 +20 +-77.8375 +11 +83.95 +21 +-77.8375 +0 +LINE +8 +0 +10 +83.95 +20 +-77.8375 +11 +83.95 +21 +-65.0375 +0 +LINE +8 +0 +10 +79.1875 +20 +-84.0875 +11 +63.6875 +21 +-84.0875 +0 +LINE +8 +0 +10 +63.6875 +20 +-84.0875 +11 +63.6875 +21 +-96.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-96.8875 +11 +79.1875 +21 +-96.8875 +0 +LINE +8 +0 +10 +79.1875 +20 +-96.8875 +11 +79.1875 +21 +-84.0875 +0 +LINE +8 +0 +10 +79.1875 +20 +-7.8875 +11 +63.6875 +21 +-7.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-7.8875 +11 +63.6875 +21 +-20.6875 +0 +LINE +8 +0 +10 +63.6875 +20 +-20.6875 +11 +79.1875 +21 +-20.6875 +0 +LINE +8 +0 +10 +79.1875 +20 +-20.6875 +11 +79.1875 +21 +-7.8875 +0 +LINE +8 +0 +10 +60.1375 +20 +-7.8875 +11 +44.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +44.6375 +20 +-7.8875 +11 +44.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +44.6375 +20 +-20.6875 +11 +60.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +60.1375 +20 +-20.6875 +11 +60.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +88.7125 +20 +-26.9375 +11 +73.2125 +21 +-26.9375 +0 +LINE +8 +0 +10 +73.2125 +20 +-26.9375 +11 +73.2125 +21 +-39.7375 +0 +LINE +8 +0 +10 +73.2125 +20 +-39.7375 +11 +88.7125 +21 +-39.7375 +0 +LINE +8 +0 +10 +88.7125 +20 +-39.7375 +11 +88.7125 +21 +-26.9375 +0 +LINE +8 +0 +10 +69.6625 +20 +-26.9375 +11 +54.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +54.1625 +20 +-26.9375 +11 +54.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +54.1625 +20 +-39.7375 +11 +69.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +69.6625 +20 +-39.7375 +11 +69.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +74.425 +20 +-45.9875 +11 +58.925 +21 +-45.9875 +0 +LINE +8 +0 +10 +58.925 +20 +-45.9875 +11 +58.925 +21 +-58.7875 +0 +LINE +8 +0 +10 +58.925 +20 +-58.7875 +11 +74.425 +21 +-58.7875 +0 +LINE +8 +0 +10 +74.425 +20 +-58.7875 +11 +74.425 +21 +-45.9875 +0 +LINE +8 +0 +10 +64.9 +20 +-65.0375 +11 +49.4 +21 +-65.0375 +0 +LINE +8 +0 +10 +49.4 +20 +-65.0375 +11 +49.4 +21 +-77.8375 +0 +LINE +8 +0 +10 +49.4 +20 +-77.8375 +11 +64.9 +21 +-77.8375 +0 +LINE +8 +0 +10 +64.9 +20 +-77.8375 +11 +64.9 +21 +-65.0375 +0 +LINE +8 +0 +10 +52.9937 +20 +-84.0875 +11 +37.4937 +21 +-84.0875 +0 +LINE +8 +0 +10 +37.4937 +20 +-84.0875 +11 +37.4937 +21 +-96.8875 +0 +LINE +8 +0 +10 +37.4937 +20 +-96.8875 +11 +52.9937 +21 +-96.8875 +0 +LINE +8 +0 +10 +52.9937 +20 +-96.8875 +11 +52.9937 +21 +-84.0875 +0 +LINE +8 +0 +10 +41.0875 +20 +-7.8875 +11 +25.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +25.5875 +20 +-7.8875 +11 +25.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +25.5875 +20 +-20.6875 +11 +41.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +41.0875 +20 +-20.6875 +11 +41.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +22.0375 +20 +-7.8875 +11 +6.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +6.5375 +20 +-7.8875 +11 +6.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +6.5375 +20 +-20.6875 +11 +22.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +22.0375 +20 +-20.6875 +11 +22.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +50.6125 +20 +-26.9375 +11 +35.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +35.1125 +20 +-26.9375 +11 +35.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +35.1125 +20 +-39.7375 +11 +50.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +50.6125 +20 +-39.7375 +11 +50.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +26.8 +20 +-26.9375 +11 +11.3 +21 +-26.9375 +0 +LINE +8 +0 +10 +11.3 +20 +-26.9375 +11 +11.3 +21 +-39.7375 +0 +LINE +8 +0 +10 +11.3 +20 +-39.7375 +11 +26.8 +21 +-39.7375 +0 +LINE +8 +0 +10 +26.8 +20 +-39.7375 +11 +26.8 +21 +-26.9375 +0 +LINE +8 +0 +10 +55.375 +20 +-45.9875 +11 +39.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +39.875 +20 +-45.9875 +11 +39.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +39.875 +20 +-58.7875 +11 +55.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +55.375 +20 +-58.7875 +11 +55.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +29.18125 +20 +-45.9875 +11 +13.68125 +21 +-45.9875 +0 +LINE +8 +0 +10 +13.68125 +20 +-45.9875 +11 +13.68125 +21 +-58.7875 +0 +LINE +8 +0 +10 +13.68125 +20 +-58.7875 +11 +29.18125 +21 +-58.7875 +0 +LINE +8 +0 +10 +29.18125 +20 +-58.7875 +11 +29.18125 +21 +-45.9875 +0 +LINE +8 +0 +10 +26.8 +20 +-84.0875 +11 +11.3 +21 +-84.0875 +0 +LINE +8 +0 +10 +11.3 +20 +-84.0875 +11 +11.3 +21 +-96.8875 +0 +LINE +8 +0 +10 +11.3 +20 +-96.8875 +11 +26.8 +21 +-96.8875 +0 +LINE +8 +0 +10 +26.8 +20 +-96.8875 +11 +26.8 +21 +-84.0875 +0 +LINE +8 +0 +10 +260.1625 +20 +-26.9375 +11 +244.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +244.6625 +20 +-26.9375 +11 +244.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +244.6625 +20 +-39.7375 +11 +260.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +260.1625 +20 +-39.7375 +11 +260.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-26.9375 +11 +268.475 +21 +-26.9375 +0 +LINE +8 +0 +10 +268.475 +20 +-26.9375 +11 +268.475 +21 +-39.7375 +0 +LINE +8 +0 +10 +268.475 +20 +-39.7375 +11 +283.975 +21 +-39.7375 +0 +LINE +8 +0 +10 +283.975 +20 +-39.7375 +11 +283.975 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-84.0875 +11 +268.475 +21 +-84.0875 +0 +LINE +8 +0 +10 +268.475 +20 +-84.0875 +11 +268.475 +21 +-96.8875 +0 +LINE +8 +0 +10 +268.475 +20 +-96.8875 +11 +283.975 +21 +-96.8875 +0 +LINE +8 +0 +10 +283.975 +20 +-96.8875 +11 +283.975 +21 +-84.0875 +0 +LINE +8 +0 +10 +250.6375 +20 +-7.8875 +11 +235.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +235.1375 +20 +-7.8875 +11 +235.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +235.1375 +20 +-20.6875 +11 +250.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +250.6375 +20 +-20.6875 +11 +250.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +241.1125 +20 +-26.9375 +11 +225.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +225.6125 +20 +-26.9375 +11 +225.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +225.6125 +20 +-39.7375 +11 +241.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +241.1125 +20 +-39.7375 +11 +241.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +222.0625 +20 +-26.9375 +11 +206.5625 +21 +-26.9375 +0 +LINE +8 +0 +10 +206.5625 +20 +-26.9375 +11 +206.5625 +21 +-39.7375 +0 +LINE +8 +0 +10 +206.5625 +20 +-39.7375 +11 +222.0625 +21 +-39.7375 +0 +LINE +8 +0 +10 +222.0625 +20 +-39.7375 +11 +222.0625 +21 +-26.9375 +0 +LINE +8 +0 +10 +245.875 +20 +-45.9875 +11 +230.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +230.375 +20 +-45.9875 +11 +230.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +230.375 +20 +-58.7875 +11 +245.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +245.875 +20 +-58.7875 +11 +245.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +226.825 +20 +-45.9875 +11 +211.325 +21 +-45.9875 +0 +LINE +8 +0 +10 +211.325 +20 +-45.9875 +11 +211.325 +21 +-58.7875 +0 +LINE +8 +0 +10 +211.325 +20 +-58.7875 +11 +226.825 +21 +-58.7875 +0 +LINE +8 +0 +10 +226.825 +20 +-58.7875 +11 +226.825 +21 +-45.9875 +0 +LINE +8 +0 +10 +236.35 +20 +-65.0375 +11 +220.85 +21 +-65.0375 +0 +LINE +8 +0 +10 +220.85 +20 +-65.0375 +11 +220.85 +21 +-77.8375 +0 +LINE +8 +0 +10 +220.85 +20 +-77.8375 +11 +236.35 +21 +-77.8375 +0 +LINE +8 +0 +10 +236.35 +20 +-77.8375 +11 +236.35 +21 +-65.0375 +0 +LINE +8 +0 +10 +217.3 +20 +-65.0375 +11 +201.8 +21 +-65.0375 +0 +LINE +8 +0 +10 +201.8 +20 +-65.0375 +11 +201.8 +21 +-77.8375 +0 +LINE +8 +0 +10 +201.8 +20 +-77.8375 +11 +217.3 +21 +-77.8375 +0 +LINE +8 +0 +10 +217.3 +20 +-77.8375 +11 +217.3 +21 +-65.0375 +0 +LINE +8 +0 +10 +257.78125 +20 +-84.0875 +11 +242.28125 +21 +-84.0875 +0 +LINE +8 +0 +10 +242.28125 +20 +-84.0875 +11 +242.28125 +21 +-96.8875 +0 +LINE +8 +0 +10 +242.28125 +20 +-96.8875 +11 +257.78125 +21 +-96.8875 +0 +LINE +8 +0 +10 +257.78125 +20 +-96.8875 +11 +257.78125 +21 +-84.0875 +0 +LINE +8 +0 +10 +231.5875 +20 +-7.8875 +11 +216.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-7.8875 +11 +216.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +216.0875 +20 +-20.6875 +11 +231.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +231.5875 +20 +-20.6875 +11 +231.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +212.5375 +20 +-7.8875 +11 +197.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +197.0375 +20 +-7.8875 +11 +197.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +197.0375 +20 +-20.6875 +11 +212.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +212.5375 +20 +-20.6875 +11 +212.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +203.0125 +20 +-26.9375 +11 +187.5125 +21 +-26.9375 +0 +LINE +8 +0 +10 +187.5125 +20 +-26.9375 +11 +187.5125 +21 +-39.7375 +0 +LINE +8 +0 +10 +187.5125 +20 +-39.7375 +11 +203.0125 +21 +-39.7375 +0 +LINE +8 +0 +10 +203.0125 +20 +-39.7375 +11 +203.0125 +21 +-26.9375 +0 +LINE +8 +0 +10 +207.775 +20 +-45.9875 +11 +192.275 +21 +-45.9875 +0 +LINE +8 +0 +10 +192.275 +20 +-45.9875 +11 +192.275 +21 +-58.7875 +0 +LINE +8 +0 +10 +192.275 +20 +-58.7875 +11 +207.775 +21 +-58.7875 +0 +LINE +8 +0 +10 +207.775 +20 +-58.7875 +11 +207.775 +21 +-45.9875 +0 +LINE +8 +0 +10 +188.725 +20 +-45.9875 +11 +173.225 +21 +-45.9875 +0 +LINE +8 +0 +10 +173.225 +20 +-45.9875 +11 +173.225 +21 +-58.7875 +0 +LINE +8 +0 +10 +173.225 +20 +-58.7875 +11 +188.725 +21 +-58.7875 +0 +LINE +8 +0 +10 +188.725 +20 +-58.7875 +11 +188.725 +21 +-45.9875 +0 +LINE +8 +0 +10 +198.25 +20 +-65.0375 +11 +182.75 +21 +-65.0375 +0 +LINE +8 +0 +10 +182.75 +20 +-65.0375 +11 +182.75 +21 +-77.8375 +0 +LINE +8 +0 +10 +182.75 +20 +-77.8375 +11 +198.25 +21 +-77.8375 +0 +LINE +8 +0 +10 +198.25 +20 +-77.8375 +11 +198.25 +21 +-65.0375 +0 +LINE +8 +0 +10 +179.2 +20 +-65.0375 +11 +163.7 +21 +-65.0375 +0 +LINE +8 +0 +10 +163.7 +20 +-65.0375 +11 +163.7 +21 +-77.8375 +0 +LINE +8 +0 +10 +163.7 +20 +-77.8375 +11 +179.2 +21 +-77.8375 +0 +LINE +8 +0 +10 +179.2 +20 +-77.8375 +11 +179.2 +21 +-65.0375 +0 +LINE +8 +0 +10 +231.5875 +20 +-84.0875 +11 +216.0875 +21 +-84.0875 +0 +LINE +8 +0 +10 +216.0875 +20 +-84.0875 +11 +216.0875 +21 +-96.