[Keymap] Drashna's Hardware Features Experimentations (#6920)

* Change RGBLight pin for Planck Light

Move it to A0, so that the SPI? pins are available for BT hackery

* Add QMK DFU bootloader info

* Add Solenoid

* Disable annoying white LED on bottom

* Enable Solenoid on Corne

* Remove bounds for animations

* Increase debounce for Ergodox EZ to reduce repeat key issues

* Set swap hands key to be a hold-tap key

This way, it's not ANNOYING and doesn't swap the hands inteniontally

* Move MT Alt in Corne keymap

* Re-Add fine tuned control of secrets

* Squash mods to single row

* Add LRA settings to haptic feedback settings for Rev6

* Fix issue with non-Planck EZ keymaps

* Add 40 Percent Nano with Analog Joystick

* Add Collide39 keymap

* Fix OLED printing to be more flavorful

* Fix up Iris GamePad and come cleanup

* Expand OLED char map further

* Add modded characters to keylogger

* Here be dragons

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Fix up rules for community layouts

* Some more OLED tweaks

* Add mod mask check function

* Change QMK DFU Audio pin to be correct

* Use manual STM config instead of CTPC for Collide 39

keyboards/40percentclub/nano/keymaps/drashna/keymap.c

@@ -0,0 +1,111 @@
+#include QMK_KEYBOARD_H
+#include "drashna.h"
+#include "analog.c"
+#include "pointing_device.h"
+#include "pincontrol.h"
+
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+     KC_VOLU, KC_MPLY, KC_MPRV, RESET,
+     KC_VOLD, KC_MUTE, KC_MNXT, RESET
+  ),
+
+};
+
+// Joystick
+// Set Pins
+uint8_t xPin  = 8;   // VRx / /B4
+uint8_t yPin  = 7;   // VRy // B5
+uint8_t swPin = E6;  // SW
+
+// Set Parameters
+uint16_t minAxisValue = 0;
+uint16_t maxAxisValue = 1023;
+
+uint8_t maxCursorSpeed = 2;
+uint8_t precisionSpeed = 1;
+uint8_t speedRegulator = 20;  // Lower Values Create Faster Movement
+
+int8_t xPolarity = 1;
+int8_t yPolarity = 1;
+
+uint8_t cursorTimeout = 10;
+
+int16_t xOrigin, yOrigin;
+
+uint16_t lastCursor = 0;
+
+int16_t axisCoordinate(uint8_t pin, uint16_t origin) {
+    int8_t direction;
+    int16_t distanceFromOrigin;
+    int16_t range;
+
+    int16_t position = analogRead(pin);
+
+    if (origin == position) {
+        return 0;
+    } else if (origin > position) {
+        distanceFromOrigin = origin - position;
+        range              = origin - minAxisValue;
+        direction          = -1;
+    } else {
+        distanceFromOrigin = position - origin;
+        range              = maxAxisValue - origin;
+        direction          = 1;
+    }
+
+    float percent    = (float)distanceFromOrigin / range;
+    int16_t   coordinate = (int16_t)(percent * 100);
+    if (coordinate < 0) {
+        return 0;
+    } else if (coordinate > 100) {
+        return 100 * direction;
+    } else {
+        return coordinate * direction;
+    }
+}
+
+int8_t axisToMouseComponent(uint8_t pin, int16_t origin, uint8_t maxSpeed, int8_t polarity) {
+    int coordinate = axisCoordinate(pin, origin);
+    if (coordinate == 0) {
+        return 0;
+    } else {
+        float percent = (float)coordinate / 100;
+        if (keyboard_report->mods & MOD_BIT(KC_LSFT)) {
+            return percent * precisionSpeed * polarity * (abs(coordinate) / speedRegulator);
+        } else {
+            return percent * maxCursorSpeed * polarity * (abs(coordinate) / speedRegulator);
+        }
+    }
+}
+
+void pointing_device_task(void) {
+    report_mouse_t report = pointing_device_get_report();
+
+    // todo read as one vector
+    if (timer_elapsed(lastCursor) > cursorTimeout) {
+        lastCursor = timer_read();
+        report.x   = axisToMouseComponent(xPin, xOrigin, maxCursorSpeed, xPolarity);
+        report.y   = axisToMouseComponent(yPin, yOrigin, maxCursorSpeed, yPolarity);
+    }
+    //
+    if (!readPin(swPin)) {
+        report.buttons |= MOUSE_BTN1;
+    } else {
+        report.buttons &= ~MOUSE_BTN1;
+    }
+
+    pointing_device_set_report(report);
+    pointing_device_send();
+}
+
+void matrix_init_keymap(void) {
+    // init pin? Is needed?
+    setPinInputHigh(swPin);
+    // Account for drift
+    xOrigin = analogRead(xPin);
+    yOrigin = analogRead(yPin);
+}