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-96.8875 +11 +231.5875 +21 +-96.8875 +0 +LINE +8 +0 +10 +231.5875 +20 +-96.8875 +11 +231.5875 +21 +-84.0875 +0 +LINE +8 +0 +10 +244.01875 +20 +-75.3375 +11 +244.01875 +21 +-80.4375 +0 +LINE +8 +0 +10 +244.01875 +20 +-80.4375 +11 +241.41875 +21 +-80.4375 +0 +LINE +8 +0 +10 +241.41875 +20 +-80.4375 +11 +241.41875 +21 +-75.3375 +0 +LINE +8 +0 +10 +241.41875 +20 +-75.3375 +11 +244.01875 +21 +-75.3375 +0 +LINE +8 +0 +10 +284.61875 +20 +-75.3375 +11 +284.61875 +21 +-80.4375 +0 +LINE +8 +0 +10 +284.61875 +20 +-80.4375 +11 +287.21875 +21 +-80.4375 +0 +LINE +8 +0 +10 +287.21875 +20 +-80.4375 +11 +287.21875 +21 +-75.3375 +0 +LINE +8 +0 +10 +287.21875 +20 +-75.3375 +11 +284.61875 +21 +-75.3375 +0 +LINE +8 +0 +10 +272.06875 +20 +-65.0375 +11 +256.56875 +21 +-65.0375 +0 +LINE +8 +0 +10 +256.56875 +20 +-65.0375 +11 +256.56875 +21 +-77.8375 +0 +LINE +8 +0 +10 +256.56875 +20 +-77.8375 +11 +272.06875 +21 +-77.8375 +0 +LINE +8 +0 +10 +272.06875 +20 +-77.8375 +11 +272.06875 +21 +-65.0375 +0 +TEXT +8 +Cmts +62 +1 +10 +303.847897 +20 +-52.73062 +1 +95.000 mm +40 +1.5 +41 +1.5 +50 +270.186984 +7 +SIMPLEX +72 +1 +73 +2 +11 +303.847897 +21 +-52.73062 +0 +LINE +8 +Cmts +62 +1 +10 +287.34 +20 +-100.28 +11 +305.35289 +21 +-100.221215 +0 +LINE +8 +Cmts +62 +1 +10 +287.03 +20 +-5.29 +11 +305.04289 +21 +-5.231215 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.652904 +21 +-100.230026 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +302.06281 +21 +-99.105442 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +303.235645 +21 +-99.101614 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +301.760163 +21 +-6.368438 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.932998 +21 +-6.36461 +0 +TEXT +8 +Cmts +62 +1 +10 +17.92 +20 +-43.7 +1 +25.6125 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +17.92 +21 +-43.7 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-33.34 +11 +30.71 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-33.34 +11 +5.13 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +30.71 +21 +-42.35 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-41.763579 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-41.763579 +0 +TEXT +8 +Cmts +62 +1 +10 +277.347461 +20 +-39.634741 +1 +25.6125 mm +40 +1.5 +41 +1.5 +50 +0.022425 +7 +SIMPLEX +72 +1 +73 +2 +11 +277.347461 +21 +-39.634741 +0 +LINE +8 +Cmts +62 +1 +10 +290.12 +20 +-33.34 +11 +290.12299 +21 +-40.979741 +0 +LINE +8 +Cmts +62 +1 +10 +264.57 +20 +-33.35 +11 +264.57299 +21 +-40.989741 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +290.121933 +21 +-38.279741 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.995659 +21 +-38.866603 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.9952 +21 +-37.693761 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698666 +21 +-38.875721 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698207 +21 +-37.702879 +0 +TEXT +8 +Cmts +62 +1 +10 +202.7 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +202.7 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-93.64 +11 +204.05 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-87.34 +11 +204.05 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.35 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +200.763579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +201.936421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +200.763579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.936421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +258.43468 +20 +-33.349763 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.090946 +7 +SIMPLEX +72 +1 +73 +2 +11 +258.43468 +21 +-33.349763 +0 +LINE +8 +Cmts +62 +1 +10 +264.59 +20 +-36.49 +11 +257.089682 +21 +-36.501906 +0 +LINE +8 +Cmts +62 +1 +10 +264.58 +20 +-30.19 +11 +257.079682 +21 +-30.201906 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.789679 +21 +-36.49762 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +259.201471 +21 +-35.372048 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +260.374311 +21 +-35.370187 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.195047 +21 +-31.325053 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +260.367887 +21 +-31.323192 +0 +TEXT +8 +Cmts +62 +1 +10 +24.47 +20 +-33.33 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +24.47 +21 +-33.33 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-36.48 +11 +23.12 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-30.18 +11 +23.12 +21 +-30.18 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.82 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +25.233579 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +26.406421 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.233579 +21 +-31.306504 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +26.406421 +21 +-31.306504 +0 +TEXT +8 +Cmts +62 +1 +10 +103.46 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +103.46 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-93.64 +11 +102.11 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-87.34 +11 +102.11 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.81 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +104.223579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +105.396421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.223579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +105.396421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +171.54 +20 +-78.67 +1 +47.800 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +171.54 +21 +-78.67 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.49 +11 +147.64 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-90.49 +11 +195.44 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +147.64 +21 +-80.02 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-80.606421 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-80.606421 +0 +TEXT +8 +Cmts +62 +1 +10 +128.64 +20 +-109.43 +1 +38.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +128.64 +21 +-109.43 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-90.48 +11 +109.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.48 +11 +147.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +109.64 +21 +-108.08 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-108.666421 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-108.666421 +0 +TEXT +8 +Cmts +62 +1 +10 +197.96 +20 +-99.88 +1 +0.800 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +197.96 +21 +-99.88 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-100.28 +11 +199.31 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-99.48 +11 +199.31 +21 +-99.48 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.61 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +196.023579 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +197.196421 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.023579 +21 +-100.606504 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +197.196421 +21 +-100.606504 +0 +TEXT +8 +Cmts +62 +1 +10 +188.875133 +20 +-92.417616 +1 +3.900 mm +40 +1.5 +41 +1.5 +50 +89.559272 +7 +SIMPLEX +72 +1 +73 +2 +11 +188.875133 +21 +-92.417616 +0 +LINE +8 +Cmts +62 +1 +10 +191.77 +20 +-94.39 +11 +187.510173 +21 +-94.357232 +0 +LINE +8 +Cmts +62 +1 +10 +191.8 +20 +-90.49 +11 +187.540173 +21 +-90.457232 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +190.210093 +21 +-94.378001 +0 +LINE +8 +Cmts +62 +1 +10 +190.210093 +20 +-94.378001 +11 +189.632355 +21 +-93.24702 +0 +LINE +8 +Cmts +62 +1 +10 +190.210093 +20 +-94.378001 +11 +190.805162 +21 +-93.256041 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +189.645024 +21 +-91.599961 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +190.817831 +21 +-91.608982 +0 +TEXT +8 +Cmts +62 +1 +10 +159.664849 +20 +-87.283312 +1 +6.400 mm +40 +1.5 +41 +1.5 +50 +270.089525 +7 +SIMPLEX +72 +1 +73 +2 +11 +159.664849 +21 +-87.283312 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-84.09 +11 +161.009848 +21 +-84.081203 +0 +LINE +8 +Cmts +62 +1 +10 +155.39 +20 +-90.49 +11 +161.019848 +21 +-90.481203 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +158.309851 +21 +-84.085422 +0 +LINE +8 +Cmts +62 +1 +10 +158.309851 +20 +-84.085422 +11 +158.898031 +21 +-85.211008 +0 +LINE +8 +Cmts +62 +1 +10 +158.309851 +20 +-84.085422 +11 +157.725191 +21 +-85.212841 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +158.904511 +21 +-89.358003 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +157.731671 +21 +-89.359836 +0 +LINE +8 +Cmts +62 +1 +10 +109.67 +20 +-90.4875 +11 +195.48 +21 +-90.4875 +0 +TEXT +8 +Cmts +62 +1 +10 +147.64 +20 +-117.98 +1 +88.300 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.64 +21 +-117.98 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-99.49 +11 +191.79 +21 +-119.33 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-99.49 +11 +103.49 +21 +-119.33 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +191.79 +21 +-116.63 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-116.63 +11 +190.663496 +21 +-117.216421 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-116.63 +11 +190.663496 +21 +-116.043579 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +104.616504 +21 +-117.216421 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +104.616504 +21 +-116.043579 +0 +TEXT +8 +Cmts +62 +1 +10 +102.19 +20 +-104.41 +1 +2.600 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +102.19 +21 +-104.41 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-99.49 +11 +103.49 +21 +-105.76 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-99.49 +11 +100.89 +21 +-105.76 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +103.49 +21 +-103.06 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-103.06 +11 +102.363496 +21 +-103.646421 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-103.06 +11 +102.363496 +21 +-102.473579 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +102.016504 +21 +-103.646421 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +102.016504 +21 +-102.473579 +0 +TEXT +8 +Cmts +62 +1 +10 +97.67 +20 +-96.94 +1 +5.100 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +97.67 +21 +-96.94 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-99.49 +11 +96.32 +21 +-99.49 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-94.39 +11 +96.32 +21 +-94.39 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +99.02 +21 +-99.49 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-99.49 +11 +98.433579 +21 +-98.363496 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-99.49 +11 +99.606421 +21 +-98.363496 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +98.433579 +21 +-95.516504 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +99.606421 +21 +-95.516504 +0 +TEXT +8 +Cmts +62 +1 +10 +109.63 +20 +-81.13 +1 +14.500 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +109.63 +21 +-81.13 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-89.28 +11 +102.38 +21 +-79.78 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-89.28 +11 +116.88 +21 +-79.78 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +102.38 +21 +-82.48 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-82.48 +11 +103.506504 +21 +-81.893579 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-82.48 +11 +103.506504 +21 +-83.066421 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +115.753496 +21 +-81.893579 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +115.753496 +21 +-83.066421 +0 +TEXT +8 +Cmts +62 +1 +10 +121.803009 +20 +-90.50045 +1 +2.400 mm +40 +1.5 +41 +1.5 +50 +89.761269 +7 +SIMPLEX +72 +1 +73 +2 +11 +121.803009 +21 +-90.50045 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-91.68 +11 +123.147997 +21 +-91.706075 +0 +LINE +8 +Cmts +62 +1 +10 +116.9 +20 +-89.28 +11 +123.157997 +21 +-89.306075 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +120.448021 +21 +-91.694825 +0 +LINE +8 +Cmts +62 +1 +10 +120.448021 +20 +-91.694825 +11 +119.866299 +21 +-90.565888 +0 +LINE +8 +Cmts +62 +1 +10 +120.448021 +20 +-91.694825 +11 +121.03913 +21 +-90.570774 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +119.866912 +21 +-90.418876 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +121.039743 +21 +-90.423762 +0 +TEXT +8 +Cmts +62 +1 +10 +115.69 +20 +-85.3 +1 +2.400 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +115.69 +21 +-85.3 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-89.28 +11 +116.89 +21 +-83.95 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-89.28 +11 +114.49 +21 +-83.95 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +116.89 +21 +-86.65 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-86.65 +11 +115.763496 +21 +-87.236421 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-86.65 +11 +115.763496 +21 +-86.063579 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +115.616504 +21 +-87.236421 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +115.616504 +21 +-86.063579 +0 +TEXT +8 +Cmts +62 +1 +10 +135.19 +20 +-90.49 +1 +12.800 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +135.19 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +139.89 +20 +-96.89 +11 +133.84 +21 +-96.89 +0 +LINE +8 +Cmts +62 +1 +10 +139.89 +20 +-84.09 +11 +133.84 +21 +-84.09 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +136.54 +21 +-96.89 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-96.89 +11 +135.953579 +21 +-95.763496 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-96.89 +11 +137.126421 +21 +-95.763496 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +135.953579 +21 +-85.216504 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +137.126421 +21 +-85.216504 +0 +TEXT +8 +Cmts +62 +1 +10 +147.63 +20 +-105.02 +1 +15.500 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.63 +21 +-105.02 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-96.87 +11 +139.88 +21 +-106.37 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-96.87 +11 +155.38 +21 +-106.37 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +139.88 +21 +-103.67 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-103.67 +11 +141.006504 +21 +-103.083579 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-103.67 +11 +141.006504 +21 +-104.256421 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +154.253496 +21 +-103.083579 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +154.253496 +21 +-104.256421 +0 +CIRCLE +8 +0 +10 +30.75 +20 +-33.3375 +40 +3.15 +0 +CIRCLE +8 +0 +10 +195.4375 +20 +-90.4875 +40 +3.15 +0 +CIRCLE +8 +0 +10 +264.525 +20 +-33.3375 +40 +3.15 +0 +LINE +8 +0 +10 +290.1375 +20 +-7.7875 +11 +290.1375 +21 +-58.7125 +0 +LINE +8 +0 +10 +288.3375 +20 +-58.7125 +11 +290.1375 +21 +-58.7125 +0 +LINE +8 +0 +10 +5.1375 +20 +-65.0125 +11 +5.1375 +21 +-97.7875 +0 +LINE +8 +0 +10 +288.3375 +20 +-65.1125 +11 +290.1375 +21 +-65.1125 +0 +LINE +8 +0 +10 +8.7375 +20 +-65.0125 +11 +5.1375 +21 +-65.0125 +0 +LINE +8 +0 +10 +8.7375 +20 +-58.8125 +11 +5.1375 +21 +-58.8125 +0 +ARC +8 +0 +10 +8.7375 +20 +-61.9125 +30 +0.0 +40 +3.1 +50 +-90.0 +51 +90.0 +0 +ARC +8 +0 +10 +288.3375 +20 +-61.9125 +30 +0.0 +40 +3.2 +50 +90.0 +51 +270.0 +0 +TEXT +8 +Cmts +62 +1 +10 +277.6375 +20 +6.3625 +1 +25.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +277.6375 +21 +6.3625 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +-33.3375 +11 +265.1375 +21 +7.7125 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +-33.3375 +11 +290.1375 +21 +7.7125 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +265.1375 +21 +5.0125 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +5.0125 +11 +266.264004 +21 +5.598921 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +5.0125 +11 +266.264004 +21 +4.426079 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +289.010996 +21 +5.598921 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +289.010996 +21 +4.426079 +0 +TEXT +8 +Cmts +62 +1 +10 +147.6375 +20 +10.875 +1 +285.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.6375 +21 +10.875 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +-7.14375 +11 +290.1375 +21 +12.225 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +-7.14375 +11 +5.1375 +21 +12.225 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +290.1375 +21 +9.525 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +9.525 +11 +289.010996 +21 +8.938579 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +9.525 +11 +289.010996 +21 +10.111421 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +6.264004 +21 +8.938579 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +6.264004 +21 +10.111421 +0 +ARC +8 +0 +10 +7.6375 +20 +-97.7875 +30 +0.0 +40 +2.5 +50 +-180.0 +51 +-90.0 +0 +ARC +8 +0 +10 +287.6375 +20 +-97.7875 +30 +0.0 +40 +2.5 +50 +-90.0 +51 +0.0 +0 +ARC +8 +0 +10 +287.6375 +20 +-7.7875 +30 +0.0 +40 +2.5 +50 +0.0 +51 +90.0 +0 +ARC +8 +0 +10 +7.6375 +20 +-7.7875 +30 +0.0 +40 +2.5 +50 +90.0 +51 +180.0 +0 +LINE +8 +0 +10 +290.1375 +20 +-97.7875 +11 +290.1375 +21 +-65.1125 +0 +LINE +8 +0 +10 +7.6375 +20 +-100.2875 +11 +287.6375 +21 +-100.2875 +0 +LINE +8 +0 +10 +5.1375 +20 +-7.7875 +11 +5.1375 +21 +-58.8125 +0 +LINE +8 +0 +10 +7.6375 +20 +-5.2875 +11 +287.6375 +21 +-5.2875 +0 +ENDSEC +0 +EOF \ No newline at end of file diff --git a/keyboards/weebkeeb/config.h b/keyboards/weebkeeb/config.h new file mode 100644 index 0000000000..859adc9cc2 --- /dev/null +++ b/keyboards/weebkeeb/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT weebkeeb +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, F0, F1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/weebkeeb/keymaps/default/Makefile b/keyboards/weebkeeb/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/config.h b/keyboards/weebkeeb/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/keymap.c b/keyboards/weebkeeb/keymaps/default/keymap.c new file mode 100644 index 0000000000..cdf1f1e4c7 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/keymap.c @@ -0,0 +1,119 @@ +#include "weebkeeb.h" + +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_LCTL, ADJUST, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(4), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), +[4] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/readme.md b/keyboards/weebkeeb/keymaps/default/readme.md new file mode 100644 index 0000000000..8771322763 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for weebkeeb \ No newline at end of file diff --git a/keyboards/weebkeeb/readme.md b/keyboards/weebkeeb/readme.md new file mode 100644 index 0000000000..bf31016c82 --- /dev/null +++ b/keyboards/weebkeeb/readme.md @@ -0,0 +1,28 @@ +weebkeeb keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/weebkeeb folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/weebkeeb/rules.mk b/keyboards/weebkeeb/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/weebkeeb/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/weebkeeb.c b/keyboards/weebkeeb/weebkeeb.c new file mode 100644 index 0000000000..483fc9440e --- /dev/null +++ b/keyboards/weebkeeb/weebkeeb.c @@ -0,0 +1,28 @@ +#include "weebkeeb.