keyboards/40percentclub/nano/keymaps/drashna/rules.mk

@@ -0,0 +1,5 @@
+POINTING_DEVICE_ENABLE 		= yes
+RGBLIGHT_ENABLE          	= no
+CONSOLE_ENABLE 				= no
+
+BOOTLOADER 					= qmk-dfu

keyboards/c39/keymaps/drashna/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+// place overrides here
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B7, B1, B0 }

keyboards/c39/keymaps/drashna/keymap.c

@@ -0,0 +1,45 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 1
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_QWERTY] = LAYOUT(
+    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
+    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
+    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
+),
+
+/* FN1
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_FN1] = LAYOUT(
+    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
+    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
+    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
+),
+};

keyboards/c39/keymaps/drashna/readme.md

@@ -0,0 +1,3 @@
+# @drashna's keymap for the C39
+
+HERE BE DRAGONS

keyboards/c39/keymaps/drashna/rules.mk

@@ -0,0 +1,18 @@
+MCU = STM32F303
+BOOTLOADER =
+
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB Enable / Disable

keyboards/crkbd/keymaps/drashna/config.h

@@ -41,7 +41,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 5
-#    define RGBLIGHT_LIMIT_VAL 150
+#    define RGBLIGHT_LIMIT_VAL 120
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
@@ -51,7 +51,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
 #    define RGB_MATRIX_VAL_STEP 5
@@ -60,7 +60,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef AUDIO_ENABLE
 #    define B6_AUDIO
-// #define NO_MUSIC_MODE
+#    define NO_MUSIC_MODE
+#endif
+
+#ifdef HAPTIC_ENABLE
+#    define SOLENOID_PIN B7
 #endif
 
 #undef PRODUCT

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -12,7 +12,25 @@ extern rgblight_config_t rgblight_config;
 static uint32_t        oled_timer = 0;
 static char     keylog_str[6]   = {};
 static uint16_t log_timer       = 0;
-static const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+static const char PROGMEM code_to_name[0xFF] = {
+//   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
+    'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2',  // 1x
+    '3', '4', '5', '6', '7', '8', '9', '0',  20,  19,  27,  26,  22, '-', '=', '[',  // 2x
+    ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ',  // 3x
+    ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ',  16, ' ', ' ', ' ',  // 4x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 5x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 6x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 7x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 8x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 9x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ax
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Bx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Cx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Dx
+    'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ex
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' '        // Fx
+};
 
 void add_keylog(uint16_t keycode);
 #endif
@@ -27,7 +45,7 @@ enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
   ) \
   LAYOUT_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
-    KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    ALT_T(KC_TAB), K11,  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
     OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                                         KC_GRV,  KC_SPC,  BK_LWER, DL_RAIS,  KC_ENT,  OS_RGUI                                      \
   )
@@ -107,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
     VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EEP_RST,
     MG_NKRO, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, RGB_IDL,
-                                     _______, KC_NUKE, _______,        _______, TG_MODS, _______
+                                     HPT_TOG, KC_NUKE, _______,        _______, TG_MODS, HPT_FBK
   )
 };
 // clang-format on
@@ -131,16 +149,18 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
 
 void add_keylog(uint16_t keycode) {
-    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) {
         keycode = keycode & 0xFF;
+    } else if (keycode > 0xFF) {
+        keycode = 0;
     }
 
     for (uint8_t i = 4; i > 0; --i) {
         keylog_str[i] = keylog_str[i - 1];
     }
 