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/weebkeeb/weebkeeb.h b/keyboards/weebkeeb/weebkeeb.h new file mode 100644 index 0000000000..7bca2c2014 --- /dev/null +++ b/keyboards/weebkeeb/weebkeeb.h @@ -0,0 +1,23 @@ +#ifndef WEEBKEEB_H +#define WEEBKEEB_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} + +#endif From 45b7718fb154c6400b169a9d3005cedebd37ff9a Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:30:40 -0500 Subject: [PATCH 3/6] cleaned up personal projects --- keyboards/pilcrow/Makefile | 3 - keyboards/pilcrow/config.h | 162 - keyboards/pilcrow/keymaps/default/Makefile | 21 - keyboards/pilcrow/keymaps/default/config.h | 8 - keyboards/pilcrow/keymaps/default/keymap.c | 88 - keyboards/pilcrow/keymaps/default/readme.md | 1 - keyboards/pilcrow/pilcrow.c | 28 - keyboards/pilcrow/pilcrow.h | 23 - keyboards/pilcrow/readme.md | 28 - keyboards/pilcrow/rules.mk | 67 - keyboards/weebkeeb/Makefile | 3 - keyboards/weebkeeb/aek.dxf | 6486 ------------------ keyboards/weebkeeb/config.h | 162 - keyboards/weebkeeb/keymaps/default/Makefile | 21 - keyboards/weebkeeb/keymaps/default/config.h | 8 - keyboards/weebkeeb/keymaps/default/keymap.c | 119 - keyboards/weebkeeb/keymaps/default/readme.md | 1 - keyboards/weebkeeb/readme.md | 28 - keyboards/weebkeeb/rules.mk | 67 - keyboards/weebkeeb/weebkeeb.c | 28 - keyboards/weebkeeb/weebkeeb.h | 23 - 21 files changed, 7375 deletions(-) delete mode 100644 keyboards/pilcrow/Makefile delete mode 100644 keyboards/pilcrow/config.h delete mode 100644 keyboards/pilcrow/keymaps/default/Makefile delete mode 100644 keyboards/pilcrow/keymaps/default/config.h delete mode 100644 keyboards/pilcrow/keymaps/default/keymap.c delete mode 100644 keyboards/pilcrow/keymaps/default/readme.md delete mode 100644 keyboards/pilcrow/pilcrow.c delete mode 100644 keyboards/pilcrow/pilcrow.h delete mode 100644 keyboards/pilcrow/readme.md delete mode 100644 keyboards/pilcrow/rules.mk delete mode 100644 keyboards/weebkeeb/Makefile delete mode 100644 keyboards/weebkeeb/aek.dxf delete mode 100644 keyboards/weebkeeb/config.h delete mode 100644 keyboards/weebkeeb/keymaps/default/Makefile delete mode 100644 keyboards/weebkeeb/keymaps/default/config.h delete mode 100644 keyboards/weebkeeb/keymaps/default/keymap.c delete mode 100644 keyboards/weebkeeb/keymaps/default/readme.md delete mode 100644 keyboards/weebkeeb/readme.md delete mode 100644 keyboards/weebkeeb/rules.mk delete mode 100644 keyboards/weebkeeb/weebkeeb.c delete mode 100644 keyboards/weebkeeb/weebkeeb.h diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/pilcrow/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif \ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h deleted file mode 100644 index d79c1ba40c..0000000000 --- a/keyboards/pilcrow/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT pilcrow -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, C6, D7, E6 } -#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/pilcrow/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/pilcrow/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c deleted file mode 100644 index e382e4c6ad..0000000000 --- a/keyboards/pilcrow/keymaps/default/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -#include "pilcrow.h" -#define _______ KC_TRNS -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ - KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[1] = KEYMAP( \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ - _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ -), -[2] = KEYMAP( \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ - OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ - _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[3] = KEYMAP( \ - RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ - KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ - _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ -) -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md deleted file mode 100644 index 95472dfca8..0000000000 --- a/keyboards/pilcrow/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c deleted file mode 100644 index c8243df7bf..0000000000 --- a/keyboards/pilcrow/pilcrow.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "pilcrow.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h deleted file mode 100644 index 7138ccb3f6..0000000000 --- a/keyboards/pilcrow/pilcrow.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef PILCROW_H -#define PILCROW_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ -} - -#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md deleted file mode 100644 index 7a7f6d2af5..0000000000 --- a/keyboards/pilcrow/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -pilcrow keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk deleted file mode 100644 index 55898147dd..0000000000 --- a/keyboards/pilcrow/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/weebkeeb/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif \ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf deleted file mode 100644 index cfe80946bd..0000000000 --- a/keyboards/weebkeeb/aek.dxf +++ /dev/null @@ -1,6486 +0,0 @@ -0 -SECTION -2 -ENTITIES -0 -LINE -8 -0 -10 -104.7875 -20 --89.2875 -11 -104.7875 -21 --91.6875 -0 -LINE -8 -0 -10 -104.7875 -20 --91.6875 -11 -102.3875 -21 --91.6875 -0 -LINE -8 -0 -10 -102.3875 -20 --91.6875 -11 -102.3875 -21 --89.2875 -0 -LINE -8 -0 -10 -102.3875 -20 --89.2875 -11 -104.7875 -21 --89.2875 -0 -LINE -8 -0 -10 -116.8875 -20 --89.2875 -11 -116.8875 -21 --91.6875 -0 -LINE -8 -0 -10 -116.8875 -20 --91.6875 -11 -114.4875 -21 --91.6875 -0 -LINE -8 -0 -10 -114.4875 -20 --91.6875 -11 -114.4875 -21 --89.2875 -0 -LINE -8 -0 -10 -114.4875 -20 --89.2875 -11 -116.8875 -21 --89.2875 -0 -CIRCLE -8 -0 -10 -109.6375 -20 --90.4875 -40 -3.15 -0 -LINE -8 -0 -10 -103.4875 -20 --94.3875 -11 -103.4875 -21 --99.4875 -0 -LINE -8 -0 -10 -103.4875 -20 --99.4875 -11 -100.8875 -21 --99.4875 -0 -LINE -8 -0 -10 -100.8875 -20 --99.4875 -11 -100.8875 -21 --94.3875 -0 -LINE -8 -0 -10 -100.8875 -20 --94.3875 -11 -103.4875 -21 --94.3875 -0 -LINE -8 -0 -10 -191.7875 -20 --94.3875 -11 -191.7875 -21 --99.4875 -0 -LINE -8 -0 -10 -191.7875 -20 --99.4875 -11 -194.3875 -21 --99.4875 -0 -LINE -8 -0 -10 -194.3875 -20 --99.4875 -11 -194.3875 -21 --94.3875 -0 -LINE -8 -0 -10 -194.3875 -20 --94.3875 -11 -191.7875 -21 --94.3875 -0 -LINE -8 -0 -10 -155.3875 -20 --84.0875 -11 -139.8875 -21 --84.0875 -0 -LINE -8 -0 -10 -139.8875 -20 --84.0875 -11 -139.8875 -21 --96.8875 -0 -LINE -8 -0 -10 -139.8875 -20 --96.8875 -11 -155.3875 -21 --96.8875 -0 -LINE -8 -0 -10 -155.3875 -20 --96.8875 -11 -155.3875 -21 --84.0875 -0 -LINE -8 -0 -10 -256.28125 -20 --56.2875 -11 -256.28125 -21 --61.3875 -0 -LINE -8 -0 -10 -256.28125 -20 --61.3875 -11 -253.68125 -21 --61.3875 -0 -LINE -8 -0 -10 -253.68125 -20 --61.3875 -11 -253.68125 -21 --56.2875 -0 -LINE -8 -0 -10 -253.68125 -20 --56.2875 -11 -256.28125 -21 --56.2875 -0 -LINE -8 -0 -10 -281.88125 -20 --56.2875 -11 -281.88125 -21 --61.3875 -0 -LINE -8 -0 -10 -281.88125 -20 --61.3875 -11 -284.48125 -21 --61.3875 -0 -LINE -8 -0 -10 -284.48125 -20 --61.3875 -11 -284.48125 -21 --56.2875 -0 -LINE -8 -0 -10 -284.48125 -20 --56.2875 -11 -281.88125 -21 --56.2875 -0 -LINE -8 -0 -10 -276.83125 -20 --45.9875 -11 -261.33125 -21 --45.9875 -0 -LINE -8 -0 -10 -261.33125 -20 --45.9875 -11 -261.33125 -21 --58.7875 -0 -LINE -8 -0 -10 -261.33125 -20 --58.7875 -11 -276.83125 -21 --58.7875 -0 -LINE -8 -0 -10 -276.83125 -20 --58.7875 -11 -276.83125 -21 --45.9875 -0 -LINE -8 -0 -10 -258.6625 -20 --18.1875 -11 -258.6625 -21 --23.2875 -0 -LINE -8 -0 -10 -258.6625 -20 --23.2875 -11 -256.0625 -21 --23.2875 -0 -LINE -8 -0 -10 -256.0625 -20 --23.2875 -11 -256.0625 -21 --18.1875 -0 -LINE -8 -0 -10 -256.0625 -20 --18.1875 -11 -258.6625 -21 --18.1875 -0 -LINE -8 -0 -10 -284.2625 -20 --18.1875 -11 -284.2625 -21 --23.2875 -0 -LINE -8 -0 -10 -284.2625 -20 --23.2875 -11 -286.8625 -21 --23.2875 -0 -LINE -8 -0 -10 -286.8625 -20 --23.2875 -11 -286.8625 -21 --18.1875 -0 -LINE -8 -0 -10 -286.8625 -20 --18.1875 -11 -284.2625 -21 --18.1875 -0 -LINE -8 -0 -10 -279.2125 -20 --7.8875 -11 -263.7125 -21 --7.8875 -0 -LINE -8 -0 -10 -263.7125 -20 --7.8875 -11 -263.7125 -21 --20.6875 -0 -LINE -8 -0 -10 -263.7125 -20 --20.6875 -11 -279.2125 -21 --20.6875 -0 -LINE -8 -0 -10 -279.2125 -20 --20.6875 -11 -279.2125 -21 --7.8875 -0 -LINE -8 -0 -10 -13.39375 -20 --75.3375 -11 -13.39375 -21 --80.4375 -0 -LINE -8 -0 -10 -13.39375 -20 --80.4375 -11 -10.79375 -21 --80.4375 -0 -LINE -8 -0 -10 -10.79375 -20 --80.4375 -11 -10.79375 -21 --75.3375 -0 -LINE -8 -0 -10 -10.79375 -20 --75.3375 -11 -13.39375 -21 --75.3375 -0 -LINE -8 -0 -10 -38.99375 -20 --75.3375 -11 -38.99375 -21 --80.4375 -0 -LINE -8 -0 -10 -38.99375 -20 --80.4375 -11 -41.59375 -21 --80.4375 -0 -LINE -8 -0 -10 -41.59375 -20 --80.4375 -11 -41.59375 -21 --75.3375 -0 -LINE -8 -0 -10 -41.59375 -20 --75.3375 -11 -38.99375 -21 --75.3375 -0 -LINE -8 -0 -10 -33.94375 -20 --65.0375 -11 -18.44375 -21 --65.0375 -0 -LINE -8 -0 -10 -18.44375 -20 --65.0375 -11 -18.44375 -21 --77.8375 -0 -LINE -8 -0 -10 -18.44375 -20 --77.8375 -11 -33.94375 -21 --77.8375 -0 -LINE -8 -0 -10 -33.94375 -20 --77.8375 -11 -33.94375 -21 --65.0375 -0 -LINE -8 -0 -10 -193.4875 -20 --7.8875 -11 -177.9875 -21 --7.8875 -0 -LINE -8 -0 -10 -177.9875 -20 --7.8875 -11 -177.9875 -21 --20.6875 -0 -LINE -8 -0 -10 -177.9875 -20 --20.6875 -11 -193.4875 -21 --20.6875 -0 -LINE -8 -0 -10 -193.4875 -20 --20.6875 -11 -193.4875 -21 --7.8875 -0 -LINE -8 -0 -10 -174.4375 -20 --7.8875 -11 -158.9375 -21 --7.8875 -0 -LINE -8 -0 -10 -158.9375 -20 --7.8875 -11 -158.9375 -21 --20.6875 -0 -LINE -8 -0 -10 -158.9375 -20 --20.6875 -11 -174.4375 -21 --20.6875 -0 -LINE -8 -0 -10 -174.4375 -20 --20.6875 -11 -174.4375 -21 --7.8875 -0 -LINE -8 -0 -10 -183.9625 -20 --26.9375 -11 -168.4625 -21 --26.9375 -0 -LINE -8 -0 -10 -168.4625 -20 --26.9375 -11 -168.4625 -21 --39.7375 -0 -LINE -8 -0 -10 -168.4625 -20 --39.7375 -11 -183.9625 -21 --39.7375 -0 -LINE -8 -0 -10 -183.9625 -20 --39.7375 -11 -183.9625 -21 --26.9375 -0 -LINE -8 -0 -10 -169.675 -20 --45.9875 -11 -154.175 -21 --45.9875 -0 -LINE -8 -0 -10 -154.175 -20 --45.9875 -11 -154.175 -21 --58.7875 -0 -LINE -8 -0 -10 -154.175 -20 --58.7875 -11 -169.675 -21 --58.7875 -0 -LINE -8 -0 -10 -169.675 -20 --58.7875 -11 -169.675 -21 --45.9875 -0 -LINE -8 -0 -10 -150.625 -20 --45.9875 -11 -135.125 -21 --45.9875 -0 -LINE -8 -0 -10 -135.125 -20 --45.9875 -11 -135.125 -21 --58.7875 -0 -LINE -8 -0 -10 -135.125 -20 --58.7875 -11 -150.625 -21 --58.7875 -0 -LINE -8 -0 -10 -150.625 -20 --58.7875 -11 -150.625 -21 --45.9875 -0 -LINE -8 -0 -10 -160.15 -20 --65.0375 -11 -144.65 -21 --65.0375 -0 -LINE -8 -0 -10 -144.65 -20 --65.0375 -11 -144.65 -21 --77.8375 -0 -LINE -8 -0 -10 -144.65 -20 --77.8375 -11 -160.15 -21 --77.8375 -0 -LINE -8 -0 -10 -160.15 -20 --77.8375 -11 -160.15 -21 --65.0375 -0 -LINE -8 -0 -10 -141.1 -20 --65.0375 -11 -125.6 -21 --65.0375 -0 -LINE -8 -0 -10 -125.6 -20 --65.0375 -11 -125.6 -21 --77.8375 -0 -LINE -8 -0 -10 -125.6 -20 --77.8375 -11 -141.1 -21 --77.8375 -0 -LINE -8 -0 -10 -141.1 -20 --77.8375 -11 -141.1 -21 --65.0375 -0 -LINE -8 -0 -10 -155.3875 -20 --7.8875 -11 -139.8875 -21 --7.8875 -0 -LINE -8 -0 -10 -139.8875 -20 --7.8875 -11 -139.8875 -21 --20.6875 -0 -LINE -8 -0 -10 -139.8875 -20 --20.6875 -11 -155.3875 -21 --20.6875 -0 -LINE -8 -0 -10 -155.3875 -20 --20.6875 -11 -155.3875 -21 --7.8875 -0 -LINE -8 -0 -10 -136.3375 -20 --7.8875 -11 -120.8375 -21 --7.8875 -0 -LINE -8 -0 -10 -120.8375 -20 --7.8875 -11 -120.8375 -21 --20.6875 -0 -LINE -8 -0 -10 -120.8375 -20 --20.6875 -11 -136.3375 -21 --20.6875 -0 -LINE -8 -0 -10 -136.3375 -20 --20.6875 -11 -136.3375 -21 --7.8875 -0 -LINE -8 -0 -10 -164.9125 -20 --26.9375 -11 -149.4125 -21 --26.9375 -0 -LINE -8 -0 -10 -149.4125 -20 --26.9375 -11 -149.4125 -21 --39.7375 -0 -LINE -8 -0 -10 -149.4125 -20 --39.7375 -11 -164.9125 -21 --39.7375 -0 -LINE -8 -0 -10 -164.9125 -20 --39.7375 -11 -164.9125 -21 --26.9375 -0 -LINE -8 -0 -10 -145.8625 -20 --26.9375 -11 -130.3625 -21 --26.9375 -0 -LINE -8 -0 -10 -130.3625 -20 --26.9375 -11 -130.3625 -21 --39.7375 -0 -LINE -8 -0 -10 -130.3625 -20 --39.7375 -11 -145.8625 -21 --39.7375 -0 -LINE -8 -0 -10 -145.8625 -20 --39.7375 -11 -145.8625 -21 --26.9375 -0 -LINE -8 -0 -10 -131.575 -20 --45.9875 -11 -116.075 -21 --45.9875 -0 -LINE -8 -0 -10 -116.075 -20 --45.9875 -11 -116.075 -21 --58.7875 -0 -LINE -8 -0 -10 -116.075 -20 --58.7875 -11 -131.575 -21 --58.7875 -0 -LINE -8 -0 -10 -131.575 -20 --58.7875 -11 -131.575 -21 --45.9875 -0 -LINE -8 -0 -10 -122.05 -20 --65.0375 -11 -106.55 -21 --65.0375 -0 -LINE -8 -0 -10 -106.55 -20 --65.0375 -11 -106.55 -21 --77.8375 -0 -LINE -8 -0 -10 -106.55 -20 --77.8375 -11 -122.05 -21 --77.8375 -0 -LINE -8 -0 -10 -122.05 -20 --77.8375 -11 -122.05 -21 --65.0375 -0 -LINE -8 -0 -10 -103.0 -20 --65.0375 -11 -87.5 -21 --65.0375 -0 -LINE -8 -0 -10 -87.5 -20 --65.0375 -11 -87.5 -21 --77.8375 -0 -LINE -8 -0 -10 -87.5 -20 --77.8375 -11 -103.0 -21 --77.8375 -0 -LINE -8 -0 -10 -103.0 -20 --77.8375 -11 -103.0 -21 --65.0375 -0 -LINE -8 -0 -10 -117.2875 -20 --7.8875 -11 -101.7875 -21 --7.8875 -0 -LINE -8 -0 -10 -101.7875 -20 --7.8875 -11 -101.7875 -21 --20.6875 -0 -LINE -8 -0 -10 -101.7875 -20 --20.6875 -11 -117.2875 -21 --20.6875 -0 -LINE -8 -0 -10 -117.2875 -20 --20.6875 -11 -117.2875 -21 --7.8875 -0 -LINE -8 -0 -10 -98.2375 -20 --7.8875 -11 -82.7375 -21 --7.8875 -0 -LINE -8 -0 -10 -82.7375 -20 --7.8875 -11 -82.7375 -21 --20.6875 -0 -LINE -8 -0 -10 -82.7375 -20 --20.6875 -11 -98.2375 -21 --20.6875 -0 -LINE -8 -0 -10 -98.2375 -20 --20.6875 -11 -98.2375 -21 --7.8875 -0 -LINE -8 -0 -10 -126.8125 -20 --26.9375 -11 -111.3125 -21 --26.9375 -0 -LINE -8 -0 -10 -111.3125 -20 --26.9375 -11 -111.3125 -21 --39.7375 -0 -LINE -8 -0 -10 -111.3125 -20 --39.7375 -11 -126.8125 -21 --39.7375 -0 -LINE -8 -0 -10 -126.8125 -20 --39.7375 -11 -126.8125 -21 --26.9375 -0 -LINE -8 -0 -10 -107.7625 -20 --26.9375 -11 -92.2625 -21 --26.9375 -0 -LINE -8 -0 -10 -92.2625 -20 --26.9375 -11 -92.2625 -21 --39.7375 -0 -LINE -8 -0 -10 -92.2625 -20 --39.7375 -11 -107.7625 -21 --39.7375 -0 -LINE -8 -0 -10 -107.7625 -20 --39.7375 -11 -107.7625 -21 --26.9375 -0 -LINE -8 -0 -10 -112.525 -20 --45.9875 -11 -97.025 -21 --45.9875 -0 -LINE -8 -0 -10 -97.025 -20 --45.9875 -11 -97.025 -21 --58.7875 -0 -LINE -8 -0 -10 -97.025 -20 --58.7875 -11 -112.525 -21 --58.7875 -0 -LINE -8 -0 -10 -112.525 -20 --58.7875 -11 -112.525 -21 --45.9875 -0 -LINE -8 -0 -10 -93.475 -20 --45.9875 -11 -77.975 -21 --45.9875 -0 -LINE -8 -0 -10 -77.975 -20 --45.9875 -11 -77.975 -21 --58.7875 -0 -LINE -8 -0 -10 -77.975 -20 --58.7875 -11 -93.475 -21 --58.7875 -0 -LINE -8 -0 -10 -93.475 -20 --58.7875 -11 -93.475 -21 --45.9875 -0 -LINE -8 -0 -10 -83.95 -20 --65.0375 -11 -68.45 -21 --65.0375 -0 -LINE -8 -0 -10 -68.45 -20 --65.0375 -11 -68.45 -21 --77.8375 -0 -LINE -8 -0 -10 -68.45 -20 --77.8375 -11 -83.95 -21 --77.8375 -0 -LINE -8 -0 -10 -83.95 -20 --77.8375 -11 -83.95 -21 --65.0375 -0 -LINE -8 -0 -10 -79.1875 -20 --84.0875 -11 -63.6875 -21 --84.0875 -0 -LINE -8 -0 -10 -63.6875 -20 --84.0875 -11 -63.6875 -21 --96.8875 -0 -LINE -8 -0 -10 -63.6875 -20 --96.8875 -11 -79.1875 -21 --96.8875 -0 -LINE -8 -0 -10 -79.1875 -20 --96.8875 -11 -79.1875 -21 --84.0875 -0 -LINE -8 -0 -10 -79.1875 -20 --7.8875 -11 -63.6875 -21 --7.8875 -0 -LINE -8 -0 -10 -63.6875 -20 --7.8875 -11 -63.6875 -21 --20.6875 -0 -LINE -8 -0 -10 -63.6875 -20 --20.6875 -11 -79.1875 -21 --20.6875 -0 -LINE -8 -0 -10 -79.1875 -20 --20.6875 -11 -79.1875 -21 --7.8875 -0 -LINE -8 -0 -10 -60.1375 -20 --7.8875 -11 -44.6375 -21 --7.8875 -0 -LINE -8 -0 -10 -44.6375 -20 --7.8875 -11 -44.6375 -21 --20.6875 -0 -LINE -8 -0 -10 -44.6375 -20 --20.6875 -11 -60.1375 -21 --20.6875 -0 -LINE -8 -0 -10 -60.1375 -20 --20.6875 -11 -60.1375 -21 --7.8875 -0 -LINE -8 -0 -10 -88.7125 -20 --26.9375 -11 -73.2125 -21 --26.9375 -0 -LINE -8 -0 -10 -73.2125 -20 --26.9375 -11 -73.2125 -21 --39.7375 -0 -LINE -8 -0 -10 -73.2125 -20 --39.7375 -11 -88.7125 -21 --39.7375 -0 -LINE -8 -0 -10 -88.7125 -20 --39.7375 -11 -88.7125 -21 --26.9375 -0 -LINE -8 -0 -10 -69.6625 -20 --26.9375 -11 -54.1625 -21 --26.9375 -0 -LINE -8 -0 -10 -54.1625 -20 --26.9375 -11 -54.1625 -21 --39.7375 -0 -LINE -8 -0 -10 -54.1625 -20 --39.7375 -11 -69.6625 -21 --39.7375 -0 -LINE -8 -0 -10 -69.6625 -20 --39.7375 -11 -69.6625 -21 --26.9375 -0 -LINE -8 -0 -10 -74.425 -20 --45.9875 -11 -58.925 -21 --45.9875 -0 -LINE -8 -0 -10 -58.925 -20 --45.9875 -11 -58.925 -21 --58.7875 -0 -LINE -8 -0 -10 -58.925 -20 --58.7875 -11 -74.425 -21 --58.7875 -0 -LINE -8 -0 -10 -74.425 -20 --58.7875 -11 -74.425 -21 --45.9875 -0 -LINE -8 -0 -10 -64.9 -20 --65.0375 -11 -49.4 -21 --65.0375 -0 -LINE -8 -0 -10 -49.4 -20 --65.0375 -11 -49.4 -21 --77.8375 -0 -LINE -8 -0 -10 -49.4 -20 --77.8375 -11 -64.9 -21 --77.8375 -0 -LINE -8 -0 -10 -64.9 -20 --77.8375 -11 -64.9 -21 --65.0375 -0 -LINE -8 -0 -10 -52.9937 -20 --84.0875 -11 -37.4937 -21 --84.0875 -0 -LINE -8 -0 -10 -37.4937 -20 --84.0875 -11 -37.4937 -21 --96.8875 -0 -LINE -8 -0 -10 -37.4937 -20 --96.8875 -11 -52.9937 -21 --96.8875 -0 -LINE -8 -0 -10 -52.9937 -20 --96.8875 -11 -52.9937 -21 --84.0875 -0 -LINE -8 -0 -10 -41.0875 -20 --7.8875 -11 -25.5875 -21 --7.8875 -0 -LINE -8 -0 -10 -25.5875 -20 --7.8875 -11 -25.5875 -21 --20.6875 -0 -LINE -8 -0 -10 -25.5875 -20 --20.6875 -11 -41.0875 -21 --20.6875 -0 -LINE -8 -0 -10 -41.0875 -20 --20.6875 -11 -41.0875 -21 --7.8875 -0 -LINE -8 -0 -10 -22.0375 -20 --7.8875 -11 -6.5375 -21 --7.8875 -0 -LINE -8 -0 -10 -6.5375 -20 --7.8875 -11 -6.5375 -21 --20.6875 -0 -LINE -8 -0 -10 -6.5375 -20 --20.6875 -11 -22.0375 -21 --20.6875 -0 -LINE -8 -0 -10 -22.0375 -20 --20.6875 -11 -22.0375 -21 --7.8875 -0 -LINE -8 -0 -10 -50.6125 -20 --26.9375 -11 -35.1125 -21 --26.9375 -0 -LINE -8 -0 -10 -35.1125 -20 --26.9375 -11 -35.1125 -21 --39.7375 -0 -LINE -8 -0 -10 -35.1125 -20 --39.7375 -11 -50.6125 -21 --39.7375 -0 -LINE -8 -0 -10 -50.6125 -20 --39.7375 -11 -50.6125 -21 --26.9375 -0 -LINE -8 -0 -10 -26.8 -20 --26.9375 -11 -11.3 -21 --26.9375 -0 -LINE -8 -0 -10 -11.3 -20 --26.9375 -11 -11.3 -21 --39.7375 -0 -LINE -8 -0 -10 -11.3 -20 --39.7375 -11 -26.8 -21 --39.7375 -0 -LINE -8 -0 -10 -26.8 -20 --39.7375 -11 -26.8 -21 --26.9375 -0 -LINE -8 -0 -10 -55.375 -20 --45.9875 -11 -39.875 -21 --45.9875 -0 -LINE -8 -0 -10 -39.875 -20 --45.9875 -11 -39.875 -21 --58.7875 -0 -LINE -8 -0 -10 -39.875 -20 --58.7875 -11 -55.375 -21 --58.7875 -0 -LINE -8 -0 -10 -55.375 -20 --58.7875 -11 -55.375 -21 --45.9875 -0 -LINE -8 -0 -10 -29.18125 -20 --45.9875 -11 -13.68125 -21 --45.9875 -0 -LINE -8 -0 -10 -13.68125 -20 --45.9875 -11 -13.68125 -21 --58.7875 -0 -LINE -8 -0 -10 -13.68125 -20 --58.7875 -11 -29.18125 -21 --58.7875 -0 -LINE -8 -0 -10 -29.18125 -20 --58.7875 -11 -29.18125 -21 --45.9875 -0 -LINE -8 -0 -10 -26.8 -20 --84.0875 -11 -11.3 -21 --84.0875 -0 -LINE -8 -0 -10 -11.3 -20 --84.0875 -11 -11.3 -21 --96.8875 -0 -LINE -8 -0 -10 -11.3 -20 --96.8875 -11 -26.8 -21 --96.8875 -0 -LINE -8 -0 -10 -26.8 -20 --96.8875 -11 -26.8 -21 --84.0875 -0 -LINE -8 -0 -10 -260.1625 -20 --26.9375 -11 -244.6625 -21 --26.9375 -0 -LINE -8 -0 -10 -244.6625 -20 --26.9375 -11 -244.6625 -21 --39.7375 -0 -LINE -8 -0 -10 -244.6625 -20 --39.7375 -11 -260.1625 -21 --39.7375 -0 -LINE -8 -0 -10 -260.1625 -20 --39.7375 -11 -260.1625 -21 --26.9375 -0 -LINE -8 -0 -10 -283.975 -20 --26.9375 -11 -268.475 -21 --26.9375 -0 -LINE -8 -0 -10 -268.475 -20 --26.9375 -11 -268.475 -21 --39.7375 -0 -LINE -8 -0 -10 -268.475 -20 --39.7375 -11 -283.975 -21 --39.7375 -0 -LINE -8 -0 -10 -283.975 -20 --39.7375 -11 -283.975 -21 --26.9375 -0 -LINE -8 -0 -10 -283.975 -20 --84.0875 -11 -268.475 -21 --84.0875 -0 -LINE -8 -0 -10 -268.475 -20 --84.0875 -11 -268.475 -21 --96.8875 -0 -LINE -8 -0 -10 -268.475 -20 --96.8875 -11 -283.975 -21 --96.8875 -0 -LINE -8 -0 -10 -283.975 -20 --96.8875 -11 -283.975 -21 --84.0875 -0 -LINE -8 -0 -10 -250.6375 -20 --7.8875 -11 -235.1375 -21 --7.8875 -0 -LINE -8 -0 -10 -235.1375 -20 --7.8875 -11 -235.1375 -21 --20.6875 -0 -LINE -8 -0 -10 -235.1375 -20 --20.6875 -11 -250.6375 -21 --20.6875 -0 -LINE -8 -0 -10 -250.6375 -20 --20.6875 -11 -250.6375 -21 --7.8875 -0 -LINE -8 -0 -10 -241.1125 -20 --26.9375 -11 -225.6125 -21 --26.9375 -0 -LINE -8 -0 -10 -225.6125 -20 --26.9375 -11 -225.6125 -21 --39.7375 -0 -LINE -8 -0 -10 -225.6125 -20 --39.7375 -11 -241.1125 -21 --39.7375 -0 -LINE -8 -0 -10 -241.1125 -20 --39.7375 -11 -241.1125 -21 --26.9375 -0 -LINE -8 -0 -10 -222.0625 -20 --26.9375 -11 -206.5625 -21 --26.9375 -0 -LINE -8 -0 -10 -206.5625 -20 --26.9375 -11 -206.5625 -21 --39.7375 -0 -LINE -8 -0 -10 -206.5625 -20 --39.7375 -11 -222.0625 -21 --39.7375 -0 -LINE -8 -0 -10 -222.0625 -20 --39.7375 -11 -222.0625 -21 --26.9375 -0 -LINE -8 -0 -10 -245.875 -20 --45.9875 -11 -230.375 -21 --45.9875 -0 -LINE -8 -0 -10 -230.375 -20 --45.9875 -11 -230.375 -21 --58.7875 -0 -LINE -8 -0 -10 -230.375 -20 --58.7875 -11 -245.875 -21 --58.7875 -0 -LINE -8 -0 -10 -245.875 -20 --58.7875 -11 -245.875 -21 --45.9875 -0 -LINE -8 -0 -10 -226.825 -20 --45.9875 -11 -211.325 -21 --45.9875 -0 -LINE -8 -0 -10 -211.325 -20 --45.9875 -11 -211.325 -21 --58.7875 -0 -LINE -8 -0 -10 -211.325 -20 --58.7875 -11 -226.825 -21 --58.7875 -0 -LINE -8 -0 -10 -226.825 -20 --58.7875 -11 -226.825 -21 --45.9875 -0 -LINE -8 -0 -10 -236.35 -20 --65.0375 -11 -220.85 -21 --65.0375 -0 -LINE -8 -0 -10 -220.85 -20 --65.0375 -11 -220.85 -21 --77.8375 -0 -LINE -8 -0 -10 -220.85 -20 --77.8375 -11 -236.35 -21 --77.8375 -0 -LINE -8 -0 -10 -236.35 -20 --77.8375 -11 -236.35 -21 --65.0375 -0 -LINE -8 -0 -10 -217.3 -20 --65.0375 -11 -201.8 -21 --65.0375 -0 -LINE -8 -0 -10 -201.8 -20 --65.0375 -11 -201.8 -21 --77.8375 -0 -LINE -8 -0 -10 -201.8 -20 --77.8375 -11 -217.3 -21 --77.8375 -0 -LINE -8 -0 -10 -217.3 -20 --77.8375 -11 -217.3 -21 --65.0375 -0 -LINE -8 -0 -10 -257.78125 -20 --84.0875 -11 -242.28125 -21 --84.0875 -0 -LINE -8 -0 -10 -242.28125 -20 --84.0875 -11 -242.28125 -21 --96.8875 -0 -LINE -8 -0 -10 -242.28125 -20 --96.8875 -11 -257.78125 -21 --96.8875 -0 -LINE -8 -0 -10 -257.78125 -20 --96.8875 -11 -257.78125 -21 --84.0875 -0 -LINE -8 -0 -10 -231.5875 -20 --7.8875 -11 -216.0875 -21 --7.8875 -0 -LINE -8 -0 -10 -216.0875 -20 --7.8875 -11 -216.0875 -21 --20.6875 -0 -LINE -8 -0 -10 -216.0875 -20 --20.6875 -11 -231.5875 -21 --20.6875 -0 -LINE -8 -0 -10 -231.5875 -20 --20.6875 -11 -231.5875 -21 --7.8875 -0 -LINE -8 -0 -10 -212.5375 -20 --7.8875 -11 -197.0375 -21 --7.8875 -0 -LINE -8 -0 -10 -197.0375 -20 --7.8875 -11 -197.0375 -21 --20.6875 -0 -LINE -8 -0 -10 -197.0375 -20 --20.6875 -11 -212.5375 -21 --20.6875 -0 -LINE -8 -0 -10 -212.5375 -20 --20.6875 -11 -212.5375 -21 --7.8875 -0 -LINE -8 -0 -10 -203.0125 -20 --26.9375 -11 -187.5125 -21 --26.9375 -0 -LINE -8 -0 -10 -187.5125 -20 --26.9375 -11 -187.5125 -21 --39.7375 -0 -LINE -8 -0 -10 -187.5125 -20 --39.7375 -11 -203.0125 -21 --39.7375 -0 -LINE -8 -0 -10 -203.0125 -20 --39.7375 -11 -203.0125 -21 --26.9375 -0 -LINE -8 -0 -10 -207.775 -20 --45.9875 -11 -192.275 -21 --45.9875 -0 -LINE -8 -0 -10 -192.275 -20 --45.9875 -11 -192.275 -21 --58.7875 -0 -LINE -8 -0 -10 -192.275 -20 --58.7875 -11 -207.775 -21 --58.7875 -0 -LINE -8 -0 -10 -207.775 -20 --58.7875 -11 -207.775 -21 --45.9875 -0 -LINE -8 -0 -10 -188.725 -20 --45.9875 -11 -173.225 -21 --45.9875 -0 -LINE -8 -0 -10 -173.225 -20 --45.9875 -11 -173.225 -21 --58.7875 -0 -LINE -8 -0 -10 -173.225 -20 --58.7875 -11 -188.725 -21 --58.7875 -0 -LINE -8 -0 -10 -188.725 -20 --58.7875 -11 -188.725 -21 --45.9875 -0 -LINE -8 -0 -10 -198.25 -20 --65.0375 -11 -182.75 -21 --65.0375 -0 -LINE -8 -0 -10 -182.75 -20 --65.0375 -11 -182.75 -21 --77.8375 -0 -LINE -8 -0 -10 -182.75 -20 --77.8375 -11 -198.25 -21 --77.8375 -0 -LINE -8 -0 -10 -198.25 -20 --77.8375 -11 -198.25 -21 --65.0375 -0 -LINE -8 -0 -10 -179.2 -20 --65.0375 -11 -163.7 -21 --65.0375 -0 -LINE -8 -0 -10 -163.7 -20 --65.0375 -11 -163.7 -21 --77.8375 -0 -LINE -8 -0 -10 -163.7 -20 --77.8375 -11 -179.2 -21 --77.8375 -0 -LINE -8 -0 -10 -179.2 -20 --77.8375 -11 -179.2 -21 --65.0375 -0 -LINE -8 -0 -10 -231.5875 -20 --84.0875 -11 -216.0875 -21 --84.0875 -0 -LINE -8 -0 -10 -216.0875 -20 --84.0875 -11 -216.0875 -21 --96.8875 -0 -LINE -8 -0 -10 -216.0875 -20 --96.8875 -11 -231.5875 -21 --96.8875 -0 -LINE -8 -0 -10 -231.5875 -20 --96.8875 -11 -231.5875 -21 --84.0875 -0 -LINE -8 -0 -10 -244.01875 -20 --75.3375 -11 -244.01875 -21 --80.4375 -0 -LINE -8 -0 -10 -244.01875 -20 --80.4375 -11 -241.41875 -21 --80.4375 -0 -LINE -8 -0 -10 -241.41875 -20 --80.4375 -11 -241.41875 -21 --75.3375 -0 -LINE -8 -0 -10 -241.41875 -20 --75.3375 -11 -244.01875 -21 --75.3375 -0 -LINE -8 -0 -10 -284.61875 -20 --75.3375 -11 -284.61875 -21 --80.4375 -0 -LINE -8 -0 -10 -284.61875 -20 --80.4375 -11 -287.21875 -21 --80.4375 -0 -LINE -8 -0 -10 -287.21875 -20 --80.4375 -11 -287.21875 -21 --75.3375 -0 -LINE -8 -0 -10 -287.21875 -20 --75.3375 -11 -284.61875 -21 --75.3375 -0 -LINE -8 -0 -10 -272.06875 -20 --65.0375 -11 -256.56875 -21 --65.0375 -0 -LINE -8 -0 -10 -256.56875 -20 --65.0375 -11 -256.56875 -21 --77.8375 -0 -LINE -8 -0 -10 -256.56875 -20 --77.8375 -11 -272.06875 -21 --77.8375 -0 -LINE -8 -0 -10 -272.06875 -20 --77.8375 -11 -272.06875 -21 --65.0375 -0 -TEXT -8 -Cmts -62 -1 -10 -303.847897 -20 --52.73062 -1 -95.000 mm -40 -1.5 -41 -1.5 -50 -270.186984 -7 -SIMPLEX -72 -1 -73 -2 -11 -303.847897 -21 --52.73062 -0 -LINE -8 -Cmts -62 -1 -10 -287.34 -20 --100.28 -11 -305.35289 -21 --100.221215 -0 -LINE -8 -Cmts -62 -1 -10 -287.03 -20 --5.29 -11 -305.04289 -21 --5.231215 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -302.652904 -21 --100.230026 -0 -LINE -8 -Cmts -62 -1 -10 -302.652904 -20 --100.230026 -11 -302.06281 -21 --99.105442 -0 -LINE -8 -Cmts -62 -1 -10 -302.652904 -20 --100.230026 -11 -303.235645 -21 --99.101614 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -301.760163 -21 --6.368438 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -302.932998 -21 --6.36461 -0 -TEXT -8 -Cmts -62 -1 -10 -17.92 -20 --43.7 -1 -25.6125 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -17.92 -21 --43.7 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --33.34 -11 -30.71 -21 --45.05 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --33.34 -11 -5.13 -21 --45.05 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -30.71 -21 --42.35 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --42.35 -11 -29.583496 -21 --42.936421 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --42.35 -11 -29.583496 -21 --41.763579 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -6.256504 -21 --42.936421 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -6.256504 -21 --41.763579 -0 -TEXT -8 -Cmts -62 -1 -10 -277.347461 -20 --39.634741 -1 -25.6125 mm -40 -1.5 -41 -1.5 -50 -0.022425 -7 -SIMPLEX -72 -1 -73 -2 -11 -277.347461 -21 --39.634741 -0 -LINE -8 -Cmts -62 -1 -10 -290.12 -20 --33.34 -11 -290.12299 -21 --40.979741 -0 -LINE -8 -Cmts -62 -1 -10 -264.57 -20 --33.35 -11 -264.57299 -21 --40.989741 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -290.121933 -21 --38.279741 -0 -LINE -8 -Cmts -62 -1 -10 -290.121933 -20 --38.279741 -11 -288.995659 -21 --38.866603 -0 -LINE -8 -Cmts -62 -1 -10 -290.121933 -20 --38.279741 -11 -288.9952 -21 --37.693761 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -265.698666 -21 --38.875721 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -265.698207 -21 --37.702879 -0 -TEXT -8 -Cmts -62 -1 -10 -202.7 -20 --90.49 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -202.7 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --93.64 -11 -204.05 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --87.34 -11 -204.05 -21 --87.34 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -201.35 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --93.64 -11 -200.763579 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --93.64 -11 -201.936421 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -200.763579 -21 --88.466504 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -201.936421 -21 --88.466504 -0 -TEXT -8 -Cmts -62 -1 -10 -258.43468 -20 --33.349763 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.090946 -7 -SIMPLEX -72 -1 -73 -2 -11 -258.43468 -21 --33.349763 -0 -LINE -8 -Cmts -62 -1 -10 -264.59 -20 --36.49 -11 -257.089682 -21 --36.501906 -0 -LINE -8 -Cmts -62 -1 -10 -264.58 -20 --30.19 -11 -257.079682 -21 --30.201906 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -259.789679 -21 --36.49762 -0 -LINE -8 -Cmts -62 -1 -10 -259.789679 -20 --36.49762 -11 -259.201471 -21 --35.372048 -0 -LINE -8 -Cmts -62 -1 -10 -259.789679 -20 --36.49762 -11 -260.374311 -21 --35.370187 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -259.195047 -21 --31.325053 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -260.367887 -21 --31.323192 -0 -TEXT -8 -Cmts -62 -1 -10 -24.47 -20 --33.33 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -24.47 -21 --33.33 -0 -LINE -8 -Cmts -62 -1 -10 -30.72 -20 --36.48 -11 -23.12 -21 --36.48 -0 -LINE -8 -Cmts -62 -1 -10 -30.72 -20 --30.18 -11 -23.12 -21 --30.18 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -25.82 -21 --36.48 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --36.48 -11 -25.233579 -21 --35.353496 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --36.48 -11 -26.406421 -21 --35.353496 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -25.233579 -21 --31.306504 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -26.406421 -21 --31.306504 -0 -TEXT -8 -Cmts -62 -1 -10 -103.46 -20 --90.49 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -103.46 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --93.64 -11 -102.11 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --87.34 -11 -102.11 -21 --87.34 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -104.81 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --93.64 -11 -104.223579 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --93.64 -11 -105.396421 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -104.223579 -21 --88.466504 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -105.396421 -21 --88.466504 -0 -TEXT -8 -Cmts -62 -1 -10 -171.54 -20 --78.67 -1 -47.800 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -171.54 -21 --78.67 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --90.49 -11 -147.64 -21 --77.32 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --90.49 -11 -195.44 -21 --77.32 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -147.64 -21 --80.02 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --80.02 -11 -148.766504 -21 --79.433579 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --80.02 -11 -148.766504 -21 --80.606421 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -194.313496 -21 --79.433579 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -194.313496 -21 --80.606421 -0 -TEXT -8 -Cmts -62 -1 -10 -128.64 -20 --109.43 -1 -38.