-    if (keycode < 60) {
+    if (keycode < (sizeof(code_to_name) / sizeof(char))) {
-        keylog_str[0] = code_to_name[keycode];
+        keylog_str[0] = pgm_read_byte(&code_to_name[keycode]);
     }
 
     log_timer = timer_read();
@@ -148,7 +168,7 @@ void add_keylog(uint16_t keycode) {
 
 void update_log(void) {
     if (timer_elapsed(log_timer) > 750) {
-        add_keylog(0);
+        //add_keylog(0);
     }
 }
 
@@ -197,19 +217,18 @@ void render_layer_state(void) {
 void render_keylock_status(uint8_t led_usb_state) {
     oled_write_P(PSTR("Lock:"), false);
     oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR("NUM "), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK));
-    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
-    oled_write_P(PSTR("CAPS"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
-    oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR("SCRL"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
 }
 
 void render_mod_status(uint8_t modifiers) {
     oled_write_P(PSTR("Mods:"), false);
-    oled_write_P(PSTR(" SHFT"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR(" CTRL"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
-    oled_write_P(PSTR(" ALT "), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL));
-    oled_write_P(PSTR(" GUI "), (modifiers & MOD_MASK_GUI));
+    oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI));
 }
 
 void render_bootmagic_status(void) {

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -18,6 +18,7 @@ RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
 RGB_MATRIX_ENABLE = WS2812
 
+HAPTIC_ENABLE = SOLENOID
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/keebio/iris/keymaps/drashna/keymap.c

@@ -77,11 +77,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_GAMEPAD] = LAYOUT_wrapper(
-     KC_ESC,  KC_NO,   KC_1,    KC_2,    KC_3,    KC_P,                          _______, _______, _______, _______, _______, _______,
+     KC_ESC,  KC_NO,   KC_1,    KC_2,    KC_3,    KC_4,                          _______, _______, _______, _______, _______, _______,
      KC_F1,   KC_K,    KC_Q,    KC_W,    KC_E,    KC_R,                          _______, _______, _______, _______, _______, _______,
      KC_TAB,  KC_G,    KC_A,    KC_S,    KC_D,    KC_F,                          _______, _______, _______, _______, _______, _______,
      KC_LCTL, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_H,    TG_GAME,     _______, _______, _______, _______, _______, _______, _______,
-                                       LOWER,   KC_V,    KC_SPC,          _______, _______, _______
+                                       KC_GRV,  KC_V,    KC_SPC,          _______, _______, _______
   ),
 
 

keyboards/keebio/iris/keymaps/drashna_lp/config.h

@@ -24,7 +24,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    undef RGBLED_NUM
 #    define RGBLED_NUM 16  // Number of LEDs
 #    undef RGBLED_SPLIT
-#   define RGBLED_SPLIT { 8, 8 }
+#    define RGBLED_SPLIT \
+        { 8, 8 }
 #endif
 
 #undef PRODUCT
@@ -46,3 +47,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ALT_LED1 7
 #undef GUI_LED1
 #define GUI_LED1 8
+
+#define DRASHNA_LP

layouts/community/ergodox/drashna/config.h

@@ -13,6 +13,6 @@
 #define PRODUCT         DrashnaDox - Hacked ErgoDox EZ Shine
 
 #undef DEBOUNCE
-#define DEBOUNCE 15
+#define DEBOUNCE 30
 
 #define TAPPING_TERM_PER_KEY

layouts/community/ergodox/drashna/rules.mk

@@ -2,7 +2,7 @@ TAP_DANCE_ENABLE   = yes
 SLEEP_LED_ENABLE   = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE     = no  # Commands for debug and configuration
 SPACE_CADET_ENABLE = no
-ifneq (,$(findstring ergodox_ez,$(KEYBOARD)))
+ifeq ($(strip $(KEYBOARD)), ergodox_ez)
 	RGBLIGHT_ENABLE   = yes
 	RGB_MATRIX_ENABLE = no
 endif

layouts/community/ergodox/drashna_glow/config.h

@@ -4,3 +4,6 @@
 
 #undef PRODUCT
 #define PRODUCT         DrashnaDox - Hacked ErgoDox EZ Glow
+
+#undef RGB_MATRIX_LED_PROCESS_LIMIT
+#undef RGB_MATRIX_LED_FLUSH_LIMIT