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -128.64 -21 --109.43 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --90.48 -11 -109.64 -21 --110.78 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --90.48 -11 -147.64 -21 --110.78 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -109.64 -21 --108.08 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --108.08 -11 -110.766504 -21 --107.493579 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --108.08 -11 -110.766504 -21 --108.666421 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -146.513496 -21 --107.493579 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -146.513496 -21 --108.666421 -0 -TEXT -8 -Cmts -62 -1 -10 -197.96 -20 --99.88 -1 -0.800 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -197.96 -21 --99.88 -0 -LINE -8 -Cmts -62 -1 -10 -194.38 -20 --100.28 -11 -199.31 -21 --100.28 -0 -LINE -8 -Cmts -62 -1 -10 -194.38 -20 --99.48 -11 -199.31 -21 --99.48 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -196.61 -21 --100.28 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --100.28 -11 -196.023579 -21 --99.153496 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --100.28 -11 -197.196421 -21 --99.153496 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -196.023579 -21 --100.606504 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -197.196421 -21 --100.606504 -0 -TEXT -8 -Cmts -62 -1 -10 -188.875133 -20 --92.417616 -1 -3.900 mm -40 -1.5 -41 -1.5 -50 -89.559272 -7 -SIMPLEX -72 -1 -73 -2 -11 -188.875133 -21 --92.417616 -0 -LINE -8 -Cmts -62 -1 -10 -191.77 -20 --94.39 -11 -187.510173 -21 --94.357232 -0 -LINE -8 -Cmts -62 -1 -10 -191.8 -20 --90.49 -11 -187.540173 -21 --90.457232 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -190.210093 -21 --94.378001 -0 -LINE -8 -Cmts -62 -1 -10 -190.210093 -20 --94.378001 -11 -189.632355 -21 --93.24702 -0 -LINE -8 -Cmts -62 -1 -10 -190.210093 -20 --94.378001 -11 -190.805162 -21 --93.256041 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -189.645024 -21 --91.599961 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -190.817831 -21 --91.608982 -0 -TEXT -8 -Cmts -62 -1 -10 -159.664849 -20 --87.283312 -1 -6.400 mm -40 -1.5 -41 -1.5 -50 -270.089525 -7 -SIMPLEX -72 -1 -73 -2 -11 -159.664849 -21 --87.283312 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --84.09 -11 -161.009848 -21 --84.081203 -0 -LINE -8 -Cmts -62 -1 -10 -155.39 -20 --90.49 -11 -161.019848 -21 --90.481203 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -158.309851 -21 --84.085422 -0 -LINE -8 -Cmts -62 -1 -10 -158.309851 -20 --84.085422 -11 -158.898031 -21 --85.211008 -0 -LINE -8 -Cmts -62 -1 -10 -158.309851 -20 --84.085422 -11 -157.725191 -21 --85.212841 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -158.904511 -21 --89.358003 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -157.731671 -21 --89.359836 -0 -LINE -8 -Cmts -62 -1 -10 -109.67 -20 --90.4875 -11 -195.48 -21 --90.4875 -0 -TEXT -8 -Cmts -62 -1 -10 -147.64 -20 --117.98 -1 -88.300 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.64 -21 --117.98 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --99.49 -11 -191.79 -21 --119.33 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --99.49 -11 -103.49 -21 --119.33 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -191.79 -21 --116.63 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --116.63 -11 -190.663496 -21 --117.216421 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --116.63 -11 -190.663496 -21 --116.043579 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -104.616504 -21 --117.216421 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -104.616504 -21 --116.043579 -0 -TEXT -8 -Cmts -62 -1 -10 -102.19 -20 --104.41 -1 -2.600 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -102.19 -21 --104.41 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --99.49 -11 -103.49 -21 --105.76 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --99.49 -11 -100.89 -21 --105.76 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -103.49 -21 --103.06 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --103.06 -11 -102.363496 -21 --103.646421 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --103.06 -11 -102.363496 -21 --102.473579 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -102.016504 -21 --103.646421 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -102.016504 -21 --102.473579 -0 -TEXT -8 -Cmts -62 -1 -10 -97.67 -20 --96.94 -1 -5.100 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -97.67 -21 --96.94 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --99.49 -11 -96.32 -21 --99.49 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --94.39 -11 -96.32 -21 --94.39 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -99.02 -21 --99.49 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --99.49 -11 -98.433579 -21 --98.363496 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --99.49 -11 -99.606421 -21 --98.363496 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -98.433579 -21 --95.516504 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -99.606421 -21 --95.516504 -0 -TEXT -8 -Cmts -62 -1 -10 -109.63 -20 --81.13 -1 -14.500 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -109.63 -21 --81.13 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --89.28 -11 -102.38 -21 --79.78 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --89.28 -11 -116.88 -21 --79.78 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -102.38 -21 --82.48 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --82.48 -11 -103.506504 -21 --81.893579 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --82.48 -11 -103.506504 -21 --83.066421 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -115.753496 -21 --81.893579 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -115.753496 -21 --83.066421 -0 -TEXT -8 -Cmts -62 -1 -10 -121.803009 -20 --90.50045 -1 -2.400 mm -40 -1.5 -41 -1.5 -50 -89.761269 -7 -SIMPLEX -72 -1 -73 -2 -11 -121.803009 -21 --90.50045 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --91.68 -11 -123.147997 -21 --91.706075 -0 -LINE -8 -Cmts -62 -1 -10 -116.9 -20 --89.28 -11 -123.157997 -21 --89.306075 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -120.448021 -21 --91.694825 -0 -LINE -8 -Cmts -62 -1 -10 -120.448021 -20 --91.694825 -11 -119.866299 -21 --90.565888 -0 -LINE -8 -Cmts -62 -1 -10 -120.448021 -20 --91.694825 -11 -121.03913 -21 --90.570774 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -119.866912 -21 --90.418876 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -121.039743 -21 --90.423762 -0 -TEXT -8 -Cmts -62 -1 -10 -115.69 -20 --85.3 -1 -2.400 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -115.69 -21 --85.3 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --89.28 -11 -116.89 -21 --83.95 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --89.28 -11 -114.49 -21 --83.95 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -116.89 -21 --86.65 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --86.65 -11 -115.763496 -21 --87.236421 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --86.65 -11 -115.763496 -21 --86.063579 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -115.616504 -21 --87.236421 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -115.616504 -21 --86.063579 -0 -TEXT -8 -Cmts -62 -1 -10 -135.19 -20 --90.49 -1 -12.800 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -135.19 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -139.89 -20 --96.89 -11 -133.84 -21 --96.89 -0 -LINE -8 -Cmts -62 -1 -10 -139.89 -20 --84.09 -11 -133.84 -21 --84.09 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -136.54 -21 --96.89 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --96.89 -11 -135.953579 -21 --95.763496 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --96.89 -11 -137.126421 -21 --95.763496 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -135.953579 -21 --85.216504 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -137.126421 -21 --85.216504 -0 -TEXT -8 -Cmts -62 -1 -10 -147.63 -20 --105.02 -1 -15.500 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.63 -21 --105.02 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --96.87 -11 -139.88 -21 --106.37 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --96.87 -11 -155.38 -21 --106.37 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -139.88 -21 --103.67 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --103.67 -11 -141.006504 -21 --103.083579 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --103.67 -11 -141.006504 -21 --104.256421 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -154.253496 -21 --103.083579 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -154.253496 -21 --104.256421 -0 -CIRCLE -8 -0 -10 -30.75 -20 --33.3375 -40 -3.15 -0 -CIRCLE -8 -0 -10 -195.4375 -20 --90.4875 -40 -3.15 -0 -CIRCLE -8 -0 -10 -264.525 -20 --33.3375 -40 -3.15 -0 -LINE -8 -0 -10 -290.1375 -20 --7.7875 -11 -290.1375 -21 --58.7125 -0 -LINE -8 -0 -10 -288.3375 -20 --58.7125 -11 -290.1375 -21 --58.7125 -0 -LINE -8 -0 -10 -5.1375 -20 --65.0125 -11 -5.1375 -21 --97.7875 -0 -LINE -8 -0 -10 -288.3375 -20 --65.1125 -11 -290.1375 -21 --65.1125 -0 -LINE -8 -0 -10 -8.7375 -20 --65.0125 -11 -5.1375 -21 --65.0125 -0 -LINE -8 -0 -10 -8.7375 -20 --58.8125 -11 -5.1375 -21 --58.8125 -0 -ARC -8 -0 -10 -8.7375 -20 --61.9125 -30 -0.0 -40 -3.1 -50 --90.0 -51 -90.0 -0 -ARC -8 -0 -10 -288.3375 -20 --61.9125 -30 -0.0 -40 -3.2 -50 -90.0 -51 -270.0 -0 -TEXT -8 -Cmts -62 -1 -10 -277.6375 -20 -6.3625 -1 -25.