layouts/community/ergodox/drashna_glow/rules.mk

@@ -6,7 +6,7 @@ SRC += $(CORRECTED_LAYOUT)/keymap.c
 
 -include $(CORRECTED_LAYOUT)/rules.mk
 
-ifneq (,$(findstring ergodox_ez,$(KEYBOARD)))
+ifeq ($(strip $(KEYBOARD)), ergodox_ez)
 	RGBLIGHT_ENABLE = no
 	RGB_MATRIX_ENABLE = yes
 #   TAP_DANCE_ENABLE  = no

layouts/community/ortho_4x12/drashna/config.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
-#    define RGB_DI_PIN B3
+#    define RGB_DI_PIN A0
 #    define RGBLED_NUM 13  // Number of LEDs
 #    define RGBLIGHT_ANIMATIONS
 #    define RGBLIGHT_HUE_STEP 12
@@ -21,6 +21,8 @@
 // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    undef RGB_MATRIX_LED_PROCESS_LIMIT
+#    undef RGB_MATRIX_LED_FLUSH_LIMIT
 #endif
 
 #if defined(KEYBOARD_lets_split_rev2)
@@ -33,6 +35,16 @@
 #    ifdef RGBLIGHT_ENABLE
 #        define NO_MUSIC_MODE
 #    endif                     // RGBLIGHT_ENABLE
+#else
+#    undef QMK_ESC_OUTPUT
+#    define QMK_ESC_OUTPUT E6  // usually COL
+#    undef QMK_ESC_INPUT
+#    define QMK_ESC_INPUT B0  // usually ROW
+#    undef QMK_LED
+#    define QMK_LED D6
+#    undef QMK_SPEAKER
+#    define QMK_SPEAKER B5
+#    define SOLENOID_PIN A1
 #endif      // KEYBOARD_planck_light
 
 #if defined(KEYBOARD_planck)
@@ -69,3 +81,50 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* default 3V ERM vibration motor voltage and library*/
+#if FB_ERM_LRA == 0
+#define RATED_VOLTAGE 3
+#define V_RMS 2.3
+#define V_PEAK 3.30
+/* Library Selection */
+#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+/* default 2V LRA voltage and library */
+#elif FB_ERM_LRA == 1
+#define RATED_VOLTAGE 2
+#define V_RMS 2.0
+#define V_PEAK 2.85
+#define F_LRA 200
+/* Library Selection */
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+#endif
+
+/* Control 1 register settings */
+#define DRIVE_TIME 25
+#define AC_COUPLE 0
+#define STARTUP_BOOST 1
+
+/* Control 2 Settings */
+#define BIDIR_INPUT 1
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#define SAMPLE_TIME 3
+#define BLANKING_TIME 1
+#define IDISS_TIME 1
+
+/* Control 3 settings */
+#define NG_THRESH 2
+#define ERM_OPEN_LOOP 1
+#define SUPPLY_COMP_DIS 0
+#define DATA_FORMAT_RTO 0
+#define LRA_DRIVE_MODE 0
+#define N_PWM_ANALOG 0
+#define LRA_OPEN_LOOP 0
+/* Control 4 settings */
+#define ZC_DET_TIME 0
+#define AUTO_CAL_TIME 3

layouts/community/ortho_4x12/drashna/keymap.c

@@ -24,7 +24,9 @@ extern rgblight_config_t rgblight_config;
 #ifdef BACKLIGHT_ENABLE
 enum planck_keycodes {
     BACKLIT = NEW_SAFE_RANGE,
+    TH_LVL,
 };
+
 #else
 #    define BACKLIT OSM(MOD_LSFT)
 enum planck_keycodes {
@@ -134,7 +136,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
     VRSN,    _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
     TH_LVL,  _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL,
-    _______, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS
+    HPT_TOG, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS
   )
 