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -277.6375 -21 -6.3625 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 --33.3375 -11 -265.1375 -21 -7.7125 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 --33.3375 -11 -290.1375 -21 -7.7125 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -265.1375 -21 -5.0125 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 -5.0125 -11 -266.264004 -21 -5.598921 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 -5.0125 -11 -266.264004 -21 -4.426079 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -289.010996 -21 -5.598921 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -289.010996 -21 -4.426079 -0 -TEXT -8 -Cmts -62 -1 -10 -147.6375 -20 -10.875 -1 -285.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.6375 -21 -10.875 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 --7.14375 -11 -290.1375 -21 -12.225 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 --7.14375 -11 -5.1375 -21 -12.225 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -290.1375 -21 -9.525 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -9.525 -11 -289.010996 -21 -8.938579 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -9.525 -11 -289.010996 -21 -10.111421 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -6.264004 -21 -8.938579 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -6.264004 -21 -10.111421 -0 -ARC -8 -0 -10 -7.6375 -20 --97.7875 -30 -0.0 -40 -2.5 -50 --180.0 -51 --90.0 -0 -ARC -8 -0 -10 -287.6375 -20 --97.7875 -30 -0.0 -40 -2.5 -50 --90.0 -51 -0.0 -0 -ARC -8 -0 -10 -287.6375 -20 --7.7875 -30 -0.0 -40 -2.5 -50 -0.0 -51 -90.0 -0 -ARC -8 -0 -10 -7.6375 -20 --7.7875 -30 -0.0 -40 -2.5 -50 -90.0 -51 -180.0 -0 -LINE -8 -0 -10 -290.1375 -20 --97.7875 -11 -290.1375 -21 --65.1125 -0 -LINE -8 -0 -10 -7.6375 -20 --100.2875 -11 -287.6375 -21 --100.2875 -0 -LINE -8 -0 -10 -5.1375 -20 --7.7875 -11 -5.1375 -21 --58.8125 -0 -LINE -8 -0 -10 -7.6375 -20 --5.2875 -11 -287.6375 -21 --5.2875 -0 -ENDSEC -0 -EOF \ No newline at end of file diff --git a/keyboards/weebkeeb/config.h b/keyboards/weebkeeb/config.h deleted file mode 100644 index 859adc9cc2..0000000000 --- a/keyboards/weebkeeb/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT weebkeeb -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, F0, F1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/weebkeeb/keymaps/default/Makefile b/keyboards/weebkeeb/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/weebkeeb/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/config.h b/keyboards/weebkeeb/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/weebkeeb/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/keymap.c b/keyboards/weebkeeb/keymaps/default/keymap.c deleted file mode 100644 index cdf1f1e4c7..0000000000 --- a/keyboards/weebkeeb/keymaps/default/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ -#include "weebkeeb.h" - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LCTL, ADJUST, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(4), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[3] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), -[4] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = KEYMAP( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) -}; -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/readme.md b/keyboards/weebkeeb/keymaps/default/readme.md deleted file mode 100644 index 8771322763..0000000000 --- a/keyboards/weebkeeb/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for weebkeeb \ No newline at end of file diff --git a/keyboards/weebkeeb/readme.md b/keyboards/weebkeeb/readme.md deleted file mode 100644 index bf31016c82..0000000000 --- a/keyboards/weebkeeb/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -weebkeeb keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/weebkeeb folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/weebkeeb/rules.mk b/keyboards/weebkeeb/rules.mk deleted file mode 100644 index 55898147dd..0000000000 --- a/keyboards/weebkeeb/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/weebkeeb.c b/keyboards/weebkeeb/weebkeeb.c deleted file mode 100644 index 483fc9440e..0000000000 --- a/keyboards/weebkeeb/weebkeeb.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "weebkeeb.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/weebkeeb/weebkeeb.h b/keyboards/weebkeeb/weebkeeb.h deleted file mode 100644 index 7bca2c2014..0000000000 --- a/keyboards/weebkeeb/weebkeeb.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef WEEBKEEB_H -#define WEEBKEEB_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} - -#endif From 0f71c81df833a282250ecc4e66034320e40b208e Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:37:41 -0500 Subject: [PATCH 4/6] having trouble with conflicts --- keyboards/maxipad/config.h | 15 --------------- keyboards/maxipad/readme.md | 2 -- keyboards/maxipad/rules.mk | 3 --- 3 files changed, 20 deletions(-) diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 4377a892e9..d7a5ef5646 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -32,20 +32,6 @@ along with this program. If not, see . #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -<<<<<<< HEAD -// Planck PCB default pin-out -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#ifdef USE_PRO_MICRO - #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } - #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #else - #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } - #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #endif -======= /* * Keyboard Matrix Assignments * @@ -65,7 +51,6 @@ along with this program. If not, see . //#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } //#define UNUSED_PINS ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 58ed5d718f..861ea2b078 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,6 +1,4 @@ -<<<<<<< HEAD Maxipad keyboard firmware -====================== ## Quantum MK Firmware diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 49bb5f0022..a5c7391523 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -59,7 +59,6 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -<<<<<<< HEAD # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend # NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality @@ -67,7 +66,6 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration # UNICODE_ENABLE ?= YES # Unicode # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID USE_PRO_MICRO ?= yes -======= SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= no # USB Nkey Rollover @@ -76,4 +74,3 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 From d059624bfb32e268ff0972609d7eadbb212fa2d2 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:07:12 +0700 Subject: [PATCH 5/6] Implemented weak ps2_mouse_init_user() There are a lot of PS/2 commands, some are vendor/device specific, so we provide a weak ps2_mouse_init_user() to be implemented in each keyboard that need it. --- tmk_core/protocol/ps2_mouse.c | 54 +++++------------------------------ tmk_core/protocol/ps2_mouse.h | 49 +++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 47 deletions(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index af971dd497..e3c6974440 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,53 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -#define PS2_MOUSE_SEND(command, message) \ -do { \ - uint8_t rcv = ps2_host_send(command); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ - } \ -} while(0) - -#define PS2_MOUSE_SEND_SAFE(command, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_SET_SAFE(command, value, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - PS2_MOUSE_SEND(value, "Sending value"); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_RECEIVE(message) \ -do { \ - uint8_t rcv = ps2_host_recv_response(); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ - } \ -} while(0) - -static enum ps2_mouse_mode_e { - PS2_MOUSE_STREAM_MODE, - PS2_MOUSE_REMOTE_MODE, -} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; - -static report_mouse_t mouse_report = {}; +static report_mouse_t mouse_report = {};./ static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); @@ -108,6 +62,12 @@ void ps2_mouse_init(void) { #ifdef PS2_MOUSE_USE_2_1_SCALING ps2_mouse_set_scaling_2_1(); #endif + + ps2_mouse_init_user(); +} + +__attribute__((weak)) +void ps2_mouse_init_user(void) { } void ps2_mouse_task(void) { diff --git a/tmk_core/protocol/ps2_mouse.h b/tmk_core/protocol/ps2_mouse.h index e11c705fc6..3c93a46342 100644 --- a/tmk_core/protocol/ps2_mouse.h +++ b/tmk_core/protocol/ps2_mouse.h @@ -19,6 +19,53 @@ along with this program. If not, see . #define PS2_MOUSE_H #include +#include "debug.h" + +#define PS2_MOUSE_SEND(command, message) \ +do { \ + uint8_t rcv = ps2_host_send(command); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ + } \ +} while(0) + +#define PS2_MOUSE_SEND_SAFE(command, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_SET_SAFE(command, value, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + PS2_MOUSE_SEND(value, "Sending value"); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_RECEIVE(message) \ +do { \ + uint8_t rcv = ps2_host_recv_response(); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ + } \ +} while(0) + +static enum ps2_mouse_mode_e { + PS2_MOUSE_STREAM_MODE, + PS2_MOUSE_REMOTE_MODE, +} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; /* * Data format: @@ -107,6 +154,8 @@ typedef enum ps2_mouse_sample_rate_e { void ps2_mouse_init(void); +void ps2_mouse_init_user(void); + void ps2_mouse_task(void); void ps2_mouse_disable_data_reporting(void); From 07d29b7d29ce13a22f50270ab54d39f80103cc44 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:22:40 +0700 Subject: [PATCH 6/6] syntax error fix --- tmk_core/protocol/ps2_mouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index e3c6974440..d9ccbecb43 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,7 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -static report_mouse_t mouse_report = {};./ +static report_mouse_t mouse_report = {}; static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report);