 };
@@ -298,6 +300,9 @@ void rgb_matrix_indicators_user(void) {
 }
 
 void matrix_init_keymap(void) {
+#    ifdef KEYBOARD_planck_light
+    writePinLow(D6);
+#    endif
     // rgblight_mode(RGB_MATRIX_MULTISPLASH);
 }
 #else  // RGB_MATRIX_INIT

layouts/community/ortho_4x12/drashna/rules.mk

@@ -7,18 +7,19 @@ TAP_DANCE_ENABLE  = no
 AUDIO_ENABLE      = yes
 SPACE_CADET_ENABLE = no
 
-ifeq (,$(findstring planck/rev6,$(KEYBOARD))) # Make sure it's NOT the Planck Rev6
+ifneq ($(strip $(KEYBOARD)), planck/rev6)
 	RGBLIGHT_ENABLE             = yes
 	INDICATOR_LIGHTS            = yes
 	RGBLIGHT_TWINKLE            = yes
 	RGBLIGHT_STARTUP_ANIMATION  = yes
 endif
-ifneq (,$(findstring planck/light,$(KEYBOARD))) # Make sure it IS the Planck Light
+ifeq ($(strip $(KEYBOARD)), planck/light)
 	RGB_MATRIX_ENABLE           = yes
 	RGBLIGHT_ENABLE             = no
 	RGBLIGHT_STARTUP_ANIMATION  = no
+	HAPTIC_ENABLE               += SOLENOID
 endif
-ifneq (,$(findstring planck/ez,$(KEYBOARD))) # Make sure it IS the Planck Light
+ifeq ($(strip $(KEYBOARD)), planck/ez)
 	RGBLIGHT_ENABLE = no
 	# SERIAL_LINK_ENABLE = yes
 	ENCODER_ENABLE = yes

layouts/community/ortho_5x12/drashna/rules.mk

@@ -5,7 +5,7 @@ CONSOLE_ENABLE    = no         # Console for debug(+400)
 COMMAND_ENABLE    = no        # Commands for debug and configuration
 TAP_DANCE_ENABLE  = no
 AUDIO_ENABLE      = yes
-ifneq (,$(findstring fractal,$(KEYBOARD))) # Make sure it IS the Planck Light
+ifeq ($(strip $(KEYBOARD)), fractal)
 	RGB_MATRIX_ENABLE   = no
 	AUDIO_ENABLE        = yes
 	RGBLIGHT_ENABLE     = yes

users/drashna/drashna.c

@@ -219,3 +219,10 @@ void eeconfig_init_user(void) {
     eeconfig_init_keymap();
     keyboard_init();
 }
+
+bool hasAllBitsInMask(uint8_t value, uint8_t mask) {
+    value &= 0xF;
+    mask &= 0xF;
+
+    return (value & mask) == mask;
+}

users/drashna/drashna.h

@@ -60,6 +60,7 @@ layer_state_t layer_state_set_keymap(layer_state_t state);
 layer_state_t default_layer_state_set_keymap(layer_state_t state);
 void          led_set_keymap(uint8_t usb_led);
 void          eeconfig_init_keymap(void);
+bool          hasAllBitsInMask(uint8_t value, uint8_t mask);
 
 typedef union {
     uint32_t raw;

users/drashna/process_records.h

@@ -57,9 +57,11 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record);
 #define KC_RST KC_RESET
 
 #ifdef SWAP_HANDS_ENABLE
-#    define KC_C1R3 SH_TT
+#    define KC_C1R3 SH_T(KC_TAB)
+#elif defined(DRASHNA_LP)
+#    define KC_C1R3 TG(_GAMEPAD)
 #else  // SWAP_HANDS_ENABLE
-#    define KC_C1R3 KC_BSPC
+#    define KC_C1R3 KC_TAB
 #endif  // SWAP_HANDS_ENABLE
 
 #define BK_LWER LT(_LOWER, KC_BSPC)

users/drashna/rules.mk

@@ -4,9 +4,14 @@ SRC += drashna.c \
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 SPACE_CADET_ENABLE            = no
 
+ifneq ($(strip $(NO_SECRETS)), yes)
 	ifneq ("$(wildcard $(USER_PATH)/secrets.c)","")
     	SRC += secrets.c
 	endif
+	ifeq ($(strip $(NO_SECRETS)), lite)
+		OPT_DEFS += -DNO_SECRETS
+	endif
+endif
 
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
     SRC += tap_dances.c
@@ -14,9 +19,7 @@ endif
 
 
 
-ifeq ($(strip $(NO_SECRETS)), yes)
+
-    OPT_DEFS += -DNO_SECRETS
-endif
 
 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     SRC += rgb_stuff.c